Linux USB Users

• Thread Index

• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: Making qcserial more flexible
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/4] usb gadget: Configure endpoint according to gadget speed.
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• Re: usb sound issue ...
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: suspending USB keyboards
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Dipen Patel <dipen.patel@xxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• Re: [PATCH] USB: ehci-omap: fix compile failure(v1)
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] drivers: usb: otg: add device tree support to otg library
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v3] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Dipen Patel <dipen.patel@xxxxxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH 7/13] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Logitech USB keyboard arbitrarily gets unresponsive
  • From: Paul Menzel <paulepanter@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] USB: ehci-omap: fix compile failure
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH 7/13] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH] USB: ehci-omap: fix compile failure(v1)
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• usb3 writes fail with transcend rdf8
  • From: Sami Farin <hvtaifwkbgefbaei@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Dipen Patel <dipen.patel@xxxxxxxxxxxxxx>
• Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: usb sound issue ...
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: Problems with the Nikon D800 and USB3
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 1/3 v2] USB: ohci-exynos: Add support for device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 2/3 v2] USB: ehci-s5p: Add support for device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: VIKAS SAJJAN C <vikas.sajjan@xxxxxxxxxxx>
• Re: [PATCH v.2] usb: host: tegra: pass correct pointer in ehci_setup()
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH net-next 3/8] net: usb: Use eth_random_addr
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH net-next 7/8] usb: Use eth_random_addr
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH -next] USB: ehci-omap: fix compile failure
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH -next] USB: ehci-omap: fix compile failure
  • From: Ming Lei <ming.lei@xxxxxxxxxxxxx>
• [PATCH v3] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: usb sound issue ...
  • From: "Dr. Ing. Dieter Jurzitza" <dieter.jurzitza@xxxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• Problems with the Nikon D800 and USB3
  • From: Richard Adams <richard@xxxxxxxxxxxx>
• Re: Issues with Nikon D800 cameras & USB3
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [patch -next] smsc95xx: signedness bug in get_regs()
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Dipen Patel <dipen.patel@xxxxxxxxxxxxxx>
• [PATCH v.2] usb: host: tegra: pass correct pointer in ehci_setup()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: pass correct pointer in ehci_setup()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Jan Ceuleers <jan.ceuleers@xxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: [PATCH v4 2/4] usb gadget: Configure endpoint according to gadget speed.
  • From: Rajaram R <rajaram.officemail@xxxxxxxxx>
• [PATCH] net: qmi_wwan: add ZTE MF821D
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: g_serial and cdc_acm communications
  • From: Dipen Patel <dipen.patel@xxxxxxxxxxxxxx>
• [PATCH] USB: option: add ZTE MF821D
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v3 3/3] usb: musb: dsps: enable phy control for am335x
  • From: Damodar Santhapuri <damodar.santhapuri@xxxxxx>
• [PATCH v3 2/3] usb: musb: dsps: add phy control logic to glue
  • From: Damodar Santhapuri <damodar.santhapuri@xxxxxx>
• [PATCH v3 1/3] arm: omap: hwmod: add new memory resource for usb phy control
  • From: Damodar Santhapuri <damodar.santhapuri@xxxxxx>
• [PATCH 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 11/11] arm/dts: am33xx: add phy phandle to usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 10/11] usb: musb: dsps: get the PHY using phandle api
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 07/11] usb: otg: nop: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 02/11] usb: musb: kill global and static for multi instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 00/11] usb: musb: adding multi instance support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 01/11] usb: musb: add musb->id to identify core instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 03/11] usb: musb: am335x: add support for dual instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 05/11] usb: musb: dsps: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 09/11] usb: musb: dsps: remove explicit NOP device creation
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] usb: host: tegra: pass correct pointer in ehci_setup()
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: NULL pointer dereference in at91_udc on start of connection
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• RE: [PATCH v2 1/3] arm: omap: hwmod: add new memory resource for usb phy control
  • From: "Santhapuri, Damodar" <damodar.santhapuri@xxxxxx>
• [PATCH] usb: host: tegra: pass correct pointer in ehci_setup()
  • From: Laxman Dewangan <ldewangan@xxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 11/12] USB: chipidea: re-order irq handling to avoid unhandled irq
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 10/12] USB: chipidea: add set_vbus_power support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 09/12] USB: chipidea: add -DDEBUG if CONFIG_USB_CHIPIDEA_DEBUG
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 08/12] USB: chipidea: convert to use devm_request_irq
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 02/12] USB: chipidea: delay 2ms before read ID status at probe time
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 07/12] USB: chipidea: add vbus detect for udc
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 06/12] USB: mxs-phy: add basic otg support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 05/12] USB: chipidea: don't let probe fail if otg controller start one role failed
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 04/12] USB: chipidea: clear gadget struct at udc_start fail path
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 03/12] USB: chipidea: move OTGSC_IDIS clearing from ci_role_work to irq handler
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 01/12] USB: chipidea: imx: add pinctrl support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH 00/12] chipidea/imx: add otg support and some bug fix
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: usb sound issue ...
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH 1/2 v2] USB: dwc3-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/2 v2] USB: host: Add Device tree support for dwc3-exynos
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 2/2 v2] USB: dwc3-exynos: Add vbus setup function to the exynos dwc3 glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 3/3 v2] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/3 v2] USB: ohci-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 2/3 v2] USB: ehci-s5p: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/3 v2] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v2] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• [PATCH] mceusb: Add Twisted Melon USB IDs
  • From: Mark Lord <mlord@xxxxxxxxx>
• Re: Can anyone tell me whether there is specific (or general) Linux driver support for these Digi USB-Serial Converters ?
  • From: simon@xxxxxxxxxxxxx
• Re: Can anyone tell me whether there is specific (or general) Linux driver support for these Digi USB-Serial Converters ?
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Can anyone tell me whether there is specific (or general) Linux driver support for these Digi USB-Serial Converters ?
  • From: Christopher Harvey <charvey@xxxxxxxxxx>
• Can anyone tell me whether there is specific (or general) Linux driver support for these Digi USB-Serial Converters ?
  • From: Richard McLean <rmcl2303@xxxxxxxxxxxxxx>
• Re: [PATCH RESEND 3/3] usb: storage: update usb devices for write cache quirk in quirk list.
  • From: Amit Sahrawat <amit.sahrawat83@xxxxxxxxx>
• [RFC/PATCH v2] usb: dwc3: Introduce OTG driver for dwc3
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• Re: Logitech USB keyboard arbitrarily gets unresponsive
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] USB: serial: Changes to conform with checkpatch.
  • From: "Michal Nazarewicz" <mina86@xxxxxxxxxx>
• [PATCH 25/25] USB: EHCI: resolve some unlikely races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 24/25] USB: EHCI: fix up locking
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 23/25] USB: EHCI: simplify isochronous scanning
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 22/25] USB: EHCI: use hrtimer for the I/O watchdog
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 21/25] USB: EHCI: always scan each interrupt QH
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 20/25] USB: EHCI: don't lose events during a scan
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 19/25] USB: EHCI: use hrtimer for unlinking empty async QHs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 18/25] USB: EHCI: unlink multiple async QHs together
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 17/25] USB: EHCI: use hrtimer for the IAA watchdog
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 16/25] USB: EHCI: don't refcount iso_stream structures
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 15/25] USB: EHCI: use hrtimer for (s)iTD deallocation
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 14/25] USB: EHCI: use hrtimer for controller death
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/25] USB: EHCI: use hrtimer for interrupt QH unlink
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/25] USB: EHCI: use hrtimer for async schedule
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 11/25] USB: EHCI: remove PS3 status polling
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 10/25] USB: EHCI: return void instead of 0
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 9/25] USB: EHCI: use hrtimer for the periodic schedule
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 8/25] USB: EHCI: introduce high-res timer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 7/25] USB: EHCI: add new root-hub state: STOPPING
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 6/25] USB: EHCI: add pointer to end of async-unlink list
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/25] USB: EHCI: rename "reclaim"
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/25] USB: EHCI: add symbolic constants for QHs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/25] USB: EHCI: don't refcount QHs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/25] USB: EHCI: remove unneeded suspend/resume code
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/25] USB: EHCI: initialize data before resetting hardware
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/25] USB: EHCI changes
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/6] USB: serial: Changes to conform with checkpatch.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: host: xhci: Compliance Mode port recovery
  • From: "'Greg KH'" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -v2] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: "Henrik Rydberg" <rydberg@xxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: [PATCH] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt Causey <matt.causey@xxxxxxxxx>
• [PATCH 1/6] USB: serial: Removed space before tabs.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 2/6] USB: serial: Fix spacing around conditional.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 3/6] USB: serial: Fixed space around equals.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 4/6] USB: serial: Fixed space near open parenthesis.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 5/6] USB: serial: Removed trailing whitespace.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 6/6] USB: serial: Removed unrequired parentheses.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [PATCH 0/6] USB: serial: Changes to conform with checkpatch.
