Re: [PATCH v1 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday 10 July 2012 11:58 AM, ABRAHAM, KISHON VIJAY wrote:
Hi,

On Tue, Jul 10, 2012 at 11:28 AM, Rajendra Nayak<rnayak@xxxxxx>  wrote:
On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:

Add device tree support for twl6030 usb driver.
Update the Documentation with device tree binding information.

Signed-off-by: Kishon Vijay Abraham I<kishon@xxxxxx>
---
   .../devicetree/bindings/usb/twlxxxx-usb.txt        |   18 ++++++++
   drivers/usb/otg/twl6030-usb.c                      |   45
++++++++++++++------
   2 files changed, 50 insertions(+), 13 deletions(-)
   create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt

diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
new file mode 100644
index 0000000..f293271
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -0,0 +1,18 @@
+USB COMPARATOR OF TWL CHIPS
+
+TWL6030 USB COMPARATOR
+ - compatible : Should be "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified.
First
+   interrupt number is the otg interrupt number that raises ID interrupts
when
+   the controller has to act as host and the second interrupt number is
the
+   usb interrupt number that raises VBUS interrupts when the controller
has to
+   act as device
+ - regulator :<supply-name>   can be "vusb" or "ldousb"
+ -<supply-name>-supply : phandle to the regulator device tree node
+
+twl6030-usb {
+       compatible = "ti,twl6030-usb";
+       interrupts =<   4 10>;
+       regulator = "vusb";
+       vusb-supply =<&vusb>;


This doesn't seem right. Why do you ned a 'regulator' string along
with the phandle?

The original code was something like
	if (twl->features&  TWL6025_SUBCLASS)
		regulator_name = "ldousb";
	else
		regulator_name = "vusb";

I wasn't sure how to handle this *TWL6025_SUBCLASS* stuff.


+};
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 6a361d2..20b7abe 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -105,7 +105,7 @@ struct twl6030_usb {
         u8                      asleep;
         bool                    irq_enabled;
         bool                    vbus_enable;
-       unsigned long           features;
+       const char              *regulator;
   };

   #define       comparator_to_twl(x) container_of((x), struct twl6030_usb,
comparator)
@@ -153,13 +153,6 @@ static int twl6030_start_srp(struct phy_companion
*comparator)

   static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
   {
-       char *regulator_name;
-
-       if (twl->features&   TWL6025_SUBCLASS)

-               regulator_name = "ldousb";
-       else
-               regulator_name = "vusb";
-
         /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);

@@ -169,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb
*twl)
         /* Program MISC2 register and set bit VUSB_IN_VBAT */
         twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);

-       twl->usb3v3 = regulator_get(twl->dev, regulator_name);
+       twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
         if (IS_ERR(twl->usb3v3))
                 return -ENODEV;

@@ -324,9 +317,9 @@ static int __devinit twl6030_usb_probe(struct
platform_device *pdev)
   {
         struct twl6030_usb      *twl;
         int                     status, err;
-       struct twl4030_usb_data *pdata;
-       struct device *dev =&pdev->dev;

-       pdata = dev->platform_data;
+       struct device_node      *np = pdev->dev.of_node;
+       struct device           *dev =&pdev->dev;

+       struct twl4030_usb_data *pdata = dev->platform_data;

         twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
         if (!twl)
@@ -335,13 +328,28 @@ static int __devinit twl6030_usb_probe(struct
platform_device *pdev)
         twl->dev                =&pdev->dev;

         twl->irq1               = platform_get_irq(pdev, 0);
         twl->irq2               = platform_get_irq(pdev, 1);
-       twl->features           = pdata->features;
         twl->linkstat           = OMAP_MUSB_UNKNOWN;

         twl->comparator.set_vbus        = twl6030_set_vbus;
         twl->comparator.start_srp       = twl6030_start_srp;
         omap_usb2_set_comparator(&twl->comparator);

+       if (np) {
+               err = of_property_read_string(np,
"regulator",&twl->regulator);

+               if (err<   0) {
+                       dev_err(&pdev->dev, "unable to get regulator\n");
+                       return err;
+               }


Isn't there a better way for the driver to know which supply to use instead
of DT passing the supply name?

The problem I see is this same driver is used for twl6030 and twl6025
and the regulator used is different for these two chips (And I think

hmm, so based on what chip is used on a board, shouldn't the board dts
file just map the right regulator with a supply name?
This doesn't look like something the driver should be bothered about.

twl6025 will also use the same dt file as twl6030 as I don't see a
different file for 6025).

Thanks
Kishon

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux