Linux USB Users

• Thread Index

• [PATCH 1/9] usb: dwc3: gadget: set Ignore Sequence Number bit from ConnectDone Event
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/9] usb: dwc3: fix for Link Layer Compliance Suite TD7.06
  • From: Felipe Balbi <balbi@xxxxxx>
• otg: sharing resources between host and gadget
  • From: Valentin Sitdikov <v.sitdikov@xxxxxxxxx>
• Re: qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Felipe Balbi <balbi@xxxxxx>
• Discussion about implementation of usb port power off mechanism for port with device
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Roger Quadros <rogerq@xxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: USB: panic with printk
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: Kernel Oops while disconnecting USB peripheral (always)
  • From: Sarbojit Ganguly <unixman.linuxboy@xxxxxxxxx>
• Re: Kernel Oops while disconnecting USB peripheral (always)
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Kernel Oops while disconnecting USB peripheral (always)
  • From: Sarbojit Ganguly <unixman.linuxboy@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: linux usb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] USB: plusb: Add support for PL-2501
  • From: kyak <bas@xxxxxxxx>
• Writing a driver for a not really HID compliant device
  • From: Marian Beermann <public@xxxxxxxxx>
• Re: qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• New input driver for eBeam device (ask for review)
  • From: Yann Cantin <yann.cantin@xxxxxxxxxxx>
• Re: qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: linux usb
  • From: chetan cr123 <chetancr123@xxxxxxxxx>
• Re: linux usb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: linux usb
  • From: chetan cr123 <chetancr123@xxxxxxxxx>
• Re: qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [PATCH 0/8] USB port power off mechanism
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• qmi wwan interface does not work in this version 3.5.rc7.next.20120720
  • From: Thomas Schäfer <tschaefer@xxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Francois Romieu <romieu@xxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: david@xxxxxxx
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: linux usb
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCHv2 2/2] ARM: vt8500: Add support for UHCI companion controller
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: linux usb
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• linux usb
  • From: chetan cr123 <chetancr123@xxxxxxxxx>
• Re: unneeded SubClass and Protocol entries in unusual_devs.h
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: unneeded SubClass and Protocol entries in unusual_devs.h
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCHv4 2/2] ARM: vt8500: Add support for UHCI companion controller
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCHv4 1/2] ARM: vt8500: Update vt8500-ehci driver to support device tree.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: "Rafael J. Wysocki" <rjw@xxxxxxx>
• Re: [PATCHv2 2/2] ARM: vt8500: Add support for UHCI companion controller
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] usb: otg: twl4030-usb: spin_unlock_irq in interrupt handler
  • From: Denis Efremov <yefremov.denis@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCHv3 2/2] ARM: vt8500: Add support for UHCI companion controller
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: vt8500: Update vt8500-ehci driver to support device tree.
  • From: Tony Prisk <linux@xxxxxxxxxxxxxxx>
• [PATCH 2/2] usb/at91udc: Don't check for ep->ep.desc
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/at91udc: don't overwrite driver data
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• bug fixes for at91_udc, introduced in v3.5 release cycle
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Balakumar <kernelfanatic@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] isp1362-hcd.c: usb message always saved in case of underrun
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Borislav Petkov <bp@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Borislav Petkov <bp@xxxxxxxxx>
• [RFC] firmware load: defer request_firmware during early boot and resume
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: unneeded SubClass and Protocol entries in unusual_devs.h
  • From: Mason <mpeg.blue@xxxxxxx>
• Re: [PATCH] isp1362-hcd.c: usb message always saved in case of underrun
  • From: Claudio Scordino <claudio@xxxxxxxxxxxxxxx>
• unneeded SubClass and Protocol entries in unusual_devs.h
  • From: Mason <mpeg.blue@xxxxxxx>
• Re: [PATCH] usb: chipidea: ci13xxx-imx: remove global struct
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• Re: Regarding usb 2.0 synopsys otg controller status
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/2 v3] USB: dwc3-exynos: Add vbus setup function to the exynos dwc3 glue layer
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: linux-next: Tree for July 17 (debugobjects: bt | btusb | usb related?)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [PATCH 1/2 v3] USB: dwc3-exynos: Add support for device tree
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/6] USBHID: fix several suspend-related bugs
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: linux-next: Tree for July 17 (debugobjects: bt | btusb | usb related?)
