Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- Re: [PATCH 1/1] OMAP: DISPC: Fix to disable also interface clocks. 2nd.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM:OMAP2: irda support 3430
- From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
- Re: [PATCH 1/1] OMAP: DISPC: Fix to disable also interface clocks. 2nd.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/6] 34XX: PM: Workaround to check wether any fck is active before entering sleep
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] CBUS: A workaround for ADC S/H HW bug: always keep ch 8 selected when S/H is used
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/3] OMAP3: EVM: KEYPAD: Fix Kconfig dependency
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] OMAP3: EVM: KEYPAD: Add twl4030 keypad driver support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/6] OMAP: PM: Add new sysfs option for disabling clocks when entering idle
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RESEND][PATCH]Separate out 3430 LCD panel support from 2430 file
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] driver: irda support 3430
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP: Store switch state for OUTPUT gpio-switches
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- On vacation in July
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] omap: hsmmc: Avoid NULL pointer dereference
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] OMAP3: EVM: KEYPAD: Add twl4030 keypad to defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [RFC][PATCH] input: keypad: General fixes to omap-twl4030keypad.c
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [Resending - PATCH 3/3] Triton BCI driver for OMAP3430 - USB changes
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- [Resending - PATCH 2/3] Triton BCI driver for OMAP3430
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- [Resending - PATCH 1/3] Triton BCI driver device setup for OMAP3430
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- Re: [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: "Ramesh Gupta G" <x0023949@xxxxxx>
- Re: [PATCH 2/2] ARM:OMAP2: irda support 3430
- From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
- RE: [PATCH 00/11] OMAP3 CPUidle patches
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 2/2] ARM:OMAP2: irda support 3430
- From: "Girish S G" <girishsg@xxxxxx>
- RE: [PATCH 00/11] OMAP3 CPUidle patches
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH] OMAP3 CPUidle patches - fixes
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- RE: [PATCH] MTD: OMAP2-NAND: Fix partition reading from board info
- From: "Kamat, Nishant" <nskamat@xxxxxx>
- Re: [PATCH 00/11] OMAP3 CPUidle patches
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- [PATCH 1/2] driver: irda support 3430
- From: "Girish. S. G." <girishsg@xxxxxx>
- [PATCH 2/2] ARM:OMAP2: irda support 3430
- From: "Girish. S. G." <girishsg@xxxxxx>
- [PATCH 0/2] IrDA support for 3430
- From: "Girish. S. G." <girishsg@xxxxxx>
- Re: Suggestion required to switch to a new kernel
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Suggestion required to switch to a new kernel
- From: suresh@xxxxxxxxxxxxxxxxxxxx
- Re: Kernel hang on OMAP3 based Beagle board, RTC issue?
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: Kernel hang on OMAP3 based Beagle board, RTC issue?
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Kernel hang on OMAP3 based Beagle board, RTC issue?
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: [PATCH 00/11] OMAP3 CPUidle patches
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- RE: [PATCH 11/11] CORE context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 1/1] twl4030-madc: Fix arbitrarily initialized function pointer
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 11/11] CORE context save/restore
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 00/11] OMAP3 CPUidle patches
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 02/11] per/neon and core handling in idle
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- [PATCH 0/1] twl4030-madc: Fix arbitrarily initialized function pointer
- From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
- [PATCH 1/1] twl4030-madc: Fix arbitrarily initialized function pointer
- From: Viktor Rosendahl <viktor.rosendahl@xxxxxxxxx>
- RE: [PATCH 11/11] CORE context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 00/11] OMAP3 CPUidle patches
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- RE: [PATCH 06/11] mpu off state enabled
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- RE: [PATCH 02/11] per/neon and core handling in idle
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 11/11] CORE context save/restore
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 01/11] Basic cpuidle driver
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [RESEND][PATCH]Separate out 3430 LCD panel support from 2430 file
- Re: [PATCH 06/11] mpu off state enabled
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 05/11] scratchpad contents
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 02/11] per/neon and core handling in idle
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 01/11] Basic cpuidle driver
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- [patch 2.6.26-mmotm] rtc: rtc-omap footprint shrinkage
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] MTD: OMAP2-NAND: Fix partition reading from board info
- From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
- Re: TSC2004 touch driver
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: TSC2004 touch driver
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [PATCH 01/11] Basic cpuidle driver
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 09/11] gpio context save/restore
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- TSC2004 touch driver
- From: Peter Barada <peterb@xxxxxxxxxxx>
- Re: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
- From: "Bryan Wu" <cooloney@xxxxxxxxxx>
- [PATCH] MTD: OMAP2-NAND: Fix partition reading from board info
- From: "Kamat, Nishant" <nskamat@xxxxxx>
- [PATCH 11/11] CORE context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 10/11] i2c context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 09/11] gpio context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 08/11] serial context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 07/11] gpmc context save/restore
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 06/11] mpu off state enabled
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 00/11] OMAP3 CPUidle patches
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 05/11] scratchpad contents
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 04/11] sdrc register defs
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 03/11] menuconfig updates for cpuidle
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 02/11] per/neon and core handling in idle
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 01/11] Basic cpuidle driver
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- RE: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [PATCH 1/1] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 1/1] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 1/1] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 0/1] musb configs
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- RE: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH 1/1] This patch adds backlight control for omap3evm
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 0 /1] Backlight control for omap3evm
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 1/1] OMAP: DISPC: Fix to disable also interface clocks. 2nd.
