Hi Sarah
Whenever I restart or coldboot, my external drive (3.5 sata in a USB3
enclosure) is not detected / initialised correctly. fdisk -l does not
show the drive at all.
I have found that I have to:
turn it off ( or disconnect the usb cable)
modprobe -r xhci_hcd
modprobe xhci_hcd
and then turn it on. It is then found and initialised.
if I leave it on and connected modprobe -r xhci_hcd & modprobe xhci_hcd
will not work but sometime if I then switch the drive enclosure it does
get picked up ,often it seems to get picked up by the wrong usb host
driver though and still fails to be initialised.
eg
[ 801.550030] usb 5-1: new full speed USB device number 2 using ohci_hcd
(I have seen ahci as well)
I have compiled the 2.6.39-rc5 with |CONFIG_USB_XHCI_HCD_DEBUGGING=y
|dmesg from boot follows and the dmesg from a failed modprobe -r
xhci_hcd & modprobe xhci_hcd with the drive connected (then switched off
and on) and then another with it disconnected which was successful once
the drive was reconnected after the modprobe xhci_hcd
I'll include lshw output as well in case this helps.
If you require anything else please let me know.
Kind regards
Lee Harris
|[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-rc5-lee (root@UPSTAIRS) (gcc version
4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Mon May 2 14:02:07 BST 2011
[ 0.000000] Command line: root=/dev/md0 ro splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000cfe90000 - 00000000cfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfea8000 - 00000000cfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer System Product Name/Crosshair IV
Formula, BIOS 1102 08/24/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfe90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to cfe90000 @ cfe8d000-cfe90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @
22fffe000-230000000
[ 0.000000] RAMDISK: 36e77000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fbed0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cfe90100 0005C (v01 082410 XSDT1804
20100824 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cfe90290 000F4 (v03 082410 FACP1804
20100824 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cfe90460 0F42B (v01 A1595 A1595000
00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cfea8000 00040
[ 0.000000] ACPI: APIC 00000000cfe90390 00088 (v01 082410 APIC1804
20100824 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cfe90420 0003C (v01 082410 OEMMCFG
20100824 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cfea8040 00072 (v01 082410 OEMB1804
20100824 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000cfe9f8b0 00108 (v01 AMD FAM_F_10 00000002
AMD 00000001)
[ 0.000000] ACPI: HPET 00000000cfe9f9c0 00038 (v01 082410 OEMHPET
20100824 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cfe9fa00 00156 (v01 A M I POWERNOW
00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x04 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 0x05 -> Node 0
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-d0000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-230000000
[ 0.000000] NUMA: Node 0 [0,a0000) + [100000,d0000000) -> [0,d0000000)
[ 0.000000] NUMA: Node 0 [0,d0000000) + [100000000,230000000) ->
[0,230000000)
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [000000022fff9000 - 000000022fffdfff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD ->
[ffff880227600000-ffff88022e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096670
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833224 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] PM: Registered nosave memory: 000000000009e000 -
000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 -
0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfe90000 -
00000000cfea8000
[ 0.000000] PM: Registered nosave memory: 00000000cfea8000 -
00000000cfed0000
[ 0.000000] PM: Registered nosave memory: 00000000cfed0000 -
00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 -
00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 -
0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap:
cff00000:2ff00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fc00000 s84992 r8192
d21504 u262144
[ 0.000000] pcpu-alloc: s84992 r8192 d21504 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 2065305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/md0 ro splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ c4000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 -
00000000c4000000
[ 0.000000] Memory: 8106260k/9175040k available (5970k kernel code,
788360k absent, 280420k reserved, 4987k data, 972k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:1272 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2809.308 MHz processor.
[ 0.000004] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5618.61 BogoMIPS (lpj=28093080)
[ 0.000165] pid_max: default: 32768 minimum: 301
[ 0.000257] Security Framework initialized
[ 0.000341] AppArmor: AppArmor initialized
[ 0.000930] Dentry cache hash table entries: 1048576 (order: 11, 8388608
bytes)
[ 0.011613] Inode-cache hash table entries: 524288 (order: 10, 4194304
bytes)
[ 0.012594] Mount-cache hash table entries: 256
[ 0.012760] Initializing cgroup subsys ns
[ 0.012839] ns_cgroup deprecated: consider using the 'clone_children'
flag without the ns_cgroup.
[ 0.012956] Initializing cgroup subsys cpuacct
[ 0.013035] Initializing cgroup subsys memory
[ 0.013118] Initializing cgroup subsys devices
[ 0.013197] Initializing cgroup subsys freezer
[ 0.013274] Initializing cgroup subsys net_cls
[ 0.013350] Initializing cgroup subsys blkio
[ 0.013432] Initializing cgroup subsys perf_event
[ 0.013527] tseg: 0000000000
[ 0.013538] CPU: Physical Processor ID: 0
[ 0.013613] CPU: Processor Core ID: 0
[ 0.013687] mce: CPU supports 6 MCE banks
[ 0.014999] ACPI: Core revision 20110316
[ 0.020011] ftrace: allocating 22678 entries in 89 pages
[ 0.030058] Setting APIC routing to flat
[ 0.030421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.132591] CPU0: AMD Phenom(tm) II X6 1055T Processor stepping 00
[ 0.140000] Performance Events: AMD PMU driver.
[ 0.140000] ... version: 0
[ 0.140000] ... bit width: 48
[ 0.140000] ... generic registers: 4
[ 0.140000] ... value mask: 0000ffffffffffff
[ 0.140000] ... max period: 00007fffffffffff
[ 0.140000] ... fixed-purpose events: 0
[ 0.140000] ... event mask: 000000000000000f
[ 0.140000] Booting Node 0, Processors #1
[ 0.140000] smpboot cpu 1: start_ip = 99000
[ 0.300047] #2
[ 0.300091] smpboot cpu 2: start_ip = 99000
[ 0.470052] #3
[ 0.470096] smpboot cpu 3: start_ip = 99000
[ 0.640068] #4
[ 0.640113] smpboot cpu 4: start_ip = 99000
[ 0.810076] #5 Ok.
[ 0.810145] smpboot cpu 5: start_ip = 99000
[ 0.980004] Brought up 6 CPUs
[ 0.980085] Total of 6 processors activated (33713.37 BogoMIPS).
[ 0.983844] devtmpfs: initialized
[ 0.983844] PM: Registering ACPI NVS region at cfea8000 (163840 bytes)
[ 0.983844] print_constraints: dummy:
[ 0.983844] Time: 15:14:36 Date: 05/02/11
[ 0.983844] NET: Registered protocol family 16
[ 0.983844] node 0 link 0: io port [1000, ffffff]
[ 0.983844] TOM: 00000000d0000000 aka 3328M
[ 0.983844] Fam 10h mmconf [e0000000, efffffff]
[ 0.983844] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.983844] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.983844] node 0 link 0: mmio [a0000, bffff]
[ 0.983844] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.983844] TOM2: 0000000230000000 aka 8960M
[ 0.983844] bus: [00, 07] on node 0 link 0
[ 0.983844] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.983844] bus: 00 index 1 [mem 0xf0000000-0xffffffff]
[ 0.983844] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.983844] bus: 00 index 3 [mem 0xd0000000-0xdfffffff]
[ 0.983844] bus: 00 index 4 [mem 0x230000000-0xfcffffffff]
[ 0.983844] Extended Config Space enabled on 1 nodes
[ 0.983844] ACPI: bus type pci registered
[ 0.983844] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.983844] PCI: not using MMCONFIG
[ 0.983844] PCI: Using configuration type 1 for base access
[ 0.983844] PCI: Using configuration type 1 for extended access
[ 0.983844] bio: create slab <bio-0> at 0
[ 0.983844] ACPI: EC: Look up EC in DSDT
[ 0.983844] ACPI: Executed 3 blocks of module-level executable AML code
[ 1.350305] ACPI: Interpreter enabled
[ 1.350387] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.350668] ACPI: Using IOAPIC for interrupt routing
[ 1.350761] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.351694] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
ACPI motherboard resources
[ 1.601376] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 1.601563] ACPI: No dock devices found.
[ 1.601640] HEST: Table not found.
[ 1.603828] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 1.604114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.604320] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 1.604403] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 1.604493] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 1.604604] pci_root PNP0A03:00: host bridge window [mem
0x000d0000-0x000dffff]
[ 1.604714] pci_root PNP0A03:00: host bridge window [mem
0xcff00000-0xdfffffff]
[ 1.604823] pci_root PNP0A03:00: host bridge window [mem
0xf0000000-0xfebfffff]
[ 1.604945] pci 0000:00:00.0: [1002:5a11] type 0 class 0x000600
[ 1.604990] pci 0000:00:02.0: [1002:5a16] type 1 class 0x000604
[ 1.605011] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 1.605014] pci 0000:00:02.0: PME# disabled
[ 1.605025] pci 0000:00:04.0: [1002:5a18] type 1 class 0x000604
[ 1.605045] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 1.605047] pci 0000:00:04.0: PME# disabled
[ 1.605057] pci 0000:00:05.0: [1002:5a19] type 1 class 0x000604
[ 1.605077] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 1.605079] pci 0000:00:05.0: PME# disabled
[ 1.605089] pci 0000:00:06.0: [1002:5a1a] type 1 class 0x000604
[ 1.605108] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 1.605111] pci 0000:00:06.0: PME# disabled
[ 1.605120] pci 0000:00:07.0: [1002:5a1b] type 1 class 0x000604
[ 1.605140] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 1.605142] pci 0000:00:07.0: PME# disabled
[ 1.605168] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101
[ 1.605184] pci 0000:00:11.0: reg 10: [io 0xa000-0xa007]
[ 1.605191] pci 0000:00:11.0: reg 14: [io 0x9000-0x9003]
[ 1.605198] pci 0000:00:11.0: reg 18: [io 0x8000-0x8007]
[ 1.605205] pci 0000:00:11.0: reg 1c: [io 0x7000-0x7003]
[ 1.605212] pci 0000:00:11.0: reg 20: [io 0x6000-0x600f]
[ 1.605219] pci 0000:00:11.0: reg 24: [mem 0xfbbfe000-0xfbbfe3ff]
[ 1.605233] pci 0000:00:11.0: set SATA to AHCI mode
[ 1.605340] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 1.605350] pci 0000:00:12.0: reg 10: [mem 0xfbbf7000-0xfbbf7fff]
[ 1.605400] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 1.605414] pci 0000:00:12.2: reg 10: [mem 0xfbbfe400-0xfbbfe4ff]
[ 1.605463] pci 0000:00:12.2: supports D1 D2
[ 1.605465] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 1.605468] pci 0000:00:12.2: PME# disabled
[ 1.605482] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 1.605492] pci 0000:00:13.0: reg 10: [mem 0xfbbfc000-0xfbbfcfff]
[ 1.605541] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 1.605555] pci 0000:00:13.2: reg 10: [mem 0xfbbfe800-0xfbbfe8ff]
[ 1.605604] pci 0000:00:13.2: supports D1 D2
[ 1.605605] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 1.605608] pci 0000:00:13.2: PME# disabled
[ 1.605623] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 1.605673] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[ 1.605683] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 1.605690] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 1.605697] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 1.605703] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 1.605710] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 1.605736] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 1.605751] pci 0000:00:14.2: reg 10: [mem 0xfbbf8000-0xfbbfbfff 64bit]
[ 1.605792] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 1.605795] pci 0000:00:14.2: PME# disabled
[ 1.605804] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 1.605857] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 1.605886] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 1.605896] pci 0000:00:14.5: reg 10: [mem 0xfbbfd000-0xfbbfdfff]
[ 1.605943] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 1.605952] pci 0000:00:16.0: reg 10: [mem 0xfbbff000-0xfbbfffff]
[ 1.606001] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 1.606015] pci 0000:00:16.2: reg 10: [mem 0xfbbfec00-0xfbbfecff]
[ 1.606064] pci 0000:00:16.2: supports D1 D2
[ 1.606065] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 1.606068] pci 0000:00:16.2: PME# disabled
[ 1.606082] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 1.606094] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 1.606104] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 1.606114] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 1.606125] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 1.606166] pci 0000:06:00.0: [10de:0e22] type 0 class 0x000300
[ 1.606174] pci 0000:06:00.0: reg 10: [mem 0xfc000000-0xfdffffff]
[ 1.606183] pci 0000:06:00.0: reg 14: [mem 0xd8000000-0xdfffffff 64bit pref]
[ 1.606192] pci 0000:06:00.0: reg 1c: [mem 0xd4000000-0xd7ffffff 64bit pref]
[ 1.606198] pci 0000:06:00.0: reg 24: [io 0xec00-0xec7f]
[ 1.606204] pci 0000:06:00.0: reg 30: [mem 0xfe980000-0xfe9fffff pref]
[ 1.606239] pci 0000:06:00.1: [10de:0beb] type 0 class 0x000403
[ 1.606247] pci 0000:06:00.1: reg 10: [mem 0xfe97c000-0xfe97ffff]
[ 1.620019] pci 0000:00:02.0: PCI bridge to [bus 06-06]
[ 1.620134] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.620136] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe9fffff]
[ 1.620140] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff
64bit pref]
[ 1.620174] pci 0000:05:00.0: [197b:2363] type 0 class 0x000101
[ 1.620237] pci 0000:05:00.0: reg 24: [mem 0xfbffe000-0xfbffffff]
[ 1.620269] pci 0000:05:00.0: PME# supported from D3hot
[ 1.620273] pci 0000:05:00.0: PME# disabled
[ 1.620295] pci 0000:05:00.1: [197b:2363] type 0 class 0x000101
[ 1.620312] pci 0000:05:00.1: reg 10: [io 0xdc00-0xdc07]
[ 1.620321] pci 0000:05:00.1: reg 14: [io 0xd880-0xd883]
[ 1.620331] pci 0000:05:00.1: reg 18: [io 0xd800-0xd807]
[ 1.620341] pci 0000:05:00.1: reg 1c: [io 0xd480-0xd483]
[ 1.620351] pci 0000:05:00.1: reg 20: [io 0xd400-0xd40f]
[ 1.620400] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 1.620531] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 1.620614] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.620616] pci 0000:00:04.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 1.620618] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.620647] pci 0000:04:00.0: [1106:3403] type 0 class 0x000c00
[ 1.620662] pci 0000:04:00.0: reg 10: [mem 0xfbeff800-0xfbefffff 64bit]
[ 1.620670] pci 0000:04:00.0: reg 18: [io 0xc800-0xc8ff]
[ 1.620719] pci 0000:04:00.0: supports D2
[ 1.620721] pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
[ 1.620724] pci 0000:04:00.0: PME# disabled
[ 1.640018] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 1.640132] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 1.640135] pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.640138] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.640172] pci 0000:03:00.0: [11ab:4381] type 0 class 0x000200
[ 1.640189] pci 0000:03:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
[ 1.640198] pci 0000:03:00.0: reg 18: [io 0xb800-0xb8ff]
[ 1.640227] pci 0000:03:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 1.640252] pci 0000:03:00.0: supports D1 D2
[ 1.640254] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.640257] pci 0000:03:00.0: PME# disabled
[ 1.660018] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 1.660134] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 1.660136] pci 0000:00:06.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.660139] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.660173] pci 0000:02:00.0: [1033:0194] type 0 class 0x000c03
[ 1.660188] pci 0000:02:00.0: reg 10: [mem 0xfbcfe000-0xfbcfffff 64bit]
[ 1.660243] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.660247] pci 0000:02:00.0: PME# disabled
[ 1.680017] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 1.680132] pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.680134] pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.680137] pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.680187] pci 0000:00:14.4: PCI bridge to [bus 01-01] (subtractive decode)
[ 1.680276] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 1.680279] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff]
(disabled)
[ 1.680282] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff
pref] (disabled)
[ 1.680284] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 1.680286] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 1.680288] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[ 1.680290] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff]
(subtractive decode)
[ 1.680292] pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff]
(subtractive decode)
[ 1.680294] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff]
(subtractive decode)
[ 1.680309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.680390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC02._PRT]
[ 1.680412] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC04._PRT]
[ 1.680436] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC05._PRT]
[ 1.680454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC06._PRT]
[ 1.680472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PC07._PRT]
[ 1.680502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 1.680601] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.680767] pci0000:00: ACPI _OSC control (0x1d) granted
[ 1.684193] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 14 15)
[ 1.684610] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 14 15)
[ 1.685027] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 14 15)
[ 1.685438] ACPI: PCI Interrupt Link [LNKD] (IRQs *4 7 10 11 14 15)
[ 1.685844] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 *11 14 15)
[ 1.686244] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 14 15)
[ 1.686642] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 14 15)
[ 1.687041] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0,
disabled.
[ 1.687578] vgaarb: device added:
PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.687694] vgaarb: loaded
[ 1.687867] SCSI subsystem initialized
[ 1.687958] libata version 3.00 loaded.
