Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 08/16] ARM: OMAP2: Remove OMAP_PRM_REGADDR
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/16] ARM: OMAP2: Add clkdm_get_pwrdm()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/16] ARM: OMAP2: Add missing SSI L4 interface clock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/16] ARM: OMAP2: Move sys_clkout2 clk to core_clkdm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/16] ARM: OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/16] ARM: OMAP2: Add non-CORE DPLL rate set code and M,N programming
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/16] ARM: OMAP2: Split sleep.S into sleep242x.S and sleep243x.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/12] Omap2 clock patches for post 2.6.26
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/16] ARM: OMAP2 Provide function to enable/disable uart clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] ARM: OMAP2: Clockdomain: Integrate OMAP3 clocks with clockdomain code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] ARM: OMAP2: Clockdomain: Associate clocks with clockdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/12] ARM: OMAP2: Clockdomain: Encode OMAP2/3 clockdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/12] ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/12] ARM: OMAP2: Clockdomain: Add base OMAP2/3 clockdomain code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/12] ARM: OMAP: Powerdomain: Add OMAP3 powerdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/12] ARM: OMAP2: Powerdomain: Add OMAP2 powerdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/12] ARM: OMAP2: Powerdomain: Add OMAP2/3 common powerdomains
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/12] ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/12] ARM: OMAP2: Clock: New OMAP2/3 DPLL rate rounding algorithm
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/12] ARM: OMAP2: Clock: Add OMAP3 DPLL autoidle functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 21/21] ARM: OMAP: Add OMAP chip type structure; clean up mach-omap2/id.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 20/21] ARM: OMAP: Turn CM and PRM access into functions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 19/21] ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 18/21] ARM: OMAP: Remove __REG access for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 17/21] ARM: OMAP: USB: Change omap USB code to use omap_read/write instead of __REG
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 16/21] ARM: OMAP: Change omap_cf.c and omap_nor.c to use omap_readw/writew instead of __REG
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 15/21] ARM: OMAP: CLKFW: Initial debugfs support for omap clock framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/21] ARM: OMAP: McBSP: Add support for mcbsp on mach-omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/21] ARM: OMAP: Clean up interrupt lines to fix warnings for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/21] ARM: OMAP: McBSP: Add support for mcbsp on mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/21] ARM: OMAP: McBSP: Prepare for splitting into omap1 and omap2 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/21] ARM: OMAP: McBSP: Coding style cleanup on arch/arm/plat-omap/mcbsp.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/21] ARM: OMAP: SRAM: Split sram24xx.S into sram242x.S and sram243x.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/21] ARM: OMAP: SRAM: Move omap2 sram-fn.S to sram242x.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/21] ARM: OMAP: SRAM: Move sram-fn.S from plat-omap to mach-omap1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/21] ARM: OMAP: DMA: Clean-up code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/21] ARM: OMAP: DMA: Remove __REG access
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/21] ARM: OMAP: DMA: Make channels dynamic for multi-boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/21] ARM: OMAP: Add OMAP3430 base defines
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/21] ARM: OMAP: DMTimer: Optimize by adding load and start
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/21] ARM: OMAP: DMTimer: Use posted mode
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• framebuffer and lcd question
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• full linux history in git
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix for the i2c initialiation error on 2430sdp
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix for the i2c initialiation error on 2430sdp
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Fix for the i2c initialiation error on 2430sdp
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: [PATCH] Fix for the i2c initialiation error on 2430sdp
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Fix for the i2c initialiation error on 2430sdp
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: enabling audio on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• enabling audio on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• git server source.mvista.com unavailable this weekend
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• microwindows gives error
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• X11 - makekeys fails with floating point exception
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: Booting 2.6.25 on the OMAP5912OSK
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: Booting 2.6.25 on the OMAP5912OSK
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Booting 2.6.25 on the OMAP5912OSK
  • From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
• nano-x for onap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Qt on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: user space program for omap gpio
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: user space program for omap gpio
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: user space program for omap gpio
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: omap5912-osk bad magic number
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• RE: Any one has ramfs Image for OMAP1510
  • From: "ananth" <ananth@xxxxxxx>
• audio on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• RE: Any one has ramfs Image for OMAP1510
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Any one has ramfs Image for OMAP1510
  • From: "ananth" <ananth@xxxxxxx>
• Re: user space program for omap gpio
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap5912-osk bad magic number
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Second part for the UART hack (dependency)
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/1] omap3_fclks_active() now uses generic serial clock check
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/1] Added sleep support to UART
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: omap5912-osk bad magic number
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• RE: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: "TK, Pratheesh Gangadhar" <pratheesh@xxxxxx>
• [no subject]
  • From: "Ananth M" <mekaananth@xxxxxxxxx>
• Request for the ramdisk_ks.gz file
  • From: "ananth" <ananth@xxxxxxx>
• RE: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• RE: [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [Question] MUSB: why not clear DMA interrupt in musbhsdma.c?
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• Re: omap5912-osk bad magic number
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: user space program for omap gpio
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• omap5912-osk bad magic number
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• user space program for omap gpio
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: [PATCH 1/1] Added sleep support to UART
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: "TK, Pratheesh Gangadhar" <pratheesh@xxxxxx>
• Re: [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• FW: driver DVI output OMAP3 EVM
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: zlib error in x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: zlib error in x-windows on omap osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: zlib error in x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• RE: [PATCH 1/1] Added sleep support to UART
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: OMAP3530 EVM Sources are on linux.omap.com
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• OMAP3530 EVM Sources are on linux.omap.com
  • From: "Prashant K" <prashant.khoje+omap@xxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: Booting 2.6.25 on the OMAP5912OSK
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: Booting 2.6.25 on the OMAP5912OSK
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Booting 2.6.25 on the OMAP5912OSK
  • From: Philip Balister <philip@xxxxxxxxxxxx>
• Re: MMC/SD cards hotplug scenario
  • From: Pierre Ossman <drzeus@xxxxxxxxx>
• Re: zlib error in x-windows on omap osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] OMAP3 Beagle: Enable nand support
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] OMAP3 Beagle: Enable nand and jffs2 support in defconfig
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 2/3] OMAP3 Beagle: add nand support
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 1/3] mtd omap2 nand driver: extend to work with omap3 boards
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 0/3] OMAP3 Beagle: Enable nand support
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: zlib error in x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: 2.6.26-rc3-omap vs N810 and Xomap
  • From: astralstorm@xxxxxxxx
• Re: 2.6.26-rc3-omap vs N810 and Xomap
  • From: astralstorm@xxxxxxxx
• Re: 2.6.26-rc3-omap vs N810 and Xomap
  • From: astralstorm@xxxxxxxx
• Re: zlib error in x-windows on omap osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• zlib error in x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• x-windows on omap osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• [PATCH v2] omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Added sleep support to UART
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] Updates on mcbsp driver (take #4)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/14] Big clean-up for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions.
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: SmartReflex driver, reference source and header files
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 3/3] ARM: OMAP: SmartReflex driver: integration to linux-omap
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 0/3] ARM: OMAP: SmartReflex driver
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH] ARM: OMAP: omap3beagle: add a platform device to hook up the GPIO leds to the leds-gpio driver
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] MACH-OMAP2: MCBSP: Add support for mcbsp on mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] PLAT-OMAP: MCBSP: Transform into platform driver
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 2/5] MACH-OMAP1: MCBSP: Add support for mcbsp on mach-omap1
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 4/5] Fix mcbsp clock definition on clock34xx.h
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 3/5] ARM: OMAP: Fix 24xx mcbsp clocks
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 5/5] MACH-OMAP2: MCBSP: Add support for mcbsp on mach-omap2
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 0/5] Updates on mcbsp driver (take #4)
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• RE: [PATCH 5/5] MACH-OMAP2: MCBSP: Add support for mcbsp on mach-omap2
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 2/5] MACH-OMAP1: MCBSP: Add support for mcbsp on mach-omap1
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• [PATCH 1/5] PLAT-OMAP: MCBSP: Transform into platform driver
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 4/5] Fix mcbsp clock definition on clock34xx.h
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 5/5] MACH-OMAP2: MCBSP: Add support for mcbsp on mach-omap2
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 2/5] MACH-OMAP1: MCBSP: Add support for mcbsp on mach-omap1
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• [PATCH 0/5] Updates on mcbsp driver (take #3)
  • From: Eduardo Valentin <edubezval@xxxxxxxxx>
• Re: [PATCH 1/4] PLAT-OMAP: MCBSP: Tranform into platform driver
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Dynamic idle support for UART
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/1] Added sleep support to UART
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: 2.6.26-rc3-omap vs N810 and Xomap
  • From: Frantisek Dufka <dufkaf@xxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: beagleboard defconfig: increase FB DMA size to 4MB so the 1024x768x24 default fits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: 2.6.26rc4 build error
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: beagleboard defconfig: increase FB DMA size to 4MB so the 1024x768x24 default fits
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file -- RESUBMIT AS CONSOLIDATED PATCH
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file -- RESUBMIT AS CONSOLIDATED PATCH
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file -- RESUBMIT AS CONSOLIDATED PATCH
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 0/2] Add D2D clockdomain on OMAP3 ES2+
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] OMAP2 PM: link clocks to clockdomains, use clkdm/pwrdm code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add SDTI device for OMAP3 and unify address definitions for OMAP1 and OMAP2.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Remove config conditional tcm825x_regs_* declarations
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Add SDTI device for OMAP3 and unify address definitions for OMAP1 and OMAP2.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• Re: 2.6.26rc4 build error
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] Add SDTI device for the OMAP3 and unify addressdefinitions.
  • From: <roman.tereshonkov@xxxxxxxxx>
• Re: 2.6.26rc4 build error
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add SDTI device for the OMAP3 and unify address definitions.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• 2.6.26rc4 build error
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] Add SDTI device for the OMAP3 and unify address definitions.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• [PATCH] Add SDTI device for the OMAP3 boards.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• sdio_writesb doesn't transfer data
  • From: Dmitriy Chumak <dmytro.chumak@xxxxxxxxxxxx>
• Re: [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: 2.6.26-rc3-omap vs N810 and Xomap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/4] OMAP3 Beagle: enable fb in defconfig
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 3/4] OMAP3 Beagle: enable usb in defconfig
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 2/4] OMAP3 Beagle: enable rtc in defconfig
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 1/4] OMAP3 Beagle: enable mmc in defconfig
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 0/4] OMAP3 Beagle: update defconfig to match board file
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 14/14] ARM: OMAP: Use omap_globals for CPU detection for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/14] ARM: OMAP: Change to use CM offsets for clocks for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/14] ARM: OMAP: Remove OMAP_CM_REGADDR for multi-boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/14] ARM: OMAP: Remove OMAP_PRM_REGADDR
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/14] ARM: OMAP: Introduce omap_globals and prcm access functions for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 9/14] ARM: OMAP: Remove omap_sram_patch_va
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 8/14] ARM: OMAP: Split sram24xx.S into sram242x.S and sram243x.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 7/14] ARM: OMAP: Split sleep24xx.S into sleep242x.S and sleep243x.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/14] ARM: OMAP: Remove __REG access for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/14] musb_hdrc: Change __REG access to omap_read/write for multi-boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/14] ARM: OMAP: Change __REG access to omap/read write for traffic controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/14] USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/14] CF: Change omap_cf.c to use omap_readw/writew instead of __REG for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/14] ARM: OMAP: Fix debug-macro for multi_omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/14] Big clean-up for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Misc fixes to this series (CF: Change omap_cf.c to use omap_readw/writew instead of __REG for multi-omap)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "Abraham Arce" <abraham.arce.moreno@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "S.Rajeev" <srajeev@xxxxxxxxxxxxxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Can't build the DSP/BIOS LINK messaging library (OSK 5912, for CCS debugging)
  • From: "Pablo Ravest" <pravest@xxxxxxxxx>
• Re: omap 0sk and mistral touchscreen..
  • From: "Abraham Arce" <abraham.arce.moreno@xxxxxxxxx>
• sdio cmd53 doesn't work on omap 2430sdp
  • From: Dmitriy Chumak <dmytro.chumak@xxxxxxxxxxxx>
• omap 0sk and mistral touchscreen..
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: "nick loeve" <trickie@xxxxxxxxx>
• Re: [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: "nick loeve" <trickie@xxxxxxxxx>
• 2.6.26-rc3-omap vs N810 and Xomap
  • From: Radoslaw Szkodzinski <astralstorm@xxxxxxxx>
• Re: [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: "nick loeve" <trickie@xxxxxxxxx>
• [PATCH] Fix n800 build - Remove kernel config conditional declaration of TSC2005 device config structures
  • From: trickie@xxxxxxxxx
• Re: [PATCH] Remove config conditional tcm825x_regs_* declarations
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Remove config conditional tcm825x_regs_* declarations
  • From: trickie@xxxxxxxxx
• Re: [PATCH] Fix compile on n800 if CONFIG_MACH_NOKIA_N810 is not set
  • From: "nick loeve" <trickie@xxxxxxxxx>
• Re: [PATCH] Fix compile on n800 if CONFIG_MACH_NOKIA_N810 is not set
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Fix compile on n800 if CONFIG_MACH_NOKIA_N810 is not set
  • From: trickie@xxxxxxxxx
• Re: omap osk and mistral touchscreen-ads7846
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Can't build the DSP/BIOS LINK messaging library (OSK 5912, for CCS debugging)
  • From: "Pablo Recabal" <pablorecabal@xxxxxxxxx>
• [PATCH] Driver for omap34xx temperature sensor. second version.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 0/2] Add D2D clockdomain on OMAP3 ES2+
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: MMC/SD cards hotplug scenario
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: MMC/SD cards hotplug scenario
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix compiler error at pm-debug
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: MMC/SD cards hotplug scenario
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Add D2D clockdomain on OMAP3 ES2+
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/2] OMAP3 clockdomains: include D2D clockdomain on 34xx ES2+
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] OMAP3 PM: convert open-coded iterator to use pwrdm_for_each_clkdm()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Steve Poulsen <spoulsen@xxxxxxxxxxxxx>
• RE: MMC/SD cards hotplug scenario
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [PATCH] USB: H4/OHCI/ISP1301 fixes
  • From: Imre Deak <imre.deak@xxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: omap osk and mistral touchscreen-ads7846
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Recent DMA changes broke omap1, CDAC broken on 3430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] usb: musb: MUSB_OTG should depend on PM
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• omap osk and mistral touchscreen-ads7846
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: "Mike Frysinger" <vapier.adi@xxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: sdio cmd53 doesn't work on omap 2430sdp
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: MMC/SD cards hotplug scenario
  • From: Pierre Ossman <drzeus@xxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: enabling uart2 on omap5912 osk
  • From: <roman.tereshonkov@xxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: enabling uart2 on omap5912 osk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: sdio cmd53 doesn't work on omap 2430sdp
  • From: Dmitriy Chumak <dmytro.chumak@xxxxxxxxxxxx>
• RE: sdio cmd53 doesn't work on omap 2430sdp
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• enabling uart2 on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• RE: MMC/SD cards hotplug scenario
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• Re: MMC/SD cards hotplug scenario
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• enabling uart2 on omap5912 osk
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• MMC/SD cards hotplug scenario
  • From: "Madhusudhan Chikkature Rajashekar" <madhu.cr@xxxxxx>
• [PATCH] ARM: OMAP: Fix compiler error at pm-debug
  • From: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
• Re: [PATCH 0/5] RT: Misc. fixups for ARM/OMAP against 2.6.25.4-rt3
  • From: "Luís Vitório Cargnini" <lvcargnini@xxxxxxxxx>
• [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Mundt <lethal@xxxxxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
• [PATCH 5/6] 24xx PM: convert pm24xx.c code to use pwrdm/clkdm interfaces
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/6] DSP Gateway: remove manual clockdomain/powerdomain tweaking
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/6] clockdomain: add clkdm_get_pwrdm()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/6] 24xx clock: associate clocks with clockdomains
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/6] 24xx clock: add missing SSI L4 interface clock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/6] powerdomain: add pwrdm_get_mem_bank_count()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/6] OMAP2 PM: link clocks to clockdomains, use clkdm/pwrdm code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Philip Balister <philip@xxxxxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/4] PLAT-OMAP: MCBSP: Tranform into platform driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
• [PATCH 3/5] RT: ARM: remove __attribute_used__ from semaphore code
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [RFC/PATCH 4/5] RT: ARM: disable duplicate cmpxchg
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 2/5] RT: wrap BUILD_CHECK_IRQ_FLAGS
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 4/5] RT: ARM: disable duplicate cmpxchg
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 1/5] RT: ARM: remove non-existant trace_preempt_*_idle calls from idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 5/5] ARM: OMAP: remove unnecessary locking in clk_get_rate()
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• [PATCH 0/5] RT: Misc. fixups for ARM/OMAP against 2.6.25.4-rt3
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH 0/9] 34XX: PM: Support for retention on suspend and idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Problems with RT pathc s in OMAP kernel
  • From: Kevin Hilman <khilman@xxxxxxxxxx>
• Re: [PATCH] Driver for omap34xx temperature sensor.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• omap 5912 and mistral touchscreen
  • From: "mohammed shareef" <mdshareef@xxxxxxxxx>
• omap16xxcam module
  • From: Михаил <dotnetfx@xxxxx>
• Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH] IRQ: simplify OMAP2 mask_irq/unmask_irq code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Problems with RT pathc s in OMAP kernel
  • From: "Luís Vitório Cargnini" <lvcargnini@xxxxxxxxx>
• RE: Power management behavior of linux-2.6.14-omap2-v5
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• RE: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: "Chandra shekhar" <x0044955@xxxxxx>
• Re: [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: Power management behavior of linux-2.6.14-omap2-v5
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] MUSB: Real fix bug 4 usb bugs found on Blackfin
  • From: "Mike Frysinger" <vapier.adi@xxxxxxxxx>
• RE: [PATCH 2/2] MUSB: Real fix bug 4 usb bugs found on Blackfin
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: "Eduardo Valentin" <edubezval@xxxxxxxxx>
• Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] Driver for omap34xx temperature sensor.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• RE: Power management behavior of linux-2.6.14-omap2-v5
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAPLDP
  • From: "Kamat, Nishant" <nskamat@xxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• Re: [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Power management behavior of linux-2.6.14-omap2-v5
  • From: "arun c" <arunedarath@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• Re: [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 2/2] MUSB: Real fix bug 4 usb bugs found on Blackfin
  • From: Bryan Wu <cooloney@xxxxxxxxxx>
• [PATCH 1/2] MUSB: fix bug - since 2.6.24 urb API changed, giveback function return wrong status
  • From: Bryan Wu <cooloney@xxxxxxxxxx>
• [PATCH 0/2] MUSB: 2 patches to fix some bug found on Blackfin
  • From: Bryan Wu <cooloney@xxxxxxxxxx>
• Re: [PATCH 2/5] USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] CF: Change omap_cf.c to use omap_readw/writew instead of __REG for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/5] CF: Change omap_cf.c to use omap_readw/writew instead of __REG for multi-omap
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 5/5] ARM: OMAP: Remove __REG access for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] musb_hdrc: Change __REG access to omap_read/write for multi-boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] ARM: OMAP: Change __REG access to omap/read write for traffic controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] USB: Change omap USB code to use omap_read/write instead of __REG for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] CF: Change omap_cf.c to use omap_readw/writew instead of __REG for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] Remove __REG macro access for multi-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Performance enhancement for MMCSD when feature CONFIG_MMC_BLOCK_BOUNCE is enabled in the MMC core
