RE: [PATCH 2/3] usb: musb: dsps: add phy control logic to glue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
> On Tue, Jul 10, 2012 at 11:35 AM, Gupta, Ajay Kumar <ajay.gupta@xxxxxx>
> wrote:
> > Hi,
> >>
> >> On Mon, Jul 9, 2012 at 7:18 PM, Damodar Santhapuri <x0132156@xxxxxx>
> >> wrote:
> >> > From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> >> >
> >> > AM335x uses NOP transceiver driver and need to enable builtin PHY
> >> > by writing into usb_ctrl register available in system control
> >> > module register space. This is being added at musb glue driver
> >> > layer untill a separate system control module driver is available.
> >> >
> >> > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> >> > Signed-off-by: Damodar Santhapuri <x0132156@xxxxxx>
> >> > ---
> >> >  arch/arm/mach-omap2/board-ti8168evm.c   |    1 -
> >> >  arch/arm/mach-omap2/omap_phy_internal.c |   35 ------------
> >> >  arch/arm/plat-omap/include/plat/usb.h   |    5 +-
> >> >  drivers/usb/musb/musb_dsps.c            |   88
> >> +++++++++++++++++++++++++------
> >> >  4 files changed, 74 insertions(+), 55 deletions(-)
> >> >
> >> > diff --git a/arch/arm/mach-omap2/board-ti8168evm.c
> b/arch/arm/mach-
> >> omap2/board-ti8168evm.c
> >> > index d4c8392..0c7c098 100644
> >> > --- a/arch/arm/mach-omap2/board-ti8168evm.c
> >> > +++ b/arch/arm/mach-omap2/board-ti8168evm.c
> >> > @@ -26,7 +26,6 @@
> >> >  #include <plat/usb.h>
> >> >
> >> >  static struct omap_musb_board_data musb_board_data = {
> >> > -       .set_phy_power  = ti81xx_musb_phy_power,
> >> >         .interface_type = MUSB_INTERFACE_ULPI,
> >> >         .mode           = MUSB_OTG,
> >> >         .power          = 500,
> >> > diff --git a/arch/arm/mach-omap2/omap_phy_internal.c
> b/arch/arm/mach-
> >> omap2/omap_phy_internal.c
> >> > index d52651a..d80bb16 100644
> >> > --- a/arch/arm/mach-omap2/omap_phy_internal.c
> >> > +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> >> > @@ -254,38 +254,3 @@ void am35x_set_mode(u8 musb_mode)
> >> >
> >> >         omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> >> >  }
> >> > -
> >> > -void ti81xx_musb_phy_power(u8 on)
> >> > -{
> >> > -       void __iomem *scm_base = NULL;
> >> > -       u32 usbphycfg;
> >> > -
> >> > -       scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
> >> > -       if (!scm_base) {
> >> > -               pr_err("system control module ioremap failed\n");
> >> > -               return;
> >> > -       }
> >> > -
> >> > -       usbphycfg = __raw_readl(scm_base + USBCTRL0);
> >> > -
> >> > -       if (on) {
> >> > -               if (cpu_is_ti816x()) {
> >> > -                       usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> >> > -                       usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> >> > -               } else if (cpu_is_ti814x()) {
> >> > -                       usbphycfg &= ~(USBPHY_CM_PWRDN |
> >> USBPHY_OTG_PWRDN
> >> > -                               | USBPHY_DPINPUT |
> USBPHY_DMINPUT);
> >> > -                       usbphycfg |= (USBPHY_OTGVDET_EN |
> >> USBPHY_OTGSESSEND_EN
> >> > -                               | USBPHY_DPOPBUFCTL |
> >> USBPHY_DMOPBUFCTL);
> >> > -               }
> >> > -       } else {
> >> > -               if (cpu_is_ti816x())
> >> > -                       usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> >> > -               else if (cpu_is_ti814x())
> >> > -                       usbphycfg |= USBPHY_CM_PWRDN |
> >> USBPHY_OTG_PWRDN;
> >> > -
> >> > -       }
> >> > -       __raw_writel(usbphycfg, scm_base + USBCTRL0);
> >> > -
> >> > -       iounmap(scm_base);
> >> > -}
> >> > diff --git a/arch/arm/plat-omap/include/plat/usb.h
> b/arch/arm/plat-
> >> omap/include/plat/usb.h
> >> > index 548a4c8..c2aa4ae 100644
> >> > --- a/arch/arm/plat-omap/include/plat/usb.h
> >> > +++ b/arch/arm/plat-omap/include/plat/usb.h
> >> > @@ -95,7 +95,6 @@ extern void am35x_musb_reset(void);
> >> >  extern void am35x_musb_phy_power(u8 on);
> >> >  extern void am35x_musb_clear_irq(void);
> >> >  extern void am35x_set_mode(u8 musb_mode);
> >> > -extern void ti81xx_musb_phy_power(u8 on);
> >> >
> >> >  /* AM35x */
> >> >  /* USB 2.0 PHY Control */
> >> > @@ -120,8 +119,8 @@ extern void ti81xx_musb_phy_power(u8 on);
> >> >  #define CONF2_DATPOL           (1 << 1)
> >> >
> >> >  /* TI81XX specific definitions */
> >> > -#define USBCTRL0       0x620
> >> > -#define USBSTAT0       0x624
> >> > +#define MUSB_USBSS_REV_816X    0x9
> >> > +#define MUSB_USBSS_REV_814X    0xb
> >> >
> >> >  /* TI816X PHY controls bits */
> >> >  #define TI816X_USBPHY0_NORMAL_MODE     (1 << 0)
> >> > diff --git a/drivers/usb/musb/musb_dsps.c
> >> b/drivers/usb/musb/musb_dsps.c
> >> > index 494772f..f7271c3 100644
> >> > --- a/drivers/usb/musb/musb_dsps.c
> >> > +++ b/drivers/usb/musb/musb_dsps.c
> >> > @@ -115,9 +115,46 @@ struct dsps_glue {
> >> >         struct platform_device *musb;   /* child musb pdev */
> >> >         const struct dsps_musb_wrapper *wrp; /* wrapper register
> >> offsets */
> >> >         struct timer_list timer;        /* otg_workaround timer */
> >> > +       u32 __iomem *usb_ctrl;
> >> > +       u8      usbss_rev;
> >> >  };
> >> >
> >> >  /**
> >> > + * musb_dsps_phy_control - phy on/off
> >> > + * @glue: struct dsps_glue *
> >> > + * @on: flag for phy to be switched on or off
> >> > + *
> >> > + * This is to enable the PHY using usb_ctrl register in system
> >> control
> >> > + * module space.
