On Tuesday 10 July 2012 12:22 PM, ABRAHAM, KISHON VIJAY wrote:
+TWL4030 USB PHY AND COMPARATOR
>> + - compatible : Should be "ti,twl4030-usb"
>> + - interrupts : The interrupt numbers to the cpu should be specified.
>> First
>> + interrupt number is the otg interrupt number that raises ID interrupts
>> + and VBUS interrupts. The second interrupt number is optional.
>> + -<supply-name>-supply : phandle to the regulator device tree node.
>> +<supply-name> should be vusb1v5, vusb1v8 and vusb3v1
>> + - usb_mode : The mode used by the phy to connect to the controller. "1"
>> + specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode.
>
>
> Are these standard usb phy modes or something specific to the twl4030
> usb phy?
These are standard modes used to connect the phy to the controller. I
think it's used by other chips other than twl4030 (Something in
am35xx??).
So would it make sense to document these bindings independent of a given
phy and a given controller, so it could be reused and not duplicated in
various forms for various different controllers.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
