set_vbus_power is used to enable or disable vbus power for usb host. Signed-off-by: Richard Zhao <richard.zhao@xxxxxxxxxxxxx> --- drivers/usb/chipidea/ci13xxx_imx.c | 39 +++++++++++++++++++++++++----------- drivers/usb/chipidea/host.c | 8 ++++++++ include/linux/usb/chipidea.h | 2 ++ 3 files changed, 37 insertions(+), 12 deletions(-) diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c index c94e30f..b3173d8 100644 --- a/drivers/usb/chipidea/ci13xxx_imx.c +++ b/drivers/usb/chipidea/ci13xxx_imx.c @@ -26,6 +26,8 @@ #define pdev_to_phy(pdev) \ ((struct usb_phy *)platform_get_drvdata(pdev)) +#define ci_to_imx_data(ci) \ + ((struct ci13xxx_imx_data *)dev_get_drvdata(ci->dev->parent)) struct ci13xxx_imx_data { struct device_node *phy_np; @@ -35,12 +37,32 @@ struct ci13xxx_imx_data { struct regulator *reg_vbus; }; +static int ci13xxx_imx_vbus(struct ci13xxx *ci, int enable) +{ + struct ci13xxx_imx_data *data = ci_to_imx_data(ci); + int ret; + + if (!data->reg_vbus) + return 0; + + if (enable) + ret = regulator_enable(data->reg_vbus); + else + ret = regulator_disable(data->reg_vbus); + if (ret) + dev_err(ci->dev, "ci13xxx_imx_vbus failed, enable:%d err:%d\n", + enable, ret); + + return ret; +} + static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata = { .name = "ci13xxx_imx", .flags = CI13XXX_REQUIRE_TRANSCEIVER | CI13XXX_PULLUP_ON_VBUS | CI13XXX_DISABLE_STREAMING, .capoffset = DEF_CAPOFFSET, + .set_vbus_power = ci13xxx_imx_vbus, }; static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) @@ -101,18 +123,10 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) /* we only support host now, so enable vbus here */ reg_vbus = devm_regulator_get(&pdev->dev, "vbus"); - if (!IS_ERR(reg_vbus)) { - ret = regulator_enable(reg_vbus); - if (ret) { - dev_err(&pdev->dev, - "Failed to enable vbus regulator, err=%d\n", - ret); - goto put_np; - } + if (!IS_ERR(reg_vbus)) data->reg_vbus = reg_vbus; - } else { + else reg_vbus = NULL; - } ci13xxx_imx_platdata.phy = data->phy; @@ -127,6 +141,9 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) *pdev->dev.dma_mask = DMA_BIT_MASK(32); dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); } + + platform_set_drvdata(pdev, data); + plat_ci = ci13xxx_add_device(&pdev->dev, pdev->resource, pdev->num_resources, &ci13xxx_imx_platdata); @@ -139,7 +156,6 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) } data->ci_pdev = plat_ci; - platform_set_drvdata(pdev, data); pm_runtime_no_callbacks(&pdev->dev); pm_runtime_enable(&pdev->dev); @@ -149,7 +165,6 @@ static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) err: if (reg_vbus) regulator_disable(reg_vbus); -put_np: if (phy_np) of_node_put(phy_np); clk_disable_unprepare(data->clk); diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index ebff9f4..e091147 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -106,6 +106,12 @@ static int host_start(struct ci13xxx *ci) if (usb_disabled()) return -ENODEV; + if (ci->platdata->set_vbus_power) { + ret = ci->platdata->set_vbus_power(ci, 1); + if (ret) + return ret; + } + hcd = usb_create_hcd(&ci_ehci_hc_driver, ci->dev, dev_name(ci->dev)); if (!hcd) return -ENOMEM; @@ -138,6 +144,8 @@ static void host_stop(struct ci13xxx *ci) usb_remove_hcd(hcd); usb_put_hcd(hcd); + if (ci->platdata->set_vbus_power) + ci->platdata->set_vbus_power(ci, 0); } int ci_hdrc_host_init(struct ci13xxx *ci) diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 544825d..080f479 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -23,6 +23,8 @@ struct ci13xxx_platform_data { #define CI13XXX_CONTROLLER_RESET_EVENT 0 #define CI13XXX_CONTROLLER_STOPPED_EVENT 1 void (*notify_event) (struct ci13xxx *ci, unsigned event); + /* set vbus power, it must be called in non-atomic context */ + int (*set_vbus_power) (struct ci13xxx *ci, int enable); }; /* Default offset of capability registers */ -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html