* Högander Jouni <jouni.hogander@xxxxxxxxx> [080516 03:54]: > This patch set adds suspend and pm idle support for omap3. There are > still lots of missing stuff so omap doesn't enter full retention > without workaround patches. Workaround patches are sent in separate > set. > > You can try these by applying this set and workaround set. Then boot > the device and do "echo mem > /sys/power/state". Dynamic retention can > be tried by "echo 1 > /sys/power/sleep_while_idle". There is one > pending patch by Felipe Balbi (ARCH: OMAP: MUSB: Do not block sleep) > addition to this and workaround set which is needed dynamic idle to > work. Enabling dynamic idle has nasty side effect that serial console > stops to work. This happens only if you enable it by "echo 1 > > /sys/power/sleep_while_idle" > > I have tested these patches on TI 3430 SDP ES2.0 board. Pushing this series today. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