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: This patch adds the driver to turn on the TFP410 framer to get DVI output working on the beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] clock34xx.c: fix spinlock reentry in omap3_noncore_dpll_enable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Chip message format is either 8-bit cmd or 8-bit cmd + 16-bit data.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] I2C: TSL2563, LP5521, TEA5761: Refer to id_table in i2c_driver structures
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] N800: Select tcm825x only if wanted
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] TCM825x: Include invertation of image mirroring in configuration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 3/5] USB: MUSB: Do not turn vbus on immediately
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/3] DMA clean-up for multi-boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] Updates on mcbsp driver (take #2)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: board-omap3beagle: fix merge-damage in RTC code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] 34XX: PM: Workaround to reset all wkdeps
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 04/10] PRCM: Workaround for pwrdn_x control
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 10/10] 34XX: PM: Workaround to mask uart clocks when checking active clocks
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 07/10] 34XX: PM: Workaround to check wether any fck is active before entering sleep
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 09/10] 34XX: PM: Workaround for non-existing usb clockdomain
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 05/10] 34XX: PM: Workaround to enable autoidle for clocks and plls
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 08/10] 34XX: PM: Workaround to disable mmc
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 03/10] 34XX: PM: Workaround for missing smartreflex driver
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 01/10] 34XX: PM: Workaround for taking care of gpio clocks
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 02/10] 34XX: PM: Workaround for uart clocks
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• 34XX: PM: Workarounds to get omap3 to retention
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH 8/9] 34XX: PM: Initial version of suspend and dynamic retention
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 9/9] OMAP3430SDP: Enable config options CONFIG_OMAP_RESET_CLOCKS and CONFIG_SUSPEND
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 7/9] 34XX: Add miscellaneous definitions related to 34xx
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 5/9] 34XX: Suspend: Take suspend sram code from ti cdp kernel
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 3/9] PM: Add pm.c file for omap2 and omap3 common code
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 6/9] 34XX: Suspend: Use same naming convention in sleep34xx.S as in sleep24XX.S
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 2/9] 24XX: PM: Move debugging related code to pm-debug.c
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 4/9] OMAP: Add new function to check wether there is irq pending
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 1/9] 24XX: PM: Move pm.c to pm24xx.c and sleep.S to sleep24xx.S
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 0/9] 34XX: PM: Support for retention on suspend and idle
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH] ARM: OMAP: This patch adds the driver to turn on the TFP410 framer to get DVI output working on the beagleboard
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] This patch adds the driver to turn on the TFP410 framer to get DVI output working on the beagleboard
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] This patch adds the driver to turn on the TFP410 framer to get DVI output working on the beagleboard
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• [PATCH] This patch adds the driver to turn on the TFP410 framer to get DVI output working on the beagleboard
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: This patch fixes the merge-damage in the beagleboard RTC code
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
• Re: [PATCH] omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [PATCH] omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• RE: [PATCH] Performance enhancement for MMCSD when feature CONFIG_MMC_BLOCK_BOUNCE is enabled in the MMC core
  • From: "Kumar, Purushotam" <purushotam@xxxxxx>
• Re: ALSA SoC for TWL4030
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: wear-leveling necessary on N810 internal/removable cards?
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [PATCH] Performance enhancement for MMCSD when feature CONFIG_MMC_BLOCK_BOUNCE is enabled in the MMC core
  • From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
• Re: wear-leveling necessary on N810 internal/removable cards?
  • From: "Kyungmin Park" <kmpark@xxxxxxxxxxxxx>
• wear-leveling necessary on N810 internal/removable cards?
