From: Paul Walmsley <paul@xxxxxxxxx>
Add non-CORE DPLL rate set code and M,N programming for OMAP3.
Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework.
You may see some warnings on rate sets from the freqsel code. The
table that TI presented in the 3430 TRM Rev F does not cover Fint <
750000, which definitely occurs in practice. However, the lack of this
freqsel case does not appear to impair the DPLL rate change.
Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 93cb52c..408b51a 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -104,6 +104,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
return ret;
}
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+ unsigned long fint;
+ u16 f = 0;
+
+ fint = clk->parent->rate / (n + 1);
+
+ pr_debug("clock: fint is %lu\n", fint);
+
+ if (fint >= 750000 && fint <= 1000000)
+ f = 0x3;
+ else if (fint > 1000000 && fint <= 1250000)
+ f = 0x4;
+ else if (fint > 1250000 && fint <= 1500000)
+ f = 0x5;
+ else if (fint > 1500000 && fint <= 1750000)
+ f = 0x6;
+ else if (fint > 1750000 && fint <= 2100000)
+ f = 0x7;
+ else if (fint > 7500000 && fint <= 10000000)
+ f = 0xB;
+ else if (fint > 10000000 && fint <= 12500000)
+ f = 0xC;
+ else if (fint > 12500000 && fint <= 15000000)
+ f = 0xD;
+ else if (fint > 15000000 && fint <= 17500000)
+ f = 0xE;
+ else if (fint > 17500000 && fint <= 21000000)
+ f = 0xF;
+ else
+ pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+ return f;
+}
+
/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
/*
@@ -240,7 +276,7 @@ static int omap3_noncore_dpll_enable(struct clk *clk)
if (clk == &dpll3_ck)
return -EINVAL;
- if (clk->parent->rate == clk_get_rate(clk))
+ if (clk->parent->rate == omap2_get_dpll_rate(clk))
r = _omap3_noncore_dpll_bypass(clk);
else
r = _omap3_noncore_dpll_lock(clk);
@@ -270,6 +306,109 @@ static void omap3_noncore_dpll_disable(struct clk *clk)
_omap3_noncore_dpll_stop(clk);
}
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock.. Returns -EINVAL upon error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+ struct dpll_data *dd;
+ u32 v;
+
+ if (!clk)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ /*
+ * According to the 12-5 CDP code from TI, "Limitation 2.5"
+ * on 3430ES1 prevents us from changing DPLL multipliers or dividers
+ * on DPLL4.
+ */
+ if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0) &&
+ !strcmp("dpll4_ck", clk->name)) {
+ printk(KERN_ERR "clock: DPLL4 cannot change rate due to "
+ "silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+ _omap3_noncore_dpll_bypass(clk);
+
+ v = __raw_readl(dd->mult_div1_reg);
+ v &= ~(dd->mult_mask | dd->div1_mask);
+
+ /* Set mult (M), div1 (N), freqsel */
+ v |= m << __ffs(dd->mult_mask);
+ v |= n << __ffs(dd->div1_mask);
+ v |= freqsel << __ffs(dd->freqsel_mask);
+
+ __raw_writel(v, dd->mult_div1_reg);
+
+ /* We let the clock framework set the other output dividers later */
+
+ /* REVISIT: Set ramp-up delay? */
+
+ _omap3_noncore_dpll_lock(clk);
+
+ return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Program the DPLL with the rounded target rate. Returns -EINVAL upon
+ * error, or 0 upon success.
+ */
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ u16 freqsel;
+ struct dpll_data *dd;
+
+ if (!clk || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (rate == omap2_get_dpll_rate(clk))
+ return 0;
+
+ if (dd->last_rounded_rate != rate)
+ omap2_dpll_round_rate(clk, rate);
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
+
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ if (!freqsel)
+ WARN_ON(1);
+
+ omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n,
+ freqsel);
+
+ omap3_dpll_recalc(clk);
+
+ return 0;
+}
+
+/* DPLL autoidle read/set code */
+
+
/**
* omap3_dpll_autoidle_read - read a DPLL's autoidle bits
* @clk: struct clk * of the DPLL to read
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index a1db551..aa871c2 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -34,6 +34,7 @@ static void omap3_dpll_deny_idle(struct clk *clk);
static u32 omap3_dpll_autoidle_read(struct clk *clk);
static int omap3_noncore_dpll_enable(struct clk *clk);
static void omap3_noncore_dpll_disable(struct clk *clk);
+static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
/* Maximum DPLL multiplier, divider values for OMAP3 */
#define OMAP3_MAX_DPLL_MULT 2048
@@ -263,6 +264,7 @@ static struct dpll_data dpll1_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_MPU_DPLL_MULT_MASK,
.div1_mask = OMAP3430_MPU_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_MPU_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
@@ -284,6 +286,7 @@ static struct clk dpll1_ck = {
.dpll_data = &dpll1_dd,
.flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -329,6 +332,7 @@ static struct dpll_data dpll2_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
.mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK,
.div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
.enable_mask = OMAP3430_EN_IVA2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
@@ -353,6 +357,7 @@ static struct clk dpll2_ck = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -387,6 +392,7 @@ static struct dpll_data dpll3_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
.mult_mask = OMAP3430_CORE_DPLL_MULT_MASK,
.div1_mask = OMAP3430_CORE_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_CORE_DPLL_MASK,
.auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
@@ -565,6 +571,7 @@ static struct dpll_data dpll4_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
.mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK,
.div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -588,6 +595,7 @@ static struct clk dpll4_ck = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
@@ -867,6 +875,7 @@ static struct dpll_data dpll5_dd = {
.mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
.mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
.div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+ .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
.control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
.enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
@@ -890,6 +899,7 @@ static struct clk dpll5_ck = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.round_rate = &omap2_dpll_round_rate,
+ .set_rate = &omap3_noncore_dpll_set_rate,
.recalc = &omap3_dpll_recalc,
};
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index f40253d..d1c04be 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -43,6 +43,7 @@ struct dpll_data {
u8 max_divider;
u32 max_tolerance;
# if defined(CONFIG_ARCH_OMAP3)
+ u32 freqsel_mask;
u8 modes;
void __iomem *control_reg;
u32 enable_mask;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
