On Wed, 2012-07-18 at 11:10 +0200, Sebastian Andrzej Siewior wrote:
> On 07/18/2012 02:05 AM, Nicholas A. Bellinger wrote:
> >> index 02ace18..9ddf315 100644
> >> --- a/drivers/usb/gadget/tcm_usb_gadget.c
> >> +++ b/drivers/usb/gadget/tcm_usb_gadget.c
> >> @@ -1060,7 +1060,10 @@ static void usbg_cmd_work(struct work_struct *work)
> >> tpg = cmd->fu->tpg;
> >> tv_nexus = tpg->tpg_nexus;
> >> dir = get_cmd_dir(cmd->cmd_buf);
> >> - if (dir< 0) {
> >> + if (dir< 0 ||
> >> + target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
> >> + cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
> >> + 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE)) {
> >> transport_init_se_cmd(se_cmd,
> >> tv_nexus->tvn_se_sess->se_tpg->se_tpg_tfo,
> >> tv_nexus->tvn_se_sess, cmd->data_len, DMA_NONE,
> >> @@ -1069,12 +1072,7 @@ static void usbg_cmd_work(struct work_struct *work)
> >> transport_send_check_condition_and_sense(se_cmd,
> >> TCM_UNSUPPORTED_SCSI_OPCODE, 1);
> >> usbg_cleanup_cmd(cmd);
> >> - return;
> >> }
> >> -
> >> - target_submit_cmd(se_cmd, tv_nexus->tvn_se_sess,
> >> - cmd->cmd_buf, cmd->sense_iu.sense, cmd->unpacked_lun,
> >> - 0, cmd->prio_attr, dir, TARGET_SCF_UNKNOWN_SIZE);
> >> }
> >>
> >> static int usbg_submit_command(struct f_uas *fu,
> >
> > Looking at this part again target_submit_cmd() has been moved ahead of
> > target_init_se_cmd() in the exception path, which ends up getting called
> > twice during a target_get_sess_cmd() failure..
> >
> > It looks like usbg_cmd_work() + bot_cmd_work() will need some work if
> > they intends to use a non zero failure to signal exception here, without
> > invoking a CHECK_CONDITION and sense. Actually, I'm not even sure
> > sending a CHECK_CONDITION here after the target_submit_cmd() is going to
> > work for other fabrics drivers, but it appears to work with usb-gadget.
> > (Sebastian..?)
>
> For UAS the status/ sense URB is sent right away (without any data) and
> this worked the last time I tested.
<nod>, thanks for the re-clarification on this.. ;)
> For BOT things are a little complicated. What I do is to send empty
> data (to fill the data pipe) and send a bad status so the other side
> learns that the transfer failed somehow. The sense information is lost.
> What I should do is to queue this sense data for the next MODE_SENSE
> request which will be coming soon. Right now WinXP repeats a failed
> command thrice if MODE_SENSE returns no error. "This" is on my to-fix
> list…
>
Ok, so I think the special case for usb-gadget where is able to call
transport_send_check_condition_and_sense() should be OK for the single
target_get_sess_cmd() -> target_submit_cmd() failure case..
This is not going to be safe for just about every other fabric AFAICT,
so I think we need a comment here to describe that fact..
> > So for the moment, lets fix the double se_cmd init and make things a
> > little easier to read.. Sebastian, please have a look and double check
> > that the (dir< 0) + target_submit_cmd() failures cases are both going
> > to work as expected whilst sending a CHECK_CONDITION response.
>
> The sense code should only be sent once and
> transport_send_check_condition_and_sense() sets
> SCF_SENT_CHECK_CONDITION and checks for it so doing it twice should not
> do any harm right? But grep does not say when this flag gets removed.
>
Correct. The SCF_SENT_CHECK_CONDITION bit does not get removed ahead of
fabric descriptor release.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
