* Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx> [080610 14:26]:
>
> Op 31 mei 2008, om 02:59 heeft Koen Kooi het volgende geschreven:
>
> > From: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
> >
> > omap3beagle: add a platform device to hook up the GPIO leds to the
> > leds-gpio driver
> > * on revision A5 and earlier board the two leds can't be controlled
> > seperately, should be fixed in rev. B and C boards.
> >
> > Changes since v1: indented structs with tabs
> >
> > Signed-off-by: Koen Kooi <koen@xxxxxxxxxxxxxxxx>
>
>
> Any objections against applying this patch?
Nope, and blinking leds are always considered the highhest priority
patches ;) Pushing today.
Tony
>
>
>
>
> >
> > ---
> > arch/arm/mach-omap2/board-omap3beagle.c | 28 ++++++++++++++++++++++
> > ++++++
> > 1 files changed, 28 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-
> > omap2/board-omap3beagle.c
> > index c992cc7..83891fc 100644
> > --- a/arch/arm/mach-omap2/board-omap3beagle.c
> > +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> > @@ -19,6 +19,7 @@
> > #include <linux/err.h>
> > #include <linux/clk.h>
> > #include <linux/io.h>
> > +#include <linux/leds.h>
> >
> > #include <asm/hardware.h>
> > #include <asm/mach-types.h>
> > @@ -72,6 +73,32 @@ static struct omap_lcd_config
> > omap3_beagle_lcd_config __initdata = {
> > .ctrl_name = "internal",
> > };
> >
> > +struct gpio_led gpio_leds[] = {
> > + {
> > + .name = "beagleboard::led0",
> > + .default_trigger = "none",
> > + .gpio = 149,
> > + },
> > + {
> > + .name = "beagleboard::led1",
> > + .default_trigger = "none",
> > + .gpio = 150,
> > + },
> > +};
> > +
> > +static struct gpio_led_platform_data gpio_led_info = {
> > + .leds = gpio_leds,
> > + .num_leds = ARRAY_SIZE(gpio_leds),
> > +};
> > +
> > +static struct platform_device leds_gpio = {
> > + .name = "leds-gpio",
> > + .id = -1,
> > + .dev = {
> > + .platform_data = &gpio_led_info,
> > + },
> > +};
> > +
> > static struct omap_board_config_kernel omap3_beagle_config[]
> > __initdata = {
> > { OMAP_TAG_UART, &omap3_beagle_uart_config },
> > { OMAP_TAG_MMC, &omap3beagle_mmc_config },
> > @@ -83,6 +110,7 @@ static struct platform_device
> > *omap3_beagle_devices[] __initdata = {
> > #ifdef CONFIG_RTC_DRV_TWL4030
> > &omap3_beagle_twl4030rtc_device,
> > #endif
> > + &leds_gpio,
> > };
> >
> > static void __init omap3_beagle_init(void)
> > --
> > 1.5.4.3
> >
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
