Enabling L2 cache of Cortex-A8 based OMAP3 has to be done by
bootloader. Check if this is done and warn if not.
Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxx>
----
Changes in v3: Remove braces. Thanks to Felipe for review!
Index: linux-beagle/arch/arm/mach-omap2/id.c
===================================================================
--- linux-beagle.orig/arch/arm/mach-omap2/id.c
+++ linux-beagle/arch/arm/mach-omap2/id.c
@@ -267,3 +267,25 @@ void __init omap2_check_revision(void)
}
+#ifdef CONFIG_ARCH_OMAP3
+/*
+ * OMAP3 has L2 cache which has to be enabled by bootloader.
+ */
+static int __init omap3_check_l2cache(void)
+{
+ u32 val;
+
+ /* Get CP15 AUX register, bit 1 enabled indicates L2 cache is on */
+ asm volatile("mrc p15, 0, %0, c1, c0, 1":"=r" (val));
+
+ if ((val & 0x2) == 0)
+ printk(KERN_WARNING "Warning: L2 cache not enabled. Check "
+ "your bootloader. L2 off results in performance loss\n");
+ else
+ pr_info("OMAP3 L2 cache enabled\n");
+
+ return 0;
+}
+
+arch_initcall(omap3_check_l2cache);
+#endif /* CONFIG_ARCH_OMAP3 */
