In omap3 gpios 2-6 are in per domain. Functional clocks for these
should be disabled. This patch is needed until gpio driver disables
gpio clocks.
GPIO modules in PER domain are not able to act as a wake up source if
PER domain is in retention. PER domain sleep transition before MPU is
prevented by leaving icks active. PER domain still enters retention
together with MPU. When this happens IOPAD wake up mechanism is used
for gpios.
Signed-off-by: Jouni Hogander <jouni.hogander@xxxxxxxxx>
---
arch/arm/mach-omap2/pm34xx.c | 58 +++++++++++++++++++++++++++++++++++++++--
1 files changed, 55 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 92e56cd..2b7ca5f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -47,12 +47,42 @@ struct power_state {
static LIST_HEAD(pwrst_list);
-void (*_omap_sram_idle)(u32 *addr, int save_state);
+void (*_omap_sram_idle)(u32 *addr, int save_state, int disable_clocks);
static void (*saved_idle)(void);
static struct powerdomain *mpu_pwrdm;
+/* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+#define NUM_OF_PERGPIOS 5
+static struct clk *gpio_fcks[NUM_OF_PERGPIOS];
+
+/* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+static void per_gpio_clk_enable(void)
+{
+ int i;
+ for (i = 1; i < NUM_OF_PERGPIOS + 1; i++)
+ clk_enable(gpio_fcks[i-1]);
+}
+
+/* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+static void per_gpio_clk_disable(void)
+{
+ int i;
+ for (i = 1; i < NUM_OF_PERGPIOS + 1; i++)
+ clk_disable(gpio_fcks[i-1]);
+}
+
+/* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+static void gpio_fclk_mask(u32 *fclk)
+{
+ *fclk &= ~(0x1f << 13);
+}
+
/* PRCM Interrupt Handler for wakeups */
static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
{
@@ -169,7 +199,17 @@ static void omap_sram_idle(void)
omap2_gpio_prepare_for_retention();
- _omap_sram_idle(NULL, save_state);
+ /* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+ if (clocks_off_while_idle)
+ per_gpio_clk_disable();
+
+ _omap_sram_idle(NULL, save_state, clocks_off_while_idle);
+
+ /* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+ if (clocks_off_while_idle)
+ per_gpio_clk_enable();
omap2_gpio_resume_after_retention();
}
@@ -197,6 +237,10 @@ static int omap3_fclks_active(void)
CM_FCLKEN);
fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
CM_FCLKEN);
+
+ if (clocks_off_while_idle)
+ gpio_fclk_mask(&fck_per);
+
if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
fck_cam | fck_per | fck_usbhost)
return 1;
@@ -412,7 +456,8 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm)
int __init omap3_pm_init(void)
{
struct power_state *pwrst;
- int ret;
+ char clk_name[11];
+ int ret, i;
printk(KERN_ERR "Power Management for TI OMAP3.\n");
@@ -448,6 +493,13 @@ int __init omap3_pm_init(void)
pm_idle = omap3_pm_idle;
+ /* XXX This is for gpio fclk hack. Will be removed as gpio driver
+ * handles fcks correctly */
+ for (i = 1; i < NUM_OF_PERGPIOS + 1; i++) {
+ sprintf(clk_name, "gpio%d_fck", i + 1);
+ gpio_fcks[i-1] = clk_get(NULL, clk_name);
+ }
+
err1:
return ret;
err2:
--
1.5.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
