On Fri, Jul 13, 2012 at 10:17:14 -0400, Alan Stern wrote: > On Fri, 13 Jul 2012, Sami Farin wrote: > > > transcend rdf8 reader works in usb2 port, but some SD cards do not work in > > usb3 port. 3.5.0-g918227bb1 kernel, Asus P8Z68-V PRO GEN3 rev 3402. > > > > If someone knows a working (in Linux) SD card reader for usb3, please tell me. > > > > cat: write error: Input/output error > > Please post a usbmon trace showing the error (see > Documentation/usb/usbmon.txt). > > Alan Stern I uploaded it here, 534 KB https://docs.google.com/open?id=0B_EMXtsx7o56bEtobmJwYi1TaWc I did this: $ head -c1m /dev/urandom > ur.bin $ head -c10m /dev/urandom > ur2.bin $ head -c100m /dev/urandom > ur3.bin $ l total 11280 drwxrwx--- 3 safari safari 4096 2012-07-13 17:55:10.000000000 +0300 . drwxrwxrwx 20 root root 4096 2012-07-12 21:15:01.517680424 +0300 .. drwxrwx--- 3 safari safari 4096 2012-07-13 13:11:28.000000000 +0300 dcim -rw-rw---- 1 safari safari 512 2012-07-13 13:11:28.000000000 +0300 nikon001.dsc -rw-rw---- 1 safari safari 10485760 2012-07-13 17:55:01.000000000 +0300 ur2.bin -rw-rw---- 1 safari safari 1048576 2012-07-13 17:54:47.000000000 +0300 ur.bin (then the filesystem got corrupted) [75506.894120] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 1 [75506.894243] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 2 [75506.894369] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 3 [75506.894493] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 4 [75506.894618] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 5 [75506.894742] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 6 [75506.894868] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 7 [75506.894995] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 8 [75506.895117] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 9 [75506.895242] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 10 [75506.895368] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 11 [75506.895493] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 12 [75506.895617] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 13 [75506.895742] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 14 [75506.895866] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 15 [75506.895992] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 16 [75506.896118] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 17 [75506.896241] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 18 [75506.896366] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 19 [75506.896491] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 20 [75506.896616] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 21 [75506.896741] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 22 [75506.896866] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 23 [75506.896991] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 24 [75506.897117] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 25 [75506.897241] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 26 [75506.897365] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 27 [75506.897491] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 28 [75506.897615] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 29 [75506.897740] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 30 [75506.897865] ehci_hcd 0000:00:1d.0: detected XactErr len 0/31 retry 31 [75506.897991] ehci_hcd 0000:00:1d.0: devpath 1.5.3 ep2out 3strikes [75506.909241] hub 2-1.5:1.0: logical disconnect on port 3 [75506.909377] hub 2-1.5:1.0: state 7 ports 4 chg 0008 evt 0000 [75506.909609] hub 2-1.5:1.0: port 3, status 0100, change 0001, 12 Mb/s [75506.909612] usb 2-1.5.3: USB disconnect, device number 12 [75506.909614] usb 2-1.5.3: unregistering device [75506.909615] usb 2-1.5.3: unregistering interface 2-1.5.3:1.0 [75506.925548] usb 2-1.5.3: usb_disable_device nuking all URBs [75507.029888] hub 2-1.5:1.0: debounce: port 3: total 100ms stable 100ms status 0x100 [75548.741551] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [75548.741577] hub 4-0:1.0: port 2, status 0203, change 0001, 5.0 Gb/s [75548.845356] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x203 [75548.950897] usb 4-2: new SuperSpeed USB device number 9 using xhci_hcd [75548.962611] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75548.963431] usb 4-2: skipped 1 descriptor