From: Syed Mohammed Khasim <x0khasim@xxxxxx>
Add minimal omap3430 support
Signed-off-by: Syed Mohammed Khasim <x0khasim@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 7069c9d..a4582a9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -14,9 +14,19 @@ config ARCH_OMAP2420
config ARCH_OMAP2430
bool "OMAP2430 support"
depends on ARCH_OMAP24XX
+ select ARCH_OMAP_OTG
+
+config ARCH_OMAP34XX
+ bool "OMAP34xx Based System"
+ depends on ARCH_OMAP3
+
+config ARCH_OMAP3430
+ bool "OMAP3430 support"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+ select ARCH_OMAP_OTG
comment "OMAP Board Type"
- depends on ARCH_OMAP2
+ depends on ARCH_OMAP2 || ARCH_OMAP3
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 4e84673..e1734ae 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
+obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o
# Power Management
ifeq ($(CONFIG_PM),y)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index d825100..314994b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -113,6 +113,59 @@ static struct map_desc omap243x_io_desc[] __initdata = {
#endif
#endif
+#ifdef CONFIG_ARCH_OMAP34XX
+static struct map_desc omap34xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_34XX_VIRT,
+ .pfn = __phys_to_pfn(L3_34XX_PHYS),
+ .length = L3_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_34XX_PHYS),
+ .length = L4_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_WK_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
+ .length = L4_WK_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP34XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
+ .length = OMAP34XX_GPMC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SMS_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
+ .length = OMAP343X_SMS_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = OMAP343X_SDRC_VIRT,
+ .pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
+ .length = OMAP343X_SDRC_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_PER_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
+ .length = L4_PER_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = L4_EMU_34XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
+ .length = L4_EMU_34XX_SIZE,
+ .type = MT_DEVICE
+ },
+};
+#endif
+
void __init omap2_map_common_io(void)
{
#if defined(CONFIG_ARCH_OMAP2420)
@@ -125,6 +178,10 @@ void __init omap2_map_common_io(void)
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+ iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
+#endif
+
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index f064f72..8ff6fef 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -37,11 +37,9 @@ static struct omap_irq_bank {
} __attribute__ ((aligned(4))) irq_banks[] = {
{
/* MPU INTC */
- .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE),
+ .base_reg = 0,
.nr_irqs = 96,
- }, {
- /* XXX: DSP INTC */
- }
+ },
};
/* XXX: FIQ and additional INTC support (only MPU at the moment) */
@@ -118,10 +116,10 @@ void __init omap_init_irq(void)
for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
struct omap_irq_bank *bank = irq_banks + i;
- /* XXX */
- if (!bank->base_reg)
- continue;
-
+ if (cpu_is_omap24xx())
+ bank->base_reg = IO_ADDRESS(OMAP24XX_IC_BASE);
+ if (cpu_is_omap34xx())
+ bank->base_reg = IO_ADDRESS(OMAP34XX_IC_BASE);
omap_irq_bank_init_one(bank);
nr_irqs += bank->nr_irqs;
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index ef62bf2..a94f0c4 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -15,6 +15,9 @@ config ARCH_OMAP1
config ARCH_OMAP2
bool "TI OMAP2"
+config ARCH_OMAP3
+ bool "TI OMAP3"
+
endchoice
comment "OMAP Feature Selections"
@@ -112,13 +115,13 @@ config OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX and 24XX.
+ currently only available for OMAP16XX, 24XX and 34XX.
endchoice
@@ -133,7 +136,7 @@ config OMAP_32K_TIMER_HZ
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
help
Select this option if you want to use OMAP Dual-Mode timers.