  • From: Ben Minerds <puzzleduck@xxxxxxxxx>
• [GIT PATCH] USB bug fixes for 3.5-rc6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V8 1/8] usb: make usb port a real device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH v2 1/3] arm: omap: hwmod: add new memory resource for usb phy control
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] usb: twl6030-usb: variable otg not declared in twl6030_usbotg_irq() in linux-next
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [RFC/PATCH] usb: dwc3: Introduce OTG driver for dwc3
  • From: Ido Shayevitz <idos@xxxxxxxxxxxxxx>
• Re: [PATCH V8 1/8] usb: make usb port a real device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb sound issue - any ideas?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 7/7] USB: Add a sysfs file to show LTM capabilities.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/7] USB: Enable Latency Tolerance Messaging (LTM).
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/7] xhci: Export Latency Tolerance Messaging capabilities.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 4/7] USB: Remove unused LPM variable.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/7] USB: Fix LPM disable count mismatch on driver unbind.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/7] USB: Disable LPM while the device is unconfigured.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [Pull Request] LPM fixes and LTM patches for 3.6
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/7] USB: Fix LPM disable/enable during device reset.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v2 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH v2 2/3] usb: musb: dsps: add phy control logic to glue
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• [PATCH v2 3/3] usb: musb: dsps: enable phy control for am335x
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• [PATCH v2 1/3] arm: omap: hwmod: add new memory resource for usb phy control
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• [RFT 2/2] net: qmi_wwan: add ZTE MF821D
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFT 1/2] USB: option: add ZTE MF821D
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Logitech USB keyboard arbitrarily gets unresponsive
  • From: Paul Menzel <paulepanter@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v4 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• RE: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• [PATCH v4 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• [patch -next] smsc95xx: signedness bug in get_regs()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: Logitech HD Webcam C525 does not work when connected to USB 2 port, works on USB 3
  • From: Heinz Diehl <htd@xxxxxxxxxxxxxxxxx>
• Re: usb sound issue - any ideas?
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• [PATCH v10] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: usb hub is n't recognised during boot up(sometimes)
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• [PATCH] usb/host/ehci-hub: Fix the issue EG20T USB host controller has long resuming time, when pen drive is attached.
  • From: Tomoya MORINAGA <tomoya.rohm@xxxxxxxxx>
• [PATCH -v2] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• Re: [PATCH] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Marcel Holtmann <marcel@xxxxxxxxxxxx>
• Re: [PATCH] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: add USB_VENDOR_AND_INTERFACE_INFO() macro
  • From: Gustavo Padovan <gustavo@xxxxxxxxxxx>
• RE: usb hub is n't recognised during boot up(sometimes)
  • From: Sadasivan Shaiju <sshaiju@xxxxxxxxxx>
• Re: [PATCH v3 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: usb sound issue - any ideas?
  • From: "Dr. Ing. Dieter Jurzitza" <dieter.jurzitza@xxxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Matt <matt.causey@xxxxxxxxx>
• [PATCH v3 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• RE: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Scan Subscription <scan-subscription@xxxxxxxxxxxx>
• RE: NULL pointer dereference in at91_udc on start of connection
  • From: "Mario Jorge Isidoro" <Mario.Isidoro@xxxxxxxxx>
• [PATCH] USB: remove 8 bytes of padding from usb_host_interface on 64 bit builds
  • From: Richard Kennedy <richard@xxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: NULL pointer dereference in at91_udc on start of connection
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH] usb: twl6030-usb: variable otg not declared in twl6030_usbotg_irq() in linux-next
  • From: Gerard Snitselaar <dev@xxxxxxxxxxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: NULL pointer dereference in at91_udc on start of connection
  • From: "Mario Jorge Isidoro" <Mario.Isidoro@xxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx" <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: twl6030-usb: variable otg not declared in twl6030_usbotg_irq() in linux-next
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC v2] USB: Add a sysfs file to show LTM capabilities.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: How to get drivers/usb/musb/omap2430.c built into the kernel, not as module? (bug in kconfig?)
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: "usb: dwc3: resume phy during gadget initialization on recent cores" breaks phy suspend
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• [PATCH] USB: ehci-fsl: Update ifdef check to work on 64-bit ppc
  • From: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
• [RFC v2] USB: Add a sysfs file to show LTM capabilities.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] usb: dwc3: Do not handle xfercomplete if EP is already stopped
  • From: Pratyush Anand <pratyush.anand@xxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• RE: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "Santhapuri, Damodar" <x0132156@xxxxxx>
• Re: Mac USB 3.0 Linux support Fwd: [tova-technical-support] Request 2012/06/14/00000005 from Nancy Blum (SN: 20051 )
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: NULL pointer dereference in at91_udc on start of connection
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• RE: [RFC 0/2] USB gadget - configfs
  • From: Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx>
• Re: [PATCH v1 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH v1 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 08/11] arm/dts: Add twl4030-usb data
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH] usb: twl6030-usb: variable otg not declared in twl6030_usbotg_irq() in linux-next
  • From: Gerard Snitselaar <dev@xxxxxxxxxxxxxx>
• Re: [PATCH v1 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v1 08/11] arm/dts: Add twl4030-usb data
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v1 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 6/7 v2] usb: gadget: mv_udc: fix hang when shutdown
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 7/7 v2] usb: gadget: mv_udc: fix boot up hang
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 4/7 v2] usb: gadget: mv_udc: enable stream mode
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 5/7 v2] usb: gadget: mv_udc: add iso support
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 2/7 v2] usb: gadget: mv_udc: remove unused code
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 3/7 v2] usb: gadget: mv_udc: avoid sleeping on spinlock
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 0/7 v2] usb: gadget: mv_udc: bug fix and feature add
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• [PATCH 1/7 v2] usb: gadget: mv_udc: reduce the delay interval
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: Mac USB 3.0 Linux support Fwd: [tova-technical-support] Request 2012/06/14/00000005 from Nancy Blum (SN: 20051 )
  • From: Ian Osgood <iano@xxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] usb: gadget: udc-core: Race between disconnect/unbind and setup
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Race between disconnect/unbind and setup
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: Mac USB 3.0 Linux support Fwd: [tova-technical-support] Request 2012/06/14/00000005 from Nancy Blum (SN: 20051 )
  • From: Peter Stuge <peter@xxxxxxxx>
• Re: Mac USB 3.0 Linux support Fwd: [tova-technical-support] Request 2012/06/14/00000005 from Nancy Blum (SN: 20051 )
  • From: Ian Osgood <iano@xxxxxxxxxxxxx>
• Re: [PATCH] maintainers: change of mail
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH] maintainers: change of mail
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• [PATCH 2/2 ver. 3] EHCI: centralize controller initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 ver. 2] EHCI: centralize controller initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2 ver. 2] EHCI: centralize controller initialization
  • From: Greg KH <greg@xxxxxxxxx>
• [PATCH] usb: gadget: udc-core: Race between disconnect/unbind and setup
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH 2/2 ver. 2] EHCI: centralize controller initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] USB: maintainers: change of mail
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH RESEND] usb: gadget: composite: parse dt values
  • From: Alexandre Pereira da Silva <aletes.xgr@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• Re: [PATCH 2/2 ver. 2] EHCI: centralize controller initialization
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH v2 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: usbutils 006 release
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] PCI: EHCI: fix crash during suspend on ASUS computers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v1] usb: host: Fix possible kernel crash
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB: panic with printk
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Race between disconnect/unbind and setup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: musb: implement (un)map_urb_for_dma hooks
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• Re: [PATCH v2 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Clemens Ladisch <clemens@xxxxxxxxxx>
• [PATCH] usb/hcd: Ensure scatter-gather is not used for isoc transfers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 1/3] arm: omap: hwmod: add new memory resource for usb phy cont
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• [PATCH 2/3] usb: musb: dsps: add phy control logic to glue
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• [PATCH 3/3] usb: musb: dsps: enable phy control for am335x
  • From: Damodar Santhapuri <x0132156@xxxxxx>
• USB: panic with printk
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: [PATCH 1/7] usb: gadget: mv_udc: reduce the delay time
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: usb sound issue - any ideas?
  • From: "dieter.jurzitza@xxxxxxxxxxx" <dieter.jurzitza@xxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v1] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: usb sound issue - any ideas?
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v2] usb: host: Fix possible kernel crash
  • From: Venu Byravarasu <vbyravarasu@xxxxxxxxxx>
• Re: Infinite looping in omap2430.c USB driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [RFC PATCH 1/1] usb: phy: move usb_otg_state from struct usb_phy to struct usb_otg
  • From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Oliver Neukum <oneukum@xxxxxxx>
• [PATCH] drivers: usb: otg: fix build break in twl6030-usb.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [GIT PULL] usb: phy: patches for v3.6
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] usb: phy: patches for v3.6
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• [PATCH] usb: renesas_usbhs: use dmaengine helper functions
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: usb sound issue - any ideas?
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [RFC 5/7] xhci: Export Latency Tolerance Messaging capabilities.
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• RE: USB: option: Add MEDIATEK product ids
  • From: Gaosen Zhang (张高森) <gaosen.zhang@xxxxxxxxxxxx>
• RE: [PATCH 1/7] usb: gadget: mv_udc: reduce the delay time
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• RE: [PATCH 5/7] usb: gadget: mv_udc: add iso support
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• RE: [PATCH 2/7] usb: gadget: mv_udc: remove unused variable
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: [PATCH v2 1/4] usb: chipidea: pci: make platformdata static
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Race between disconnect/unbind and setup
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH 1/2] usb: gadget: composite: Race between disconnect/unbind and setup
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH/RFC 2/2] usb: gadget: u_ether: Don't change endpoint status in eth_stop()
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• [PATCH 1/2] usb: gadget: composite: Race between disconnect/unbind and setup
  • From: Kevin Cernekee <cernekee@xxxxxxxxx>
• Re: [PATCH v2 1/4] usb: chipidea: pci: make platformdata static
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• Re: [PATCH 3/4] usbdevfs: Use scatter-gather lists for large bulk transfers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] usb: chipidea: pci: make platformdata static
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH V8 7/8] usb: return error when fail to get usb device descriptor in the usb_get_configuration()
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 6/8] USB/ACPI: Add usb port's acpi power control in the xhci PORT_POWER feature request process.
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 8/8] usb : Add usb port's power control attributes
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 4/8] usb/acpi: add check for the connect type of usb port
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 5/8] xhci: Add clear PORT_POWER feature process in the xhci_hub_control()
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 3/8] usb/acpi : rebinding usb with acpi since usb port being made a real device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 2/8] usb: move children to struct usb_port
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH V8 1/8] usb: make usb port a real device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• usb sound issue - any ideas?
  • From: "Dr. Ing. Dieter Jurzitza" <dieter.jurzitza@xxxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: "Oleksij Rempel (fishor)" <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: "Oleksij Rempel (fishor)" <bug-track@xxxxxxxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• [PATCH v2 1/1] Input: xpad - Handle all variations of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• [PATCH RESEND 0/3] scsi: fix internal write cache issue on usb hdd.
  • From: Namjae Jeon <linkinjeon@xxxxxxxxx>
• [PATCH RESEND 3/3] usb: storage: update usb devices for write cache quirk in quirk list.
  • From: Namjae Jeon <linkinjeon@xxxxxxxxx>
• [PATCH RESEND 1/3] scsi: set to WCE if usb cache quirk is present.
  • From: Namjae Jeon <linkinjeon@xxxxxxxxx>
• [PATCH RESEND 2/3] usb: storage: add support for write cache quirk
  • From: Namjae Jeon <linkinjeon@xxxxxxxxx>
• Re: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: Jonathan Nieder <jrnieder@xxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usbdevfs: Use scatter-gather lists for large bulk transfers
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] usbdevfs: Use scatter-gather lists for large bulk transfers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• "usb: dwc3: resume phy during gadget initialization on recent cores" breaks phy suspend
  • From: Paul Zimmerman <Paul.Zimmerman@xxxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Bug#677472: [3.1->3.2 regression] Immediate wake on suspend, associated with OHCI on MCP51
  • From: "Octavio Alvarez" <alvarezp@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH V7 9/9] usb : Add usb port's power control attributes
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• [PATCH v9 REBASE 9/9] usb: chipidea: add imx platform driver
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 8/9] usb: otg: add basic mxs phy driver support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 6/9] USB: notify phy when root hub port connect change
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 7/9] usb: chipidea: permit driver bindings pass phy pointer
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 5/9] usb: otg: add notify_connect/notify_disconnect callback
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 4/9] usb: chipidea: select USB_EHCI_ROOT_HUB_TT in USB_CHIPIDEA_HOST of Kconfig
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 3/9] USB: Chipidea: add ci13xxx device id management
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 2/9] USB: Chipidea: add unified ci13xxx_{add,remove}_device for platform drivers
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 1/9] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v9 REBASE 0/9] add imx usb driver based on Greg next tree
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v8 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] usb: gadget/uvc: Add support for 'USB_GADGET_DELAYED_STATUS' response for a set_intf(alt-set 1) command
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Oleksij Rempel <bug-track@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb/hcd: Ensure scatter-gather is not used for isoc transfers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/4] usbdevfs: Use scatter-gather lists for large bulk transfers
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 1/7] xhci: Fix LPM disable/enable during device reset.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Infinite looping in omap2430.c USB driver
  • From: NeilBrown <neilb@xxxxxxx>
• infos about device ZTE MF821D 2G,3G,4G/LTE usb-modem/networkcard
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• usbutils 006 release
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] lsusb: Fix LTM capabilities reporting.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] lsusb: Show USB 3.0 U1, U2, and LTM status.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] arch/tile: provide kernel support for the tilegx USB shim
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH V7 9/9] usb : Add usb port's power control attributes
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/9] usb: make usb port a real device
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: config : disable the usb host configuration in omap2plus_defconfig
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v8 06/14] USB: Chipidea: rename struct ci13xxx variables from udc to ci
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: NULL pointer dereference in at91_udc on start of connection
  • From: "Mario Jorge Isidoro" <Mario.Isidoro@xxxxxxxxx>
• Re: [PATCH 1/3] arch/tile: provide kernel support for the tilegx USB shim
  • From: Chris Metcalf <cmetcalf@xxxxxxxxxx>
• Re: [PATCH 4/4] usb/hcd: Ensure scatter-gather is not used for isoc transfers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: linux-next: Tree for July 6 (usb/otg)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
• Re: [PATCH 3/4] usbdevfs: Use scatter-gather lists for large bulk transfers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] isp1362-hcd.c: usb message always saved in case of underrun
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 5/7] usb: gadget: mv_udc: add iso support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/3] arch/tile: provide kernel support for the tilegx USB shim
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 1/7] usb: gadget: mv_udc: reduce the delay time
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/7] usb: gadget: mv_udc: remove unused variable
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: USB: option: Add MEDIATEK product ids
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB: option: Add MEDIATEK product ids
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 3/3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/2] USB: dwc3-exynos: Add vbus setup function to the exynos dwc3 glue layer
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 0/1] Input: xpad - Add a variation of Mad Catz Beat Pad
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/1] Input: xpad - Add a variation of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• How to get drivers/usb/musb/omap2430.c built into the kernel, not as module? (bug in kconfig?)
  • From: Ruslan Bilovol <ruslan.bilovol@xxxxxx>
• [PATCH 0/1] Input: xpad - Add a variation of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• [PATCH 1/1] Input: xpad - Add a variation of Mad Catz Beat Pad
  • From: Yuri Khan <yurivkhan@xxxxxxxxx>
• Re: [RFC 1/7] xhci: Fix LPM disable/enable during device reset.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: NULL pointer dereference in at91_udc on start of connection
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 4/7] USB: Remove unused LPM variable.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC 4/7] USB: Remove unused LPM variable.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: gadget: use %pm to print mac addresses
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 3/7] USB: Fix LPM disable count mismatch on driver unbind.
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] USB: ohci-exynos: Add support for device tree
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• Re: [PATCH V7 8/9] usb: return error when fail to get usb device descriptor in the usb_get_configuration()
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: config : disable the usb host configuration in omap2plus_defconfig
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 2/2] USB: dwc3-exynos: Add vbus setup function to the exynos dwc3 glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/2] USB: dwc3-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/2] USB: host: Add Device tree support for dwc3-exynos
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH] From 2.6.39-rc1 onward, the Logitech Quickcam Fusion webcam (046d:08c1) stops
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 3/3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 2/3] USB: ehci-s5p: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/3] USB: ohci-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/3] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>