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches (success)
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [PATCH 1/2] Input: Fix lm8323 probe and module unloading, take #2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] CBUS: Make retu watchdog behave like a standard Linux watchdog
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Add sram34xx.S
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] clock34xx.c: fix spinlock reentry in omap3_noncore_dpll_enable()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [PATCH 0/2] Make N810 keyboard work with console, take #2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Input: Fix lm8323 probe and module unloading, take #2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Query ISP1301 with OMAP
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP3530 EVM Sources are on linux.omap.com
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] Make N810 keyboard work with console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [PATCH] mach-omap2/powerdomain.c: convert rwsem to rwlock
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Chip message format is either 8-bit cmd or 8-bit cmd + 16-bit data.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• Re: ALSA SoC for TWL4030
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: OMAP3530 EVM Sources are on linux.omap.com
  • From: "Remith Ravi" <remith@xxxxxxxxxxxxxxxxxxxx>
• ALSA SoC for TWL4030
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• N810: linux-2.6.26-rc2-omap1 with muru.com N810 patches
  • From: green <greenfreedom10@xxxxxxxxx>
• RE: [RESENDING PATCH 0/4] Support for omap3430 LDP (zoom)
  • From: "Kamat, Nishant" <nskamat@xxxxxx>
• [RESENDING PATCH 3/4] ARM: OMAP: Add default kernel config for OMAP LDP
  • From: Nishant Kamat <nskamat@xxxxxx>
• [RESENDING PATCH 4/4] ARM: OMAP: Add ethernet support for OMAP LDP
  • From: Nishant Kamat <nskamat@xxxxxx>
• [RESENDING PATCH 2/4] ARM: OMAP: Add basic board support for OMAP LDP.
  • From: Nishant Kamat <nskamat@xxxxxx>
• [RESENDING PATCH 1/4] ARM: OMAP: Add register defines for TWL4030 vaux1
  • From: Nishant Kamat <nskamat@xxxxxx>
• Re: [RESENDING PATCH 0/4] Support for omap3430 LDP (zoom)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] ARM: OMAP: Add default kernel config for OMAP LDP
  • From: Nishant Kamat <nskamat@xxxxxx>
• [PATCH] ARM: OMAP: Add ethernet support for OMAP LDP
  • From: Nishant Kamat <nskamat@xxxxxx>
• [PATCH] ARM: OMAP: Add basic board support for OMAP LDP.
  • From: Nishant Kamat <nskamat@xxxxxx>
• [PATCH] ARM: OMAP: Add register defines for TWL4030 vaux1
  • From: Nishant Kamat <nskamat@xxxxxx>
• [RESENDING PATCH 0/4] Support for omap3430 LDP (zoom)
  • From: Nishant Kamat <nskamat@xxxxxx>
• Re: [PATCH] I2C: TSL2563, LP5521, TEA5761: Refer to id_table in i2c_driver structures
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] I2C: TSL2563, LP5521, TEA5761: Refer to id_table in i2c_driver structures
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] Performance enhancement for MMCSD when feature CONFIG_MMC_BLOCK_BOUNCE is enabled in the MMC core
  • From: "Felipe Balbi" <felipebalbi@xxxxxxxxxxxxxxxxxxxxx>
• RE: Query ISP1301 with OMAP
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Query ISP1301 with OMAP
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 0/2] Make N810 keyboard work with console
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• Re: [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Input: Fix lm8323 probe and module unloading
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] ARCH: OMAP: MUSB: Do not block sleep
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: board-omap3beagle: fix merge-damage in RTC code
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
• [PATCH] omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: "andrzej zaborowski" <balrogg@xxxxxxxxx>
• Re: [Resend] [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] Input: Make lm8323 sticky key to work with console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] Input: Fix lm8323 probe and module unloading
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Make N810 keyboard work with console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Android on OMAP
  • From: barban@xxxxxxxxxxxxxxxxxxxxxxxxx
• Re: [PATCH] ARCH: OMAP: MUSB: Do not block sleep
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v3] ARM: OMAP3: Check for L2 cache enabled
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3 EVM: Fix pixel_clock picoseconds/kHz error
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [Resend] [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] ARCH: OMAP: MUSB: Do not block sleep
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [Resend] [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] i2c drivers fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mach-omap2/powerdomain.c: convert rwsem to rwlock
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] I2C: TWL4030: Give a name to twl4030 irq_chip
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mach-omap2/powerdomain.c: convert rwsem to rwlock
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] MMC: Fix omap compile by replacing dev_name with dma_dev_name
  • From: Pierre Ossman <drzeus-list@xxxxxxxxx>
• [PATCH] mach-omap2/powerdomain.c: convert rwsem to rwlock
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] TCM825x: Include invertation of image mirroring in configuration
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH 2/3] N810: Don't export camera orientation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH 3/3] N800: Select tcm825x only if wanted
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: TWL4030 keypad timeout interrupt
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: TWL4030 keypad timeout interrupt
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: TWL4030 keypad timeout interrupt
  • From: "Girish" <girishsg@xxxxxx>
• Re: TWL4030 keypad timeout interrupt
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: TWL4030 keypad timeout interrupt
  • From: "Girish" <girishsg@xxxxxx>
• Re: [PATCH 2/3] N810: Don't export camera orientation
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] TCM825x: Include invertation of image mirroring in configuration
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: Recent OMAP git broken on Beagle
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: Recent OMAP git broken on Beagle
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH 1/3] TCM825x: Include invertation of image mirroring in configuration
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH 3/3] N800: Select tcm825x only if wanted
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH 2/3] N810: Don't export camera orientation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: TWL4030 keypad timeout interrupt
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] I2C: TWL4030: Give a name to twl4030 irq_chip
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• TWL4030 keypad timeout interrupt
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 3/5] USB: MUSB: Do not turn vbus on immediately
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 2/5] USB: MUSB: Change srp sysfs entry to session
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 1/5] USB: MUSB: Switch to a_idle when micro/mini-a cable is attached
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 0/5] musb changes
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 5/5] USB: MUSB: We already know the default timeout
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [RFC PATCH 4/5] USB: MUSB: Always allow musb to idle
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 4/4] I2C: Get rid of warnings
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 3/4] I2C: RADIO: TEA5761: Add i2c_device_id
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 1/4] I2C: TSL2563: Add i2c_device_id
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/4] I2C: LP5521: Add i2c_device_id
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 0/4] i2c drivers fixes
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [Resend] [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: Error displaying commit 4ca958bea8c1d6 in gitweb
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• [PATCH 1/1] OMAP3 EVM: Fix pixel_clock picoseconds/kHz error
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 3/3] CBUS: Make retu watchdog behave like a standard Linux watchdog
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] CBUS: Make retu watchdog behave like a standard Linux watchdog
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• [PATCH 3/3] CBUS: Make retu watchdog behave like a standard Linux watchdog
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/3] CBUS: Checkpatch.pl fixes for retu-wdt.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] CBUS: Fix retu mutex handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/3] Retu watchdog clean-up and fix to make it behave
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: OMAP3 DSPBridge review
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: Recent OMAP git broken on Beagle
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Error displaying commit 4ca958bea8c1d6 in gitweb
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Error displaying commit 4ca958bea8c1d6 in gitweb
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: Android on N810 File System Problem
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• OMAP3530 EVM Sources are on linux.omap.com
  • From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
• Re: [PATCH v3] ARM: OMAP3: Check for L2 cache enabled
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH v3] ARM: OMAP3: Check for L2 cache enabled
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP3: Check for L2 cache enabled
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: Recent OMAP git broken on Beagle
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH v2] ARM: OMAP3: Check for L2 cache enabled
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Git pull request for omap-fixes ([PATCH 0/11] Omap fixes for 2.6.26-rc1)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Recent OMAP git broken on Beagle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: OMAP3 DSPBridge review
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: public git l2 cache off.
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP3: Check for L2 cache enabled
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Recent OMAP git broken on Beagle
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH] OMAP: EHCI: Support new USB expansion board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC/PATCH 0/3] OMAP3 EVM: enable ethernet support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: pending patch
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: add RTC support to beagleboard
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP3 clock: two small fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH try #2] powerdomain: convert pwrdm_mutex to rwsem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] powerdomain: convert pwrdm_mutex to rwsem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/5] sparse, checkpatch cleanup in mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: omap3beagle: add driver to turn on the TFP410 framer to get DVI output
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [beagleboard] Re: TWL4030 intermittent freakout on boot
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH 6/7] OMAP3 EVM: add lcd support (resubmit to respond to feedback)
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 1/11] ARM: OMAP: Update MMC header to fix compile
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/7] OMAP3 EVM: add lcd support (resubmit to respond to feedback)
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>