[PATCH 2/3] ARM: OMAP: SmartReflex driver: added required register and bit definitions.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Added new register and bit definitions to enable Smartreflex driver integration.
Also PRM_VC_SMPS_SA bit definitions' naming was changed to match the naming of
other similar bit definitions.

Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
---
 arch/arm/mach-omap2/prm-regbits-34xx.h |   27 ++++++--
 arch/arm/mach-omap2/smartreflex.h      |  124 ++++++++++++++++++++++++++++++-
 include/asm-arm/arch-omap/control.h    |   19 +++++
 include/asm-arm/arch-omap/omap34xx.h   |    2 +
 4 files changed, 163 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index c6a7940..f82b5a7 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -435,10 +435,10 @@
 /* PM_PWSTST_EMU specific bits */
 
 /* PRM_VC_SMPS_SA */
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT		16
-#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK		(0x7f << 16)
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT		0
-#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK		(0x7f << 0)
+#define OMAP3430_SMPS_SA1_SHIFT				16
+#define OMAP3430_SMPS_SA1_MASK				(0x7f << 16)
+#define OMAP3430_SMPS_SA0_SHIFT				0
+#define OMAP3430_SMPS_SA0_MASK				(0x7f << 0)
 
 /* PRM_VC_SMPS_VOL_RA */
 #define OMAP3430_VOLRA1_SHIFT				16
@@ -452,7 +452,7 @@
 #define OMAP3430_CMDRA0_SHIFT				0
 #define OMAP3430_CMDRA0_MASK				(0xff << 0)
 
-/* PRM_VC_CMD_VAL_0 specific bits */
+/* PRM_VC_CMD_VAL */
 #define OMAP3430_VC_CMD_ON_SHIFT			24
 #define OMAP3430_VC_CMD_ON_MASK				(0xFF << 24)
 #define OMAP3430_VC_CMD_ONLP_SHIFT			16
@@ -462,7 +462,17 @@
 #define OMAP3430_VC_CMD_OFF_SHIFT			0
 #define OMAP3430_VC_CMD_OFF_MASK			(0xFF << 0)
 
+/* PRM_VC_CMD_VAL_0 specific bits */
+#define OMAP3430_VC_CMD_VAL0_ON				(0x3 << 4)
+#define OMAP3430_VC_CMD_VAL0_ONLP			(0x3 << 3)
+#define OMAP3430_VC_CMD_VAL0_RET			(0x3 << 3)
+#define OMAP3430_VC_CMD_VAL0_OFF			(0x3 << 3)
+
 /* PRM_VC_CMD_VAL_1 specific bits */
+#define OMAP3430_VC_CMD_VAL1_ON				(0xB << 2)
+#define OMAP3430_VC_CMD_VAL1_ONLP			(0x3 << 3)
+#define OMAP3430_VC_CMD_VAL1_RET			(0x3 << 3)
+#define OMAP3430_VC_CMD_VAL1_OFF			(0x3 << 3)
 
 /* PRM_VC_CH_CONF */
 #define OMAP3430_CMD1					(1 << 20)
@@ -521,6 +531,13 @@
 #define OMAP3430_AUTO_RET				(1 << 1)
 #define OMAP3430_AUTO_SLEEP				(1 << 0)
 
+/* Constants to define setup durations */
+#define OMAP3430_CLKSETUP_DURATION			0xff
+#define OMAP3430_VOLTSETUP_TIME2			0xfff
+#define OMAP3430_VOLTSETUP_TIME1			0xfff
+#define OMAP3430_VOLTOFFSET_DURATION			0xff
+#define OMAP3430_VOLTSETUP2_DURATION			0xff
+
 /* PRM_SRAM_PCHARGE */
 #define OMAP3430_PCHARGE_TIME_SHIFT			0
 #define OMAP3430_PCHARGE_TIME_MASK			(0xff << 0)
diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h
index 62907ef..2091a15 100644
--- a/arch/arm/mach-omap2/smartreflex.h
+++ b/arch/arm/mach-omap2/smartreflex.h
@@ -1,5 +1,10 @@
+#ifndef __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
+#define __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H
 /*
- * linux/arch/arm/mach-omap3/smartreflex.h
+ * linux/arch/arm/mach-omap2/smartreflex.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Kalle Jokiniemi
  *
  * Copyright (C) 2007 Texas Instruments, Inc.
  * Lesly A M <x0080970@xxxxxx>
@@ -9,6 +14,21 @@
  * published by the Free Software Foundation.
  */
 