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- Re: [PATCH] OMAP: DISPC: Fix to disable also interface clocks
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH] OMAP: DISPC: Fix to disable also interface clocks
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP: Add support to Nokia N810 WiMAX
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH] OMAP: DISPC: Fix to disable also interface clocks
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH 1/1]smc911x Modify driver to also work with omap24xx
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [PATCH 0/1] net:smc911x Modify driver to also work with omap24xx
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [Resend][PATCH 3/3] Added ethernet driver support in defconfig
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [Resend][PATCH 2/3] net:smc911x Modify driver to also work with omap24xx
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [Resend][PATCH 1/3] OMAP2EVM: Adding ethernet support
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [resend][PATCH 0/3] Adding ethernet support on omap2evm
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] omap: hsmmc: Avoid NULL pointer dereference
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH] OMAP: USB EHCI: Support final revision of USB board
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- [PATCH] OMAP: Store switch state for OUTPUT gpio-switches
- From: Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx>
- [PATCH] CBUS: A workaround for ADC S/H HW bug: always keep ch 8 selected when S/H is used
- From: Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx>
- RE: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- RE: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
- RE: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [RFC][PATCH] usb: musb: pass configuration specifics via pdata
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
- From: "Bryan Wu" <cooloney@xxxxxxxxxx>
- Re: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH 6/6] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 1/6] 34XX: PM: Workaround to reset all wkdeps
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 4/6] 34XX: PM: Workaround for taking care of gpio clocks
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 2/6] 34XX: PM: Workaround to check wether any fck is active before entering sleep
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 5/6] Added sleep support to UART
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 3/6] OMAP: PM: Add new sysfs option for disabling clocks when entering idle
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 0/6] 34XX: PM: Workarounds to get omap3 to retention 4th.
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
- From: David Brownell <david-b@xxxxxxxxxxx>
- OMAP Dspbridge: Api and samples tarball
- From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
- gpio bug for 34xx
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: N810 power problems, bootloader upgrade, won't boot
- From: green <greenfreedom10@xxxxxxxxx>
- [PATCH v3] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: FW: [PATCH 00/05] 34XX cpu idle patches - core off
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- simultaneous display on lcd and tv
- From: Naveen Banad <naveen.banad@xxxxxxxxxxx>
- [Resending PATCH 2/2] ARM: OMAP2: RTC board specific code: rebased
- From: "Girish. S. G." <girishsg@xxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: N810 power problems, bootloader upgrade, won't boot
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 2/7] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 2/7] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: N810 power problems, bootloader upgrade, won't boot
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: camera isp driver status?
- From: "Ivan T. Ivanov" <iivanov@xxxxxxxxxx>
- RE: [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: Paul Walmsley <paul@xxxxxxxxx>
- N810 power problems, bootloader upgrade, won't boot
- From: green <greenfreedom10@xxxxxxxxx>
- Re: undefined instruction
- From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
- Re: undefined instruction
- From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
- Re: Latest git kernel won't build with muru.com N8x0 patch 2
- From: green <greenfreedom10@xxxxxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- RE: [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- RE: [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: undefined instruction
- From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: undefined instruction
- From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Miguel Aguilar <miguel.aguilar@xxxxxxxxxxxx>
- camera isp driver status?