after endpoint [75548.963435] usb 4-2: skipped 1 descriptor after endpoint [75548.963723] usb 4-2: default language 0x0409 [75548.964704] usb 4-2: udev 9, busnum 4, minor = 392 [75548.964708] usb 4-2: New USB device found, idVendor=8564, idProduct=4000 [75548.964711] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [75548.964714] usb 4-2: Product: GL3220 [75548.964716] usb 4-2: Manufacturer: Genesys [75548.964719] usb 4-2: SerialNumber: 000001272 [75548.964890] usb 4-2: usb_probe_device [75548.964892] usb 4-2: configuration #1 chosen from 1 choice [75548.965519] usb 4-2: Successful Endpoint Configure command [75548.965779] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [75548.965889] usb-storage 4-2:1.0: usb_probe_interface [75548.965892] usb-storage 4-2:1.0: usb_probe_interface - got id [75548.965935] scsi18 : usb-storage 4-2:1.0 [75549.966004] scsi 18:0:0:0: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75549.966491] scsi 18:0:0:1: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75549.966931] scsi 18:0:0:2: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75549.968175] sd 18:0:0:0: Attached scsi generic sg4 type 0 [75549.969153] sd 18:0:0:0: [sdd] Attached SCSI removable disk [75549.969274] sd 18:0:0:1: Attached scsi generic sg5 type 0 [75549.970229] sd 18:0:0:1: [sdf] Attached SCSI removable disk [75549.971421] sd 18:0:0:2: Attached scsi generic sg6 type 0 [75549.975816] sd 18:0:0:2: [sdg] Attached SCSI removable disk [75605.698574] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [75605.698608] hub 4-0:1.0: warm reset port 2 [75605.748689] hub 4-0:1.0: port 2, status 02c0, change 0001, 5.0 Gb/s [75605.748695] usb 4-2: USB disconnect, device number 9 [75605.748698] usb 4-2: unregistering device [75605.748701] usb 4-2: unregistering interface 4-2:1.0 [75605.763180] usb 4-2: usb_disable_device nuking all URBs [75605.763835] usb 4-2: Successful Endpoint Configure command [75605.867548] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x2a0 [75605.867555] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [75615.431933] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0004 [75615.431969] hub 4-0:1.0: port 2, status 0203, change 0001, 5.0 Gb/s [75615.535423] hub 4-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x203 [75615.640954] usb 4-2: new SuperSpeed USB device number 10 using xhci_hcd [75615.652688] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75615.653517] usb 4-2: skipped 1 descriptor after endpoint [75615.653520] usb 4-2: skipped 1 descriptor after endpoint [75615.653807] usb 4-2: default language 0x0409 [75615.654823] usb 4-2: udev 10, busnum 4, minor = 393 [75615.654827] usb 4-2: New USB device found, idVendor=8564, idProduct=4000 [75615.654830] usb 4-2: New USB device strings: Mfr=3, Product=4, SerialNumber=5 [75615.654833] usb 4-2: Product: GL3220 [75615.654836] usb 4-2: Manufacturer: Genesys [75615.654838] usb 4-2: SerialNumber: 000001272 [75615.657298] usb 4-2: usb_probe_device [75615.657301] usb 4-2: configuration #1 chosen from 1 choice [75615.657921] usb 4-2: Successful Endpoint Configure command [75615.658163] usb 4-2: adding 4-2:1.0 (config #1, interface 0) [75615.658242] usb-storage 4-2:1.0: usb_probe_interface [75615.658246] usb-storage 4-2:1.0: usb_probe_interface - got id [75615.658306] scsi19 : usb-storage 4-2:1.0 [75616.659085] scsi 19:0:0:0: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75616.659544] scsi 19:0:0:1: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75616.659992] scsi 19:0:0:2: Direct-Access Generic STORAGE DEVICE TS07 PQ: 0 ANSI: 0 [75616.660951] sd 19:0:0:0: Attached scsi generic sg4 type 0 [75616.661541] sd 19:0:0:1: Attached scsi generic sg5 type 0 [75616.662583] sd 19:0:0:0: [sdd] Attached SCSI removable disk [75616.662829] sd 19:0:0:2: Attached scsi generic sg6 type 0 [75616.663220] sd 19:0:0:1: [sdf] Attached SCSI removable disk [75616.665785] sd 19:0:0:2: [sdg] Attached SCSI removable disk [75627.449498] sd 19:0:0:1: [sdf] 15759360 512-byte logical blocks: (8.06 GB/7.51 GiB) [75627.450842] sd 19:0:0:1: [sdf] No Caching mode page present [75627.450845] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75627.452752] sd 19:0:0:1: [sdf] No Caching mode page present [75627.452756] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75627.453404] sdf: sdf1 [75649.177832] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75649.190035] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75649.190937] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75649.190940] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75649.191574] usb 4-2: Successful Endpoint Configure command [75649.545392] sd 19:0:0:1: [sdf] Media Changed [75649.545397] sd 19:0:0:1: [sdf] [75649.545399] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75649.545402] sd 19:0:0:1: [sdf] [75649.545404] Sense Key : Unit Attention [current] [75649.545408] sd 19:0:0:1: [sdf] [75649.545411] Add. Sense: Not ready to ready change, medium may have changed [75649.545421] sd 19:0:0:1: [sdf] CDB: [75649.545422] Write(10): 2a 00 00 00 98 38 00 00 f0 00 [75649.545427] end_request: I/O error, dev sdf, sector 38968 [75649.659387] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75649.671573] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75649.672423] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75649.672427] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75649.673060] usb 4-2: Successful Endpoint Configure command [75650.097350] sd 19:0:0:1: [sdf] Media Changed [75650.097355] sd 19:0:0:1: [sdf] [75650.097358] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75650.097360] sd 19:0:0:1: [sdf] [75650.097362] Sense Key : Unit Attention [current] [75650.097366] sd 19:0:0:1: [sdf] [75650.097377] Add. Sense: Not ready to ready change, medium may have changed [75650.097378] sd 19:0:0:1: [sdf] CDB: [75650.097379] Write(10): 2a 00 00 00 99 28 00 00 f0 00 [75650.097384] end_request: I/O error, dev sdf, sector 39208 [75650.100887] sd 19:0:0:1: [sdf] No Caching mode page present [75650.100891] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75659.117459] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75659.129646] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75659.130534] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75659.130538] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75659.131169] usb 4-2: Successful Endpoint Configure command [75659.551516] sd 19:0:0:1: [sdf] Media Changed [75659.551528] sd 19:0:0:1: [sdf] [75659.551529] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75659.551530] sd 19:0:0:1: [sdf] [75659.551532] Sense Key : Unit Attention [current] [75659.551534] sd 19:0:0:1: [sdf] [75659.551535] Add. Sense: Not ready to ready change, medium may have changed [75659.551537] sd 19:0:0:1: [sdf] CDB: [75659.551538] Write(10): 2a 00 00 00 a0 38 00 00 f0 00 [75659.551543] end_request: I/O error, dev sdf, sector 41016 [75659.662948] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75659.675144] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75659.676063] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75659.676067] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75659.676706] usb 4-2: Successful Endpoint Configure command [75660.075392] sd 19:0:0:1: [sdf] Media Changed [75660.075397] sd 19:0:0:1: [sdf] [75660.075400] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75660.075402] sd 19:0:0:1: [sdf] [75660.075404] Sense Key : Unit Attention [current] [75660.075408] sd 19:0:0:1: [sdf] [75660.075418] Add. Sense: Not ready to ready change, medium may have changed [75660.075420] sd 19:0:0:1: [sdf] CDB: [75660.075420] Write(10): 2a 00 00 00 a1 28 00 00 f0 00 [75660.075425] end_request: I/O error, dev sdf, sector 41256 [75660.353116] sd 19:0:0:1: [sdf] No Caching mode page present [75660.353119] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75669.097035] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75669.109222] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75669.110126] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75669.110129] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75669.110763] usb 4-2: Successful Endpoint Configure command [75669.506415] sd 19:0:0:1: [sdf] Media Changed [75669.506420] sd 19:0:0:1: [sdf] [75669.506422] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75669.506432] sd 19:0:0:1: [sdf] [75669.506433] Sense Key : Unit Attention [current] [75669.506435] sd 19:0:0:1: [sdf] [75669.506437] Add. Sense: Not ready to ready change, medium may have changed [75669.506438] sd 19:0:0:1: [sdf] CDB: [75669.506439] Write(10): 2a 00 00 00 20 36 00 00 c9 00 [75669.506444] end_request: I/O error, dev sdf, sector 8246 [75669.506447] Buffer