+#define PHY_TO_OFF_PM_MASTER(p)		(p - 0x36)
+#define PHY_TO_OFF_PM_RECIEVER(p)	(p - 0x5b)
+#define PHY_TO_OFF_PM_INT(p)		(p - 0x2e)
+
+/* SMART REFLEX REG ADDRESS OFFSET */
+#define SRCONFIG	0x00
+#define SRSTATUS	0x04
+#define SENVAL		0x08
+#define SENMIN		0x0C
+#define SENMAX		0x10
+#define SENAVG		0x14
+#define AVGWEIGHT	0x18
+#define NVALUERECIPROCAL	0x1C
+#define SENERROR	0x20
+#define ERRCONFIG	0x24
 
 /* SR Modules */
 #define SR1		1
@@ -127,10 +147,106 @@
 #define SR2_ERRMAXLIMIT			(0x02 << 8)
 #define SR2_ERRMINLIMIT			(0xF9 << 0)
 
+/* T2 SMART REFLEX */
+#define R_SRI2C_SLAVE_ADDR		0x12
+#define R_VDD1_SR_CONTROL		0x00
+#define R_VDD2_SR_CONTROL		0x01
+#define T2_SMPS_UPDATE_DELAY		360	/* In uSec */
+
+/* Vmode control */
+#define R_DCDC_GLOBAL_CFG	PHY_TO_OFF_PM_RECIEVER(0x61)
+
+#define R_VDD1_VSEL		PHY_TO_OFF_PM_RECIEVER(0xb9)
+#define R_VDD1_VMODE_CFG	PHY_TO_OFF_PM_RECIEVER(0xba)
+#define R_VDD1_VFLOOR		PHY_TO_OFF_PM_RECIEVER(0xbb)
+#define R_VDD1_VROOF		PHY_TO_OFF_PM_RECIEVER(0xbc)
+#define R_VDD1_STEP		PHY_TO_OFF_PM_RECIEVER(0xbd)
+
+#define R_VDD2_VSEL		PHY_TO_OFF_PM_RECIEVER(0xc7)
+#define R_VDD2_VMODE_CFG	PHY_TO_OFF_PM_RECIEVER(0xc8)
+#define R_VDD2_VFLOOR		PHY_TO_OFF_PM_RECIEVER(0xc9)
+#define R_VDD2_VROOF		PHY_TO_OFF_PM_RECIEVER(0xca)
+#define R_VDD2_STEP		PHY_TO_OFF_PM_RECIEVER(0xcb)
+
+/* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE valuws */
+#define DCDC_GLOBAL_CFG_ENABLE_SRFLX	0x08
+
+/* VDDs*/
+#define PRCM_VDD1	1
+#define PRCM_VDD2	2
+#define PRCM_MAX_SYSC_REGS 30
+
+/* XXX: These should be removed/moved from here once we have a working DVFS
+   implementation in place */
+#define AT_3430		1	/*3430 ES 1.0 */
+#define AT_3430_ES2	2	/*3430 ES 2.0 */
+
+#define ID_OPP			0xE2 	/*OPP*/
+
+/* DEVICE ID/DPLL ID/CLOCK ID: bits 28-31 for OMAP type */
+#define OMAP_TYPE_SHIFT		28
+#define OMAP_TYPE_MASK		0xF
+/* OPP ID: bits: 0-4 for OPP number */
+#define OPP_NO_POS		0
+#define OPP_NO_MASK		0x1F
+/* OPP ID: bits: 5-6 for VDD */
+#define VDD_NO_POS		5
+#define VDD_NO_MASK		0x3
+/* Other IDs: bits 20-27 for ID type */
+/* These IDs have bits 25,26,27 as 1 */
+#define OTHER_ID_TYPE_SHIFT		20
+#define OTHER_ID_TYPE_MASK		0xFF
+
+#define OTHER_ID_TYPE(X) ((X & OTHER_ID_TYPE_MASK) << OTHER_ID_TYPE_SHIFT)
+#define ID_OPP_NO(X)	 ((X & OPP_NO_MASK) << OPP_NO_POS)
+#define ID_VDD(X)	 ((X & VDD_NO_MASK) << VDD_NO_POS)
+#define OMAP(X)		 ((X >> OMAP_TYPE_SHIFT) & OMAP_TYPE_MASK)
+#define get_opp_no(X)	 ((X >> OPP_NO_POS) & OPP_NO_MASK)
+#define get_vdd(X)	 ((X >> VDD_NO_POS) & VDD_NO_MASK)
+
+/* VDD1 OPPs */
+#define PRCM_VDD1_OPP1		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x1))
+#define PRCM_VDD1_OPP2		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x2))
+#define PRCM_VDD1_OPP3		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x3))
+#define PRCM_VDD1_OPP4		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x4))
+#define PRCM_VDD1_OPP5		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x5))
+#define PRCM_NO_VDD1_OPPS	5
+
+
+/* VDD2 OPPs */
+#define PRCM_VDD2_OPP1		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x1))
+#define PRCM_VDD2_OPP2		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x2))
+#define PRCM_VDD2_OPP3		(OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \
+					ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x3))
+#define PRCM_NO_VDD2_OPPS	3
+/* XXX: end remove/move */
+
+
+/* XXX: find more appropriate place for these once DVFS is in place */
 extern u32 current_vdd1_opp;
 extern u32 current_vdd2_opp;
-extern struct kset power_subsys;
 
