On Wed, Jul 11, 2012 at 10:12 AM, Matt Causey <matt.causey@xxxxxxxxx> wrote: > On Tue, Jul 10, 2012 at 10:55 PM, Andiry Xu <andiry.xu@xxxxxxx> wrote: >> On 07/11/2012 01:56 AM, Matt wrote: >>> >>> Lee Harris<lee.r.harris@...> writes: >>> >>>> >>>> >>>> Hi Sarah >>>> >>>> Whenever I restart or coldboot, my external drive (3.5 sata in a USB3 >>>> enclosure) is not detected / initialised correctly. fdisk -l does not >>>> show the drive at all. >>>> I have found that I have to: >>>> turn it off ( or disconnect the usb cable) >>>> modprobe -r xhci_hcd >>>> modprobe xhci_hcd >>>> and then turn it on. It is then found and initialised. >>> >>> >>> >>> I'm having this same issue. Does anyone have any ideas? >>> >> >> Can you post the bootup dmesg with device connected and CONFIG_USB_DEBUG and >> CONFIG_USB_XHCI_HCD_DEBUGGING enabled? >> >> Thanks, >> Andiry >> >> > > Some more background...I've got another OS image that runs Linux > 2.6.32-33-generic (Ubuntu 10.4 LTS) - and that OS on this hardware > works as expected. I've also tested Linux 3.2.22 and it fails in the > same way on my system. > > Upon more digging, what I'm finding is that if I leave my device > disconnected from the USB3 port when I boot the system, and the > connect the device after the system has booted fully, the device works > correctly. The problem occurs when a device is connected to the USB3 > port, and I simply boot the system. The dmesg below is from the test > system that has the problem. My configuration is also included as an > attachment, in case that's helpful. > > dmesg: > > loaded but no devices found > Non-volatile memory driver v1.3 > Linux agpgart interface v0.103 > Refined TSC clocksource calibration: 1646.493 MHz. > Switching to clocksource tsc > floppy0: no floppy controllers found > brd: module loaded > loop: module loaded > Uniform Multi-Platform E-IDE driver > ide_generic: please use "probe_mask=0x3f" module parameter for probing > all legacy ISA IDE ports > Probing IDE interface ide0... > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > ide1 at 0x170-0x177,0x376 on irq 15 > ide-gd driver 1.18 > ahci 0000:00:11.0: version 3.0 > ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode > ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part > scsi0 : ahci > ata1: SATA max UDMA/133 abar m1024@0xfeb4a000 port 0xfeb4a100 irq 19 > e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI > e1000: Copyright (c) 1999-2006 Intel Corporation. > e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 > e1000e: Copyright(c) 1999 - 2011 Intel Corporation. > Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 > Copyright (c) 2007-2009 Intel Corporation. > pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx > e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI > e100: Copyright(c) 1999-2006 Intel Corporation > tg3.c:v3.116 (December 3, 2010) > tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > tg3 0000:04:00.0: setting latency timer to 64 > tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI > Express) MAC address f8:0f:41:41:e6:c5 > tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T > Ethernet) (WireSpeed[1]) > tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] > tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] > sky2: driver version 1.28 > PPP generic driver version 2.4.2 > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver > usbcore: registered new interface driver pegasus > usbcore: registered new interface driver cdc_ether > usbcore: registered new interface driver rndis_host > cdc_ncm: 7-Feb-2011 > usbcore: registered new interface driver cdc_ncm > Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ] > Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] > usbcore: registered new interface driver zd1211rw > usbcore: registered new interface driver rtl8187 > usbcore: registered new interface driver rndis_wlan > usbcore: registered new interface driver zd1201 > usbcore: registered new interface driver usb8xxx > usbcore: registered new interface driver lbtf_usb > usbcore: registered new interface driver rt2500usb > usbcore: registered new interface driver rt73usb > usbcore: registered new interface driver rt2800usb > usbcore: registered new interface driver ar9170usb > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 > ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 > ehci_hcd 0000:00:12.2: EHCI Host Controller > drivers/usb/core/inode.c: creating file 'devices' > drivers/usb/core/inode.c: creating file '001' > ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 > ordered !ppc ports=5 > ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 > ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM > ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy > qh workaround > ehci_hcd 0000:00:12.2: debug port 1 > ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 > period=1024 Reset HALT > ehci_hcd 0000:00:12.2: MWI active > ehci_hcd 0000:00:12.2: supports USB remote wakeup > ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb48000 > ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 > period=1024 Reset HALT > ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN > ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 > usb usb1: default language 0x0409 > usb usb1: udev 1, busnum 1, minor = 0 > usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 > usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb1: Product: EHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.38.2-tinycore ehci_hcd > usb usb1: SerialNumber: 0000:00:12.2 > usb usb1: usb_probe_device > usb usb1: configuration #1 chosen from 1 choice > usb usb1: adding 1-0:1.0 (config #1, interface 0) > hub 1-0:1.0: usb_probe_interface > hub 1-0:1.0: usb_probe_interface - got id > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 5 ports detected > hub 1-0:1.0: standalone hub > hub 1-0:1.0: no power switching (usb 1.0) > hub 1-0:1.0: individual port over-current protection > hub 1-0:1.0: power on to power good time: 20ms > hub 1-0:1.0: local power source is good > hub 1-0:1.0: trying to enable port power on non-switchable hub > drivers/usb/core/inode.c: creating file '001' > ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver > ohci_hcd: block sizes: ed 64 td 64 > ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 > ohci_hcd 0000:00:12.0: OHCI Host Controller > drivers/usb/core/inode.c: creating file '002' > ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 > ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk > ohci_hcd 0000:00:12.0: created debug files > ohci_hcd 0000:00:12.0: supports USB remote wakeup > ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb49000 > ohci_hcd 0000:00:12.0: OHCI controller state > ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers > ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 > ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 > ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF > ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH > ohci_hcd 0000:00:12.0: hcca frame #0005 > ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) > ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 > ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE > ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS > ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS > ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS > ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS > ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS > usb usb2: default language 0x0409 > usb usb2: udev 1, busnum 2, minor = 128 > usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 > usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > usb usb2: Product: OHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.38.2-tinycore ohci_hcd > usb usb2: SerialNumber: 0000:00:12.0 > usb usb2: usb_probe_device > usb usb2: configuration #1 chosen from 1 choice > usb usb2: adding 2-0:1.0 (config #1, interface 0) > hub 2-0:1.0: usb_probe_interface > hub 2-0:1.0: usb_probe_interface - got id > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 5 ports detected > hub 2-0:1.0: standalone hub > hub 2-0:1.0: no power switching (usb 1.0) > hub 2-0:1.0: no over-current protection > hub 2-0:1.0: power on to power good time: 4ms > hub 2-0:1.0: local power source is good > hub 2-0:1.0: trying to enable port power on non-switchable hub > drivers/usb/core/inode.c: creating file '001' > uhci_hcd: USB Universal Host Controller Interface driver > xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > xhci_hcd 0000:05:00.0: setting latency timer to 64 > xhci_hcd 0000:05:00.0: xHCI Host Controller > drivers/usb/core/inode.c: creating file '003' > xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 > xhci_hcd 0000:05:00.0: xHCI capability registers at f8060000: > xhci_hcd 0000:05:00.0: CAPLENGTH AND HCIVERSION 0x960020: > xhci_hcd 0000:05:00.0: CAPLENGTH: 0x20 > xhci_hcd 0000:05:00.0: HCIVERSION: 0x96 > xhci_hcd 0000:05:00.0: HCSPARAMS 1: 0x4000840 > xhci_hcd 0000:05:00.0: Max device slots: 64 > xhci_hcd 0000:05:00.0: Max interrupters: 8 > xhci_hcd 0000:05:00.0: Max ports: 4 > xhci_hcd 0000:05:00.0: HCSPARAMS 2: 0xc0000f1 > xhci_hcd 0000:05:00.0: Isoc scheduling threshold: 1 > xhci_hcd 0000:05:00.0: Maximum allowed segments in event ring: 15 > xhci_hcd 0000:05:00.0: HCSPARAMS 3 0x7ff000a: > xhci_hcd 0000:05:00.0: Worst case U1 device exit latency: 10 > xhci_hcd 