- From: Ram <vshrirama@xxxxxxxxx>
- [PATCH] Remove double MODULE_ALIAS declaration.
- From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
- RE: V4L on OMAP3
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- Re: [PATCH 0/2] Add clock post-rate-change notifier
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: DPLL{1,2}_FCLK clksel can divide by 4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: fix DPLL jitter correction and rate programming
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: do not block sleep patch
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/4] OMAP3: fix powerdomain hardware save-and-restore support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: do not block sleep patch
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- do not block sleep patch
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 1/1] ARM: OMAP: SmartReflex driver: enable in omap_3430sdp_defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/7] 34XX: PM: Workaround for taking care of gpio clocks
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 6/7] 34XX: PM: Workaround for taking care of gpio clocks
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 6/7] 34XX: PM: Workaround for taking care of gpio clocks
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 6/7] 34XX: PM: Workaround for taking care of gpio clocks
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- RE: [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: V4L on OMAP3
- From: Ajit Motra <motraat@xxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: V4L on OMAP3
- From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
- V4L on OMAP3
- From: Ajit Motra <motraat@xxxxxxxxxxxxxxxxx>
- Re: tslib on OMAP3
- From: Tom Cooksey <thomas.cooksey@xxxxxxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 4/4] OMAP2 clock: check register address in omap2_clk_wait_ready()
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/4] OMAP3 clock: OMAP3430ES2+ has SSI target idlest bit
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/4] OMAP3 clock: fix omap2_clk_wait_ready() for OMAP3430ES2+ DSS
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/4] OMAP2/3 clock: clean up omap2_clk_wait_ready()
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/4] OMAP2/3 clock: fix some bugs in omap2_clk_wait_ready()
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: tslib on OMAP3
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: "arun c" <arun.edarath@xxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 2/7] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 4/4] OMAP3 PM: enable hardware SAR for USBHOST, USBTLL modules
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 3/4] OMAP3 pwrdm: add CORE SAR handling (for USBTLL module)
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/4] OMAP3: fix powerdomain hardware save-and-restore support
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 2/4] OMAP3: move USBHOST SAR handling from clock framework to powerdomain layer
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/4] OMAP3 pwrdm: add hardware save-and-restore (SAR) support
- From: Paul Walmsley <paul@xxxxxxxxx>
- RE: Latest git kernel won't build with muru.com N8x0 patch 2
- From: "Hunter, Jon" <jon-hunter@xxxxxx>
- Re: Latest git kernel won't build with muru.com N8x0 patch 2
- From: green <greenfreedom10@xxxxxxxxx>
- [PATCH 3/3] OMAP3: EVM: KEYPAD: Add twl4030 keypad to defconfig
- From: Miguel Aguilar <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 2/3] OMAP3: EVM: KEYPAD: Fix Kconfig dependency
- From: Miguel Aguilar <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 1/3] OMAP3: EVM: KEYPAD: Add twl4030 keypad driver support
- From: Miguel Aguilar <miguel.aguilar@xxxxxxxxxxxx>
- RE: tslib on OMAP3
- From: "Arce, Abraham" <x0066660@xxxxxx>
- tslib on OMAP3
- From: Tom Cooksey <thomas.cooksey@xxxxxxxxxxxxx>
- RE: undefined instruction
- From: "Hunter, Jon" <jon-hunter@xxxxxx>
- Re: [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 2/2] Dynamic allocation for mcbsp devices. and related changes
- From: "chandra shekhar" <x0044955@xxxxxx>
- [PATCH 1/2] Dynamic allocation for mcbsp devices. and related changes
- From: "chandra shekhar" <x0044955@xxxxxx>
- [PATCH 0/2] Dynamic allocation for mcbsp devices. and related changes
- From: "chandra shekhar" <x0044955@xxxxxx>
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Dmitry Krivoschekov <dmitry.krivoschekov@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: "arun c" <arun.edarath@xxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: Reverted 5728b4a3ba5ace557263e5ccb0bc7829e543acf5
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 0/7] 34XX: PM: Workarounds to get omap3 to retention 3rd.
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 0/7] 34XX: PM: Workarounds to get omap3 to retention 3rd.