I/O error on device sdf1, logical block 54 [75669.506448] lost page write due to I/O error on sdf1 [75669.506450] Buffer I/O error on device sdf1, logical block 55 [75669.506451] lost page write due to I/O error on sdf1 [75669.506454] Buffer I/O error on device sdf1, logical block 56 [75669.506464] lost page write due to I/O error on sdf1 [75669.506470] Buffer I/O error on device sdf1, logical block 57 [75669.506472] lost page write due to I/O error on sdf1 [75669.506475] Buffer I/O error on device sdf1, logical block 58 [75669.506479] lost page write due to I/O error on sdf1 [75669.506482] Buffer I/O error on device sdf1, logical block 59 [75669.506483] lost page write due to I/O error on sdf1 [75669.506484] Buffer I/O error on device sdf1, logical block 60 [75669.506485] lost page write due to I/O error on sdf1 [75669.506486] Buffer I/O error on device sdf1, logical block 61 [75669.506487] lost page write due to I/O error on sdf1 [75669.506488] Buffer I/O error on device sdf1, logical block 62 [75669.506489] lost page write due to I/O error on sdf1 [75669.506490] Buffer I/O error on device sdf1, logical block 63 [75669.506491] lost page write due to I/O error on sdf1 [75669.622544] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75669.634723] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75669.635571] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75669.635573] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75669.636202] usb 4-2: Successful Endpoint Configure command [75670.147389] sd 19:0:0:1: [sdf] Media Changed [75670.147394] sd 19:0:0:1: [sdf] [75670.147397] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75670.147399] sd 19:0:0:1: [sdf] [75670.147401] Sense Key : Unit Attention [current] [75670.147406] sd 19:0:0:1: [sdf] [75670.147409] Add. Sense: Not ready to ready change, medium may have changed [75670.147418] sd 19:0:0:1: [sdf] CDB: [75670.147419] Write(10): 2a 00 00 01 81 88 00 00 f0 00 [75670.147424] end_request: I/O error, dev sdf, sector 98696 [75670.260942] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75670.273127] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75670.274020] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75670.274024] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75670.274659] usb 4-2: Successful Endpoint Configure command [75670.743454] sd 19:0:0:1: [sdf] Media Changed [75670.743459] sd 19:0:0:1: [sdf] [75670.743462] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75670.743464] sd 19:0:0:1: [sdf] [75670.743473] Sense Key : Unit Attention [current] [75670.743475] sd 19:0:0:1: [sdf] [75670.743477] Add. Sense: Not ready to ready change, medium may have changed [75670.743478] sd 19:0:0:1: [sdf] CDB: [75670.743480] Write(10): 2a 00 00 01 82 78 00 00 f0 00 [75670.743484] end_request: I/O error, dev sdf, sector 98936 [75670.881356] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75670.893527] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75670.894377] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75670.894380] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75670.895018] usb 4-2: Successful Endpoint Configure command [75671.363479] sd 19:0:0:1: [sdf] Media Changed [75671.363483] sd 19:0:0:1: [sdf] [75671.363486] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75671.363489] sd 19:0:0:1: [sdf] [75671.363490] Sense Key : Unit Attention [current] [75671.363507] sd 19:0:0:1: [sdf] [75671.363509] Add. Sense: Not ready to ready change, medium may have changed [75671.363510] sd 19:0:0:1: [sdf] CDB: [75671.363511] Write(10): 2a 00 00 01 83 68 00 00 f0 00 [75671.363516] end_request: I/O error, dev sdf, sector 99176 [75671.363561] FAT-fs (sdf1): unable to read inode block for updating (i_pos 491783) [75671.365101] sd 19:0:0:1: [sdf] No Caching mode page present [75671.365105] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75671.375288] sd 19:0:0:1: [sdf] No Caching mode page present [75671.375290] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75671.511758] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75671.523952] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75671.524845] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75671.524848] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75671.525489] usb 4-2: Successful Endpoint Configure command [75671.994314] sd 19:0:0:1: [sdf] Media Changed [75671.994320] sd 19:0:0:1: [sdf] [75671.994322] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75671.994331] sd 19:0:0:1: [sdf] [75671.994333] Sense Key : Unit Attention [current] [75671.994335] sd 19:0:0:1: [sdf] [75671.994336] Add. Sense: Not ready to ready change, medium may have changed [75671.994338] sd 19:0:0:1: [sdf] CDB: [75671.994339] Write(10): 2a 00 00 02 16 98 00 00 f0 00 [75671.994344] end_request: I/O error, dev sdf, sector 136856 [75672.135170] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75672.147338] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75672.148218] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75672.148220] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75672.148849] usb 4-2: Successful Endpoint Configure command [75672.621765] sd 19:0:0:1: [sdf] Media Changed [75672.621771] sd 19:0:0:1: [sdf] [75672.621773] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75672.621776] sd 19:0:0:1: [sdf] [75672.621778] Sense Key : Unit Attention [current] [75672.621782] sd 19:0:0:1: [sdf] [75672.621793] Add. Sense: Not ready to ready change, medium may have changed [75672.621794] sd 19:0:0:1: [sdf] CDB: [75672.621795] Write(10): 2a 00 00 02 90 38 00 00 f0 00 [75672.621800] end_request: I/O error, dev sdf, sector 167992 [75672.734608] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75672.746782] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75672.747673] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75672.747677] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75672.748313] usb 4-2: Successful Endpoint Configure command [75673.218553] sd 19:0:0:1: [sdf] Media Changed [75673.218559] sd 19:0:0:1: [sdf] [75673.218561] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75673.218564] sd 19:0:0:1: [sdf] [75673.218565] Sense Key : Unit Attention [current] [75673.218570] sd 19:0:0:1: [sdf] [75673.218573] Add. Sense: Not ready to ready change, medium may have changed [75673.218583] sd 19:0:0:1: [sdf] CDB: [75673.218583] Write(10): 2a 00 00 02 91 28 00 00 f0 00 [75673.218588] end_request: I/O error, dev sdf, sector 168232 [75673.222986] sd 19:0:0:1: [sdf] No Caching mode page present [75673.222988] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75673.337040] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75673.349231] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75673.350119] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75673.350123] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75673.350757] usb 4-2: Successful Endpoint Configure command [75673.817027] sd 19:0:0:1: [sdf] Media Changed [75673.817032] sd 19:0:0:1: [sdf] [75673.817034] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75673.817037] sd 19:0:0:1: [sdf] [75673.817039] Sense Key : Unit Attention [current] [75673.817043] sd 19:0:0:1: [sdf] [75673.817046] Add. Sense: Not ready to ready change, medium may have changed [75673.817055] sd 19:0:0:1: [sdf] CDB: [75673.817056] Write(10): 2a 00 00 03 d7 68 00 00 f0 00 [75673.817061] end_request: I/O error, dev sdf, sector 251752 [75673.951452] usb 4-2: reset SuperSpeed USB device number 10 using xhci_hcd [75673.963647] usb 4-2: Parent hub missing LPM exit latency info. Power management will be impacted. [75673.964531] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f2180 [75673.964533] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff88000f9f21c0 [75673.965162] usb 4-2: Successful Endpoint Configure command [75674.435882] sd 19:0:0:1: [sdf] Media Changed [75674.435884] sd 19:0:0:1: [sdf] [75674.435886] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [75674.435887] sd 19:0:0:1: [sdf] [75674.435888] Sense Key : Unit Attention [current] [75674.435890] sd 19:0:0:1: [sdf] [75674.435892] Add. Sense: Not ready to ready change, medium may have changed [75674.435893] sd 19:0:0:1: [sdf] CDB: [75674.435894] Write(10): 2a 00 00 03 d8 58 00 00 f0 00 [75674.435899] end_request: I/O error, dev sdf, sector 251992 [75674.437268] sd 19:0:0:1: [sdf] No Caching mode page present [75674.437272] sd 19:0:0:1: [sdf] Assuming drive cache: write through [75674.446498] sd 19:0:0:1: [sdf] No Caching mode page present [75674.446502] sd 19:0:0:1: [sdf] Assuming drive cache: write through -- Do what you love because life is too short for anything else. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