0000:05:00.0: Worst case U2 device exit latency: 2047 > xhci_hcd 0000:05:00.0: HCC PARAMS 0x270f06d: > xhci_hcd 0000:05:00.0: HC generates 64 bit addresses > xhci_hcd 0000:05:00.0: FIXME: more HCCPARAMS debugging > xhci_hcd 0000:05:00.0: RTSOFF 0x4a0: > xhci_hcd 0000:05:00.0: xHCI operational registers at f8060020: > xhci_hcd 0000:05:00.0: USBCMD 0x0: > xhci_hcd 0000:05:00.0: HC is being stopped > xhci_hcd 0000:05:00.0: HC has finished hard reset > xhci_hcd 0000:05:00.0: Event Interrupts disabled > xhci_hcd 0000:05:00.0: Host System Error Interrupts disabled > xhci_hcd 0000:05:00.0: HC has finished light reset > xhci_hcd 0000:05:00.0: USBSTS 0x0: > xhci_hcd 0000:05:00.0: Event ring is empty > xhci_hcd 0000:05:00.0: No Host System Error > xhci_hcd 0000:05:00.0: HC is running > xhci_hcd 0000:05:00.0: f8060420 port status reg = 0x2a0 > xhci_hcd 0000:05:00.0: f8060424 port power reg = 0x0 > xhci_hcd 0000:05:00.0: f8060428 port link reg = 0x0 > xhci_hcd 0000:05:00.0: f806042c port reserved reg = 0x0 > xhci_hcd 0000:05:00.0: f8060430 port status reg = 0xa03 > xhci_hcd 0000:05:00.0: f8060434 port power reg = 0x0 > xhci_hcd 0000:05:00.0: f8060438 port link reg = 0x0 > xhci_hcd 0000:05:00.0: f806043c port reserved reg = 0x0 > xhci_hcd 0000:05:00.0: f8060440 port status reg = 0x2a0 > xhci_hcd 0000:05:00.0: f8060444 port power reg = 0x0 > xhci_hcd 0000:05:00.0: f8060448 port link reg = 0x0 > xhci_hcd 0000:05:00.0: f806044c port reserved reg = 0x0 > xhci_hcd 0000:05:00.0: f8060450 port status reg = 0x2a0 > xhci_hcd 0000:05:00.0: f8060454 port power reg = 0x0 > xhci_hcd 0000:05:00.0: f8060458 port link reg = 0x0 > xhci_hcd 0000:05:00.0: f806045c port reserved reg = 0x0 > xhci_hcd 0000:05:00.0: // Halt the HC > xhci_hcd 0000:05:00.0: `MEM_WRITE_DWORD(3'b000, 32'hf8060020, 32'h0, 4'hf); > xhci_hcd 0000:05:00.0: can't setup > xhci_hcd 0000:05:00.0: USB bus 3 deregistered > xhci_hcd 0000:05:00.0: PCI INT A disabled > xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110 > xhci_hcd: probe of 0000:05:00.0 failed with error -110 > driver u132_hcd built at 13:33:26 on Jul 11 2012 > usbcore: registered new interface driver usblp > usbcore: registered new interface driver cdc_wdm > Initializing USB Mass Storage driver... > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > usbcore: registered new interface driver ums-sddr09 > usbcore: registered new interface driver ums-sddr55 > usbcore: registered new interface driver usbserial > USB Serial support registered for generic > usbcore: registered new interface driver usbserial_generic > usbserial: USB Serial Driver core > USB Serial support registered for aircable > usbcore: registered new interface driver aircable > USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter > usbcore: registered new interface driver belkin > belkin_sa: v1.3:USB Belkin Serial converter driver > USB Serial support registered for cp210x > usbcore: registered new interface driver cp210x > cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver > USB Serial support registered for DeLorme Earthmate USB > USB Serial support registered for HID->COM RS232 Adapter > USB Serial support registered for Nokia CA-42 V2 Adapter > usbcore: registered new interface driver cypress > cypress_m8: v1.10:Cypress USB to Serial Driver > USB Serial support registered for FTDI USB Serial Device > usbcore: registered new interface driver ftdi_sio > ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver > USB Serial support registered for Keyspan - (without firmware) > USB Serial support registered for Keyspan 1 port adapter > USB Serial support registered for Keyspan 2 port adapter > USB Serial support registered for Keyspan 4 port adapter > usbcore: registered new interface driver keyspan > keyspan: v1.1.5:Keyspan USB to Serial Converter Driver > USB Serial support registered for pl2303 > usbcore: registered new interface driver pl2303 > pl2303: Prolific PL2303 USB to serial adaptor driver > USB Serial support registered for SPCP8x5 > usbcore: registered new interface driver spcp8x5 > spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver > USB Serial support registered for TI USB 3410 1 port adapter > USB Serial support registered for TI USB 5052 2 port adapter > usbcore: registered new interface driver ti_usb_3410_5052 > ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver > driver ftdi-elan built at 13:33:28 on Jul 11 2012 > usbcore: registered new interface driver ftdi-elan > i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mousedev: PS/2 mouse device common for all mice > input: PC Speaker as /devices/platform/pcspkr/input/input0 > rtc_cmos 00:07: RTC can wake from S4 > rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs > cpuidle: using governor ladder > cpuidle: using governor menu > sdhci: Secure Digital Host Controller Interface driver > sdhci: Copyright(c) Pierre Ossman > wbsd: Winbond W83L51xD SD/MMC card interface driver > wbsd: Copyright(c) Pierre Ossman > padlock_aes: VIA PadLock not detected. > padlock_sha: VIA PadLock Hash Engine not detected. > usbcore: registered new interface driver usbhid > usbhid: USB HID core driver > TCP cubic registered > NET: Registered protocol family 17 > NET: Registered protocol family 15 > lib80211: common routines for IEEE802.11 drivers > lib80211_crypt: registered algorithm 'NULL' > lib80211_crypt: registered algorithm 'WEP' > lib80211_crypt: registered algorithm 'CCMP' > lib80211_crypt: registered algorithm 'TKIP' > Using IPI No-Shortcut mode > rtc_cmos 00:07: setting system clock to 2012-07-11 21:48:12 UTC (1342043292) > input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input1 > hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 > hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: CFA: 1GB ATA Flash Disk, AD B61FK, max UDMA/66 > ata1.00: 2001888 sectors, multi 0: LBA > ata1.00: configured for UDMA/66 > scsi 0:0:0:0: Direct-Access ATA 1GB ATA Flash Di AD B PQ: 0 ANSI: 5 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > sd 0:0:0:0: [sda] 2001888 512-byte logical blocks: (1.02 GB/977 MiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 > sd 0:0:0:0: [sda] Attached SCSI disk > Freeing unused kernel memory: 348k freed > ohci_hcd 0000:00:12.0: auto-stop root hub > udevd (84): /proc/84/oom_adj is deprecated, please use > /proc/84/oom_score_adj instead. > EXT3-fs: barriers not enabled > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda1): using internal journal > EXT3-fs (sda1): mounted filesystem with writeback data mode > EXT3-fs: barriers not enabled > kjournald starting. Commit interval 5 seconds > EXT3-fs (sda1): using internal journal > EXT3-fs (sda1): mounted filesystem with writeback data mode > tg3 0000:04:00.0: irq 40 for MSI/MSI-X > tg3 0000:04:00.0: irq 41 for MSI/MSI-X > tg3 0000:04:00.0: irq 42 for MSI/MSI-X > tg3 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex > tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX > hsetroot[2820]: segfault at 88 ip 08049cb4 sp bfba35e0 error 4 in > hsetroot[8048000+4000] > > Sorry to reply to my own message but upon closer inspection, it would appear that my dmesg output above is truncated. I've turned on syslog to capture the whole dmesg ring (including some interesting PCI timeout message...that timeout only occurs if i have something plugged into the USB3 port). Anyways here's the (complete) dmesg now: Jul 11 22:53:15 (none) user.notice kernel: klogd started: BusyBox v1.14.3 (2009-11-14 10:19:18 PST) Jul 11 22:53:15 (none) user.info kernel: BIOS-provided physical RAM map: Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000000100000 - 0000000066028000 (usable) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066028000 - 000000006606b000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 000000006606b000 - 0000000066079000 (ACPI data) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066079000 - 00000000662ac000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000662ac000 - 00000000662b8000 (usable) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000662b8000 - 00000000662b9000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000662b9000 - 00000000662dd000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000662dd000 - 00000000662ff000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000662ff000 - 000000006638b000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 000000006638b000 - 0000000066391000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066391000 - 0000000066392000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066392000 - 0000000066399000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066399000 - 00000000663ac000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000663ac000 - 00000000663ef000 (ACPI NVS) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000663ef000 - 0000000066679000 (usable) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 0000000066679000 - 00000000667f4000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000667f4000 - 0000000066800000 (usable) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) Jul 11 22:53:15 (none) user.info kernel: BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) Jul 11 22:53:15 (none) user.notice kernel: Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jul 11 22:53:15 (none) user.info kernel: DMI 2.7 present. Jul 11 22:53:15 (none) user.debug kernel: DMI: Hewlett-Packard HP t610 WW Slim Thin Client/17E2, BIOS K30 v00.13 01/10/2012 Jul 11 22:53:15 (none) user.debug kernel: e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Jul 11 22:53:15 (none) user.debug kernel: e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Jul 11 22:53:15 (none) user.info kernel: last_pfn = 0x66800 max_arch_pfn = 0x100000 Jul 11 22:53:15 (none) user.debug kernel: MTRR default type: uncachable Jul 11 22:53:15 (none) user.debug kernel: MTRR fixed ranges enabled: Jul 11 22:53:15 (none) user.debug kernel: 00000-9FFFF write-back Jul 11 22:53:15 (none) user.debug kernel: A0000-BFFFF write-through Jul 11 22:53:15 (none) user.debug kernel: C0000-D2FFF write-protect Jul 11 22:53:15 (none) user.debug kernel: D3000-E3FFF uncachable Jul 11 22:53:15 (none) user.debug kernel: E4000-EFFFF write-back Jul 11 22:53:15 (none) user.debug kernel: F0000-FFFFF write-protect Jul 11 22:53:15 (none) user.debug kernel: MTRR variable ranges enabled: Jul 11 22:53:15 (none) user.debug kernel: 0 base 000000000 mask FC0000000 write-back Jul 11 22:53:15 (none) user.debug kernel: 1 base 040000000 mask FE0000000 write-back Jul 11 22:53:15 (none) user.debug kernel: 2 base 060000000 mask FFC000000 write-back Jul 11 22:53:15 (none) user.debug kernel: 3 base 064000000 mask FFE000000 write-back Jul 11 22:53:15 (none) user.debug kernel: 4 base 066000000 mask FFF800000 write-back Jul 11 22:53:15 (none) user.debug kernel: 5 disabled Jul 11 22:53:15 (none) user.debug kernel: 6 disabled Jul 11 22:53:15 (none) user.debug kernel: 7 disabled Jul 11 22:53:15 (none) user.info kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Jul 11 22:53:15 (none) user.info kernel: found SMP MP-table at [c00f4b60] f4b60 Jul 11 22:53:15 (none) user.debug kernel: initial memory mapped : 0 - 00c00000 Jul 11 22:53:15 (none) user.info kernel: init_memory_mapping: 0000000000000000-00000000377fe000 Jul 11 22:53:15 (none) user.debug kernel: 0000000000 - 0000400000 page 4k Jul 11 22:53:15 (none) user.debug kernel: 0000400000 - 0037400000 page 2M Jul 11 22:53:15 (none) user.debug kernel: 0037400000 - 00377fe000 page 4k Jul 11 22:53:15 (none) user.debug kernel: kernel direct mapping tables up to 377fe000 @ bfb000-c00000 Jul 11 22:53:15 (none) user.info kernel: RAMDISK: 5b700000 - 609ac000 Jul 11 22:53:15 (none) user.info kernel: Allocated new RAMDISK: 32552000 - 377fd13c Jul 11 22:53:15 (none) user.info kernel: Move RAMDISK from 000000005b700000 - 00000000609ab13b to 32552000 - 377fd13b Jul 11 22:53:15 (none) user.warn kernel: ACPI: RSDP 000fe740 00024 (v02 HPQOEM) Jul 11 22:53:15 (none) user.warn kernel: ACPI: XSDT 6606b078 0006C (v01 HPQOEM SLIC-BPC 20120110 AMI 00010013) Jul 11 22:53:15 (none) user.warn kernel: ACPI: FACP 66071200 000F4 (v04 HPQOEM SLIC-BPC 20120110 AMI 00010013) Jul 11 22:53:15 (none) user.warn kernel: ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110112/tbfadt-557) Jul 11 22:53:15 (none) user.warn kernel: ACPI: DSDT 6606b170 0608B (v02 HPQOEM SLIC-BPC 00000000 INTL 20051117) Jul 11 22:53:15 (none) user.warn kernel: ACPI: FACS 66398f80 00040 Jul 11 22:53:15 (none) user.warn kernel: ACPI: APIC 660712f8 00062 (v03 HPQOEM SLIC-BPC 20120110 AMI 00010013) Jul 11 22:53:15 (none) user.warn kernel: ACPI: MCFG 66071360 0003C (v01 HPQOEM SLIC-BPC 20120110 MSFT 00010013) Jul 11 22:53:15 (none) user.warn kernel: ACPI: HPET 660713a0 00038 (v01 HPQOEM SLIC-BPC 20120110 AMI 00000004) Jul 11 22:53:15 (none) user.warn kernel: ACPI: SSDT 660713d8 05270 (v01 COMPAQ WMI 00000001 MSFT 03000001) Jul 11 22:53:15 (none) user.warn kernel: ACPI: TCPA 66076648 00032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013) Jul 11 22:53:15 (none) user.warn kernel: ACPI: BGRT 66076680 0003C (v00 HPQOEM SLIC-BPC 20120110 AMI 00010013) Jul 11 22:53:15 (none) user.warn kernel: ACPI: SSDT 660766c0 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) Jul 11 22:53:15 (none) user.warn kernel: ACPI: SSDT 66076aa0 0168E (v02 AMD ALIB 00000001 MSFT 04000000) Jul 11 22:53:15 (none) user.debug kernel: ACPI: Local APIC address 0xfee00000 Jul 11 22:53:15 (none) user.notice kernel: 752MB HIGHMEM available. Jul 11 22:53:15 (none) user.notice kernel: 887MB LOWMEM available. Jul 11 22:53:15 (none) user.info kernel: mapped low ram: 0 - 377fe000 Jul 11 22:53:15 (none) user.info kernel: low ram: 0 - 377fe000 Jul 11 22:53:15 (none) user.warn kernel: Zone PFN ranges: Jul 11 22:53:15 (none) user.warn kernel: DMA 0x00000010 -> 0x00001000 Jul 11 22:53:15 (none) user.warn kernel: Normal 0x00001000 -> 0x000377fe Jul 11 22:53:15 (none) user.warn kernel: HighMem 0x000377fe -> 0x00066800 Jul 11 22:53:15 (none) user.warn kernel: Movable zone start PFN for each node Jul 11 22:53:15 (none) user.warn kernel: early_node_map[5] active PFN ranges Jul 11 22:53:15 (none) user.warn kernel: 0: 0x00000010 -> 0x0000009e Jul 11 22:53:15 (none) user.warn kernel: 0: 0x00000100 -> 0x00066028 Jul 11 22:53:15 (none) user.warn kernel: 0: 0x000662ac -> 0x000662b8 Jul 11 22:53:15 (none) user.warn kernel: 0: 0x000663ef -> 0x00066679 Jul 11 22:53:15 (none) user.warn kernel: 0: 0x000667f4 -> 0x00066800 Jul 11 22:53:15 (none) user.debug kernel: On node 0 totalpages: 418392 Jul 11 22:53:15 (none) user.debug kernel: free_area_init_node: node 0, pgdat c06d73c0, node_mem_map f1881200 Jul 11 22:53:15 (none) user.debug kernel: DMA zone: 32 pages used for memmap Jul 11 22:53:15 (none) user.debug kernel: DMA zone: 0 pages reserved Jul 11 22:53:15 (none) user.debug kernel: DMA zone: 3950 pages, LIFO batch:0 Jul 11 22:53:15 (none) user.debug kernel: Normal zone: 1744 pages used for memmap Jul 11 22:53:15 (none) user.debug kernel: Normal zone: 221486 pages, LIFO batch:31 Jul 11 22:53:15 (none) user.debug kernel: HighMem zone: 1505 pages used for memmap Jul 11 22:53:15 (none) user.debug kernel: HighMem zone: 189675 pages, LIFO batch:31 Jul 11 22:53:15 (none) user.info kernel: Using APIC driver default Jul 11 22:53:15 (none) user.debug kernel: ACPI: Local APIC address 0xfee00000 Jul 11 22:53:15 (none) user.info kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Jul 11 22:53:15 (none) user.info kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Jul 11 22:53:15 (none) user.info kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Jul 11 22:53:15 (none) user.info kernel: ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0]) Jul 11 22:53:15 (none) user.info kernel: IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23 Jul 11 22:53:15 (none) user.info kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Jul 11 22:53:15 (none) user.info kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Jul 11 22:53:15 (none) user.debug kernel: ACPI: IRQ0 used by override. Jul 11 22:53:15 (none) user.debug kernel: ACPI: IRQ2 used by override. Jul 11 22:53:15 (none) user.debug kernel: ACPI: IRQ9 used by override. Jul 11 22:53:15 (none) user.info kernel: Using ACPI (MADT) for SMP configuration information Jul 11 22:53:15 (none) user.info kernel: ACPI: HPET id: 0xffffffff base: 0xfed00000 Jul 11 22:53:15 (none) user.info kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs Jul 11 22:53:15 (none) user.debug kernel: nr_irqs_gsi: 40 Jul 11 22:53:15 (none) user.info kernel: Allocating PCI resources starting at 66800000 (gap: 66800000:98400000) Jul 11 22:53:15 (none) user.info kernel: setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 Jul 11 22:53:15 (none) user.info kernel: PERCPU: Embedded 12 pages/cpu @f1400000 s24960 r0 d24192 u2097152 Jul 11 22:53:15 (none) user.debug kernel: pcpu-alloc: s24960 r0 d24192 u2097152 alloc=1*4194304 Jul 11 22:53:15 (none) user.debug kernel: pcpu-alloc: [0] 0 1 Jul 11 22:53:15 (none) user.warn kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 415111 Jul 11 22:53:15 (none) user.notice kernel: Kernel command line: max_loop=254 showapps desktop=jwm whid=rno1 cron syslog kmap=us mac=None usewlan=1 initrd=http://10.10.10.20/tinycore-amzn/ramdisk.rgz Jul 11 22:53:15 (none) user.info kernel: PID hash table entries: 4096 (order: 2, 16384 bytes) Jul 11 22:53:15 (none) user.info kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Jul 11 22:53:15 (none) user.info kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Jul 11 22:53:15 (none) user.info kernel: Initializing CPU#0 Jul 11 22:53:15 (none) user.info kernel: Initializing HighMem for node 0 (000377fe:00066800) Jul 11 22:53:15 (none) user.info kernel: Memory: 1567240k/1679360k available (4065k kernel code, 106328k reserved, 1940k data, 348k init, 764720k highmem) Jul 11 22:53:15 (none) user.info kernel: virtual kernel memory layout: Jul 11 22:53:15 (none) user.info kernel: fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) Jul 11 22:53:15 (none) user.info kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB) Jul 11 22:53:15 (none) user.info kernel: vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Jul 11 22:53:15 (none) user.info kernel: lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Jul 11 22:53:15 (none) user.info kernel: .init : 0xc06de000 - 0xc0735000 ( 348 kB) Jul 11 22:53:15 (none) user.info kernel: .data : 0xc04f85a0 - 0xc06dd840 (1940 kB) Jul 11 22:53:15 (none) user.info kernel: .text : 0xc0100000 - 0xc04f85a0 (4065 kB) Jul 11 22:53:15 (none) user.info kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok. Jul 11 22:53:15 (none) user.info kernel: Hierarchical RCU implementation. Jul 11 22:53:15 (none) user.info kernel: RCU-based detection of stalled CPUs is disabled. Jul 11 22:53:15 (none) user.info kernel: NR_IRQS:512 Jul 11 22:53:15 (none) user.debug kernel: CPU 0 irqstacks, hard=f1008000 soft=f100a000 Jul 11 22:53:15 (none) user.info kernel: Extended CMOS year: 2000 Jul 11 22:53:15 (none) user.warn kernel: Console: colour VGA+ 80x25 Jul 11 22:53:15 (none) user.info kernel: console [tty0] enabled Jul 11 22:53:15 (none) user.debug kernel: hpet clockevent registered Jul 11 22:53:15 (none) user.warn kernel: Fast TSC calibration using PIT Jul 11 22:53:15 (none) user.warn kernel: Detected 1646.238 MHz processor. Jul 11 22:53:15 (none) user.info kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3293.66 BogoMIPS (lpj=5487460) Jul 11 22:53:15 (none) user.info kernel: pid_max: default: 32768 minimum: 301 Jul 11 22:53:15 (none) user.warn kernel: Mount-cache hash table entries: 512 Jul 11 22:53:15 (none) user.info kernel: CPU: Physical Processor ID: 0 Jul 11 22:53:15 (none) user.info kernel: CPU: Processor Core ID: 0 Jul 11 22:53:15 (none) user.info kernel: ACPI: Core revision 20110112 Jul 11 22:53:15 (none) user.info kernel: Enabling APIC mode: Flat. Using 1 I/O APICs Jul 11 22:53:15 (none) user.info kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Jul 11 22:53:15 (none) user.info kernel: CPU0: AMD G-T56N Processor stepping 00 Jul 11 22:53:15 (none) user.info kernel: Performance Events: AMD PMU driver. Jul 11 22:53:15 (none) user.info kernel: ... version: 0 Jul 11 22:53:15 (none) user.info kernel: ... bit width: 48 Jul 11 22:53:15 (none) user.info kernel: ... generic registers: 4 Jul 11 22:53:15 (none) user.info kernel: ... value mask: 0000ffffffffffff Jul 11 22:53:15 (none) user.info kernel: ... max period: 00007fffffffffff Jul 11 22:53:15 (none) user.info kernel: ... fixed-purpose events: 0 Jul 11 22:53:15 (none) user.info kernel: ... event mask: 000000000000000f Jul 11 22:53:15 (none) user.debug kernel: CPU 1 irqstacks, hard=f1092000 soft=f1094000 Jul 11 22:53:15 (none) user.info kernel: Booting Node 0, Processors #1 Ok. Jul 11 22:53:15 (none) user.info kernel: Initializing CPU#1 Jul 11 22:53:15 (none) user.info kernel: Brought up 2 CPUs Jul 11 22:53:15 (none) user.info kernel: Total of 2 processors activated (6588.93 BogoMIPS). Jul 11 22:53:15 (none) user.info kernel: NET: Registered protocol family 16 Jul 11 22:53:15 (none) user.info kernel: Extended Config Space enabled on 0 nodes Jul 11 22:53:15 (none) user.info kernel: ACPI: bus type pci registered Jul 11 22:53:15 (none) user.info kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 11 22:53:15 (none) user.info kernel: PCI: not using MMCONFIG Jul 11 22:53:15 (none) user.info kernel: PCI: PCI BIOS revision 3.00 entry at 0xeb0a0, last bus=254 Jul 11 22:53:15 (none) user.info kernel: PCI: Using configuration type 1 for base access Jul 11 22:53:15 (none) user.info kernel: PCI: Using configuration type 1 for extended access Jul 11 22:53:15 (none) user.warn kernel: mtrr: your CPUs had inconsistent fixed MTRR settings Jul 11 22:53:15 (none) user.info kernel: mtrr: probably your BIOS does not setup all CPUs. Jul 11 22:53:15 (none) user.info kernel: mtrr: corrected configuration. Jul 11 22:53:15 (none) user.warn kernel: bio: create slab <bio-0> at 0 Jul 11 22:53:15 (none) user.debug kernel: ACPI: EC: Look up EC in DSDT Jul 11 22:53:15 (none) user.warn kernel: ACPI: Executed 2 blocks of module-level executable AML code Jul 11 22:53:15 (none) user.info kernel: ACPI: Interpreter enabled Jul 11 22:53:15 (none) user.info kernel: ACPI: (supports S0 S5) Jul 11 22:53:15 (none) user.info kernel: ACPI: Using IOAPIC for interrupt routing Jul 11 22:53:15 (none) user.info kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) Jul 11 22:53:15 (none) user.info kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources Jul 11 22:53:15 (none) user.info kernel: PCI: Using MMCONFIG for extended config space Jul 11 22:53:15 (none) user.info kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] Jul 11 22:53:15 (none) user.info kernel: pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:00.0: [1022:1510] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: [1002:9806] type 0 class 0x000300 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.1: [1002:1314] type 0 class 0x000403 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.1: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:11.0: reg 24: [mem 0xfeb4a000-0xfeb4a3ff] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:11.0: set SATA to AHCI mode Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.0: reg 10: [mem 0xfeb49000-0xfeb49fff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.2: reg 10: [mem 0xfeb48000-0xfeb480ff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.2: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:12.2: PME# disabled Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.2: PME# supported from D0 D3hot D3cold Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.2: PME# disabled Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode) Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: PCI bridge to [bus 02-02] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: bridge window [io 0xfff000-0x0000] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:03:00.0: [14e4:4359] type 0 class 0x000280 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:03:00.0: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:03:00.0: PME# supported from D0 D3hot D3cold Jul 11 22:53:15 (none) user.debug kernel: pci 0000:03:00.0: PME# disabled Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: PCI bridge to [bus 03-03] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: bridge window [io 0xfff000-0x0000] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: [14e4:16b1] type 0 class 0x000200 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: reg 10: [mem 0xd0010000-0xd001ffff 64bit pref] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: reg 18: [mem 0xd0000000-0xd000ffff 64bit pref] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: reg 30: [mem 0xfe900000-0xfe9007ff pref] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: PME# supported from D0 D3hot D3cold Jul 11 22:53:15 (none) user.debug kernel: pci 0000:04:00.0: PME# disabled Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: PCI bridge to [bus 04-04] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: bridge window [io 0xfff000-0x0000] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: [104c:8241] type 0 class 0x000c03 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: reg 10: [mem 0xfe800000-0xfe80ffff 64bit] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: reg 18: [mem 0xfe810000-0xfe811fff 64bit] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: supports D1 D2 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold Jul 11 22:53:15 (none) user.debug kernel: pci 0000:05:00.0: PME# disabled Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: PCI bridge to [bus 05-05] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: bridge window [io 0xfff000-0x0000] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff] Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: on NUMA node 0 Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT] Jul 11 22:53:15 (none) user.debug kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT] Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 Jul 11 22:53:15 (none) user.info kernel: vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none Jul 11 22:53:15 (none) user.info kernel: vgaarb: loaded Jul 11 22:53:15 (none) user.notice kernel: SCSI subsystem initialized Jul 11 22:53:15 (none) user.debug kernel: libata version 3.00 loaded. Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usbfs Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver hub Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new device driver usb Jul 11 22:53:15 (none) user.info kernel: PCI: Using ACPI for IRQ routing Jul 11 22:53:15 (none) user.debug kernel: PCI: pci_cache_line_size set to 64 bytes Jul 11 22:53:15 (none) user.debug kernel: reserve RAM buffer: 000000000009e800 - 000000000009ffff Jul 11 22:53:15 (none) user.debug kernel: reserve RAM buffer: 0000000066028000 - 0000000067ffffff Jul 11 22:53:15 (none) user.debug kernel: reserve RAM buffer: 00000000662b8000 - 0000000067ffffff Jul 11 22:53:15 (none) user.debug kernel: reserve RAM buffer: 0000000066679000 - 0000000067ffffff Jul 11 22:53:15 (none) user.debug kernel: reserve RAM buffer: 0000000066800000 - 0000000067ffffff Jul 11 22:53:15 (none) user.info kernel: cfg80211: Calling CRDA to update world regulatory domain Jul 11 22:53:15 (none) user.info kernel: Switching to clocksource hpet Jul 11 22:53:15 (none) user.info kernel: pnp: PnP ACPI init Jul 11 22:53:15 (none) user.info kernel: ACPI: bus type pnp registered Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [bus 00-ff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [io 0x0cf8-0x0cff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [io 0x0000-0x03af window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [io 0x03e0-0x0cf7 window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [io 0x03b0-0x03df window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [io 0x0d00-0xffff window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [mem 0x000a0000-0x000bffff window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [mem 0x000c0000-0x000dffff window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [mem 0x7f000000-0xffffffff window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: [mem 0x00000000 window] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:01: [mem 0xe0000000-0xefffffff] Jul 11 22:53:15 (none) user.info kernel: system 00:01: [mem 0xe0000000-0xefffffff] has been reserved Jul 11 22:53:15 (none) user.debug kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x040b] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x04d6] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c00-0x0c01] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c14] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c50-0x0c51] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c52] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c6c] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0c6f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0cd0-0x0cd1] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0cd2-0x0cd3] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0cd4-0x0cd5] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0cd6-0x0cd7] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0cd8-0x0cdf] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0800-0x089f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0000-0xffffffff disabled] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0000-0x000f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0920-0x093f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0900-0x090f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0910-0x091f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0xfe00-0xfefe] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0060-0x005f disabled] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [io 0x0064-0x0063 disabled] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfec00000-0xfec00fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfee00000-0xfee00fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfed80000-0xfed8ffff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfed61000-0xfed70fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfec10000-0xfec10fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xfed00000-0xfed00fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:02: [mem 0xffc00000-0xffffffff] Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x040b] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x04d6] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c00-0x0c01] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c14] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c50-0x0c51] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c52] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c6c] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0c6f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0cd0-0x0cd1] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0cd2-0x0cd3] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0cd4-0x0cd5] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0cd6-0x0cd7] has been reserved Jul 11 22:53:15 (none) user.info kernel: Switched to NOHz mode on CPU #0 Jul 11 22:53:15 (none) user.info kernel: Switched to NOHz mode on CPU #1 Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0cd8-0x0cdf] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0800-0x089f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0920-0x093f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0900-0x090f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0x0910-0x091f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [io 0xfe00-0xfefe] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:02: [mem 0xffc00000-0xffffffff] has been reserved Jul 11 22:53:15 (none) user.debug kernel: system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:03: [io 0x0000-0xffffffff disabled] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:03: [io 0x0b20-0x0b3f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:03: [io 0x0a00-0x0afe] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:03: [io 0x0b10-0x0b1f] Jul 11 22:53:15 (none) user.info kernel: system 00:03: [io 0x0b20-0x0b3f] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:03: [io 0x0a00-0x0afe] has been reserved Jul 11 22:53:15 (none) user.info kernel: system 00:03: [io 0x0b10-0x0b1f] has been reserved Jul 11 22:53:15 (none) user.debug kernel: system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:04: [io 0x0060] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:04: [io 0x0064] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:04: [irq 1] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:05: [irq 12] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [dma 4] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x0000-0x000f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x0081-0x0083] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x0087] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x0089-0x008b] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x008f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: [io 0x00c0-0x00df] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:07: [io 0x0070-0x0071] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:07: [irq 8] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:08: [io 0x0061] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0010-0x001f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0022-0x003f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0044-0x005f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0062-0x0063] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0065-0x006f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0072-0x007f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0080] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0084-0x0086] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0088] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x008c-0x008e] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x0090-0x009f] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x00a2-0x00bf] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x00e0-0x00ef] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:09: [io 0x04d0-0x04d1] Jul 11 22:53:15 (none) user.info kernel: system 00:09: [io 0x04d0-0x04d1] has been reserved Jul 11 22:53:15 (none) user.debug kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0a: [io 0x00f0-0x00ff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0a: [irq 13] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0b: [io 0x03f8-0x03ff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0b: [irq 4] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0b: [dma 0 disabled] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active) Jul 11 22:53:15 (none) user.debug kernel: system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0d: [mem 0xfed40000-0xfed44fff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0e: [mem 0x67000000-0x7effffff] Jul 11 22:53:15 (none) user.info kernel: system 00:0e: [mem 0x67000000-0x7effffff] could not be reserved Jul 11 22:53:15 (none) user.debug kernel: system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0f: [mem 0xfed00000-0xfed003ff] Jul 11 22:53:15 (none) user.debug kernel: pnp 00:0f: Plug and Play ACPI device, IDs PNP0103 (active) Jul 11 22:53:15 (none) user.info kernel: pnp: PnP ACPI: found 16 devices Jul 11 22:53:15 (none) user.info kernel: ACPI: ACPI bus type pnp unregistered Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:14.4: PCI bridge to [bus 01-01] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:14.4: bridge window [io disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:14.4: bridge window [mem disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:14.4: bridge window [mem pref disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: PCI bridge to [bus 02-02] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: bridge window [io disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: bridge window [mem disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: bridge window [mem pref disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: PCI bridge to [bus 03-03] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: bridge window [io disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: bridge window [mem 0xfea00000-0xfeafffff] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: bridge window [mem pref disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: PCI bridge to [bus 04-04] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: bridge window [io disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: bridge window [mem 0xd0000000-0xd00fffff 64bit pref] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: PCI bridge to [bus 05-05] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: bridge window [io disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: bridge window [mem pref disabled] Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.0: setting latency timer to 64 Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.1: setting latency timer to 64 Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.2: setting latency timer to 64 Jul 11 22:53:15 (none) user.info kernel: pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:15.3: setting latency timer to 64 Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x03af] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 6 [io 0x03b0-0x03df] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 7 [io 0x0d00-0xffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:00: resource 10 [mem 0x7f000000-0xffffffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 4 [io 0x0000-0x03af] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 6 [io 0x03b0-0x03df] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 7 [io 0x0d00-0xffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:01: resource 10 [mem 0x7f000000-0xffffffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref] Jul 11 22:53:15 (none) user.debug kernel: pci_bus 0000:05: resource 1 [mem 0xfe800000-0xfe8fffff] Jul 11 22:53:15 (none) user.info kernel: NET: Registered protocol family 2 Jul 11 22:53:15 (none) user.info kernel: IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Jul 11 22:53:15 (none) user.info kernel: TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Jul 11 22:53:15 (none) user.info kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Jul 11 22:53:15 (none) user.info kernel: TCP: Hash tables configured (established 131072 bind 65536) Jul 11 22:53:15 (none) user.info kernel: TCP reno registered Jul 11 22:53:15 (none) user.info kernel: UDP hash table entries: 512 (order: 2, 16384 bytes) Jul 11 22:53:15 (none) user.info kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Jul 11 22:53:15 (none) user.info kernel: NET: Registered protocol family 1 Jul 11 22:53:15 (none) user.debug kernel: pci 0000:00:01.0: Boot video device Jul 11 22:53:15 (none) user.warn kernel: pci 0000:05:00.0: xHCI HW did not halt within 2000 usec status = 0x0 Jul 11 22:53:15 (none) user.debug kernel: PCI: CLS 64 bytes, default 64 Jul 11 22:53:15 (none) user.info kernel: Trying to unpack rootfs image as initramfs... Jul 11 22:53:15 (none) user.info kernel: Freeing initrd memory: 84656k freed Jul 11 22:53:15 (none) user.info kernel: microcode: CPU0: patch_level=0x5000101 Jul 11 22:53:15 (none) user.info kernel: microcode: CPU1: patch_level=0x5000101 Jul 11 22:53:15 (none) user.info kernel: microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba Jul 11 22:53:15 (none) user.warn kernel: highmem bounce pool size: 64 pages Jul 11 22:53:15 (none) user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher Jul 11 22:53:15 (none) user.info kernel: fuse init (API version 7.16) Jul 11 22:53:15 (none) user.info kernel: msgmni has been set to 1732 Jul 11 22:53:15 (none) user.info kernel: io scheduler noop registered Jul 11 22:53:15 (none) user.info kernel: io scheduler deadline registered (default) Jul 11 22:53:15 (none) user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled Jul 11 22:53:15 (none) user.info kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jul 11 22:53:15 (none) user.info kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Jul 11 22:53:15 (none) user.info kernel: lp: driver loaded but no devices found Jul 11 22:53:15 (none) user.info kernel: Non-volatile memory driver v1.3 Jul 11 22:53:15 (none) user.info kernel: Linux agpgart interface v0.103 Jul 11 22:53:15 (none) user.info kernel: Refined TSC clocksource calibration: 1646.492 MHz. Jul 11 22:53:15 (none) user.info kernel: Switching to clocksource tsc Jul 11 22:53:15 (none) user.info kernel: floppy0: no floppy controllers found Jul 11 22:53:15 (none) user.info kernel: brd: module loaded Jul 11 22:53:15 (none) user.info kernel: loop: module loaded Jul 11 22:53:15 (none) user.info kernel: Uniform Multi-Platform E-IDE driver Jul 11 22:53:15 (none) user.info kernel: ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Jul 11 22:53:15 (none) user.debug kernel: Probing IDE interface ide0... Jul 11 22:53:15 (none) user.info kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Jul 11 22:53:15 (none) user.debug kernel: Probing IDE interface ide1... Jul 11 22:53:15 (none) user.info kernel: ide1 at 0x170-0x177,0x376 on irq 15 Jul 11 22:53:15 (none) user.info kernel: ide-gd driver 1.18 Jul 11 22:53:15 (none) user.debug kernel: ahci 0000:00:11.0: version 3.0 Jul 11 22:53:15 (none) user.info kernel: ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Jul 11 22:53:15 (none) user.info kernel: ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode Jul 11 22:53:15 (none) user.info kernel: ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part Jul 11 22:53:15 (none) user.info kernel: scsi0 : ahci Jul 11 22:53:15 (none) user.info kernel: ata1: SATA max UDMA/133 abar m1024@0xfeb4a000 port 0xfeb4a100 irq 19 Jul 11 22:53:15 (none) user.info kernel: e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI Jul 11 22:53:15 (none) user.info kernel: e1000: Copyright (c) 1999-2006 Intel Corporation. Jul 11 22:53:15 (none) user.info kernel: e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2 Jul 11 22:53:15 (none) user.info kernel: e1000e: Copyright(c) 1999 - 2011 Intel Corporation. Jul 11 22:53:15 (none) user.info kernel: Intel(R) Gigabit Ethernet Network Driver - version 2.1.0-k2 Jul 11 22:53:15 (none) user.info kernel: Copyright (c) 2007-2009 Intel Corporation. Jul 11 22:53:15 (none) user.info kernel: pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@xxxxxxxxxxxxxxxx Jul 11 22:53:15 (none) user.info kernel: e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI Jul 11 22:53:15 (none) user.info kernel: e100: Copyright(c) 1999-2006 Intel Corporation Jul 11 22:53:15 (none) user.info kernel: tg3.c:v3.116 (December 3, 2010) Jul 11 22:53:15 (none) user.info kernel: tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jul 11 22:53:15 (none) user.debug kernel: tg3 0000:04:00.0: setting latency timer to 64 Jul 11 22:53:15 (none) user.info kernel: tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM57781) rev 57785100] (PCI Express) MAC address f8:0f:41:41:e6:c5 Jul 11 22:53:15 (none) user.info kernel: tg3 0000:04:00.0: eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1]) Jul 11 22:53:15 (none) user.info kernel: tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] Jul 11 22:53:15 (none) user.info kernel: tg3 0000:04:00.0: eth0: dma_rwctrl[00000001] dma_mask[64-bit] Jul 11 22:53:15 (none) user.info kernel: sky2: driver version 1.28 Jul 11 22:53:15 (none) user.info kernel: PPP generic driver version 2.4.2 Jul 11 22:53:15 (none) user.info kernel: tun: Universal TUN/TAP device driver, 1.6 Jul 11 22:53:15 (none) user.info kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> Jul 11 22:53:15 (none) user.info kernel: pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver pegasus Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver cdc_ether Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rndis_host Jul 11 22:53:15 (none) user.info kernel: cdc_ncm: 7-Feb-2011 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver cdc_ncm Jul 11 22:53:15 (none) user.info kernel: Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ] Jul 11 22:53:15 (none) user.info kernel: Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ] Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver zd1211rw Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rtl8187 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rndis_wlan Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver zd1201 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usb8xxx Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver lbtf_usb Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rt2500usb Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rt73usb Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver rt2800usb Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ar9170usb Jul 11 22:53:15 (none) user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96 Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: EHCI Host Controller Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file 'devices' Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '001' Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: debug port 1 Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: MWI active Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: supports USB remote wakeup Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb48000 Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT Jul 11 22:53:15 (none) user.debug kernel: ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN Jul 11 22:53:15 (none) user.info kernel: ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 Jul 11 22:53:15 (none) user.debug kernel: usb usb1: default language 0x0409 Jul 11 22:53:15 (none) user.debug kernel: usb usb1: udev 1, busnum 1, minor = 0 Jul 11 22:53:15 (none) user.info kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 Jul 11 22:53:15 (none) user.info kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 11 22:53:15 (none) user.info kernel: usb usb1: Product: EHCI Host Controller Jul 11 22:53:15 (none) user.info kernel: usb usb1: Manufacturer: Linux 2.6.38.2-tinycore ehci_hcd Jul 11 22:53:15 (none) user.info kernel: usb usb1: SerialNumber: 0000:00:12.2 Jul 11 22:53:15 (none) user.debug kernel: usb usb1: usb_probe_device Jul 11 22:53:15 (none) user.debug kernel: usb usb1: configuration #1 chosen from 1 choice Jul 11 22:53:15 (none) user.debug kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0) Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: usb_probe_interface Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: usb_probe_interface - got id Jul 11 22:53:15 (none) user.info kernel: hub 1-0:1.0: USB hub found Jul 11 22:53:15 (none) user.info kernel: hub 1-0:1.0: 5 ports detected Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: standalone hub Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: no power switching (usb 1.0) Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: individual port over-current protection Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: power on to power good time: 20ms Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: local power source is good Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: trying to enable port power on non-switchable hub Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '001' Jul 11 22:53:15 (none) user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd: block sizes: ed 64 td 64 Jul 11 22:53:15 (none) user.info kernel: ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Jul 11 22:53:15 (none) user.info kernel: ohci_hcd 0000:00:12.0: OHCI Host Controller Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '002' Jul 11 22:53:15 (none) user.info kernel: ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: created debug files Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: supports USB remote wakeup Jul 11 22:53:15 (none) user.info kernel: ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb49000 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: OHCI controller state Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: hcca frame #0005 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.a 02001205 POTPGT=2 NOCP NPS NDP=5(5) Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS Jul 11 22:53:15 (none) user.debug kernel: usb usb2: default language 0x0409 Jul 11 22:53:15 (none) user.debug kernel: usb usb2: udev 1, busnum 2, minor = 128 Jul 11 22:53:15 (none) user.info kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 Jul 11 22:53:15 (none) user.info kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 Jul 11 22:53:15 (none) user.info kernel: usb usb2: Product: OHCI Host Controller Jul 11 22:53:15 (none) user.info kernel: usb usb2: Manufacturer: Linux 2.6.38.2-tinycore ohci_hcd Jul 11 22:53:15 (none) user.info kernel: usb usb2: SerialNumber: 0000:00:12.0 Jul 11 22:53:15 (none) user.debug kernel: usb usb2: usb_probe_device Jul 11 22:53:15 (none) user.debug kernel: usb usb2: configuration #1 chosen from 1 choice Jul 11 22:53:15 (none) user.debug kernel: usb usb2: adding 2-0:1.0 (config #1, interface 0) Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: usb_probe_interface Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: usb_probe_interface - got id Jul 11 22:53:15 (none) user.info kernel: hub 2-0:1.0: USB hub found Jul 11 22:53:15 (none) user.info kernel: hub 2-0:1.0: 5 ports detected Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: standalone hub Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: no power switching (usb 1.0) Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: no over-current protection Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: power on to power good time: 4ms Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: local power source is good Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: trying to enable port power on non-switchable hub Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '001' Jul 11 22:53:15 (none) user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver Jul 11 22:53:15 (none) user.info kernel: xhci_hcd 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: setting latency timer to 64 Jul 11 22:53:15 (none) user.info kernel: xhci_hcd 0000:05:00.0: xHCI Host Controller Jul 11 22:53:15 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '003' Jul 11 22:53:15 (none) user.info kernel: xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: xHCI capability registers at f8060000: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: CAPLENGTH AND HCIVERSION 0x960020: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: CAPLENGTH: 0x20 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HCIVERSION: 0x96 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HCSPARAMS 1: 0x4000840 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Max device slots: 64 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Max interrupters: 8 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Max ports: 4 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HCSPARAMS 2: 0xc0000f1 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Isoc scheduling threshold: 1 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Maximum allowed segments in event ring: 15 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HCSPARAMS 3 0x7ff000a: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Worst case U1 device exit latency: 10 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Worst case U2 device exit latency: 2047 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HCC PARAMS 0x270f06d: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HC generates 64 bit addresses Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: FIXME: more HCCPARAMS debugging Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: RTSOFF 0x4a0: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: xHCI operational registers at f8060020: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: USBCMD 0x0: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HC is being stopped Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HC has finished hard reset Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Event Interrupts disabled Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Host System Error Interrupts disabled Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HC has finished light reset Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: USBSTS 0x0: Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: Event ring is empty Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: No Host System Error Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: HC is running Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060420 port status reg = 0xa03 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060424 port power reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060428 port link reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f806042c port reserved reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060430 port status reg = 0x2a0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060434 port power reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060438 port link reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f806043c port reserved reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060440 port status reg = 0x2a0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060444 port power reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060448 port link reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f806044c port reserved reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060450 port status reg = 0x2a0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060454 port power reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f8060458 port link reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: f806045c port reserved reg = 0x0 Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: // Halt the HC Jul 11 22:53:15 (none) user.debug kernel: xhci_hcd 0000:05:00.0: `MEM_WRITE_DWORD(3'b000, 32'hf8060020, 32'h0, 4'hf); Jul 11 22:53:15 (none) user.err kernel: xhci_hcd 0000:05:00.0: can't setup Jul 11 22:53:15 (none) user.info kernel: xhci_hcd 0000:05:00.0: USB bus 3 deregistered Jul 11 22:53:15 (none) user.info kernel: xhci_hcd 0000:05:00.0: PCI INT A disabled Jul 11 22:53:15 (none) user.err kernel: xhci_hcd 0000:05:00.0: init 0000:05:00.0 fail, -110 Jul 11 22:53:15 (none) user.warn kernel: xhci_hcd: probe of 0000:05:00.0 failed with error -110 Jul 11 22:53:15 (none) user.info kernel: driver u132_hcd built at 13:33:26 on Jul 11 2012 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usblp Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver cdc_wdm Jul 11 22:53:15 (none) user.info kernel: Initializing USB Mass Storage driver... Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usb-storage Jul 11 22:53:15 (none) user.info kernel: USB Mass Storage support registered. Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ums-sddr09 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ums-sddr55 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usbserial Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for generic Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usbserial_generic Jul 11 22:53:15 (none) user.info kernel: usbserial: USB Serial Driver core Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for aircable Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver aircable Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver belkin Jul 11 22:53:15 (none) user.info kernel: belkin_sa: v1.3:USB Belkin Serial converter driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for cp210x Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver cp210x Jul 11 22:53:15 (none) user.info kernel: cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for DeLorme Earthmate USB Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for HID->COM RS232 Adapter Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Nokia CA-42 V2 Adapter Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver cypress Jul 11 22:53:15 (none) user.info kernel: cypress_m8: v1.10:Cypress USB to Serial Driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for FTDI USB Serial Device Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ftdi_sio Jul 11 22:53:15 (none) user.info kernel: ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Keyspan - (without firmware) Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Keyspan 1 port adapter Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Keyspan 2 port adapter Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for Keyspan 4 port adapter Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver keyspan Jul 11 22:53:15 (none) user.info kernel: keyspan: v1.1.5:Keyspan USB to Serial Converter Driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for pl2303 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver pl2303 Jul 11 22:53:15 (none) user.info kernel: pl2303: Prolific PL2303 USB to serial adaptor driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for SPCP8x5 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver spcp8x5 Jul 11 22:53:15 (none) user.info kernel: spcp8x5: v0.10:SPCP8x5 USB to serial adaptor driver Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for TI USB 3410 1 port adapter Jul 11 22:53:15 (none) user.info kernel: USB Serial support registered for TI USB 5052 2 port adapter Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ti_usb_3410_5052 Jul 11 22:53:15 (none) user.info kernel: ti_usb_3410_5052: v0.10:TI USB 3410/5052 Serial Driver Jul 11 22:53:15 (none) user.info kernel: driver ftdi-elan built at 13:33:28 on Jul 11 2012 Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver ftdi-elan Jul 11 22:53:15 (none) user.info kernel: i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 Jul 11 22:53:15 (none) user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 Jul 11 22:53:15 (none) user.info kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 Jul 11 22:53:15 (none) user.info kernel: mousedev: PS/2 mouse device common for all mice Jul 11 22:53:15 (none) user.info kernel: input: PC Speaker as /devices/platform/pcspkr/input/input0 Jul 11 22:53:15 (none) user.info kernel: rtc_cmos 00:07: RTC can wake from S4 Jul 11 22:53:15 (none) user.info kernel: rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 Jul 11 22:53:15 (none) user.info kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs Jul 11 22:53:15 (none) user.info kernel: cpuidle: using governor ladder Jul 11 22:53:15 (none) user.info kernel: cpuidle: using governor menu Jul 11 22:53:15 (none) user.info kernel: sdhci: Secure Digital Host Controller Interface driver Jul 11 22:53:15 (none) user.info kernel: sdhci: Copyright(c) Pierre Ossman Jul 11 22:53:15 (none) user.info kernel: wbsd: Winbond W83L51xD SD/MMC card interface driver Jul 11 22:53:15 (none) user.info kernel: wbsd: Copyright(c) Pierre Ossman Jul 11 22:53:15 (none) user.notice kernel: padlock_aes: VIA PadLock not detected. Jul 11 22:53:15 (none) user.notice kernel: padlock_sha: VIA PadLock Hash Engine not detected. Jul 11 22:53:15 (none) user.info kernel: usbcore: registered new interface driver usbhid Jul 11 22:53:15 (none) user.info kernel: usbhid: USB HID core driver Jul 11 22:53:15 (none) user.info kernel: TCP cubic registered Jul 11 22:53:15 (none) user.info kernel: NET: Registered protocol family 17 Jul 11 22:53:15 (none) user.info kernel: NET: Registered protocol family 15 Jul 11 22:53:15 (none) user.info kernel: lib80211: common routines for IEEE802.11 drivers Jul 11 22:53:15 (none) user.debug kernel: lib80211_crypt: registered algorithm 'NULL' Jul 11 22:53:15 (none) user.debug kernel: lib80211_crypt: registered algorithm 'WEP' Jul 11 22:53:15 (none) user.debug kernel: lib80211_crypt: registered algorithm 'CCMP' Jul 11 22:53:15 (none) user.debug kernel: lib80211_crypt: registered algorithm 'TKIP' Jul 11 22:53:15 (none) user.info kernel: Using IPI No-Shortcut mode Jul 11 22:53:15 (none) user.info kernel: rtc_cmos 00:07: setting system clock to 2012-07-11 22:53:13 UTC (1342047193) Jul 11 22:53:15 (none) user.info kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Jul 11 22:53:15 (none) user.debug kernel: hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0000 Jul 11 22:53:15 (none) user.debug kernel: hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 Jul 11 22:53:15 (none) user.info kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Jul 11 22:53:15 (none) user.info kernel: ata1.00: CFA: 1GB ATA Flash Disk, AD B61FK, max UDMA/66 Jul 11 22:53:15 (none) user.info kernel: ata1.00: 2001888 sectors, multi 0: LBA Jul 11 22:53:15 (none) user.info kernel: ata1.00: configured for UDMA/66 Jul 11 22:53:15 (none) user.notice kernel: scsi 0:0:0:0: Direct-Access ATA 1GB ATA Flash Di AD B PQ: 0 ANSI: 5 Jul 11 22:53:15 (none) user.notice kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Jul 11 22:53:15 (none) user.notice kernel: sd 0:0:0:0: [sda] 2001888 512-byte logical blocks: (1.02 GB/977 MiB) Jul 11 22:53:15 (none) user.notice kernel: sd 0:0:0:0: [sda] Write Protect is off Jul 11 22:53:15 (none) user.debug kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Jul 11 22:53:15 (none) user.notice kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Jul 11 22:53:15 (none) user.info kernel: sda: sda1 Jul 11 22:53:15 (none) user.notice kernel: sd 0:0:0:0: [sda] Attached SCSI disk Jul 11 22:53:15 (none) user.info kernel: Freeing unused kernel memory: 348k freed Jul 11 22:53:15 (none) user.debug kernel: ohci_hcd 0000:00:12.0: auto-stop root hub Jul 11 22:53:15 (none) user.warn kernel: udevd (84): /proc/84/oom_adj is deprecated, please use /proc/84/oom_score_adj instead. Jul 11 22:53:15 (none) user.info kernel: EXT3-fs: barriers not enabled Jul 11 22:53:15 (none) user.info kernel: kjournald starting. Commit interval 5 seconds Jul 11 22:53:15 (none) user.info kernel: EXT3-fs (sda1): using internal journal Jul 11 22:53:15 (none) user.info kernel: EXT3-fs (sda1): mounted filesystem with writeback data mode Jul 11 22:53:20 (none) user.info kernel: EXT3-fs: barriers not enabled Jul 11 22:53:20 (none) user.info kernel: kjournald starting. Commit interval 5 seconds Jul 11 22:53:20 (none) user.info kernel: EXT3-fs (sda1): using internal journal Jul 11 22:53:20 (none) user.info kernel: EXT3-fs (sda1): mounted filesystem with writeback data mode Jul 11 22:53:20 (none) user.debug kernel: tg3 0000:04:00.0: irq 40 for MSI/MSI-X Jul 11 22:53:20 (none) user.debug kernel: tg3 0000:04:00.0: irq 41 for MSI/MSI-X Jul 11 22:53:20 (none) user.debug kernel: tg3 0000:04:00.0: irq 42 for MSI/MSI-X Jul 11 22:55:00 (none) user.debug kernel: hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0008 Jul 11 22:55:00 (none) user.debug kernel: ehci_hcd 0000:00:12.2: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT Jul 11 22:55:00 (none) user.debug kernel: hub 1-0:1.0: port 3, status 0501, change 0001, 480 Mb/s Jul 11 22:55:00 (none) user.debug kernel: hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501 Jul 11 22:55:00 (none) user.debug kernel: ehci_hcd 0000:00:12.2: port 3 low speed --> companion Jul 11 22:55:00 (none) user.debug kernel: ohci_hcd 0000:00:12.0: auto-wakeup root hub Jul 11 22:55:00 (none) user.debug kernel: ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC Jul 11 22:55:00 (none) user.debug kernel: hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0008 Jul 11 22:55:00 (none) user.debug kernel: hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0008 Jul 11 22:55:00 (none) user.debug kernel: ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS Jul 11 22:55:00 (none) user.debug kernel: hub 2-0:1.0: port 3, status 0301, change 0001, 1.5 Mb/s Jul 11 22:55:00 (none) user.debug kernel: hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x301 Jul 11 22:55:00 (none) user.debug kernel: ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS Jul 11 22:55:00 (none) user.info kernel: usb 2-3: new low speed USB device using ohci_hcd and address 2 Jul 11 22:55:00 (none) user.debug kernel: ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: skipped 1 descriptor after interface Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: default language 0x0409 Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: udev 2, busnum 2, minor = 129 Jul 11 22:55:00 (none) user.info kernel: usb 2-3: New USB device found, idVendor=046d, idProduct=c00c Jul 11 22:55:00 (none) user.info kernel: usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 11 22:55:00 (none) user.info kernel: usb 2-3: Product: USB Optical Mouse Jul 11 22:55:00 (none) user.info kernel: usb 2-3: Manufacturer: Logitech Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: usb_probe_device Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: configuration #1 chosen from 1 choice Jul 11 22:55:00 (none) user.debug kernel: usb 2-3: adding 2-3:1.0 (config #1, interface 0) Jul 11 22:55:00 (none) user.debug kernel: usbserial_generic 2-3:1.0: usb_probe_interface Jul 11 22:55:00 (none) user.debug kernel: usbserial_generic 2-3:1.0: usb_probe_interface - got id Jul 11 22:55:00 (none) user.debug kernel: usbhid 2-3:1.0: usb_probe_interface Jul 11 22:55:00 (none) user.debug kernel: usbhid 2-3:1.0: usb_probe_interface - got id Jul 11 22:55:00 (none) user.info kernel: input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb2/2-3/2-3:1.0/input/input2 Jul 11 22:55:00 (none) user.info kernel: generic-usb 0003:046D:C00C.0001: input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-3/input0 Jul 11 22:55:00 (none) user.debug kernel: drivers/usb/core/inode.c: creating file '002' Jul 11 22:55:00 (none) user.debug kernel: hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0008 -- Matt -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