  • From: Stanislaw Gruszka <sgruszka@xxxxxxxxxx>
• [PATCH RESEND] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH RESEND] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• RE: [PATCH 2/2] usb/at91udc: Don't check for ep->ep.desc
  • From: "Mario Jorge Isidoro" <Mario.Isidoro@xxxxxxxxx>
• RE: [PATCH 1/2] usb/at91udc: don't overwrite driver data
  • From: "Mario Jorge Isidoro" <Mario.Isidoro@xxxxxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH] hid-core : optimize in case of hidraw
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH v2] hidraw : fix list->buffer memleak
  • From: Jiri Kosina <jkosina@xxxxxxx>
• Re: [PATCH 2/2] usb/at91udc: Don't check for ep->ep.desc
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH 1/2] usb/at91udc: don't overwrite driver data
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH v3] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [patch] USB: legousbtower.c: remove a bogus NULL check
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [patch] USB: whci-hcd: fix NULL dereference on allocation failure
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: usbserial issue
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v5 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 08/11] arm/dts: Add twl4030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 06/11] arm/dts: Add twl6030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v5 00/11] omap: musb: Add device tree support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/4] usb: musb: gadget: fix kernel crash after rmmod
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 4/4] usb: musb: check for zero byte in musb_read/write_fifo
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 2/4] usb: musb: host: don't program dma for zero byte tx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 3/4] usb: musb: gadget: don't program dma for zero byte tx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 4/4] usb: musb: gadget: do read_fifo for non zero data only
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Peter Chen <hzpeterchen@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH] isp1362-hcd.c: usb message always saved in case of underrun
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: usbserial issue
  • From: Guilherme Bedin <gbedin@xxxxxxxxx>
• Re: usbserial issue
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [PATCH 6/6] USBHID: fix error paths in suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] USBHID: check for suspend or reset before restarting
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/6] USBHID: replace HID_REPORTED_IDLE with HID_SUSPENDED
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/6] USBHID: inline some simple routines
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/6] USBHID: fix autosuspend calls
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/6] USBHID: fix use-after-free bug
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/6] USBHID: fix several suspend-related bugs
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usbserial issue
  • From: Guilherme Bedin <gbedin@xxxxxxxxx>
• Re: USB enumeration post-resume NOT persistent yet "persist" --> swapped devices nodes --> root partition reference broken
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: USB enumeration post-resume NOT persistent yet "persist" --> swapped devices nodes --> root partition reference broken
  • From: Andreas Mohr <andi@xxxxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• [PATCH 2/2] usb/at91udc: Don't check for ep->ep.desc
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• [PATCH 1/2] usb/at91udc: don't overwrite driver data
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Balakumar <kernelfanatic@xxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: USB enumeration post-resume NOT persistent yet "persist" --> swapped devices nodes --> root partition reference broken
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 0/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/7 v2] usb: gadget: mv_udc: bug fix and feature add
  • From: Neil Zhang <zhangwm@xxxxxxxxxxx>
• Re: some questions about usb_serial_probe
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] usb: musb: gadget: do read_fifo for non zero data only
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v4 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <lantianyu1986@xxxxxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• RE: [PATCH v4 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] usb: chipidea: ci13xxx-imx: remove global struct
  • From: Michael Grzeschik <mgr@xxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• [PATCH v4 09/11] usb: musb: dsps: remove explicit NOP device creation
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 07/11] usb: otg: nop: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 02/11] usb: musb: kill global and static for multi instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 10/11] usb: musb: dsps: get the PHY using phandle api
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 11/11] arm/dts: am33xx: add phy phandle to usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 01/11] usb: musb: add musb->id to identify core instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 03/11] usb: musb: am335x: add support for dual instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 05/11] usb: musb: dsps: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v4 00/11] usb: musb: adding multi instance support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 4/4] usb: musb: gadget: do read_fifo for non zero data only
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 4/4] usb: musb: gadget: do read_fifo for non zero data only
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• [PATCH v4 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 1/2] usb: Add quirk detection based on interface information
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v4 0/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] OMAP: USB : Fix the EHCI enumeration and core retention issue
  • From: "Munegowda, Keshava" <keshava_mgowda@xxxxxx>
• RE: [PATCH v3 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH v3 07/11] usb: otg: nop: add dt support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: Problems with the Nikon D800 and USB3
  • From: "Xu, Andiry" <Andiry.Xu@xxxxxxx>
• Re: [PATCH v3 07/11] usb: otg: nop: add dt support
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v3 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH] usb: chipidea: ci13xxx-imx: remove global struct
  • From: Wolfram Sang <w.sang@xxxxxxxxxxxxxx>
• [PATCH] USB: musb: NAK timeout scheme on bulk TX endpoint
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 4/4] usb: musb: gadget: do read_fifo for non zero data only
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 3/4] usb: musb: gadget: don't program dma for zero byte tx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/4] usb: musb: gadget: fix kernel crash after rmmod
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/4] usb: musb: host: don't program dma for zero byte tx
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• usbip & etoken
  • From: Oleg <lego12239@xxxxxxxxx>
• [PATCH v3 01/11] usb: musb: add musb->id to identify core instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 07/11] usb: otg: nop: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 03/11] usb: musb: am335x: add support for dual instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 05/11] usb: musb: dsps: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 10/11] usb: musb: dsps: get the PHY using phandle api
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 00/11] usb: musb: adding multi instance support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 09/11] usb: musb: dsps: remove explicit NOP device creation
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 11/11] arm/dts: am33xx: add phy phandle to usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 02/11] usb: musb: kill global and static for multi instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v3 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• USB enumeration post-resume NOT persistent yet "persist" --> swapped devices nodes --> root partition reference broken
  • From: Andreas Mohr <andi@xxxxxxxx>
• Re: some questions about usb_serial_probe
  • From: loody <miloody@xxxxxxxxx>
• Re: [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 00/12] chipidea/imx: add otg support and some bug fix
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH] target: Allow for target_submit_cmd() returning errors
  • From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
• [PATCH] usb: chipidea: ci13xxx-imx: remove global struct
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• [PATCH] usb composite: fix locking in usb_function_activate
  • From: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: linux-next: Tree for July 17 (debugobjects: bt | btusb | usb related?)
  • From: Sedat Dilek <sedat.dilek@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Kernel tracing options with USB subsystem
  • From: Maxin B John <maxin.john@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Kernel tracing options with USB subsystem
  • From: Balakumar <kernelfanatic@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] net: qmi_wwan: add ZTE MF821D
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH net-next] net: qmi_wwan: make dynamic device IDs work
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v3 1/2] usb: Add quirk detection based on interface information
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] usb: Add quirk detection based on interface information
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] usb: Add quirk detection based on interface information
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: some questions about usb_serial_probe
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <linuxzsc@xxxxxxxxx>
• [PATCH v3 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] usb: Add quirk detection based on interface information
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v3 0/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: Problems with ASMedia ASM1042 SuperSpeed USB Host
  • From: Ingo Rohloff <Ingo.Rohloff@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH v2 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH v2 1/2] usb: Add quirk detection based on interface information
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 2/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 0/2] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH v2 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: Problems with the Nikon D800 and USB3
  • From: Richard Adams <richard@xxxxxxxxxxxx>
• [PATCH v4 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 06/11] arm/dts: Add twl6030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 00/11] omap: musb: Add device tree support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v4 08/11] arm/dts: Add twl4030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/2] ARM: dts: imx6q-sabrelite: add usbmisc device
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 1/2] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• [PATCH v2 0/2] imx: add usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• RE: [PATCH v2 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Sebastian Andrzej Siewior <sebastian@xxxxxxxxxxxxx>
• Re: some questions about usb_serial_probe
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH] target: Allow for target_submit_cmd() returning errors
  • From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
• Re: [PATCH] isp1362-hcd.c: usb message always saved in case of underrun
  • From: Claudio Scordino <claudio@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• RE: [PATCH v2 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.
  • From: Denis Turischev <denis@xxxxxxxxxxxxxx>
• RE: [PATCH v2 07/11] usb: otg: nop: add dt support
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• [PATCH v3 00/11] omap: musb: Add device tree support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 08/11] arm/dts: Add twl4030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 06/11] arm/dts: Add twl6030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v3 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 0/2] omap: add ocp2scp as a bus driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH 2/2] arm/dts: omap4: Add ocp2scp data
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH v2 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: some questions about usb_serial_probe
  • From: loody <miloody@xxxxxxxxx>
• Re: some questions about usb_serial_probe
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [RFC/PATCH v2] usb: dwc3: Introduce OTG driver for dwc3
  • From: Anton Tikhomirov <av.tikhomirov@xxxxxxxxxxx>
• RE: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Chen Peter-B29397 <B29397@xxxxxxxxxxxxx>
• some questions about usb_serial_probe
  • From: loody <miloody@xxxxxxxxx>
• Re: [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Eric Ding <ericding@xxxxxxxxxxxx>
• Re: [PATCH] target: Allow for target_submit_cmd() returning errors
  • From: "Nicholas A. Bellinger" <nab@xxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 4/8] usb/acpi: Store info on device removability.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 5/8] xhci: Handle clear PORT_POWER feature.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 8/8] usb : Add sysfs files to control port power.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 6/8] usb/acpi: Use ACPI methods to power off ports.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 7/8] usb: Fail a get config when the port is powered off.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 3/8] usb/acpi: Bind ACPI node to USB port, not usb_device.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 2/8] usb: move children to struct usb_port
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 1/8] usb: make usb port a real device
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH 0/8] USB port power off mechanism
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH net-next] net: qmi_wwan: make dynamic device IDs work
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Problems with ASMedia ASM1042 SuperSpeed USB Host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: Problems with ASMedia ASM1042 SuperSpeed USB Host
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• Re: usb-next EHCI improvements success report
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• usb-next EHCI improvements success report
  • From: Daniel Drake <dsd@xxxxxxxxxx>
• Re: [PATCH RESEND 0/3] scsi: fix internal write cache issue on usb hdd.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH RESEND v4] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: EHCI: Centralize controller initialization
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [Patch v5 08/13] ARM: imx6q: add config-on-boot gpios
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxx>
• Re: [PATCH v2 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 07/11] usb: otg: nop: add dt support
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH v2 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH Resend] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCH 1/1] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH RESEND v4] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH RESEND v4] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v2 00/11] usb: musb: adding multi instance support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 04/11] usb: otg: nop: add support for multiple tranceiver
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 07/11] usb: otg: nop: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 05/11] usb: musb: dsps: add dt support
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 02/11] usb: musb: kill global and static for multi instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 03/11] usb: musb: am335x: add support for dual instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 10/11] usb: musb: dsps: get the PHY using phandle api
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 01/11] usb: musb: add musb->id to identify core instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 08/11] arm/dts: am33xx: add dt data for usb nop phy
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 11/11] arm/dts: am33xx: add phy phandle to usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 06/11] arm/dts: am33xx: Add dt data for usbss
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH v2 09/11] usb: musb: dsps: remove explicit NOP device creation
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 1/1] usb: s3c-hsotg: Add header file protection macros in s3c-hsotg.h
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• EHCI: Centralize controller initialization
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 08/11] arm/dts: Add twl4030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 09/11] drivers: usb: musb: Add device tree support for omap musb glue
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 10/11] arm/dts: omap: Add usb_otg and glue data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 06/11] arm/dts: Add twl6030-usb data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 02/11] arm/dts: omap: Add omap-usb2 dt data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH v2 00/11] omap: musb: Add device tree support
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [PATCH RESEND 0/3] scsi: fix internal write cache issue on usb hdd.
  • From: James Bottomley <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2 01/11] usb: musb: add musb->id to identify core instance
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: Re: usb 2.0 device connected on Super Speed HUB on USB 3.0 Port throws error during enumeration on 3.4 kernel.
  • From: Elric Fu <elricfu1@xxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• Re: [PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.
  • From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx>
• [PATCH v4] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH v4] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• 答复: [PATCH 7/13] USB:support the new interfaces of Huawei Data Card devices in option driver
  • From: "Fangxiaozhi (Franko)" <fangxiaozhi@xxxxxxxxxx>
• Re: xhci_hcd - bug: unable to handle kernel NULL pointer dereference (ring_doorbell_for_active_rings)
  • From: Sergio Correia <lists@xxxxxxxx>
• Re: [PATCH] usb: chipidea: cleanup dma_pool if udc_start() fails
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 10/12] USB: chipidea: add set_vbus_power support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 00/12] chipidea/imx: add otg support and some bug fix
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH usb-next 0/6] making qcserial more flexible
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 0/3 v3] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [Pull Request] LPM fixes and LTM patches for 3.6
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/25] USB: EHCI changes
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH RESEND 0/3] scsi: fix internal write cache issue on usb hdd.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2] usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: USB: panic with printk
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 25/25] USB: EHCI: resolve some unlikely races
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 14/25] USB: EHCI: use hrtimer for controller death
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/25] USB: EHCI: use hrtimer for async schedule
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 9/25] USB: EHCI: use hrtimer for the periodic schedule
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 8/25] USB: EHCI: introduce high-res timer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH] musb_gadget: use variables according to their names in rxstate()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
• [PATCH] xhci: EHCI/xHCI ports switching on Intense-PC.
  • From: Denis Turischev <denis@xxxxxxxxxxxxxx>
• Re: [PATCH 25/25] USB: EHCI: resolve some unlikely races
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 14/25] USB: EHCI: use hrtimer for controller death
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 12/25] USB: EHCI: use hrtimer for async schedule
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: [PATCH 9/25] USB: EHCI: use hrtimer for the periodic schedule
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: USB: panic with printk
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH 8/25] USB: EHCI: introduce high-res timer
  • From: Ming Lei <tom.leiming@xxxxxxxxx>
• Re: USB: panic with printk
  • From: Manuel Lauss <manuel.lauss@xxxxxxxxx>
• Re: Problems with ASMedia ASM1042 SuperSpeed USB Host
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: Problems with the Nikon D800 and USB3
  • From: Richard Adams <richard@xxxxxxxxxxxx>
• Re: suspending USB keyboards
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] drivers: bus: add a new driver for omap-ocp2scp
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 2/2] arm/dts: omap4: Add ocp2scp data
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• [PATCH 0/2] omap: add ocp2scp as a bus driver
  • From: Kishon Vijay Abraham I <kishon@xxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3 v3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/3 v3] USB: ehci-s5p: Add support for device tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3 v3] USB: ohci-exynos: Add support for device tree
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [PATCH V4 2/5] ARM: OMAP: USB: HOST TLL platform driver
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH V4 3/5] ARM: OMAP: USB: Invoke the TLL driver from USB HS core driver
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH V4 1/5] ARM: OMAP: Add the USB TLL clocks device name
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH V4 4/5] ARM: OMAP: USB: Remove TLL specific code from USB HS core driver
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH V4 5/5] ARM: OMAP: Remove older device name of the USB TLL clocks
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• [PATCH V4 0/5] ARM: OMAP: HOST: TLL driver implementation
  • From: Keshava Munegowda <keshava_mgowda@xxxxxx>
• Re: [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: chipidea: fix linking of udc if gadget is build as module
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• [RFC PATCH for v3.5 2/2] usb: gadget: at91_udc: fix regression when connecting the usb cable
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• [RFC PATCH for v3.5 1/2] usb: gadget: at91_udc: fix oops regression when connecting usb cable
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• [RFC PATCH for v3.5 0/2] usb: gadget: at91_udc: fix oops regression
  • From: Fabio Porcedda <fabio.porcedda@xxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 10/12] USB: chipidea: add set_vbus_power support
  • From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx>
• Re: USB: panic with printk
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: possible usb ehci issue in the 3.5-rcs
  • From: Daniel Mack <zonque@xxxxxxxxx>
• Re: [PATCH net-next 7/8] usb: Use eth_random_addr
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH net-next 0/8] etherdevice: Rename random_ether_addr to eth_random_addr
  • From: Felipe Balbi <balbi@xxxxxx>
• Problems with ASMedia ASM1042 SuperSpeed USB Host
  • From: Ingo Rohloff <Ingo.Rohloff@xxxxxxxxxxxxxx>
• Re: [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Oliver Neukum <oneukum@xxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: suspending USB keyboards
  • From: Oliver Neukum <oliver@xxxxxxxxxx>
• [RFC PATCH] USB: enable "power/wakeup" to control remote wakeup in the runtime suspend
  • From: Lan Tianyu <tianyu.lan@xxxxxxxxx>
• Re: [PATCH 3/3 v3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 2/3 v3] USB: ehci-s5p: Add support for device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH 1/3 v3] USB: ohci-exynos: Add support for device tree
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• [PATCH 2/2 v3] USB: dwc3-exynos: Add vbus setup function to the exynos dwc3 glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/2 v3] USB: dwc3-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/2 v3] USB: host: Add Device tree support for dwc3-exynos
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 0/3 v3] USB: host: Add Device tree support for ohci-exynos & ehci-s5p
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 3/3 v3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 1/3 v3] USB: ohci-exynos: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• [PATCH 2/3 v3] USB: ehci-s5p: Add support for device tree
  • From: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
• Re: xhci_hcd: external drive not initialised if already connected during restart or cold boot
  • From: Andiry Xu <andiry.xu@xxxxxxx>
• Re: [PATCH 12/12] USB: chipidea: add imx usbmisc support
  • From: Richard Zhao <richard.zhao@xxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• Re: usb3 writes fail with transcend rdf8
  • From: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
• [PATCH usb-next 6/6] USB: sierra: QMI mode MC7710 moved to qcserial
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 5/6] USB: qcserial: adding Sierra Wireless devices
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 4/6] USB: qcserial: support generic Qualcomm serial ports
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 3/6] USB: qcserial: make probe more flexible
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 2/6] USB: qcserial: centralize probe exit path
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 1/6] USB: qcserial: consolidate usb_set_interface calls
  • From: Bjørn Mork <bjorn@xxxxxxx>
• [PATCH usb-next 0/6] making qcserial more flexible
  • From: Bjørn Mork <bjorn@xxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>
• Re: 3.4.4: disabling irq
  • From: Udo van den Heuvel <udovdh@xxxxxxxxx>