Dear All, i cross-compiled the tslib for my filesystem as mentioned in: http://linux.omap.com/pipermail/linux-omap-open-source/2005-March/003174.html and i have put the executables in the filesystem. when i do /usr/X11/bin/ts_calibrate i dont get any "calibration request" on the LCD. But when i do: cat /dev/input/event1 i could see that i get stuff on my host computer when i touch the screen. which means that my toucscreen is associated with event1. i have even set up the proper environment variables. doing: cat /proc/interrupts also shows that spi interrupts incrementing on touching the screen. cat /proc/bus/input/devices I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="ADS784x Touchscreen" P: Phys=spi2.0/input0 S: Sysfs=/class/input/input1 H: Handlers=mouse0 event1 ts0 B: EV=b B: KEY=400 0 0 0 0 0 0 0 0 0 0 B: ABS=1000003 but running ts_calibrate doesnt show any cross-hairs on the LCD. could you tell me if am missing something? thank you, warm regards, Shareef -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
