RE: [PATCH 0/7] 34XX: PM: Workarounds to get omap3 to retention 3rd.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: linux-omap-owner@xxxxxxxxxxxxxxx 
> [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Jouni Hogander
> Sent: Wednesday, June 25, 2008 2:42 PM
> To: linux-omap@xxxxxxxxxxxxxxx
> Subject: [PATCH 0/7] 34XX: PM: Workarounds to get omap3 to 
> retention 3rd.
> 
> Hi,
> 
> This patch set contains all workarounds that are needed to get omap3
> to retention. Also patch from Tero Kristo to get PM to work if using
> serial console is included in this set. Basically all patches in this
> set should be reverted one by one as correct fixes are implemented and
> applied.
> 
> This patch set superseeds earlier version sent 2008-06-17 7:28:35.
> 
> To get Omap into retention, this patch set still depends on:
> 1. ARCH: OMAP: MUSB: Do not block sleep (Felipe Balbi)
> 2. ARM: OMAP: SmartReflex driver: enable in 
> omap_3430sdp_defconfig (Kalle
>    Jokiniemi)
> 3. PRCM: 34XX: Fix wrong shift value used in dpll4_m4x2_ck enable bit
> 4. Patch which removes control of usbhost_sar_fck from clock 
> tree (Paul
>    Walmsley will send this soon)

I tried these steps on the 3430SDP but could'nt hit retention.
What is the 4th patch mentioned above which Paul is yet to send and
how does not having it prevent retention?

> 
> Test:
> 1. Apply dependency patches and workaround set on top of them
> 
> 2. Enable disabling/enabling of gpio2-6 and uart clocks on idle:
>    $ echo 1 > /sys/power/clocks_off_while_idle
> 
> 3. Try out static suspend:
>    $ echo mem > /sys/power/state
>    Wake up from suspend by entering character to serial console. This
>    should print out:
>    "Successfully put all powerdomains to target state"
> 
> 4. Try out dynamic sleep:
>    $ echo 1 > /sys/power/sleep_while_idle
>    On Omap3430 SDP board VCORE_EN led can be used as an indicator. If
>    it starts to blink after a while then Omap enters retention on
>    idle. To make this work also display needs to be blanked.
> 
> -- 
> Jouni Högander
> 
> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux