Re: [PATCH 1/1] Zynq: add support to chainload another barebox

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Michael,
Hello Lucas,

On 05.05.21 10:15, Lucas Stach wrote:
> Hi Michael,
> 
> Am Montag, dem 03.05.2021 um 10:07 +0000 schrieb Michael Graichen:
>> Since OCRAM is only 192K this introduces CONFIG_ZYNQ_BUILD_FSBL so we can can chainload a more feature rich barebox via bootm.
>>
>> From 1f1a95eca42198d73c38cc12b9b44f061980cef8 Mon Sep 17 00:00:00 2001
>> From: Michael Graichen <michael.graichen@xxxxxxxxxxx>
>> Date: Mon, 3 May 2021 12:03:05 +0200
>> Subject: [PATCH] zynq: add support to chainload another barebox
> 
> Seems you imported this patch from somewhere and it left some traces in
> the commit message?
> 
> Also I don't understand what this change is supposed to be doing. You
> are building just another Barebox binary, with no real differences in
> the configuration. I would much prefer a proper 2-stage loading in the
> PBL, but that requires FAT support for the SDcard boot, which I didn't
> get around to take a look at yet.

For the record, we now have two platforms where we do FAT in PBL, which
could be used as template:
 * arch/arm/boards/sama5d27*
 * arch/arm/boards/microchip-ksz9477-evb

There are more that build two barebox images with separate configs, but
recommendation is to do it in PBL, because you can then build both images
at once.

Cheers,
Ahmad
> 
> Regards,
> Lucas
> 
>> Signed-off-by: Michael Graichen <michael.graichen@xxxxxxxxxxx>
>> ---
>>  arch/arm/mach-zynq/Kconfig |  6 +++++-
>>  images/Makefile.zynq       | 21 +++++++++++++++------
>>  2 files changed, 20 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
>> index 3e07633e5..0800b55e6 100644
>> --- a/arch/arm/mach-zynq/Kconfig
>> +++ b/arch/arm/mach-zynq/Kconfig
>> @@ -21,7 +21,11 @@ config ARCH_ZYNQ7000
>>  	select OFDEVICE
>>  	select RELOCATABLE
>>
>> -
>> +config ZYNQ_BUILD_FSBL
>> +	prompt "build FSBL binary (BOOT.BIN)"
>> +	bool
>> +	help
>> +	  Say Y here if you want to build an FSBL binary for the Zynq.
>>
>>  menu "select Zynq boards to be built"
>>
>> diff --git a/images/Makefile.zynq b/images/Makefile.zynq
>> index b00e74869..39c72bd88 100644
>> --- a/images/Makefile.zynq
>> +++ b/images/Makefile.zynq
>> @@ -7,17 +7,26 @@ zynqcfg_cpp_flags  = -Wp,-MD,$(depfile) -nostdinc -x assembler-with-cpp \
>>
>>  zynqcfg-tmp = $(subst $(comma),_,$(dot-target).zynqcfg.tmp)
>>
>> -quiet_cmd_zynq_image = ZYNQIMG  $@
>> +quiet_cmd_zynq_image = ZYNQIMG $@
>>        cmd_zynq_image = \
>>           $(CPP) $(zynqcfg_cpp_flags) -o $(zynqcfg-tmp) $(CFG_$(@F)) ; \
>>           $(objtree)/scripts/zynq_mkimage -c $(zynqcfg-tmp) \
>> -           -f $(subst .zynqimg,,$@) -o $@
>> +           -f $(subst .zynqimg_fsbl,,$@) -o $@
>>
>> -$(obj)/%.zynqimg: $(obj)/% FORCE
>> +$(obj)/%.zynqimg_fsbl: $(obj)/% FORCE
>>  	$(call if_changed,zynq_image)
>>
>>  #------------------------------------------------------------------------------
>>
>> -CFG_start_avnet_zedboard.pblb.zynqimg = $(board)/avnet-zedboard/zedboard.zynqcfg
>> -FILE_barebox-avnet-zedboard.img = start_avnet_zedboard.pblb.zynqimg
>> -image-$(CONFIG_MACH_ZEDBOARD) += barebox-avnet-zedboard.img
>> +FILE_barebox-avnet-zedboard.img = start_avnet_zedboard.pblb
>> +zynq-barebox-$(CONFIG_MACH_ZEDBOARD) += barebox-avnet-zedboard.img
>> +
>> +CFG_start_avnet_zedboard.pblb.zynqimg_fsbl = $(board)/avnet-zedboard/zedboard.zynqcfg
>> +FILE_barebox-avnet-zedboard-fsbl.img = start_avnet_zedboard.pblb.zynqimg_fsbl
>> +zynq-fsbl-$(CONFIG_MACH_ZEDBOARD) += barebox-avnet-zedboard-fsbl.img
>> +
>> +ifdef CONFIG_ZYNQ_BUILD_FSBL
>> +image-y += $(zynq-fsbl-y)
>> +else
>> +image-y += $(zynq-barebox-y)
>> +endif
>> --
>> 2.25.1
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@xxxxxxxxxxxxxxxxxxx
>> http://lists.infradead.org/mailman/listinfo/barebox
> 
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox




[Index of Archives]     [Linux Embedded]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]

  Powered by Linux