-extern inline int loop_wait(u32 *lcnt, u32 *rcnt, u32 delay);
-extern void omap_udelay(u32 udelay);
+/*
+ * Smartreflex module enable/disable interface.
+ * NOTE: if smartreflex is not enabled from sysfs, these functions will not
+ * do anything.
+ */
+#if defined(CONFIG_ARCH_OMAP34XX) && defined(CONFIG_TWL4030_CORE)
+void enable_smartreflex(int srid);
+void disable_smartreflex(int srid);
+#else
+static inline void enable_smartreflex(int srid) {}
+static inline void disable_smartreflex(int srid) {}
+#endif
+
+
+#endif
+
 
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 12bc22a..6e64fe7 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -138,6 +138,15 @@
 #define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
 #define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD1	(OMAP2_CONTROL_GENERAL + 0x0110)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD1	(OMAP2_CONTROL_GENERAL + 0x0114)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD1	(OMAP2_CONTROL_GENERAL + 0x0118)
+#define OMAP343X_CONTROL_FUSE_OPP4_VDD1	(OMAP2_CONTROL_GENERAL + 0x011c)
+#define OMAP343X_CONTROL_FUSE_OPP5_VDD1	(OMAP2_CONTROL_GENERAL + 0x0120)
+#define OMAP343X_CONTROL_FUSE_OPP1_VDD2	(OMAP2_CONTROL_GENERAL + 0x0124)
+#define OMAP343X_CONTROL_FUSE_OPP2_VDD2	(OMAP2_CONTROL_GENERAL + 0x0128)
+#define OMAP343X_CONTROL_FUSE_OPP3_VDD2	(OMAP2_CONTROL_GENERAL + 0x012c)
+#define OMAP343X_CONTROL_FUSE_SR	(OMAP2_CONTROL_GENERAL + 0x0130)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
 #define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
@@ -172,6 +181,16 @@
 #define OMAP2_SYSBOOT_1_MASK		(1 << 1)
 #define OMAP2_SYSBOOT_0_MASK		(1 << 0)
 
+/* CONTROL_FUSE_SR bits */
+#define OMAP343X_SR2_SENNENABLE_MASK	(0x3 << 10)
+#define OMAP343X_SR2_SENNENABLE_SHIFT	10
+#define OMAP343X_SR2_SENPENABLE_MASK	(0x3 << 8)
+#define OMAP343X_SR2_SENPENABLE_SHIFT	8
+#define OMAP343X_SR1_SENNENABLE_MASK	(0x3 << 2)
+#define OMAP343X_SR1_SENNENABLE_SHIFT	2
+#define OMAP343X_SR1_SENPENABLE_MASK	(0x3 << 0)
+#define OMAP343X_SR1_SENPENABLE_SHIFT	0
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 extern void __iomem *omap_ctrl_base_get(void);
diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h
index 6a0459a..3667fd6 100644
--- a/include/asm-arm/arch-omap/omap34xx.h
+++ b/include/asm-arm/arch-omap/omap34xx.h
@@ -54,6 +54,8 @@
 #define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
 #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
 #define IRQ_SIR_IRQ		0x0040
+#define OMAP34XX_SR1_BASE	0x480C9000
+#define OMAP34XX_SR2_BASE	0x480CB000
 
 
 #if defined(CONFIG_ARCH_OMAP3430)
-- 
1.5.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux