* Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx> [080619 13:41]: > Added new register and bit definitions to enable Smartreflex driver > integration. Also PRM_VC_SMPS_SA bit definitions' naming was changed to match > the naming of other similar bit definitions. Pushing today. Tony > > Signed-off-by: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx> > --- > arch/arm/mach-omap2/prm-regbits-34xx.h | 27 +++- > arch/arm/mach-omap2/smartreflex.h | 235 ++++++++++++++++++++++++++++++++ > include/asm-arm/arch-omap/control.h | 19 +++ > include/asm-arm/arch-omap/omap34xx.h | 2 + > 4 files changed, 278 insertions(+), 5 deletions(-) > create mode 100644 arch/arm/mach-omap2/smartreflex.h > > diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h > index c6a7940..f82b5a7 100644 > --- a/arch/arm/mach-omap2/prm-regbits-34xx.h > +++ b/arch/arm/mach-omap2/prm-regbits-34xx.h > @@ -435,10 +435,10 @@ > /* PM_PWSTST_EMU specific bits */ > > /* PRM_VC_SMPS_SA */ > -#define OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT 16 > -#define OMAP3430_PRM_VC_SMPS_SA_SA1_MASK (0x7f << 16) > -#define OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT 0 > -#define OMAP3430_PRM_VC_SMPS_SA_SA0_MASK (0x7f << 0) > +#define OMAP3430_SMPS_SA1_SHIFT 16 > +#define OMAP3430_SMPS_SA1_MASK (0x7f << 16) > +#define OMAP3430_SMPS_SA0_SHIFT 0 > +#define OMAP3430_SMPS_SA0_MASK (0x7f << 0) > > /* PRM_VC_SMPS_VOL_RA */ > #define OMAP3430_VOLRA1_SHIFT 16 > @@ -452,7 +452,7 @@ > #define OMAP3430_CMDRA0_SHIFT 0 > #define OMAP3430_CMDRA0_MASK (0xff << 0) > > -/* PRM_VC_CMD_VAL_0 specific bits */ > +/* PRM_VC_CMD_VAL */ > #define OMAP3430_VC_CMD_ON_SHIFT 24 > #define OMAP3430_VC_CMD_ON_MASK (0xFF << 24) > #define OMAP3430_VC_CMD_ONLP_SHIFT 16 > @@ -462,7 +462,17 @@ > #define OMAP3430_VC_CMD_OFF_SHIFT 0 > #define OMAP3430_VC_CMD_OFF_MASK (0xFF << 0) > > +/* PRM_VC_CMD_VAL_0 specific bits */ > +#define OMAP3430_VC_CMD_VAL0_ON (0x3 << 4) > +#define OMAP3430_VC_CMD_VAL0_ONLP (0x3 << 3) > +#define OMAP3430_VC_CMD_VAL0_RET (0x3 << 3) > +#define OMAP3430_VC_CMD_VAL0_OFF (0x3 << 3) > + > /* PRM_VC_CMD_VAL_1 specific bits */ > +#define OMAP3430_VC_CMD_VAL1_ON (0xB << 2) > +#define OMAP3430_VC_CMD_VAL1_ONLP (0x3 << 3) > +#define OMAP3430_VC_CMD_VAL1_RET (0x3 << 3) > +#define OMAP3430_VC_CMD_VAL1_OFF (0x3 << 3) > > /* PRM_VC_CH_CONF */ > #define OMAP3430_CMD1 (1 << 20) > @@ -521,6 +531,13 @@ > #define OMAP3430_AUTO_RET (1 << 1) > #define OMAP3430_AUTO_SLEEP (1 << 0) > > +/* Constants to define setup durations */ > +#define OMAP3430_CLKSETUP_DURATION 0xff > +#define OMAP3430_VOLTSETUP_TIME2 0xfff > +#define OMAP3430_VOLTSETUP_TIME1 0xfff > +#define OMAP3430_VOLTOFFSET_DURATION 0xff > +#define OMAP3430_VOLTSETUP2_DURATION 0xff > + > /* PRM_SRAM_PCHARGE */ > #define OMAP3430_PCHARGE_TIME_SHIFT 0 > #define OMAP3430_PCHARGE_TIME_MASK (0xff << 0) > diff --git a/arch/arm/mach-omap2/smartreflex.h b/arch/arm/mach-omap2/smartreflex.h > new file mode 100644 > index 0000000..574329f > --- /dev/null > +++ b/arch/arm/mach-omap2/smartreflex.h > @@ -0,0 +1,235 @@ > +#ifndef __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H > +#define __ARCH_ARM_MACH_OMAP3_SMARTREFLEX_H > +/* > + * linux/arch/arm/mach-omap2/smartreflex.h > + * > + * Copyright (C) 2008 Nokia Corporation > + * Kalle Jokiniemi > + * > + * Copyright (C) 2007 Texas Instruments, Inc. > + * Lesly A M <x0080970@xxxxxx> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36) > +#define PHY_TO_OFF_PM_RECIEVER(p) (p - 0x5b) > +#define PHY_TO_OFF_PM_INT(p) (p - 0x2e) > + > +/* SMART REFLEX REG ADDRESS OFFSET */ > +#define SRCONFIG 0x00 > +#define SRSTATUS 0x04 > +#define SENVAL 0x08 > +#define SENMIN 0x0C > +#define SENMAX 0x10 > +#define SENAVG 0x14 > +#define AVGWEIGHT 0x18 > +#define NVALUERECIPROCAL 0x1C > +#define SENERROR 0x20 > +#define ERRCONFIG 0x24 > + > +/* SR Modules */ > +#define SR1 1 > +#define SR2 2 > + > +#define SR_FAIL 1 > +#define SR_PASS 0 > + > +#define SR_TRUE 1 > +#define SR_FALSE 0 > + > +#define GAIN_MAXLIMIT 16 > +#define R_MAXLIMIT 256 > + > +#define SR1_CLK_ENABLE (0x1 << 6) > +#define SR2_CLK_ENABLE (0x1 << 7) > + > +/* PRM_VP1_CONFIG */ > +#define PRM_VP1_CONFIG_ERROROFFSET (0x00 << 24) > +#define PRM_VP1_CONFIG_ERRORGAIN (0x20 << 16) > + > +#define PRM_VP1_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ > +#define PRM_VP1_CONFIG_TIMEOUTEN (0x1 << 3) > +#define PRM_VP1_CONFIG_INITVDD (0x1 << 2) > +#define PRM_VP1_CONFIG_FORCEUPDATE (0x1 << 1) > +#define PRM_VP1_CONFIG_VPENABLE (0x1 << 0) > + > +/* PRM_VP1_VSTEPMIN */ > +#define PRM_VP1_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) > +#define PRM_VP1_VSTEPMIN_VSTEPMIN (0x01 << 0) > + > +/* PRM_VP1_VSTEPMAX */ > +#define PRM_VP1_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) > +#define PRM_VP1_VSTEPMAX_VSTEPMAX (0x04 << 0) > + > +/* PRM_VP1_VLIMITTO */ > +#define PRM_VP1_VLIMITTO_VDDMAX (0x3C << 24) > +#define PRM_VP1_VLIMITTO_VDDMIN (0x0 << 16) > +#define PRM_VP1_VLIMITTO_TIMEOUT (0xFFFF << 0) > + > +/* PRM_VP2_CONFIG */ > +#define PRM_VP2_CONFIG_ERROROFFSET (0x00 << 24) > +#define PRM_VP2_CONFIG_ERRORGAIN (0x20 << 16) > + > +#define PRM_VP2_CONFIG_INITVOLTAGE (0x30 << 8) /* 1.2 volt */ > +#define PRM_VP2_CONFIG_TIMEOUTEN (0x1 << 3) > +#define PRM_VP2_CONFIG_INITVDD (0x1 << 2) > +#define PRM_VP2_CONFIG_FORCEUPDATE (0x1 << 1) > +#define PRM_VP2_CONFIG_VPENABLE (0x1 << 0) > + > +/* PRM_VP2_VSTEPMIN */ > +#define PRM_VP2_VSTEPMIN_SMPSWAITTIMEMIN (0x01F4 << 8) > +#define PRM_VP2_VSTEPMIN_VSTEPMIN (0x01 << 0) > + > +/* PRM_VP2_VSTEPMAX */ > +#define PRM_VP2_VSTEPMAX_SMPSWAITTIMEMAX (0x01F4 << 8) > +#define PRM_VP2_VSTEPMAX_VSTEPMAX (0x04 << 0) > + > +/* PRM_VP2_VLIMITTO */ > +#define PRM_VP2_VLIMITTO_VDDMAX (0x2C << 24) > +#define PRM_VP2_VLIMITTO_VDDMIN (0x0 << 16) > +#define PRM_VP2_VLIMITTO_TIMEOUT (0xFFFF << 0) > + > +/* SRCONFIG */ > +#define SR1_SRCONFIG_ACCUMDATA (0x1F4 << 22) > +#define SR2_SRCONFIG_ACCUMDATA (0x1F4 << 22) > + > +#define SRCLKLENGTH_12MHZ_SYSCLK 0x3C > +#define SRCLKLENGTH_13MHZ_SYSCLK 0x41 > +#define SRCLKLENGTH_19MHZ_SYSCLK 0x60 > +#define SRCLKLENGTH_26MHZ_SYSCLK 0x82 > +#define SRCLKLENGTH_38MHZ_SYSCLK 0xC0 > + > +#define SRCONFIG_SRCLKLENGTH_SHIFT 12 > +#define SRCONFIG_SENNENABLE_SHIFT 5 > +#define SRCONFIG_SENPENABLE_SHIFT 3 > + > +#define SRCONFIG_SRENABLE (0x01 << 11) > +#define SRCONFIG_SENENABLE (0x01 << 10) > +#define SRCONFIG_ERRGEN_EN (0x01 << 9) > +#define SRCONFIG_MINMAXAVG_EN (0x01 << 8) > + > +#define SRCONFIG_DELAYCTRL (0x01 << 2) > +#define SRCONFIG_CLKCTRL (0x00 << 0) > + > +/* AVGWEIGHT */ > +#define SR1_AVGWEIGHT_SENPAVGWEIGHT (0x03 << 2) > +#define SR1_AVGWEIGHT_SENNAVGWEIGHT (0x03 << 0) > + > +#define SR2_AVGWEIGHT_SENPAVGWEIGHT (0x01 << 2) > +#define SR2_AVGWEIGHT_SENNAVGWEIGHT (0x01 << 0) > + > +/* NVALUERECIPROCAL */ > +#define NVALUERECIPROCAL_SENPGAIN_SHIFT 20 > +#define NVALUERECIPROCAL_SENNGAIN_SHIFT 16 > +#define NVALUERECIPROCAL_RNSENP_SHIFT 8 > +#define NVALUERECIPROCAL_RNSENN_SHIFT 0 > + > +/* ERRCONFIG */ > +#define SR_CLKACTIVITY_MASK (0x03 << 20) > +#define SR_ERRWEIGHT_MASK (0x07 << 16) > +#define SR_ERRMAXLIMIT_MASK (0xFF << 8) > +#define SR_ERRMINLIMIT_MASK (0xFF << 0) > + > +#define SR_CLKACTIVITY_IOFF_FOFF (0x00 << 20) > +#define SR_CLKACTIVITY_IOFF_FON (0x02 << 20) > + > +#define ERRCONFIG_VPBOUNDINTEN (0x1 << 31) > +#define ERRCONFIG_VPBOUNDINTST (0x1 << 30) > + > +#define SR1_ERRWEIGHT (0x07 << 16) > +#define SR1_ERRMAXLIMIT (0x02 << 8) > +#define SR1_ERRMINLIMIT (0xFA << 0) > + > +#define SR2_ERRWEIGHT (0x07 << 16) > +#define SR2_ERRMAXLIMIT (0x02 << 8) > +#define SR2_ERRMINLIMIT (0xF9 << 0) > + > +/* T2 SMART REFLEX */ > +#define R_SRI2C_SLAVE_ADDR 0x12 > +#define R_VDD1_SR_CONTROL 0x00 > +#define R_VDD2_SR_CONTROL 0x01 > +#define T2_SMPS_UPDATE_DELAY 360 /* In uSec */ > + > +/* Vmode control */ > +#define R_DCDC_GLOBAL_CFG PHY_TO_OFF_PM_RECIEVER(0x61) > + > +#define R_VDD1_VSEL PHY_TO_OFF_PM_RECIEVER(0xb9) > +#define R_VDD1_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xba) > +#define R_VDD1_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xbb) > +#define R_VDD1_VROOF PHY_TO_OFF_PM_RECIEVER(0xbc) > +#define R_VDD1_STEP PHY_TO_OFF_PM_RECIEVER(0xbd) > + > +#define R_VDD2_VSEL PHY_TO_OFF_PM_RECIEVER(0xc7) > +#define R_VDD2_VMODE_CFG PHY_TO_OFF_PM_RECIEVER(0xc8) > +#define R_VDD2_VFLOOR PHY_TO_OFF_PM_RECIEVER(0xc9) > +#define R_VDD2_VROOF PHY_TO_OFF_PM_RECIEVER(0xca) > +#define R_VDD2_STEP PHY_TO_OFF_PM_RECIEVER(0xcb) > + > +/* R_DCDC_GLOBAL_CFG register, SMARTREFLEX_ENABLE values */ > +#define DCDC_GLOBAL_CFG_ENABLE_SRFLX 0x08 > + > +/* VDDs*/ > +#define PRCM_VDD1 1 > +#define PRCM_VDD2 2 > +#define PRCM_MAX_SYSC_REGS 30 > + > +/* > + * XXX: These should be removed/moved from here once we have a working DVFS > + * implementation in place > + */ > +#define AT_3430 1 /*3430 ES 1.0 */ > +#define AT_3430_ES2 2 /*3430 ES 2.0 */ > + > +#define ID_OPP 0xE2 /*OPP*/ > + > +/* DEVICE ID/DPLL ID/CLOCK ID: bits 28-31 for OMAP type */ > +#define OMAP_TYPE_SHIFT 28 > +#define OMAP_TYPE_MASK 0xF > +/* OPP ID: bits: 0-4 for OPP number */ > +#define OPP_NO_POS 0 > +#define OPP_NO_MASK 0x1F > +/* OPP ID: bits: 5-6 for VDD */ > +#define VDD_NO_POS 5 > +#define VDD_NO_MASK 0x3 > +/* Other IDs: bits 20-27 for ID type */ > +/* These IDs have bits 25,26,27 as 1 */ > +#define OTHER_ID_TYPE_SHIFT 20 > +#define OTHER_ID_TYPE_MASK 0xFF > + > +#define OTHER_ID_TYPE(X) ((X & OTHER_ID_TYPE_MASK) << OTHER_ID_TYPE_SHIFT) > +#define ID_OPP_NO(X) ((X & OPP_NO_MASK) << OPP_NO_POS) > +#define ID_VDD(X) ((X & VDD_NO_MASK) << VDD_NO_POS) > +#define OMAP(X) ((X >> OMAP_TYPE_SHIFT) & OMAP_TYPE_MASK) > +#define get_opp_no(X) ((X >> OPP_NO_POS) & OPP_NO_MASK) > +#define get_vdd(X) ((X >> VDD_NO_POS) & VDD_NO_MASK) > + > +/* VDD1 OPPs */ > +#define PRCM_VDD1_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x1)) > +#define PRCM_VDD1_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x2)) > +#define PRCM_VDD1_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x3)) > +#define PRCM_VDD1_OPP4 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x4)) > +#define PRCM_VDD1_OPP5 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD1) | ID_OPP_NO(0x5)) > +#define PRCM_NO_VDD1_OPPS 5 > + > + > +/* VDD2 OPPs */ > +#define PRCM_VDD2_OPP1 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x1)) > +#define PRCM_VDD2_OPP2 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x2)) > +#define PRCM_VDD2_OPP3 (OMAP(AT_3430_ES2) | OTHER_ID_TYPE(ID_OPP) | \ > + ID_VDD(PRCM_VDD2) | ID_OPP_NO(0x3)) > +#define PRCM_NO_VDD2_OPPS 3 > +/* XXX: end remove/move */ > + > +#endif > + > + > diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h > index 12bc22a..6e64fe7 100644 > --- a/include/asm-arm/arch-omap/control.h > +++ b/include/asm-arm/arch-omap/control.h > @@ -138,6 +138,15 @@ > #define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) > #define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) > #define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) > +#define OMAP343X_CONTROL_FUSE_OPP1_VDD1 (OMAP2_CONTROL_GENERAL + 0x0110) > +#define OMAP343X_CONTROL_FUSE_OPP2_VDD1 (OMAP2_CONTROL_GENERAL + 0x0114) > +#define OMAP343X_CONTROL_FUSE_OPP3_VDD1 (OMAP2_CONTROL_GENERAL + 0x0118) > +#define OMAP343X_CONTROL_FUSE_OPP4_VDD1 (OMAP2_CONTROL_GENERAL + 0x011c) > +#define OMAP343X_CONTROL_FUSE_OPP5_VDD1 (OMAP2_CONTROL_GENERAL + 0x0120) > +#define OMAP343X_CONTROL_FUSE_OPP1_VDD2 (OMAP2_CONTROL_GENERAL + 0x0124) > +#define OMAP343X_CONTROL_FUSE_OPP2_VDD2 (OMAP2_CONTROL_GENERAL + 0x0128) > +#define OMAP343X_CONTROL_FUSE_OPP3_VDD2 (OMAP2_CONTROL_GENERAL + 0x012c) > +#define OMAP343X_CONTROL_FUSE_SR (OMAP2_CONTROL_GENERAL + 0x0130) > #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) > #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) > #define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4) > @@ -172,6 +181,16 @@ > #define OMAP2_SYSBOOT_1_MASK (1 << 1) > #define OMAP2_SYSBOOT_0_MASK (1 << 0) > > +/* CONTROL_FUSE_SR bits */ > +#define OMAP343X_SR2_SENNENABLE_MASK (0x3 << 10) > +#define OMAP343X_SR2_SENNENABLE_SHIFT 10 > +#define OMAP343X_SR2_SENPENABLE_MASK (0x3 << 8) > +#define OMAP343X_SR2_SENPENABLE_SHIFT 8 > +#define OMAP343X_SR1_SENNENABLE_MASK (0x3 << 2) > +#define OMAP343X_SR1_SENNENABLE_SHIFT 2 > +#define OMAP343X_SR1_SENPENABLE_MASK (0x3 << 0) > +#define OMAP343X_SR1_SENPENABLE_SHIFT 0 > + > #ifndef __ASSEMBLY__ > #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) > extern void __iomem *omap_ctrl_base_get(void); > diff --git a/include/asm-arm/arch-omap/omap34xx.h b/include/asm-arm/arch-omap/omap34xx.h > index aa30c6d..f54dc0b 100644 > --- a/include/asm-arm/arch-omap/omap34xx.h > +++ b/include/asm-arm/arch-omap/omap34xx.h > @@ -53,6 +53,8 @@ > #define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000) > #define OMAP34XX_HSUSB_HOST_BASE (L4_34XX_BASE + 0x64000) > #define OMAP34XX_USBTLL_BASE (L4_34XX_BASE + 0x62000) > +#define OMAP34XX_SR1_BASE 0x480C9000 > +#define OMAP34XX_SR2_BASE 0x480CB000 > > > #if defined(CONFIG_ARCH_OMAP3430) > -- > 1.5.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