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- RE: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Reverted 5728b4a3ba5ace557263e5ccb0bc7829e543acf5
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] OMAP3:devices.c: Enabling 4-bit for SD card
- From: "Kumar, Purushotam" <purushotam@xxxxxx>
- Re: [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 7/7] Added sleep support to UART
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 5/7] OMAP: PM: Add new sysfs option for disabling clocks when entering idle
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 4/7] 34XX: PM: Workaround to check wether any fck is active before entering sleep
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 2/7] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 6/7] 34XX: PM: Workaround for taking care of gpio clocks
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 1/7] 34XX: PM: Workaround to build omap hsmmc as a module
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 3/7] 34XX: PM: Workaround to reset all wkdeps
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 0/7] 34XX: PM: Workarounds to get omap3 to retention 3rd.
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- undefined instruction
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [PATCH] PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- Latest git kernel won't build with muru.com N8x0 patch 2
- From: green <greenfreedom10@xxxxxxxxx>
- standalone osk
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: Arun KS <arunks@xxxxxxxxxxxxxxxxxxxx>
- Re: [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 3/3] OMAP3: EVM: KEYPAD: Add twl4030 keypad to defconfig
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 2/3] OMAP3: EVM: KEYPAD: Fix Kconfig dependency
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 1/3] OMAP3: EVM: Add twl4030 keypad driver support
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- Re: [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: "Ramesh Gupta G" <x0023949@xxxxxxxxxxxxxxxxxx>
- Re: [Resend] [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [PATCH 3/3] OMAP2EVM: add ethernet support in defconfig
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [ PATCH 2/3 ] net:smc911x Modify driver to also work with omap24xx
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 1/3] OMAP2EVM: add ethernet support (smc911x)
- From: "Arun KS" <getarunks@xxxxxxxxx>
- [PATCH 1/1] PM debug support for 34xx
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 1/2] Triton Battery charger interface driver forOMAP3430
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- Re: [RFC/PATCH 1/2] Triton Battery charger interface driver for OMAP3430
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/8] PRCM: Workaround for pwrdn_x control
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 2/8] PRCM: Workaround for pwrdn_x control
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP3 clock: DPLL{1,2}_FCLK clksel can divide by 4
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP3 clock: fix DPLL jitter correction and rate programming
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/1] ARM: OMAP: SmartReflex driver: enable in omap_3430sdp_defconfig
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- [PATCH 0/1] ARM: OMAP: SmartReflex driver: enable in omap_3430sdp_defconfig
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH v2] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 3/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 1/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 2/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- [PATCH 3/3] OMAP3 EVM: Add twl4030 keypad driver support
- From: Miguel Angel Aguilar Ulloa <miguel.aguilar@xxxxxxxxxxxx>
- Re: [PATCH v2] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- [PATCH v2] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: DSP BIOS Link support on OMAP3430
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: DSP BIOS Link support on OMAP3430
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 1/2] Triton Battery charger interface driver for OMAP3430
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [RFC/PATCH 2/2] Triton Battery charger interface driver for OMAP3430
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- Re: [RFC/PATCH 1/2] Triton Battery charger interface driver for OMAP3430
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- Re: [PATCH] i2c: twl4030: warning: mixed declarations and code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3:devices.c: Enabling 4-bit for SD card
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] Renaming files to reflect name change from 2430OSK to OMAP2EVM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] usb: musb: MUSB_OTG should depend on PM
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 1/2] usb: musb: MUSB_OTG should depend on PM
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] usb: musb: ignore disconnect on suspend
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 4/4] i2c: add MODULE_ALIAS to twl4030 drivers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/4] i2c: allow twl modules to be built as modules
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/4] usb: musb: add MODULE_ALIAS for udev module loading
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP: SmartReflex driver integration
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] USB: H4/OHCI/ISP1301 fixes
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH] USB: H4/OHCI/ISP1301 fixes
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] The fix prevents kernel crash caused by twl4030 power button malfunction.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 0/3] Updates for tea5761 (take #3)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/1] ARM:OMAP: fix driver MODULE_ALIAS()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/21] ARM: OMAP: McBSP: Prepare for splitting intoomap1 and omap2 code
- From: "shekhar, chandra" <x0044955@xxxxxx>
- Re: [PATCH 11/21] ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 10/21] ARM: OMAP: McBSP: Coding style cleanup on arch/arm/plat-omap/mcbsp.c
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 2/2] Triton Battery charger interface driver for OMAP3430
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [RFC/PATCH 1/2] Triton Battery charger interface driver for OMAP3430
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH v2] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH v2] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 19/21] ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 08/21] ARM: OMAP: SRAM: Move omap2 sram-fn.S to sram242x.S
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 07/21] ARM: OMAP: SRAM: Move sram-fn.S from plat-omap to mach-omap1
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 06/21] ARM: OMAP: DMA: Clean-up code
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 05/21] ARM: OMAP: DMA: Remove __REG access
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 01/02] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [PATCH] ARM: OMAP3: Fix warnings in clock34xx.h
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- DVFS, DPS and SLM on omap3
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP3 clock: fix omap2_clk_wait_ready for OMAP3430ES2 DSS
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: Boot failure on OMAP 3430 SDP
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- RE: Boot failure on OMAP 3430 SDP
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: Boot failure on OMAP 3430 SDP
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- Re: Video playback on osk with linux-2.6.18
- From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
- Re: Video playback on osk with linux-2.6.18
- From: "Peter Teoh" <htmldeveloper@xxxxxxxxx>
- [PATCH 2/2] implement clock dynamic notifier array
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/2] add common post-rate-change notifier code
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 0/2] Add clock post-rate-change notifier
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Boot failure on OMAP 3430 SDP
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: FW: [PATCH] suppress needless timer reprogramming {tick-sched.c} - test/comment
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [RFC/PATCH 2/2] Triton Battery charger interface driver for OMAP3430
- From: x0070977@xxxxxxxxxxxxxxxxxx
- [RFC/PATCH 1/2] Triton Battery charger interface driver for OMAP3430
- From: x0070977@xxxxxxxxxxxxxxxxxx
- [RFC/PATCH 0/2] Triton Battery charger interface driver for OMAP3430
- From: x0070977@xxxxxxxxxxxxxxxxxx
- RE: FW: [PATCH] suppress needless timer reprogramming {tick-sched.c} - test/comment
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: FW: [PATCH] suppress needless timer reprogramming {tick-sched.c} - test/comment
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: FW: [PATCH] suppress needless timer reprogramming {tick-sched.c} - test/comment
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- FW: [PATCH] suppress needless timer reprogramming {tick-sched.c} - test/comment
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [PATCH 1/2] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH] OMAP PM interface, version 2
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH] OMAP PM interface, version 2
- From: Paul Walmsley <paul@xxxxxxxxx>
- Video playback on osk with linux-2.6.18
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [PATCH] suppress needless timer reprogramming {tick-sched.c}
- From: David Brownell <david-b@xxxxxxxxxxx>
- Re: [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: "Ramesh Gupta G" <x0023949@xxxxxx>
- RE: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
- Re: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP PM interface, version 2
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [RFC/PATCH 0/4] McBSP support for 34XX
- From: "shekhar, chandra" <x0044955@xxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [RFC/PATCH 1/4] McBSP support for 34XX
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [RFC/PATCH 0/4] McBSP support for 34XX
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- RE: JFFS2 Cleanmarker issue
- From: "Praveen BP" <praveenbp@xxxxxxxxxxxxxxxxxxxx>
- testers wanted: isp1301_omap conversion to new-style i2c driver
- From: Jean Delvare <khali@xxxxxxxxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- RE: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH 21/21] ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP2/3 PM: Add OMAP PM no-op layer
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] OMAP PM interface, version 2
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH] The fix prevents kernel crash caused by twl4030 power button malfunction.
- From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
- Re: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
- Re: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 15/16] ARM: OMAP2: Add minimal omap3430 support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 11/21] ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 19/21] ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 08/21] ARM: OMAP: SRAM: Move omap2 sram-fn.S to sram242x.S
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 07/21] ARM: OMAP: SRAM: Move sram-fn.S from plat-omap to mach-omap1
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 7/8] 34XX: PM: Workaround to disable mmc
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 4/8] 34XX: PM: Workaround to enable autoidle for clocks and plls
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 8/8] Added sleep support to UART
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 6/8] 34XX: PM: Workaround to check wether any fck is active before entering sleep
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 5/8] 34XX: PM: Workaround to reset all wkdeps
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 2/8] PRCM: Workaround for pwrdn_x control
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 3/8] 34XX: PM: Workaround for missing smartreflex driver
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 1/8] 34XX: PM: Workaround for taking care of gpio clocks
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- [PATCH 0/8] 34XX: PM: Workarounds to get omap3 to retention 2nd.
- From: jouni.hogander@xxxxxxxxx (Högander Jouni)
- Re: [PATCH 06/21] ARM: OMAP: DMA: Clean-up code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 05/21] ARM: OMAP: DMA: Remove __REG access
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] ARM: OMAP: SmartReflex driver integration
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- [PATCH 1/2] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- [PATCH 0/2] ARM: OMAP: SmartReflex driver (rev. 4)
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 03/21] ARM: OMAP: Add OMAP3430 base defines
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 01/02] OMAP3 CPUidle driver
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- Re: [PATCH 01/02] OMAP3 CPUidle driver
- From: Kevin Hilman <khilman@xxxxxxxxxx>
- Re: unknown partition table
- From: Suresh Rajashekara <suresh@xxxxxxxxxxxxxxxxxxxx>
- unknown partition table
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: armv7a Makefile: change -march flag to "armv7-a" so gcc 4.3.x works
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: James Chapman <jchapman@xxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: ppp on 2.6.18
- From: James Carlson <carlsonj@xxxxxxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: James Chapman <jchapman@xxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: James Carlson <carlsonj@xxxxxxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP: armv7a Makefile: change -march flag to "armv7-a" so gcc 4.3.x works
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] OMAP3:devices.c: Enabling 4-bit for SD card
- From: Purushotam Kumar <a0876542@xxxxxxxxxxxx>
- Re: [RFC/PATCH 2/4] McBSP support for 34XX
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: ppp on 2.6.18
- From: James Chapman <jchapman@xxxxxxxxxxx>
- Re: [RFC/PATCH 1/4] McBSP support for 34XX
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- ppp on 2.6.18
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- [RFC/PATCH 3/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [RFC/PATCH 4/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [RFC/PATCH 3/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [RFC/PATCH 2/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [RFC/PATCH 1/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [RFC/PATCH 0/4] McBSP support for 34XX
- From: "Chandra shekhar" <x0044955@xxxxxx>
- Re: [PATCH 01/02] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH] Added sleep support to UART
- From: <Tero.Kristo@xxxxxxxxx>
- RE: pad configuration register doubt
- From: "Azbell, Brandon" <b-azbell@xxxxxx>
- pad configuration register doubt
- From: "chandru vijayashankar" <chandru.vijayshankar@xxxxxxxxx>
- Re: [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 21/21] ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 20/21] ARM: OMAP: Turn CM and PRM access into functions
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 19/21] ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 18/21] ARM: OMAP: Remove __REG access for multi-omap
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 02/21] ARM: OMAP: DMTimer: Optimize by adding load and start
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 10/21] ARM: OMAP: McBSP: Coding style cleanup on arch/arm/plat-omap/mcbsp.c
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 11/21] ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 06/21] ARM: OMAP: DMA: Clean-up code
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 08/21] ARM: OMAP: SRAM: Move omap2 sram-fn.S to sram242x.S
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 05/21] ARM: OMAP: DMA: Remove __REG access
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 04/21] ARM: OMAP: DMA: Make channels dynamic for multi-boot
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 02/02] ARM: OMAP: Correcting the gpmc prefetch control register address
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 01/02] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 03/21] ARM: OMAP: Add OMAP3430 base defines
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 02/02] ARM: OMAP: Correcting the gpmc prefetch control register address
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH 01/02] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: SDMA, RAM to RAM transfer issue
- From: Somnt <er.somnt@xxxxxxxxx>
- RE: [PATCH] Added sleep support to UART
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH/RFC 1/2] Add Dspbridge driver to OMAP GIT kernel
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- [PATCH/RFC 2/2] Add Dspbridge driver to OMAP GIT kernel
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: SDMA, RAM to RAM transfer issue
- From: "Azbell, Brandon" <b-azbell@xxxxxx>
- [PATCH] ARM: OMAP: armv7a Makefile: change -march flag to "armv7-a" so gcc 4.3.x works
- From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
- [PATCH 4/4] i2c: add MODULE_ALIAS to twl4030 drivers
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 2/4] usb: musb: add MODULE_ALIAS for udev module loading
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 3/4] i2c: allow twl modules to be built as modules
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 1/4] usb: musb: musb on omap3 has 32 endpoints
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 0/4] more musb/i2c patches
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: SDMA, RAM to RAM transfer issue
- From: Somnt <er.somnt@xxxxxxxxx>
- Re: [PATCH] Separate out 3430 LCD panel support from 2430 file
- From: "iqbal" <iqbal@xxxxxx>
- Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH] Separate out 3430 LCD panel support from 2430 file
- From: "Arun KS" <getarunks@xxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- RE: SDMA, RAM to RAM transfer issue
- From: "Azbell, Brandon" <b-azbell@xxxxxx>
- SDMA, RAM to RAM transfer issue
- From: Somnt <er.somnt@xxxxxxxxx>
- JFFS2 Cleanmarker issue
- From: Suresh Rajashekara <suresh@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
- From: "Steve Sakoman" <sakoman@xxxxxxxxx>
- RE: [PATCH] Separate out 3430 LCD panel support from 2430 file
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- RE: [PATCH] Separate out 3430 LCD panel support from 2430 file
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH] Separate out 3430 LCD panel support from 2430 file
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH] Separate out 3430 LCD panel support from 2430 file
- RE: [PATCH] Added sleep support to UART
- From: <Tero.Kristo@xxxxxxxxx>
- [PATCH 1/1] ARM:OMAP: fix driver MODULE_ALIAS()
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Re: [PATCH] Added sleep support to UART
- From: Paul Walmsley <paul@xxxxxxxxx>
- [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
- From: Steve Sakoman <steve@xxxxxxxxxxx>
- [PATCH 2/3] OMAP3 Beagle: add nand support
- From: Steve Sakoman <steve@xxxxxxxxxxx>
- [PATCH 3/3] OMAP3 Beagle: Enable nand and jffs2 support in defconfig
- From: Steve Sakoman <steve@xxxxxxxxxxx>
- Re: [PATCH 0/3] OMAP3 Beagle: Enable nand support
- From: "Steve Sakoman" <sakoman@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP2: Fix build errors in pm24xx.c caused by recent PRM patches
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- query on OMAP3 ISP
- From: Ram <vshrirama@xxxxxxxxx>
- Re: [PATCH 0/3] Adding support for OMAP2EVM(Replacing 2430OSK)
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] i2c: twl4030: warning: mixed declarations and code
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- Re: [PATCH] i2c: twl4030: warning: mixed declarations and code
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH] i2c: twl4030: warning: mixed declarations and code
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- [PATCH 1/3] Renaming files to reflect name change from 2430OSK to OMAP2EVM
- From: "arun c" <arun.edarath@xxxxxxxxx>
- [PATCH] i2c: twl4030: warning: mixed declarations and code
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 0/3] Adding support for OMAP2EVM(Replacing 2430OSK)
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 1/2] usb: musb: MUSB_OTG should depend on PM
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 2/2] usb: musb: ignore disconnect on suspend
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- [PATCH 0/2] musb patches
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
- From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
- [PATCH 3/3] This patch completes the name change from 2430osk to OMAP2EVM
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 2/3] Adding basic compile support for OMAP2EVM
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- [PATCH 0/3] Adding support for OMAP2EVM(Replacing 2430OSK)
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP2: Fix build errors in pm24xx.c caused by recent PRM patches
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: FW: driver DVI output OMAP3 EVM
- From: "Rodrigo Vivi" <rodrigo.vivi@xxxxxxxxx>
- Re: FW: driver DVI output OMAP3 EVM
- From: "Rodrigo Vivi" <rodrigo.vivi@xxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Viraj Karandikar" <viraj.karandikar@xxxxxxxxxx>
- Re: [PATCH] Added sleep support to UART
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: omap osk audio
- From: "Suresh Rajashekara" <srajashekara@xxxxxxxxxx>
- Re: [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP: Add OMAP34xx pin multiplexing into I2C bus registration helper
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [Resend][PATCH] Fix for the i2c initialization error on 2430sdp
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] This patch fixes "scheduling while atomic" bug when driver is unloaded.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 00/02] OMAP3 CPUidle patches
- From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Re: [PATCH] This patch fixes "scheduling while atomic" bug when driver is unloaded.
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH] PRCM: OMAP3: Fix to wrongly modified omap2_clk_wait_ready
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/3] radio-tea5761: Update driver
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- Re: [PATCH 3/3] radio-tea5761: Update driver
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- [PATCH 1/3] tea5761: Add init and sleep callbacks on tea5761 tuner
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 0/3] Updates for tea5761 (take #3)
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 2/3] tea5761 tuner: fix registers utilization
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Viraj Karandikar" <viraj.karandikar@xxxxxxxxxx>
- omap osk audio
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- [PATCH] Added sleep support to UART
- From: Tero Kristo <tero.kristo@xxxxxxxxx>
- RE: [PATCH 1/1] Added sleep support to UART
- From: <Tero.Kristo@xxxxxxxxx>
- RE: full linux history in git
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- RE: doubt about adding entries in mux.c
- From: "Azbell, Brandon" <b-azbell@xxxxxx>
- [PATCH] This patch fixes "scheduling while atomic" bug when driver is unloaded.
- From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
- doubt about adding entries in mux.c
- From: "Arun KS" <getarunks@xxxxxxxxx>
- Re: GUI on omap-osk
- From: Tom Cooksey <thomas.cooksey@xxxxxxxxxxxxx>
- GUI on omap-osk
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- [PATCH 00/02] OMAP3 CPUidle patches
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 02/02] Kconfig changes
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- [PATCH 01/02] OMAP3 CPUidle driver
- From: "Rajendra Nayak" <rnayak@xxxxxx>
- compiling X11 fails at makekeys
- From: "mohammed shareef" <mdshareef@xxxxxxxxx>
- Re: [PATCH 1/1] Added sleep support to UART
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/2] ARM: OMAP: Add OMAP34xx pin multiplexing into I2C bus registration helper
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH 2/2] ARM: OMAP: Add OMAP34xx pin muxing into I2C bus registration helper
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [PATCH 1/1] Added sleep support to UART
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH 3/3] radio-tea5761: Update driver
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- Re: [PATCH 3/3] radio-tea5761: Update driver
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- Re: [PATCH] PRCM: OMAP3: Fix to wrongly modified omap2_clk_wait_ready
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH 3/3] radio-tea5761: Update driver
- From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
- [PATCH 3/3] radio-tea5761: Update driver
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 2/3] tea5761 tuner: fix registers utilization
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 0/3] Updates for tea5761 (take #2)
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- [PATCH 1/3] tea5761: Add init and sleep callbacks on tea5761 tuner
- From: Eduardo Valentin <edubezval@xxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
- Accelerating video playback on OMAP2 & OMAP3
- From: Tom Cooksey <thomas.cooksey@xxxxxxxxxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Pasam, Vijay" <vpasam@xxxxxx>
- RE: Sharing buffers between ARM-DSP on OMAP3430 over Bridge
- From: "Viraj Karandikar" <viraj.karandikar@xxxxxxxxxx>
- Re: OSK5912 Camera Port
- From: "Pablo Recabal" <pablorecabal@xxxxxxxxx>
- OSK5912 Camera Port
- From: Mikhail <dotnetfx@xxxxx>
- [PATCH 1/2] ARM: OMAP2: Add pin multiplexing configuration for OMAP34xx I2C pins
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- [PATCH 2/2] ARM: OMAP: Add OMAP34xx pin muxing into I2C bus registration helper
- From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
- Re: [Resend][PATCH] Fix for the i2c initialization error on 2430sdp
- From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
- [PATCH] PRCM: OMAP3: Fix to wrongly modified omap2_clk_wait_ready
- From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
- DISPC register values to eliminate the omapfb irq errors on 2430SDP
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- [Resend][PATCH] Fix for the i2c initialization error on 2430sdp
- From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] Fix for the i2c initialiation error on 2430sdp
- From: "arun c" <arun.edarath@xxxxxxxxx>
- I2c issues with omap3430
- From: Ram <vshrirama@xxxxxxxxx>
- RE: [PATCH] Fix for the i2c initialiation error on 2430sdp
- From: "Chandra shekhar" <x0044955@xxxxxx>
- [PATCH 16/16] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 15/16] ARM: OMAP2: Add minimal omap3430 support
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 14/16] ARM: OMAP2: Misc updates from linux-omap tree
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 13/16] ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 12/16] ARM: OMAP2: Add pinmux support for omap34xx
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 11/16] ARM: OMAP2: Implement CPUfreq frequency table based on PRCM table
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 10/16] ARM: OMAP2: Use omap_globals for CPU detection for multi-omap
- From: Tony Lindgren <tony@xxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]