On Thursday 28 June 2012 05:21 PM, Kishon Vijay Abraham I wrote:
Add device tree support for twl6030 usb driver.
Update the Documentation with device tree binding information.
Signed-off-by: Kishon Vijay Abraham I<kishon@xxxxxx>
---
.../devicetree/bindings/usb/twlxxxx-usb.txt | 18 ++++++++
drivers/usb/otg/twl6030-usb.c | 45 ++++++++++++++------
2 files changed, 50 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
new file mode 100644
index 0000000..f293271
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt
@@ -0,0 +1,18 @@
+USB COMPARATOR OF TWL CHIPS
+
+TWL6030 USB COMPARATOR
+ - compatible : Should be "ti,twl6030-usb"
+ - interrupts : Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the otg interrupt number that raises ID interrupts when
+ the controller has to act as host and the second interrupt number is the
+ usb interrupt number that raises VBUS interrupts when the controller has to
+ act as device
+ - regulator :<supply-name> can be "vusb" or "ldousb"
+ -<supply-name>-supply : phandle to the regulator device tree node
+
+twl6030-usb {
+ compatible = "ti,twl6030-usb";
+ interrupts =< 4 10>;
+ regulator = "vusb";
+ vusb-supply =<&vusb>;
This doesn't seem right. Why do you ned a 'regulator' string along
with the phandle?
+};
diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c
index 6a361d2..20b7abe 100644
--- a/drivers/usb/otg/twl6030-usb.c
+++ b/drivers/usb/otg/twl6030-usb.c
@@ -105,7 +105,7 @@ struct twl6030_usb {
u8 asleep;
bool irq_enabled;
bool vbus_enable;
- unsigned long features;
+ const char *regulator;
};
#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator)
@@ -153,13 +153,6 @@ static int twl6030_start_srp(struct phy_companion *comparator)
static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
{
- char *regulator_name;
-
- if (twl->features& TWL6025_SUBCLASS)
- regulator_name = "ldousb";
- else
- regulator_name = "vusb";
-
/* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG);
@@ -169,7 +162,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl)
/* Program MISC2 register and set bit VUSB_IN_VBAT */
twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2);
- twl->usb3v3 = regulator_get(twl->dev, regulator_name);
+ twl->usb3v3 = regulator_get(twl->dev, twl->regulator);
if (IS_ERR(twl->usb3v3))
return -ENODEV;
@@ -324,9 +317,9 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
{
struct twl6030_usb *twl;
int status, err;
- struct twl4030_usb_data *pdata;
- struct device *dev =&pdev->dev;
- pdata = dev->platform_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev =&pdev->dev;
+ struct twl4030_usb_data *pdata = dev->platform_data;
twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL);
if (!twl)
@@ -335,13 +328,28 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev)
twl->dev =&pdev->dev;
twl->irq1 = platform_get_irq(pdev, 0);
twl->irq2 = platform_get_irq(pdev, 1);
- twl->features = pdata->features;
twl->linkstat = OMAP_MUSB_UNKNOWN;
twl->comparator.set_vbus = twl6030_set_vbus;
twl->comparator.start_srp = twl6030_start_srp;
omap_usb2_set_comparator(&twl->comparator);
+ if (np) {
+ err = of_property_read_string(np, "regulator",&twl->regulator);
+ if (err< 0) {
+ dev_err(&pdev->dev, "unable to get regulator\n");
+ return err;
+ }
Isn't there a better way for the driver to know which supply to use
instead of DT passing the supply name?
regards,
Rajendra
+ } else if (pdata) {
+ if (pdata->features& TWL6025_SUBCLASS)
+ twl->regulator = "ldousb";
+ else
+ twl->regulator = "vusb";
+ } else {
+ dev_err(&pdev->dev, "twl6030 initialized without pdata\n");
+ return -EINVAL;
+ }
+
/* init spinlock for workqueue */
spin_lock_init(&twl->lock);
@@ -403,12 +411,23 @@ static int __exit twl6030_usb_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id twl6030_usb_id_table[] = {
+ { .compatible = "ti,twl6030-usb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, twl6030_usb_id_table);
+#else
+#define twl6030_usb_id_table NULL
+#endif
+
static struct platform_driver twl6030_usb_driver = {
.probe = twl6030_usb_probe,
.remove = __exit_p(twl6030_usb_remove),
.driver = {
.name = "twl6030_usb",
.owner = THIS_MODULE,
+ .of_match_table = twl6030_usb_id_table,
},
};
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