[ 1.687958] usbcore: registered new interface driver usbfs
[ 1.687958] usbcore: registered new interface driver hub
[ 1.687958] usbcore: registered new device driver usb
[ 1.687958] wmi: Mapper loaded
[ 1.687958] PCI: Using ACPI for IRQ routing
[ 1.687958] PCI: pci_cache_line_size set to 64 bytes
[ 1.687958] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
[ 1.687958] reserve RAM buffer: 00000000cfe90000 - 00000000cfffffff
[ 1.687958] NetLabel: Initializing
[ 1.687958] NetLabel: domain hash size = 128
[ 1.687958] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.687958] NetLabel: unlabeled traffic allowed by default
[ 1.687958] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.687958] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.692028] Switching to clocksource hpet
[ 1.695748] AppArmor: AppArmor Filesystem Enabled
[ 1.695840] pnp: PnP ACPI init
[ 1.695917] ACPI: bus type pnp registered
[ 1.696056] pnp 00:00: [bus 00-ff]
[ 1.696058] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.696059] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.696061] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.696062] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.696064] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 1.696065] pnp 00:00: [mem 0xcff00000-0xdfffffff window]
[ 1.696067] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 1.696099] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.696144] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.696146] pnp 00:01: [mem 0xfec20000-0xfec200ff]
[ 1.696179] system 00:01: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 1.696264] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.696284] pnp 00:02: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.696309] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.697507] Switched to NOHz mode on CPU #0
[ 1.697517] Switched to NOHz mode on CPU #5
[ 1.697577] Switched to NOHz mode on CPU #2
[ 1.697582] Switched to NOHz mode on CPU #3
[ 1.697586] Switched to NOHz mode on CPU #1
[ 1.697589] Switched to NOHz mode on CPU #4
[ 1.698268] pnp 00:03: [dma 4]
[ 1.698269] pnp 00:03: [io 0x0000-0x000f]
[ 1.698271] pnp 00:03: [io 0x0081-0x0083]
[ 1.698273] pnp 00:03: [io 0x0087]
[ 1.698274] pnp 00:03: [io 0x0089-0x008b]
[ 1.698276] pnp 00:03: [io 0x008f]
[ 1.698277] pnp 00:03: [io 0x00c0-0x00df]
[ 1.698311] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.698318] pnp 00:04: [io 0x0070-0x0071]
[ 1.698328] pnp 00:04: [irq 8]
[ 1.698356] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.698362] pnp 00:05: [io 0x0061]
[ 1.698385] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.698392] pnp 00:06: [io 0x00f0-0x00ff]
[ 1.698395] pnp 00:06: [irq 13]
[ 1.698420] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.698451] pnp 00:07: [mem 0xfed00000-0xfed003ff]
[ 1.698478] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.698540] pnp 00:08: [mem 0xfec00000-0xfec00fff]
[ 1.698541] pnp 00:08: [mem 0xfee00000-0xfee00fff]
[ 1.698578] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.698664] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.698750] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.698850] pnp 00:09: [io 0x0010-0x001f]
[ 1.698852] pnp 00:09: [io 0x0022-0x003f]
[ 1.698853] pnp 00:09: [io 0x0062-0x0063]
[ 1.698854] pnp 00:09: [io 0x0065-0x006f]
[ 1.698855] pnp 00:09: [io 0x0072-0x007f]
[ 1.698856] pnp 00:09: [io 0x0080]
[ 1.698858] pnp 00:09: [io 0x0084-0x0086]
[ 1.698859] pnp 00:09: [io 0x0088]
[ 1.698860] pnp 00:09: [io 0x008c-0x008e]
[ 1.698861] pnp 00:09: [io 0x0090-0x009f]
[ 1.698862] pnp 00:09: [io 0x00a2-0x00bf]
[ 1.698863] pnp 00:09: [io 0x00b1]
[ 1.698865] pnp 00:09: [io 0x00e0-0x00ef]
[ 1.698866] pnp 00:09: [io 0x04d0-0x04d1]
[ 1.698867] pnp 00:09: [io 0x040b]
[ 1.698868] pnp 00:09: [io 0x04d6]
[ 1.698869] pnp 00:09: [io 0x0c00-0x0c01]
[ 1.698870] pnp 00:09: [io 0x0c14]
[ 1.698872] pnp 00:09: [io 0x0c50-0x0c51]
[ 1.698873] pnp 00:09: [io 0x0c52]
[ 1.698874] pnp 00:09: [io 0x0c6c]
[ 1.698875] pnp 00:09: [io 0x0c6f]
[ 1.698876] pnp 00:09: [io 0x0cd0-0x0cd1]
[ 1.698877] pnp 00:09: [io 0x0cd2-0x0cd3]
[ 1.698878] pnp 00:09: [io 0x0cd4-0x0cd5]
[ 1.698880] pnp 00:09: [io 0x0cd6-0x0cd7]
[ 1.698881] pnp 00:09: [io 0x0cd8-0x0cdf]
[ 1.698882] pnp 00:09: [io 0x0800-0x089f]
[ 1.698883] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 1.698885] pnp 00:09: [io 0x0b00-0x0b1f]
[ 1.698886] pnp 00:09: [io 0x0b20-0x0b3f]
[ 1.698887] pnp 00:09: [io 0x0900-0x090f]
[ 1.698888] pnp 00:09: [io 0x0910-0x091f]
[ 1.698890] pnp 00:09: [io 0xfe00-0xfefe]
[ 1.698891] pnp 00:09: [io 0x0060-0x005f disabled]
[ 1.698892] pnp 00:09: [io 0x0064-0x0063 disabled]
[ 1.698894] pnp 00:09: [mem 0xcff00000-0xcfffffff]
[ 1.698896] pnp 00:09: [mem 0xffb80000-0xffbfffff]
[ 1.698898] pnp 00:09: [mem 0xfec10000-0xfec1001f]
[ 1.698899] pnp 00:09: [mem 0xfed80000-0xfed80fff]
[ 1.698900] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled]
[ 1.698978] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 1.699063] system 00:09: [io 0x040b] has been reserved
[ 1.699141] system 00:09: [io 0x04d6] has been reserved
[ 1.699220] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 1.699300] system 00:09: [io 0x0c14] has been reserved
[ 1.699380] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 1.699460] system 00:09: [io 0x0c52] has been reserved
[ 1.699539] system 00:09: [io 0x0c6c] has been reserved
[ 1.699617] system 00:09: [io 0x0c6f] has been reserved
[ 1.699695] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 1.699776] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 1.699856] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 1.699936] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 1.700046] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 1.700133] system 00:09: [io 0x0800-0x089f] has been reserved
[ 1.700213] system 00:09: [io 0x0b00-0x0b1f] has been reserved
[ 1.700294] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 1.700377] system 00:09: [io 0x0900-0x090f] has been reserved
[ 1.700464] system 00:09: [io 0x0910-0x091f] has been reserved
[ 1.700544] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 1.700625] system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
[ 1.700708] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
[ 1.700792] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
[ 1.700875] system 00:09: [mem 0xfed80000-0xfed80fff] has been reserved
[ 1.700960] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.700978] pnp 00:0a: [io 0x0060]
[ 1.700979] pnp 00:0a: [io 0x0064]
[ 1.700982] pnp 00:0a: [irq 1]
[ 1.701004] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 1.701107] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 1.701109] pnp 00:0b: [io 0x0230-0x023f]
[ 1.701110] pnp 00:0b: [io 0x0290-0x029f]
[ 1.701111] pnp 00:0b: [io 0x0f40-0x0f4f]
[ 1.701113] pnp 00:0b: [io 0x0a30-0x0a3f]
[ 1.701151] system 00:0b: [io 0x0230-0x023f] has been reserved
[ 1.701231] system 00:0b: [io 0x0290-0x029f] has been reserved
[ 1.701312] system 00:0b: [io 0x0f40-0x0f4f] has been reserved
[ 1.701394] system 00:0b: [io 0x0a30-0x0a3f] has been reserved
[ 1.701475] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.701494] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 1.701528] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.701611] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.701670] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 1.701671] pnp 00:0d: [mem 0x000c0000-0x000cffff]
[ 1.701673] pnp 00:0d: [mem 0x000e0000-0x000fffff]
[ 1.701674] pnp 00:0d: [mem 0x00100000-0xcfefffff]
[ 1.701675] pnp 00:0d: [mem 0xfec00000-0xffffffff]
[ 1.701712] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.701798] system 00:0d: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.701881] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.701967] system 00:0d: [mem 0x00100000-0xcfefffff] could not be reserved
[ 1.702053] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 1.702137] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.702197] pnp: PnP ACPI: found 14 devices
[ 1.702271] ACPI: ACPI bus type pnp unregistered
[ 1.707804] pci 0000:00:02.0: PCI bridge to [bus 06-06]
[ 1.707884] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.707969] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe9fffff]
[ 1.708055] pci 0000:00:02.0: bridge window [mem 0xd4000000-0xdfffffff
64bit pref]
[ 1.708167] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 1.708245] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.708328] pci 0000:00:04.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 1.708414] pci 0000:00:04.0: bridge window [mem pref disabled]
[ 1.708496] pci 0000:00:05.0: PCI bridge to [bus 04-04]
[ 1.708574] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
[ 1.708658] pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 1.708745] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 1.708827] pci 0000:00:06.0: PCI bridge to [bus 03-03]
[ 1.708905] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 1.708988] pci 0000:00:06.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 1.709074] pci 0000:00:06.0: bridge window [mem pref disabled]
[ 1.709156] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 1.709233] pci 0000:00:07.0: bridge window [io disabled]
[ 1.709313] pci 0000:00:07.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 1.709399] pci 0000:00:07.0: bridge window [mem pref disabled]
[ 1.709482] pci 0000:00:14.4: PCI bridge to [bus 01-01]
[ 1.709559] pci 0000:00:14.4: bridge window [io disabled]
[ 1.709643] pci 0000:00:14.4: bridge window [mem disabled]
[ 1.709725] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 1.709817] pci 0000:00:02.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 1.709902] pci 0000:00:02.0: setting latency timer to 64
[ 1.709906] pci 0000:00:04.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 1.710012] pci 0000:00:04.0: setting latency timer to 64
[ 1.710015] pci 0000:00:05.0: PCI INT A -> GSI 52 (level, low) -> IRQ 52
[ 1.710101] pci 0000:00:05.0: setting latency timer to 64
[ 1.710106] pci 0000:00:06.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.710189] pci 0000:00:06.0: setting latency timer to 64
[ 1.710193] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[ 1.710276] pci 0000:00:07.0: setting latency timer to 64
[ 1.710281] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.710283] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.710284] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.710286] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.710287] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.710289] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.710291] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 1.710292] pci_bus 0000:06: resource 1 [mem 0xfc000000-0xfe9fffff]
[ 1.710294] pci_bus 0000:06: resource 2 [mem 0xd4000000-0xdfffffff 64bit
pref]
[ 1.710296] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 1.710297] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 1.710299] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 1.710300] pci_bus 0000:04: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 1.710302] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
[ 1.710304] pci_bus 0000:03: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 1.710305] pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 1.710307] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 1.710308] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 1.710310] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.710312] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.710313] pci_bus 0000:01: resource 8 [mem 0xcff00000-0xdfffffff]
[ 1.710315] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 1.710336] NET: Registered protocol family 2
[ 1.710566] IP route cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 1.711668] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 1.713645] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.713958] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.714043] TCP reno registered
[ 1.714123] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.714246] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.714432] NET: Registered protocol family 1
[ 2.570136] pci 0000:06:00.0: Boot video device
[ 2.570176] PCI: CLS 64 bytes, default 64
[ 2.570215] Trying to unpack rootfs image as initramfs...
[ 2.819413] Freeing initrd memory: 17892k freed
[ 2.824854] PCI-DMA: Disabling AGP.
[ 2.825037] PCI-DMA: aperture base @ c0000000 size 65536 KB
[ 2.825119] PCI-DMA: using GART IOMMU.
[ 2.825194] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 2.828611] audit: initializing netlink socket (disabled)
[ 2.828715] type=2000 audit(1304349277.820:1): initialized
[ 2.842845] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.844172] VFS: Disk quotas dquot_6.5.2
[ 2.844286] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.844842] fuse init (API version 7.16)
[ 2.844986] msgmni has been set to 15996
[ 2.845292] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 2.845467] io scheduler noop registered
[ 2.845544] io scheduler deadline registered
[ 2.845643] io scheduler cfq registered (default)
[ 2.845851] pcieport 0000:00:02.0: setting latency timer to 64
[ 2.845874] pcieport 0000:00:02.0: irq 72 for MSI/MSI-X
[ 2.845940] pcieport 0000:00:04.0: setting latency timer to 64
[ 2.845957] pcieport 0000:00:04.0: irq 73 for MSI/MSI-X
[ 2.846015] pcieport 0000:00:05.0: setting latency timer to 64
[ 2.846032] pcieport 0000:00:05.0: irq 74 for MSI/MSI-X
[ 2.846091] pcieport 0000:00:06.0: setting latency timer to 64
[ 2.846107] pcieport 0000:00:06.0: irq 75 for MSI/MSI-X
[ 2.846163] pcieport 0000:00:07.0: setting latency timer to 64
[ 2.846180] pcieport 0000:00:07.0: irq 76 for MSI/MSI-X
[ 2.846245] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.846335] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.846417] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 2.846502] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 2.846511] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 2.846597] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 2.846681] pci 0000:05:00.1: Signaling PME through PCIe PME interrupt
[ 2.846766] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 2.846773] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 2.846859] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 2.846943] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded
[ 2.846951] pcieport 0000:00:06.0: Signaling PME through PCIe PME interrupt
[ 2.847036] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.847121] pcie_pme 0000:00:06.0:pcie01: service driver pcie_pme loaded
[ 2.847128] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 2.847214] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.847298] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[ 2.847310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.847405] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.847570] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 2.847688] ACPI: Power Button [PWRB]
[ 2.847785] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.847897] ACPI: Power Button [PWRF]
[ 2.848085] ACPI: acpi_idle registered with cpuidle
[ 3.100440] ERST: Table is not found!
[ 3.100578] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.180436] Linux agpgart interface v0.103
[ 3.181138] brd: module loaded
[ 3.183086] loop: module loaded
[ 3.183410] pata_acpi 0000:00:14.1: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.183543] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 3.183627] pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
[ 3.183716] pata_acpi 0000:05:00.1: PCI INT B -> GSI 45 (level, low) ->
IRQ 45
[ 3.183842] pata_acpi 0000:05:00.1: setting latency timer to 64
[ 3.183850] pata_acpi 0000:05:00.1: PCI INT B disabled
[ 3.184236] Fixed MDIO Bus: probed
[ 3.184363] PPP generic driver version 2.4.2
[ 3.184466] tun: Universal TUN/TAP device driver, 1.6
[ 3.184545] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 3.184676] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.184848] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.184965] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 3.185088] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus
number 1
[ 3.250087] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3
EHCI dummy qh workaround
[ 3.250225] QUIRK: Enable AMD PLL fix
[ 3.250233] ehci_hcd 0000:00:12.2: debug port 1
[ 3.250325] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbbfe400
[ 3.270061] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 3.270240] hub 1-0:1.0: USB hub found
[ 3.270317] hub 1-0:1.0: 5 ports detected
[ 3.270531] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.270628] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 3.270734] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 2
[ 3.270871] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3
EHCI dummy qh workaround
[ 3.271005] ehci_hcd 0000:00:13.2: debug port 1
[ 3.271091] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfbbfe800
[ 3.290059] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 3.290219] hub 2-0:1.0: USB hub found
[ 3.290296] hub 2-0:1.0: 5 ports detected
[ 3.290508] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[ 3.290604] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 3.290706] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus
number 3
[ 3.290850] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3
EHCI dummy qh workaround
[ 3.290985] ehci_hcd 0000:00:16.2: debug port 1
[ 3.291070] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfbbfec00
[ 3.310059] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 3.310217] hub 3-0:1.0: USB hub found
[ 3.310294] hub 3-0:1.0: 4 ports detected
[ 3.310438] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.310610] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 3.310707] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 3.310821] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus
number 4
[ 3.310978] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfbbf7000
[ 3.374152] hub 4-0:1.0: USB hub found
[ 3.374234] hub 4-0:1.0: 5 ports detected
[ 3.374450] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 3.374546] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.374647] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 5
[ 3.374798] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbbfc000
[ 3.434141] hub 5-0:1.0: USB hub found
[ 3.434220] hub 5-0:1.0: 5 ports detected
[ 3.434397] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) ->
IRQ 18
[ 3.434492] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 3.434589] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus
number 6
[ 3.434727] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbbfd000
[ 3.494132] hub 6-0:1.0: USB hub found
[ 3.494214] hub 6-0:1.0: 2 ports detected
[ 3.494383] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 3.494479] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 3.494579] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus
number 7
[ 3.494718] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfbbff000
[ 3.554133] hub 7-0:1.0: USB hub found
[ 3.554215] hub 7-0:1.0: 4 ports detected
[ 3.554364] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.554493] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.554580] i8042: PNP: PS/2 appears to have AUX port disabled, if this
is incorrect please boot with i8042.nopnp
[ 3.554808] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.554930] mousedev: PS/2 mouse device common for all mice
[ 3.555069] rtc_cmos 00:04: RTC can wake from S4
[ 3.572625] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 3.600134] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 3.600237] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.600385] device-mapper: uevent: version 1.0.3
[ 3.600506] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised:
dm-devel@xxxxxxxxxx
[ 3.600710] device-mapper: multipath: version 1.3.0 loaded
[ 3.600793] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.600995] cpuidle: using governor ladder
[ 3.601243] cpuidle: using governor menu
[ 3.601319] EFI Variables Facility v0.08 2004-May-17
[ 3.601560] TCP cubic registered
[ 3.601711] NET: Registered protocol family 10
[ 3.602109] NET: Registered protocol family 17
[ 3.602197] Registering the dns_resolver key type
[ 3.602354] powernow-k8: Found 1 AMD Phenom(tm) II X6 1055T Processor (6
cpu cores) (version 2.20.00)
[ 3.602492] powernow-k8: Core Performance Boosting: on.
[ 3.602578] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects
found.
[ 3.602579] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 3.602842] PM: Hibernation image not present or could not be loaded.
[ 3.602848] registered taskstats version 1
[ 3.603176] Magic number: 11:899:233
[ 3.603251] hash matches drivers/base/power/main.c:554
[ 3.603439] rtc_cmos 00:04: setting system clock to 2011-05-02 15:14:39
UTC (1304349279)
[ 3.603554] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.603635] EDD information not available.
[ 3.604911] Freeing unused kernel memory: 972k freed
[ 3.605214] Write protecting the kernel read-only data: 10240k
[ 3.605897] Freeing unused kernel memory: 156k freed
[ 3.609300] Freeing unused kernel memory: 1528k freed
[ 3.624772] udev[118]: starting version 163
[ 3.643833] pata_jmicron 0000:05:00.1: PCI INT B -> GSI 45 (level, low)
-> IRQ 45
[ 3.643974] pata_jmicron 0000:05:00.1: setting latency timer to 64
[ 3.649045] sky2: driver version 1.28
[ 3.649269] scsi0 : pata_jmicron
[ 3.649993] scsi1 : pata_jmicron
[ 3.650387] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400
irq 45
[ 3.650474] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408
irq 45
[ 3.651703] sky2 0000:03:00.0: PCI INT A -> GSI 51 (level, low) -> IRQ 51
[ 3.651798] sky2 0000:03:00.0: setting latency timer to 64
[ 3.651824] sky2 0000:03:00.0: Yukon-2 Optima chip revision 1
[ 3.651975] sky2 0000:03:00.0: irq 77 for MSI/MSI-X
[ 3.652362] sky2 0000:03:00.0: eth0: addr 20:cf:30:71:f3:62
[ 3.655901] scsi2 : pata_atiixp
[ 3.656085] scsi3 : pata_atiixp
[ 3.656602] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 3.656696] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 3.660071] usb 1-3: new high speed USB device number 3 using ehci_hcd
[ 3.682843] ahci 0000:00:11.0: version 3.0
[ 3.682860] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.682982] ahci 0000:00:11.0: irq 78 for MSI/MSI-X
[ 3.683045] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps
0xf impl SATA mode
[ 3.683164] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp
pio slum part
[ 3.683718] scsi4 : ahci
[ 3.683854] scsi5 : ahci
[ 3.683987] scsi6 : ahci
[ 3.684120] scsi7 : ahci
[ 3.684268] ata5: SATA max UDMA/133 abar m1024@0xfbbfe000 port
0xfbbfe100 irq 78
[ 3.684381] ata6: SATA max UDMA/133 abar m1024@0xfbbfe000 port
0xfbbfe180 irq 78
[ 3.684496] ata7: SATA max UDMA/133 abar m1024@0xfbbfe000 port
0xfbbfe200 irq 78
[ 3.684608] ata8: SATA max UDMA/133 abar m1024@0xfbbfe000 port
0xfbbfe280 irq 78
[ 3.684840] ahci 0000:05:00.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44
[ 3.700079] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps
0x3 impl SATA mode
[ 3.700193] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum
part
[ 3.700282] ahci 0000:05:00.0: setting latency timer to 64
[ 3.700544] scsi8 : ahci
[ 3.700681] scsi9 : ahci
[ 3.700811] ata9: SATA max UDMA/133 abar m8192@0xfbffe000 port
0xfbffe100 irq 44
[ 3.700924] ata10: SATA max UDMA/133 abar m8192@0xfbffe000 port
0xfbffe180 irq 44
[ 3.830084] Refined TSC clocksource calibration: 2809.448 MHz.
[ 3.830170] Switching to clocksource tsc
[ 3.860501] ata3.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
[ 3.860598] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.860872] ata3.01: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
[ 3.860958] ata3.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.861044] ata3.00: limited to UDMA/33 due to 40-wire cable
[ 3.861123] ata3.01: limited to UDMA/33 due to 40-wire cable
[ 3.900497] ata3.00: configured for UDMA/33
[ 3.940501] ata3.01: configured for UDMA/33
[ 3.981502] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0
ANSI: 5
[ 3.981727] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 3.981748] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.981919] sd 2:0:0:0: [sda] Write Protect is off
[ 3.981922] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.981948] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.982204] scsi 2:0:1:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0
ANSI: 5
[ 3.982402] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 3.982440] sd 2:0:1:0: [sdb] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 3.982534] sd 2:0:1:0: [sdb] Write Protect is off
[ 3.982537] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.982566] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 3.999444] sdb: sdb1 sdb2
[ 3.999788] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 4.015628] sda: sda1 sda2
[ 4.015962] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.050095] ata10: SATA link down (SStatus 0 SControl 300)
[ 4.140058] usb 4-2: new low speed USB device number 2 using ohci_hcd
[ 4.230059] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.230159] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.230270] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.230371] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.230515] ata5.00: ATA-8: OCZ-VERTEX, 1.4, max UDMA/133
[ 4.230599] ata5.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 4.230744] ata6.00: ATA-8: OCZ-VERTEX, 1.4, max UDMA/133
[ 4.230824] ata6.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 4.231080] ata8.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133
[ 4.231165] ata8.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 4.231450] ata5.00: configured for UDMA/133
[ 4.231626] scsi 4:0:0:0: Direct-Access ATA OCZ-VERTEX 1.4 PQ: 0 ANSI: 5
[ 4.231850] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 4.231867] sd 4:0:0:0: [sdc] 62533296 512-byte logical blocks: (32.0
GB/29.8 GiB)
[ 4.232046] sd 4:0:0:0: [sdc] Write Protect is off
[ 4.232048] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 4.232075] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.232118] ata8.00: configured for UDMA/133
[ 4.232452] sdc: sdc1
[ 4.232764] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 4.233846] ata6.00: configured for UDMA/133
[ 4.234020] scsi 5:0:0:0: Direct-Access ATA OCZ-VERTEX 1.4 PQ: 0 ANSI: 5
[ 4.234241] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 4.234256] sd 5:0:0:0: [sdd] 62533296 512-byte logical blocks: (32.0
GB/29.8 GiB)
[ 4.234432] sd 5:0:0:0: [sdd] Write Protect is off
[ 4.234435] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 4.234461] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.234828] sdd: sdd1
[ 4.235134] sd 5:0:0:0: [sdd] Attached SCSI disk
[ 4.243583] ata7.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[ 4.243671] ata7.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
31/32), AA
[ 4.245825] ata7.00: configured for UDMA/133
[ 4.246005] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0
ANSI: 5
[ 4.246227] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 4.246243] sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500
GB/465 GiB)
[ 4.246379] sd 6:0:0:0: [sde] Write Protect is off
[ 4.246382] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 4.246416] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.246719] scsi 7:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0
ANSI: 5
[ 4.246935] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 4.246950] sd 7:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00
TB/931 GiB)
[ 4.247088] sd 7:0:0:0: [sdf] Write Protect is off
[ 4.247090] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 4.247126] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.250067] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.258208] ata9.00: ATAPI: HL-DT-ST BD-RE BH10LS30, 1.00, max UDMA/133
[ 4.262157] ata9.00: configured for UDMA/133
[ 4.265987] sdf: sdf1 sdf2 sdf3
[ 4.266368] sd 7:0:0:0: [sdf] Attached SCSI disk
[ 4.274567] scsi 8:0:0:0: CD-ROM HL-DT-ST BD-RE BH10LS30 1.00 PQ: 0 ANSI: 5
[ 4.289397] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2
cdda tray
[ 4.289515] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.289665] sr 8:0:0:0: Attached scsi CD-ROM sr0
[ 4.289712] sr 8:0:0:0: Attached scsi generic sg6 type 5
[ 4.312069] sde: sde1 sde2 sde3 sde4 < sde5 sde6 sde7 >
[ 4.312434] sd 6:0:0:0: [sde] Attached SCSI disk
[ 4.314000] firewire_ohci 0000:04:00.0: PCI INT A -> GSI 46 (level, low)
-> IRQ 46
[ 4.314119] firewire_ohci 0000:04:00.0: setting latency timer to 64
[ 4.355221] md: bind<sdc1>
[ 4.356387] md: bind<sdd1>
[ 4.358019] md: raid0 personality registered for level 0
[ 4.358267] bio: create slab <bio-1> at 1
[ 4.358348] md/raid0:md0: looking at sdd1
[ 4.358435] md/raid0:md0: comparing sdd1(62531456) with sdd1(62531456)
[ 4.358575] md/raid0:md0: END
[ 4.358645] md/raid0:md0: ==> UNIQUE
[ 4.358730] md/raid0:md0: 1 zones
[ 4.358801] md/raid0:md0: looking at sdc1
[ 4.358884] md/raid0:md0: comparing sdc1(62531456) with sdd1(62531456)
[ 4.359014] md/raid0:md0: EQUAL
[ 4.359085] md/raid0:md0: FINAL 1 zones
[ 4.359169] md/raid0:md0: done.
[ 4.359240] md/raid0:md0: md_size is 125062912 sectors.
[ 4.359327] ******* md0 configuration *********
[ 4.359412] zone0=[sdc1/sdd1/]
[ 4.359600] zone offset=0kb device offset=0kb size=62531456kb
[ 4.359682] **********************************
[ 4.359682]
[ 4.359834] md0: detected capacity change from 0 to 64032210944
[ 4.361003] md0: unknown partition table
[ 4.387250] md: bind<sdb1>
[ 4.390154] input: 2.4GHZ Mouse as
/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.0/input/input3
[ 4.390344] generic-usb 0003:1EA7:0002.0001: input,hidraw0: USB HID
v1.10 Keyboard [2.4GHZ Mouse] on usb-0000:00:12.0-2/input0
[ 4.398417] input: 2.4GHZ Mouse as
/devices/pci0000:00/0000:00:12.0/usb4/4-2/4-2:1.1/input/input4
[ 4.398660] generic-usb 0003:1EA7:0002.0002: input,hiddev0,hidraw1: USB
HID v1.10 Mouse [2.4GHZ Mouse] on usb-0000:00:12.0-2/input1
[ 4.398797] usbcore: registered new interface driver usbhid
[ 4.398875] usbhid: USB HID core driver
[ 4.400144] firewire_ohci: Added fw-ohci device 0000:04:00.0, OHCI
v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 4.412378] md: bind<sdb2>
[ 4.528443] md: bind<sda1>
[ 4.531718] md: raid1 personality registered for level 1
[ 4.531986] md/raid1:md1: active with 2 out of 2 mirrors
[ 4.532087] md1: detected capacity change from 0 to 100019273728
[ 4.532509] md: bind<sda2>
[ 4.533976] md/raid1:md2: active with 2 out of 2 mirrors
[ 4.534072] md2: detected capacity change from 0 to 900182769664
[ 4.534569] md1: unknown partition table
[ 4.536905] md2: unknown partition table
[ 4.879544] Btrfs loaded
[ 4.884459] md: linear personality registered for level -1
[ 4.886167] md: multipath personality registered for level -4
[ 4.889682] async_tx: api initialized (async)
[ 4.900142] firewire_core: created device fw0: GUID 001e8c0000dec4e8, S400
[ 5.060073] raid6: int64x1 2796 MB/s
[ 5.230053] raid6: int64x2 3940 MB/s
[ 5.400079] raid6: int64x4 2941 MB/s
[ 5.570082] raid6: int64x8 2571 MB/s
[ 5.740069] raid6: sse2x1 4468 MB/s
[ 5.910074] raid6: sse2x2 7410 MB/s
[ 6.080048] raid6: sse2x4 8406 MB/s
[ 6.080049] raid6: using algorithm sse2x4 (8406 MB/s)
[ 6.082837] xor: automatically using best checksumming function: generic_sse
[ 6.130057] generic_sse: 13514.400 MB/sec
[ 6.130059] xor: using function: generic_sse (13514.400 MB/sec)
[ 6.133671] md: raid6 personality registered for level 6
[ 6.133673] md: raid5 personality registered for level 5
[ 6.133674] md: raid4 personality registered for level 4
[ 6.138549] md: raid10 personality registered for level 10
[ 6.731556] EXT4-fs (md0): mounted filesystem with ordered data mode.
Opts: (null)
[ 6.923710] Adding 15631240k swap on /dev/sde3. Priority:-1 extents:1
across:15631240k
[ 6.983475] udev[497]: starting version 163
[ 7.021375] lp: driver loaded but no devices found
[ 7.026816] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 50 (level, low) ->
IRQ 50
[ 7.026846] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 7.026849] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 7.026922] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus
number 8
[ 7.027352] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro
[ 7.054594] ATK0110 ATK0110:00: EC enabled
[ 7.055208] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 7.064458] MCE: In-kernel MCE decoding enabled.
[ 7.065062] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 7.065136] SP5100 TCO timer: mmio address 0xb8fe00 already in use
[ 7.071804] EDAC MC: Ver: 2.1.0 May 2 2011
[ 7.082491] AMD64 EDAC driver v3.4.0
[ 7.100760] nvidia: module license 'NVIDIA' taints kernel.
[ 7.100763] Disabling lock debugging due to kernel taint
[ 7.109973] EXT3-fs: barriers not enabled
[ 7.110989] kjournald starting. Commit interval 5 seconds
[ 7.111139] EXT3-fs (sde2): using internal journal
[ 7.111143] EXT3-fs (sde2): mounted filesystem with ordered data mode
[ 7.162243] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2
vid 0x04F9 pid 0x002E
[ 7.162273] usbcore: registered new interface driver usblp
[ 7.178733] type=1400 audit(1304345683.058:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient3" pid=783
comm="apparmor_parser"
[ 7.178770] type=1400 audit(1304345683.058:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=783
comm="apparmor_parser"
[ 7.178798] type=1400 audit(1304345683.058:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=783 comm="apparmor_parser"
[ 7.181252] IPv4 FIB: Using LC-trie version 0.409
[ 7.193545] type=1400 audit(1304345683.078:5): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=630
comm="apparmor_parser"
[ 7.193588] type=1400 audit(1304345683.078:6): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630
comm="apparmor_parser"
[ 7.193634] type=1400 audit(1304345683.078:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=630
comm="apparmor_parser"
[ 7.575075] xhci_hcd 0000:02:00.0: can't setup
[ 7.575114] xhci_hcd 0000:02:00.0: USB bus 8 deregistered
[ 7.575202] EDAC amd64: DRAM ECC disabled.
[ 7.575210] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 7.575211] Either enable ECC checking or force module loading by
setting 'ecc_enable_override'.
[ 7.575212] (Note that use of the override may cause unknown side effects.)
[ 7.575250] nvidia 0000:06:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 7.575258] nvidia 0000:06:00.0: setting latency timer to 64
[ 7.575267] vgaarb: device changed decodes:
PCI:0000:06:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.575419] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.06 Mon
Apr 18 14:53:56 PDT 2011
[ 7.575469] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 7.575473] hda_intel: position_fix set to 1 for device 1043:8410
[ 7.575593] xhci_hcd 0000:02:00.0: PCI INT A disabled
[ 7.575595] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -110
[ 7.575636] xhci_hcd: probe of 0000:02:00.0 failed with error -110
[ 7.656977] hda-codec: no NID for mapping control Independent HP:0:0
[ 7.658553] HDA Intel 0000:06:00.1: PCI INT B -> GSI 25 (level, low) ->
IRQ 25
[ 7.658556] hda_intel: Disable MSI for Nvidia chipset
[ 7.658599] HDA Intel 0000:06:00.1: setting latency timer to 64
[ 7.866261] EXT3-fs: barriers not enabled
[ 7.866449] kjournald starting. Commit interval 5 seconds
[ 8.010214] EXT3-fs (md1): using internal journal
[ 8.010218] EXT3-fs (md1): mounted filesystem with ordered data mode
[ 8.188881] EXT3-fs: barriers not enabled
[ 8.189057] kjournald starting. Commit interval 5 seconds
[ 8.200201] EXT3-fs (md2): using internal journal
[ 8.200205] EXT3-fs (md2): mounted filesystem with ordered data mode
[ 8.232134] EXT3-fs: barriers not enabled
[ 8.246464] kjournald starting. Commit interval 5 seconds
[ 8.246797] EXT3-fs (sdf3): using internal journal
[ 8.246800] EXT3-fs (sdf3): mounted filesystem with ordered data mode
[ 8.279141] sshd (1146): /proc/1146/oom_adj is deprecated, please use
/proc/1146/oom_score_adj instead.
[ 8.370199] type=1400 audit(1304345684.258:8): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/tcpdump" pid=1185
comm="apparmor_parser"
[ 8.384014] type=1400 audit(1304345684.268:9): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1184
comm="apparmor_parser"
[ 8.384298] type=1400 audit(1304345684.268:10): apparmor="STATUS"
operation="profile_load"
name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=1184
comm="apparmor_parser"
[ 8.391556] type=1400 audit(1304345684.278:11): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=1178
comm="apparmor_parser"
[ 8.391598] type=1400 audit(1304345684.278:12): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1178
comm="apparmor_parser"
[ 8.391629] type=1400 audit(1304345684.278:13): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=1178
comm="apparmor_parser"
[ 8.421663] sky2 0000:03:00.0: eth0: enabling interface
[ 8.422539] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.457015] type=1400 audit(1304345684.338:14): apparmor="STATUS"
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1182
comm="apparmor_parser"
[ 8.457107] type=1400 audit(1304345684.338:15): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/cupsd" pid=1182
comm="apparmor_parser"
[ 8.702297] type=1400 audit(1304345684.588:16): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/libvirtd" pid=1183
comm="apparmor_parser"
[ 10.096870] sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full
duplex, flow control both
[ 10.097000] sky2 0000:03:00.0: eth0: Link is up at 100 Mbps, full
duplex, flow control both
[ 10.097789] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.201432] type=1400 audit(1304345686.088:17): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf"
pid=1231 comm="apparmor_parser"
[ 10.210700] ppdev: user-space parallel port driver
[ 10.333406] ioremap error for 0xcfe90000-0xcfe91000, requested 0x10,
got 0x0
[ 12.151192] usb 1-3: usbfs: interface 0 claimed by usblp while 'usb'
sets config #1
[ 12.673402] Bridge firewalling registered
[ 12.678404] ADDRCONF(NETDEV_UP): virbr0: link is not ready
[ 12.692895] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.719139] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 20.410044] eth0: no IPv6 routers present
[ 23.039563] vboxdrv: Found 6 processor cores.
[ 23.039799] vboxdrv: fAsync=0 offMin=0x445 offMax=0x1807
[ 23.039844] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 23.039845] vboxdrv: Successfully loaded version 4.0.4 (interface
0x00160000).
[ 23.183303] EXT4-fs (md0): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.424792] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 32.039885] hda-intel: IRQ timing workaround is activated for card #1.
Suggest a bigger bdl_pos_adj.
|on and connected modprobe -r xhci_hcd & modprobe xhci_hcd
[ 782.318369] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 50 (level, low) ->
IRQ 50
[ 782.318403] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 782.318406] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 782.318479] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 8
[ 782.868152] xhci_hcd 0000:02:00.0: can't setup
[ 782.868158] xhci_hcd 0000:02:00.0: USB bus 8 deregistered
[ 782.868255] xhci_hcd 0000:02:00.0: PCI INT A disabled
[ 782.868257] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -110
[ 782.868294] xhci_hcd: probe of 0000:02:00.0 failed with error -110
[ 801.550030] usb 5-1: new full speed USB device number 2 using ohci_hcd
[ 816.700075] usb 5-1: device descriptor read/64, error -110
[ 827.010060] hub 5-0:1.0: unable to enumerate USB device on port 1
turn it off ( or disconnect the usb cable),modprobe -r xhci_hcd,modprobe
xhci_hcd,and then turn it on.
[ 840.262351] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 50 (level, low) ->
IRQ 50
[ 840.262402] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 840.262405] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 840.262489] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 8
[ 840.300185] xhci_hcd 0000:02:00.0: irq 50, io mem 0xfbcfe000
[ 840.300242] xhci_hcd 0000:02:00.0: irq 79 for MSI/MSI-X
[ 840.300247] xhci_hcd 0000:02:00.0: irq 80 for MSI/MSI-X
[ 840.300252] xhci_hcd 0000:02:00.0: irq 81 for MSI/MSI-X
[ 840.300256] xhci_hcd 0000:02:00.0: irq 82 for MSI/MSI-X
[ 840.300260] xhci_hcd 0000:02:00.0: irq 83 for MSI/MSI-X
[ 840.300265] xhci_hcd 0000:02:00.0: irq 84 for MSI/MSI-X
[ 840.300269] xhci_hcd 0000:02:00.0: irq 85 for MSI/MSI-X
[ 840.300441] xHCI xhci_add_endpoint called for root hub
[ 840.300443] xHCI xhci_check_bandwidth called for root hub
[ 840.300465] hub 8-0:1.0: USB hub found
[ 840.300471] hub 8-0:1.0: 2 ports detected
[ 840.300522] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 840.300567] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 9
[ 840.350175] xHCI xhci_add_endpoint called for root hub
[ 840.350178] xHCI xhci_check_bandwidth called for root hub
[ 840.350202] hub 9-0:1.0: USB hub found
[ 840.350211] hub 9-0:1.0: 2 ports detected
[ 857.300064] hub 5-0:1.0: unable to enumerate USB device on port 1
[ 857.870126] xhci_hcd 0000:02:00.0: Can't reset device (slot ID 1) in
enabled/disabled state
[ 857.870130] xhci_hcd 0000:02:00.0: Not freeing device rings.
[ 857.870250] usb 9-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 857.892950] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 857.893575] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 857.894199] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 869.535013] usbcore: registered new interface driver uas
[ 869.541564] Initializing USB Mass Storage driver...
[ 869.541753] scsi10 : usb-storage 9-2:1.0
[ 869.541861] usbcore: registered new interface driver usb-storage
[ 869.541863] USB Mass Storage support registered.
[ 870.544803] scsi 10:0:0:0: Direct-Access WDC WD20 EARS-00MVWB0 51.0
PQ: 0 ANSI: 0
[ 870.545251] sd 10:0:0:0: Attached scsi generic sg7 type 0
[ 870.545412] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks:
(2.00 TB/1.81 TiB)
[ 870.545523] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 870.546204] sd 10:0:0:0: [sdg] Write Protect is off
[ 870.546207] sd 10:0:0:0: [sdg] Mode Sense: 23 00 00 00
[ 870.546210] sd 10:0:0:0: [sdg] Assuming drive cache: write through
[ 870.547554] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 870.548144] sd 10:0:0:0: [sdg] Assuming drive cache: write through
[ 870.642542] sdg: sdg1 < sdg5 sdg6 sdg7 sdg8 sdg9 sdg10 sdg11 >
[ 870.643196] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 870.643715] sd 10:0:0:0: [sdg] Assuming drive cache: write through
[ 870.643719] sd 10:0:0:0: [sdg] Attached SCSI disk
[ 870.711341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
lshw
description: Desktop Computer
product: System Product Name
vendor: System manufacturer
version: System Version
serial: System Serial Number
width: 64 bits
capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32
configuration: boot=normal chassis=desktop
uuid=40EC001E-8C00-00DE-C4E8-20CF3071F362
*-core
description: Motherboard
product: Crosshair IV Formula
vendor: ASUSTeK Computer INC.
physical id: 0
version: Rev 1.xx
serial: MB-1234567890
slot: To Be Filled By O.E.M.
*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1102 (08/24/2010)
size: 64KiB
capacity: 1984KiB
capabilities: isa pci pnp upgrade shadowing escd cdboot bootselect
socketedrom edd int13floppy1200 int13floppy720 int13floppy2880
int5printscreen int9keyboard int14serial int17printer int10video acpi
usb ls120boot zipboot biosbootspecification
*-cpu
description: CPU
product: AMD Phenom(tm) II X6 1055T Processor
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: AMD Phenom(tm) II X6 1055T Processor
serial: To Be Filled By O.E.M.
slot: AM3
size: 2800MHz
capacity: 3300MHz
width: 64 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic
sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx
mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc
rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor cx16 popcnt
lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse
3dnowprefetch osvw ibs skinit wdt arat cpb npt lbrv svm_lock nrip_save
pausefilter
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 768KiB
capacity: 768KiB
capabilities: pipeline-burst internal varies
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 3MiB
capacity: 3MiB
capabilities: pipeline-burst internal varies
*-cache:2
description: L3 cache
physical id: 7
slot: L3-Cache
size: 6MiB
capacity: 6MiB
capabilities: pipeline-burst internal varies
*-memory
description: System Memory
physical id: 36
slot: System board or motherboard
size: 8GiB
*-bank:0
description: DIMM Synchronous 667 MHz (1.5 ns)
product: 8JTF25664AZ-1G4D1
vendor: Micron
physical id: 0
serial: 22E15EDA
slot: DIMM0
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:1
description: DIMM Synchronous 667 MHz (1.5 ns)
product: 8JTF25664AZ-1G4D1
vendor: Micron
physical id: 1
serial: 30E15EDA
slot: DIMM1
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:2
description: DIMM Synchronous 667 MHz (1.5 ns)
product: 8JTF25664AZ-1G4D1
vendor: Micron
physical id: 2
serial: 36E15EDA
slot: DIMM2
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-bank:3
description: DIMM Synchronous 667 MHz (1.5 ns)
product: 8JTF25664AZ-1G4D1
vendor: Micron
physical id: 3
serial: 27E15EDA
slot: DIMM3
size: 2GiB
width: 64 bits
clock: 667MHz (1.5ns)
*-pci:0
description: Host bridge
product: RD890 Northbridge only single slot PCI-e GFX Hydra part
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
*-pci:0
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port B)
vendor: ATI Technologies Inc
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:72 ioport:e000(size=4096) memory:fc000000-fe9fffff
ioport:d4000000(size=201326592)
*-display
description: VGA compatible controller
product: GF104 [GeForce GTX 460]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:06:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:24 memory:fc000000-fdffffff memory:d8000000-dfffffff
memory:d4000000-d7ffffff ioport:ec00(size=128) memory:fe980000-fe9fffff
*-multimedia
description: Audio device
product: GF104 High Definition Audio Controller
vendor: nVidia Corporation
physical id: 0.1
bus info: pci@0000:06:00.1
version: a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=HDA Intel latency=0
resources: irq:25 memory:fe97c000-fe97ffff
*-pci:1
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port D)
vendor: ATI Technologies Inc
physical id: 4
bus info: pci@0000:00:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:73 ioport:d000(size=4096) memory:fbf00000-fbffffff
*-storage
description: SATA controller
product: JMB362/JMB363 Serial ATA Controller
vendor: JMicron Technology Corp.
physical id: 0
bus info: pci@0000:05:00.0
logical name: scsi8
version: 03
width: 32 bits
clock: 33MHz
capabilities: storage pm pciexpress ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=0
resources: irq:44 memory:fbffe000-fbffffff
*-cdrom
description: DVD-RAM writer
product: BD-RE BH10LS30
vendor: HL-DT-ST
physical id: 0.0.0
bus info: scsi@8:0.0.0
logical name: /dev/cdrom
logical name: /dev/cdrw
logical name: /dev/dvd
logical name: /dev/dvdrw
logical name: /dev/scd0
logical name: /dev/sr0
version: 1.00
capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: ansiversion=5 status=nodisc
*-ide
description: IDE interface
product: JMB362/JMB363 Serial ATA Controller
vendor: JMicron Technology Corp.
physical id: 0.1
bus info: pci@0000:05:00.1
version: 03
width: 32 bits
clock: 33MHz
capabilities: ide pm bus_master cap_list
configuration: driver=pata_jmicron latency=0
resources: irq:45 ioport:dc00(size=8) ioport:d880(size=4)
ioport:d800(size=8) ioport:d480(size=4) ioport:d400(size=16)
*-pci:2
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port E)
vendor: ATI Technologies Inc
physical id: 5
bus info: pci@0000:00:05.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:74 ioport:c000(size=4096) memory:fbe00000-fbefffff
*-firewire
description: FireWire (IEEE 1394)
product: VT6315 Series Firewire Controller
vendor: VIA Technologies, Inc.
physical id: 0
bus info: pci@0000:04:00.0
version: 01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress ohci bus_master cap_list
configuration: driver=firewire_ohci latency=0
resources: irq:46 memory:fbeff800-fbefffff ioport:c800(size=256)
*-pci:3
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port F)
vendor: ATI Technologies Inc
physical id: 6
bus info: pci@0000:00:06.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:75 ioport:b000(size=4096) memory:fbd00000-fbdfffff
*-network
description: Ethernet interface
product: 88E8059 PCI-E Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth0
version: 11
serial: 20:cf:30:71:f3:62
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom ethernet
physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=sky2
driverversion=1.28 duplex=full firmware=N/A ip=192.168.0.2 latency=0
link=yes multicast=yes port=twisted pair speed=100MB/s
resources: irq:77 memory:fbdfc000-fbdfffff ioport:b800(size=256)
memory:fbdc0000-fbddffff
*-pci:4
description: PCI bridge
product: RD890 PCI to PCI bridge (PCI express gpp port G)
vendor: ATI Technologies Inc
physical id: 7
bus info: pci@0000:00:07.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:76 memory:fbc00000-fbcfffff
*-usb
description: USB Controller
product: uPD720200 USB 3.0 Host Controller
vendor: NEC Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 03
width: 64 bits
clock: 33MHz
capabilities: pm msi msix pciexpress bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:50 memory:fbcfe000-fbcfffff
*-storage
description: SATA controller
product: SB700/SB800 SATA Controller [IDE mode]
vendor: ATI Technologies Inc
physical id: 11
bus info: pci@0000:00:11.0
logical name: scsi4
logical name: scsi5
logical name: scsi6
logical name: scsi7
version: 40
width: 32 bits
clock: 66MHz
capabilities: storage msi ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=64
resources: irq:78 ioport:a000(size=8) ioport:9000(size=4)
ioport:8000(size=8) ioport:7000(size=4) ioport:6000(size=16)
memory:fbbfe000-fbbfe3ff
*-disk:0
description: ATA Disk
product: OCZ-VERTEX
physical id: 0
bus info: scsi@4:0.0.0
logical name: /dev/sdc
version: 1.4
serial: QJ8PT45TN0N926533BS3
size: 29GiB (32GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=4e8b0fb1
*-volume
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@4:0.0.0,1
logical name: /dev/sdc1
version: 1.0
serial: e50c131a-172c-44da-a40c-a058918bc6a0
size: 59GiB
capabilities: primary multi journaled extended_attributes large_files
huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2010-08-16 03:25:03 filesystem=ext4
lastmountpoint=/ïh& ïïïïïïïL)!ïïïï9/ ïïï5ïïïïpïïïïïïïh& ï
modified=2011-04-17 21:55:50 mounted=2011-05-02 15:14:42 state=clean
*-disk:1
description: ATA Disk
product: OCZ-VERTEX
physical id: 1
bus info: scsi@5:0.0.0
logical name: /dev/sdd
version: 1.4
serial: 288113S583JB29CWXG2F
size: 29GiB (32GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=294908b2
*-volume
description: Linux raid autodetect partition
physical id: 1
bus info: scsi@5:0.0.0,1
logical name: /dev/sdd1
capacity: 29GiB
capabilities: primary bootable multi
*-disk:2
description: ATA Disk
product: SAMSUNG HD501LJ
physical id: 2
bus info: scsi@6:0.0.0
logical name: /dev/sde
version: CR10
serial: S0MUJ1EQ158075
size: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=32f332f3
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@6:0.0.0,1
logical name: /dev/sde1
version: 3.1
serial: ee6ab6dc-cffc-9f49-8c56-8df4dc1bf41d
size: 96GiB
capacity: 98GiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2008-12-14 21:23:16
filesystem=ntfs modified_by_chkdsk=true mounted_on_nt4=true
resize_log_file=true state=dirty upgrade_on_mount=true
*-volume:1
description: EXT3 volume
vendor: Linux
physical id: 2
bus info: scsi@6:0.0.0,2
logical name: /dev/sde2
logical name: /boot
version: 1.0
serial: 1be4dc2b-80ef-4dd0-b38d-122663c9cd1a
size: 964MiB
capacity: 964MiB
capabilities: primary journaled extended_attributes large_files recover
ext3 ext2 initialized
configuration: created=2008-02-22 15:56:24 filesystem=ext3 label=/boot
modified=2011-05-02 15:14:42 mount.fstype=ext3
mount.options=rw,noatime,errors=continue,commit=5,barrier=0,data=ordered
mounted=2011-05-02 15:14:42 state=mounted
*-volume:2
description: Linux swap volume
physical id: 3
bus info: scsi@6:0.0.0,3
logical name: /dev/sde3
version: 1
serial: 2331fa66-8135-4368-87cd-23770806c09f
size: 14GiB
capacity: 14GiB
capabilities: primary nofs swap initialized
configuration: filesystem=swap pagesize=4096
*-volume:3
description: Extended partition
physical id: 4
bus info: scsi@6:0.0.0,4
logical name: /dev/sde4
size: 351GiB
capacity: 351GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sde5
capacity: 29GiB
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sde6
capacity: 29GiB
*-logicalvolume:2
description: Linux filesystem partition
physical id: 7
logical name: /dev/sde7
capacity: 292GiB
*-disk:3
description: ATA Disk
product: WDC WD1001FALS-0
vendor: Western Digital
physical id: 3
bus info: scsi@7:0.0.0
logical name: /dev/sdf
version: 05.0
serial: WD-WMATV3778321
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=8d62f774
*-volume:0
description: Windows NTFS volume
physical id: 1
bus info: scsi@7:0.0.0,1
logical name: /dev/sdf1
version: 3.1
serial: ae2e-18d4
size: 98MiB
capacity: 100MiB
capabilities: primary bootable ntfs initialized
configuration: clustersize=4096 created=2010-10-01 09:18:08
filesystem=ntfs label=System Reserved state=clean
*-volume:1
description: Windows NTFS volume
physical id: 2
bus info: scsi@7:0.0.0,2
logical name: /dev/sdf2
version: 3.1
serial: 6c0a7fb2-4491-6848-bb21-45cea20607c9
size: 488GiB
capacity: 488GiB
capabilities: primary ntfs initialized
configuration: clustersize=4096 created=2010-10-01 09:18:10
filesystem=ntfs state=clean
*-volume:2
description: EXT3 volume
vendor: Linux
physical id: 3
bus info: scsi@7:0.0.0,3
logical name: /dev/sdf3
logical name: /media/raid2/Downloads
version: 1.0
serial: 177d978b-300d-4965-ae84-df16f6fe45ad
size: 443GiB
capacity: 443GiB
capabilities: primary journaled extended_attributes large_files recover
ext3 ext2 initialized
configuration: created=2010-09-23 23:39:09 filesystem=ext3
modified=2011-05-02 15:14:44 mount.fstype=ext3
mount.options=rw,relatime,errors=continue,commit=5,barrier=0,data=ordered mounted=2011-05-02
15:14:44 state=mounted
*-usb:0
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fbbf7000-fbbf7fff
*-usb:1
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:fbbfe400-fbbfe4ff
*-usb:2
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fbbfc000-fbbfcfff
*-usb:3
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:fbbfe800-fbbfe8ff
*-serial
description: SMBus
product: SBx00 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 42
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0
*-ide
description: IDE interface
product: SB700/SB800 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
logical name: scsi2
version: 40
width: 32 bits
clock: 66MHz
capabilities: ide bus_master emulated
configuration: driver=pata_atiixp latency=64
resources: irq:17 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8)
ioport:376 ioport:ff00(size=16)
*-disk:0
description: ATA Disk
product: Hitachi HDT72101
vendor: Hitachi
physical id: 0.0.0
bus info: scsi@2:0.0.0
logical name: /dev/sda
version: ST6O
serial: STF604MH0MRYUB
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00057d4b
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: 7bd98fe9-3b34-438f-a742-486077f10622
size: 93GiB
capacity: 93GiB
capabilities: primary bootable multi journaled extended_attributes
large_files recover ext3 ext2 initialized
configuration: created=2009-01-30 12:40:01 filesystem=ext3
modified=2011-05-02 15:14:43 mounted=2011-05-02 15:14:43 state=clean
*-volume:1
description: EXT3 volume
vendor: Linux
physical id: 2
bus info: scsi@2:0.0.0,2
logical name: /dev/sda2
version: 1.0
serial: 7a1abe6a-ee12-40ad-8998-41e446000d82
size: 838GiB
capacity: 838GiB
capabilities: primary multi journaled extended_attributes large_files
recover ext3 ext2 initialized
configuration: created=2009-01-30 12:40:30 filesystem=ext3
modified=2011-05-02 15:14:44 mounted=2011-05-02 15:14:44 state=clean
*-disk:1
description: ATA Disk
product: Hitachi HDT72101
vendor: Hitachi
physical id: 0.1.0
bus info: scsi@2:0.1.0
logical name: /dev/sdb
version: ST6O
serial: STF604MH0P7RJB
size: 931GiB (1TB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=34e712e3
*-volume:0
description: EXT3 volume
vendor: Linux
physical id: 1
bus info: scsi@2:0.1.0,1
logical name: /dev/sdb1
version: 1.0
serial: 7bd98fe9-3b34-438f-a742-486077f10622
size: 93GiB
capacity: 93GiB
capabilities: primary bootable multi journaled extended_attributes
large_files recover ext3 ext2 initialized
configuration: created=2009-01-30 12:40:01 filesystem=ext3
modified=2011-05-02 15:14:43 mounted=2011-05-02 15:14:43 state=clean
*-volume:1
description: EXT3 volume
vendor: Linux
physical id: 2
bus info: scsi@2:0.1.0,2
logical name: /dev/sdb2
version: 1.0
serial: 7a1abe6a-ee12-40ad-8998-41e446000d82
size: 838GiB
capacity: 838GiB
capabilities: primary multi journaled extended_attributes large_files
recover ext3 ext2 initialized
configuration: created=2009-01-30 12:40:30 filesystem=ext3
modified=2011-05-02 15:14:44 mounted=2011-05-02 15:14:44 state=clean
*-multimedia
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 40
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=HDA Intel latency=64
resources: irq:16 memory:fbbf8000-fbbfbfff
*-isa
description: ISA bridge
product: SB700/SB800 LPC host controller
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 40
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:5
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 40
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master
*-usb:4
description: USB Controller
product: SB700/SB800 USB OHCI2 Controller
vendor: ATI Technologies Inc
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fbbfd000-fbbfdfff
*-usb:5
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 16
bus info: pci@0000:00:16.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:fbbff000-fbbfffff
*-usb:6
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 16.2
bus info: pci@0000:00:16.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:fbbfec00-fbbfecff
*-pci:1
description: Host bridge
product: Family 10h Processor HyperTransport Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Family 10h Processor Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Family 10h Processor DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Family 10h Processor Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
configuration: driver=k10temp
resources: irq:0
*-pci:5
description: Host bridge
product: Family 10h Processor Link Control
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
*-scsi
physical id: 1
bus info: usb@9:2
logical name: scsi10
capabilities: emulated scsi-host
configuration: driver=usb-storage
*-disk
description: SCSI Disk
physical id: 0.0.0
bus info: scsi@10:0.0.0
logical name: /dev/sdg
size: 1863GiB (2TB)
capabilities: partitioned partitioned:dos
configuration: signature=0008cda2
*-volume
description: Extended partition
physical id: 1
bus info: scsi@10:0.0.0,1
logical name: /dev/sdg1
size: 1863GiB
capacity: 1863GiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume:0
description: Linux filesystem partition
physical id: 5
logical name: /dev/sdg5
capacity: 100GiB
*-logicalvolume:1
description: Linux filesystem partition
physical id: 6
logical name: /dev/sdg6
capacity: 890GiB
*-logicalvolume:2
description: Linux filesystem partition
physical id: 7
logical name: /dev/sdg7
capacity: 42GiB
*-logicalvolume:3
description: Linux filesystem partition
physical id: 8
logical name: /dev/sdg8
capacity: 60GiB
*-logicalvolume:4
description: Linux filesystem partition
physical id: 9
logical name: /dev/sdg9
capacity: 42GiB
*-logicalvolume:5
description: Linux filesystem partition
physical id: a
logical name: /dev/sdg10
capacity: 40GiB
*-logicalvolume:6
description: Linux filesystem partition
physical id: b
logical name: /dev/sdg11
capacity: 490GiB
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: vboxnet0
serial: 0a:00:27:00:00:00
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
