RE: [PATCH 06/11] mpu off state enabled

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 

> -----Original Message-----
> From: "Högander" Jouni [mailto:jouni.hogander@xxxxxxxxx] 
> Sent: Wednesday, July 02, 2008 5:49 PM
> To: ext Rajendra Nayak
> Cc: linux-omap@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH 06/11] mpu off state enabled
> 
> "ext Rajendra Nayak" <rnayak@xxxxxx> writes:
> 
> > This patch updates the CPUidle code to handle MPU OFF 
> related C states
> >
> > Signed-off-by: Rajendra Nayak <rnayak@xxxxxx>
> >
> > ---
> >  arch/arm/mach-omap2/cpuidle34xx.c |   19 +++++++++++++++----
> >  arch/arm/mach-omap2/cpuidle34xx.h |    5 +++++
> >  2 files changed, 20 insertions(+), 4 deletions(-)
> >
> > Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c
> > ===================================================================
> > --- linux-omap-2.6.orig/arch/arm/mach-omap2/cpuidle34xx.c	
> 2008-07-01 16:47:53.000000000 +0530
> > +++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.c	
> 2008-07-01 16:55:39.112465404 +0530
> > @@ -82,8 +82,12 @@ static int omap3_enter_idle(struct cpuid
> >  
> >  	/* Program MPU to target state */
> >  	if (cx->mpu_state < PWRDM_POWER_ON) {
> > -		if (neon_pwrst == PWRDM_POWER_ON)
> > -			pwrdm_set_next_pwrst(neon_pd, PWRDM_POWER_RET);
> > +		if (neon_pwrst == PWRDM_POWER_ON) {
> > +			if (cx->mpu_state == PWRDM_POWER_RET)
> > +				pwrdm_set_next_pwrst(neon_pd, 
> PWRDM_POWER_RET);
> > +			else if (cx->mpu_state == PWRDM_POWER_OFF)
> > +				pwrdm_set_next_pwrst(neon_pd, 
> PWRDM_POWER_OFF);
> 
> How about pwrdm_set_next_pwrst(neon_pd, cx->mpu_state)?

Yes, I initially had it this way. Then thought calling a set_next for neon 
and passing it the mpu_state might be confusing to read.
Can change it back and maybe put some comments anyway.

> 
> > +		}
> >  		pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
> >  	}
> >  
> > @@ -99,9 +103,13 @@ static int omap3_enter_idle(struct cpuid
> >  		pwrdm_set_next_pwrst(core_pd, cx->core_state);
> >  	}
> >  
> > +	*(scratchpad_restore_addr) = restore_pointer_address;
> > +
> >  	/* Execute ARM wfi */
> >  	omap_sram_idle();
> >  
> > +	*(scratchpad_restore_addr) = 0x0;
> > +
> >  	/* Program MPU/NEON to ON */
> >  	if (cx->mpu_state < PWRDM_POWER_ON) {
> >  		if (neon_pwrst == PWRDM_POWER_ON)
> > @@ -211,7 +219,7 @@ void omap_init_power_states(void)
> >  						CPUIDLE_FLAG_BALANCED;
> >  
> >  	/* C3 . MPU OFF + Core active */
> > -	omap3_power_states[3].valid = 0;
> > +	omap3_power_states[3].valid = 1;
> >  	omap3_power_states[3].type = OMAP3_STATE_C3;
> >  	omap3_power_states[3].sleep_latency = 1500;
> >  	omap3_power_states[3].wakeup_latency = 1800;
> > @@ -233,7 +241,7 @@ void omap_init_power_states(void)
> >  			CPUIDLE_FLAG_BALANCED | CPUIDLE_FLAG_CHECK_BM;
> >  
> >  	/* C5 . MPU OFF + Core CSWR */
> > -	omap3_power_states[5].valid = 0;
> > +	omap3_power_states[5].valid = 1;
> >  	omap3_power_states[5].type = OMAP3_STATE_C5;
> >  	omap3_power_states[5].sleep_latency = 3000;
> >  	omap3_power_states[5].wakeup_latency = 8500;
> > @@ -270,6 +278,9 @@ int omap3_idle_init(void)
> >  	struct cpuidle_state *state;
> >  	struct cpuidle_device *dev;
> >  
> > +	clear_scratchpad_contents();
> > +	save_scratchpad_contents();
> > +
> >  	omap_init_power_states();
> >  	cpuidle_register_driver(&omap3_idle_driver);
> >  
> > Index: linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h
> > ===================================================================
> > --- linux-omap-2.6.orig/arch/arm/mach-omap2/cpuidle34xx.h	
> 2008-07-01 16:25:16.000000000 +0530
> > +++ linux-omap-2.6/arch/arm/mach-omap2/cpuidle34xx.h	
> 2008-07-01 16:56:13.298377929 +0530
> > @@ -40,6 +40,11 @@ extern void per_gpio_clk_enable(void);
> >  extern void per_gpio_clk_disable(void);
> >  extern void omap_serial_enable_clocks(int enable);
> >  extern int omap3_can_sleep();
> > +extern void clear_scratchpad_contents(void);
> > +extern void save_scratchpad_contents(void);
> > +extern u32 *scratchpad_restore_addr;
> > +extern u32 restore_pointer_address;
> > +
> >  struct omap3_processor_cx {
> >  	u8 valid;
> >  	u8 type;
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe 
> linux-omap" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> >
> 
> -- 
> Jouni Högander
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux