Hi ,
Make the following change :
1) In the "ts.conf" file make sure "module_raw input" is uncommented .
2) export TSLIB_CONSOLEDEVICE=none
Thanks and Regards
rajeev
----- Original Message -----
From: "mohammed shareef" <mdshareef@xxxxxxxxx>
To: "Abraham Arce" <abraham.arce.moreno@xxxxxxxxx>
Cc: "omap" <linux-omap@xxxxxxxxxxxxxxx>
Sent: Tuesday, May 27, 2008 9:56 AM
Subject: Re: omap 0sk and mistral touchscreen..
Dear Abraham,
I am not receiving any error nor any messages on the LCD.. i have
added the following environment variables:
export TSLIB_TSDEVICE=/dev/input/event1
export TSLIB_CONFFILE=/etc/ts.conf
export TSLIB_CONSOLEDEVICE=/dev/ttyS0
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_PLUGINDIR=/usr/lib/ts
export TSLIB_CALIBFILE=/etc/pointercal
everything seems fine.. except that i dont get any calibration
messages on the lcd.
regards,
Shareef
On Mon, May 26, 2008 at 9:12 PM, Abraham Arce
<abraham.arce.moreno@xxxxxxxxx> wrote:
On 5/26/08, mohammed shareef <mdshareef@xxxxxxxxx> wrote:
Dear All,
i cross-compiled the tslib for my filesystem as mentioned in:
http://linux.omap.com/pipermail/linux-omap-open-source/2005-March/003174.html
and i have put the executables in the filesystem.
when i do
/usr/X11/bin/ts_calibrate
i dont get any "calibration request" on the LCD.
when you run ts_calibrate what are the messages you are getting?
are you receiving the following?
Couldnt load module input
if so, add a third exported variable:
export TSLIB_PLUGINDIR=/lib/ts
But when i do:
cat /dev/input/event1
i could see that i get stuff on my host computer when i touch the
screen. which means that my toucscreen is associated with event1. i
have even set up the proper environment variables.
doing:
cat /proc/interrupts
also shows that spi interrupts incrementing on touching the screen.
cat /proc/bus/input/devices
I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="ADS784x Touchscreen"
P: Phys=spi2.0/input0
S: Sysfs=/class/input/input1
H: Handlers=mouse0 event1 ts0
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=1000003
but running
ts_calibrate doesnt show any cross-hairs on the LCD.
could you tell me if am missing something?
thank you,
warm regards,
Shareef
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please do not print this email unless it is absolutely necessary. Spread environmental awareness.
-------------------------------------------------------DISCLAIMER------------------------------------------------------
The information transmitted herewith is confidential and proprietary information intended only for use by the individual or entity to which it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any review, retransmission, dissemination, distribution, copying or other use of, or taking of any action in reliance upon this information is strictly prohibited. If you have received this communication in error, please contact the sender and delete the material from your computer.
--------------------------------------------------------------------------------------------------------------------------------
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