diff --git a/include/asm-arm/arch-omap/debug-macro.S b/include/asm-arm/arch-omap/debug-macro.S
index ca4f577..3866e04 100644
--- a/include/asm-arm/arch-omap/debug-macro.S
+++ b/include/asm-arm/arch-omap/debug-macro.S
@@ -35,6 +35,18 @@
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
+
+#elif CONFIG_ARCH_OMAP3
+ moveq \rx, #0x48000000 @ physical base address
+ movne \rx, #0xd8000000 @ virtual base
+ orr \rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+ add \rx, \rx, #0x00002000 @ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+ add \rx, \rx, #0x00fb0000 @ UART 3
+ add \rx, \rx, #0x00006000
+#endif
#endif
.endm
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 369093a..6c836e2 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -55,9 +55,15 @@
1510:
.endm
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX)
#include <asm/arch/omap24xx.h>
+#endif
+#if defined(CONFIG_ARCH_OMAP34XX)
+#include <asm/arch/omap34xx.h>
+#endif
.macro disable_fiq
.endm
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 0b13557..ad272f2 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -88,6 +88,63 @@
#define OMAP243X_SMS_VIRT 0xFC000000
#define OMAP243X_SMS_SIZE SZ_1M
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 */
+#define L3_34XX_VIRT 0xf8000000
+#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 */
+#define L4_34XX_VIRT 0xd8000000
+#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT 0xd8300000
+#define L4_WK_34XX_SIZE SZ_1M
+
+#define L4_PER_34XX_PHYS L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT 0xd9000000
+#define L4_PER_34XX_SIZE SZ_1M
+
+#define L4_EMU_34XX_PHYS L4_34XX_EMU_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT 0xe4000000
+#define L4_EMU_34XX_SIZE SZ_64M
+
+#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT 0xFE000000
+#define OMAP34XX_GPMC_SIZE SZ_1M
+
+#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT 0xFC000000
+#define OMAP343X_SMS_SIZE SZ_1M
+
+#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT 0xFD000000
+#define OMAP343X_SDRC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS OMAP34XX_DSP_MEM_BASE /* 0x58000000 */
+#define DSP_MEM_34XX_VIRT 0xe0000000
+#define DSP_MEM_34XX_SIZE 0x28000
+#define DSP_IPI_34XX_PHYS OMAP34XX_DSP_IPI_BASE /* 0x59000000 */
+#define DSP_IPI_34XX_VIRT 0xe1000000
+#define DSP_IPI_34XX_SIZE SZ_4K
+#define DSP_MMU_34XX_PHYS OMAP34XX_DSP_MMU_BASE /* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT 0xe2000000
+#define DSP_MMU_34XX_SIZE SZ_4K
+
#endif
#define IO_OFFSET 0x90000000
diff --git a/include/asm-arm/arch-omap/irqs.h b/include/asm-arm/arch-omap/irqs.h
index f901e8b..956f53c 100644
--- a/include/asm-arm/arch-omap/irqs.h
+++ b/include/asm-arm/arch-omap/irqs.h
@@ -324,6 +324,33 @@
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
+#define INT_34XX_ST_MCBSP2_IRQ 4
+#define INT_34XX_ST_MCBSP3_IRQ 5
+#define INT_34XX_SYS_NIRQ 7
+#define INT_34XX_PRCM_MPU_IRQ 11
+#define INT_34XX_MCBSP1_IRQ 16
+#define INT_34XX_MCBSP2_IRQ 17
+#define INT_34XX_MCBSP3_IRQ 22
+#define INT_34XX_MCBSP4_IRQ 23
+#define INT_34XX_CAM_IRQ 24
+#define INT_34XX_MCBSP5_IRQ 27
+#define INT_34XX_GPIO_BANK1 29
+#define INT_34XX_GPIO_BANK2 30
+#define INT_34XX_GPIO_BANK3 31
+#define INT_34XX_GPIO_BANK4 32
+#define INT_34XX_GPIO_BANK5 33
+#define INT_34XX_GPIO_BANK6 34
+#define INT_34XX_USIM_IRQ 35
+#define INT_34XX_WDT3_IRQ 36
+#define INT_34XX_SPI4_IRQ 48
+#define INT_34XX_I2C3_IRQ 61
+#define INT_34XX_PBIAS_IRQ 75
+#define INT_34XX_OHCI_IRQ 76
+#define INT_34XX_EHCI_IRQ 77
+#define INT_34XX_TLL_IRQ 78
+#define INT_34XX_MMC3_IRQ 94
+#define INT_34XX_GPT12_IRQ 95
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
diff --git a/include/asm-arm/arch-omap/mcbsp.h b/include/asm-arm/arch-omap/mcbsp.h
index 26c78f6..82627bb 100644
--- a/include/asm-arm/arch-omap/mcbsp.h
+++ b/include/asm-arm/arch-omap/mcbsp.h
@@ -91,7 +91,7 @@
#define AUDIO_DMA_TX OMAP_DMA_MCBSP1_TX
#define AUDIO_DMA_RX OMAP_DMA_MCBSP1_RX
-#elif defined(CONFIG_ARCH_OMAP24XX)
+#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define OMAP_MCBSP_REG_DRR2 0x00
#define OMAP_MCBSP_REG_DRR1 0x04
diff --git a/include/asm-arm/arch-omap/memory.h b/include/asm-arm/arch-omap/memory.h
index 14cba97..d22c13d 100644
--- a/include/asm-arm/arch-omap/memory.h
+++ b/include/asm-arm/arch-omap/memory.h
@@ -38,7 +38,7 @@
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
#define PHYS_OFFSET UL(0x80000000)
#endif
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