> >> > + *
> >> > + * XXX: This function will be removed once we have a seperate
> driver
> >> for
> >> %s/seperate/separate
> >> > + * control module
> >> > + */
> >> > +static void musb_dsps_phy_control(struct dsps_glue *glue, u8 on)
> >> > +{
> >> > +       u32 usbphycfg;
> >> > +
> >> > +       usbphycfg = __raw_readl(glue->usb_ctrl);
> >>
> >> How about using readl instead of __raw_readl here and below?
> >> > +
> >> > +       if (on) {
> >> > +               if (glue->usbss_rev == MUSB_USBSS_REV_816X) {
> >> > +                       usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> >> > +                       usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> >> > +               } else if (glue->usbss_rev == MUSB_USBSS_REV_814X)
> {
> >> > +                       usbphycfg &= ~(USBPHY_CM_PWRDN |
> >> USBPHY_OTG_PWRDN
> >> > +                               | USBPHY_DPINPUT |
> USBPHY_DMINPUT);
> >> > +                       usbphycfg |= (USBPHY_OTGVDET_EN |
> >> USBPHY_OTGSESSEND_EN
> >> > +                               | USBPHY_DPOPBUFCTL |
> >> USBPHY_DMOPBUFCTL);
> >> > +               }
> >> > +       } else {
> >> > +               if (glue->usbss_rev == MUSB_USBSS_REV_816X)
> >> > +                       usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> >> > +               else if (glue->usbss_rev == MUSB_USBSS_REV_814X)
> >> > +                       usbphycfg |= USBPHY_CM_PWRDN |
> >> USBPHY_OTG_PWRDN;
> >> > +       }
> >> > +       __raw_writel(usbphycfg, glue->usb_ctrl);
> >> only writel()?
> >> > +}
> >> > +/**
> >> >   * dsps_musb_enable - enable interrupts
> >> >   */
> >> >  static void dsps_musb_enable(struct musb *musb)
> >> > @@ -363,11 +400,9 @@ static irqreturn_t dsps_interrupt(int irq,
> void
> >> *hci)
> >> >  static int dsps_musb_init(struct musb *musb)
> >> >  {
> >> >         struct device *dev = musb->controller;
> >> > -       struct musb_hdrc_platform_data *plat = dev->platform_data;
> >> >         struct platform_device *pdev = to_platform_device(dev-
> >> >parent);
> >> >         struct dsps_glue *glue = platform_get_drvdata(pdev);
> >> >         const struct dsps_musb_wrapper *wrp = glue->wrp;
> >> > -       struct omap_musb_board_data *data = plat->board_data;
> >> >         void __iomem *reg_base = musb->ctrl_base;
> >> >         u32 rev, val;
> >> >         int status;
> >> > @@ -395,8 +430,7 @@ static int dsps_musb_init(struct musb *musb)
> >> >         dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
> >> >
> >> >         /* Start the on-chip PHY and its PLL. */
> >> > -       if (data->set_phy_power)
> >> > -               data->set_phy_power(1);
> >> > +       musb_dsps_phy_control(glue, 1);
> >> >
> >> >         musb->isr = dsps_interrupt;
> >> >
> >> > @@ -418,8 +452,6 @@ err0:
> >> >  static int dsps_musb_exit(struct musb *musb)
> >> >  {
> >> >         struct device *dev = musb->controller;
> >> > -       struct musb_hdrc_platform_data *plat = dev->platform_data;
> >> > -       struct omap_musb_board_data *data = plat->board_data;
> >> >         struct platform_device *pdev = to_platform_device(dev-
> >> >parent);
> >> >         struct dsps_glue *glue = platform_get_drvdata(pdev);
> >> >
> >> > @@ -427,8 +459,7 @@ static int dsps_musb_exit(struct musb *musb)
> >> >                 del_timer_sync(&glue->timer);
> >> >
> >> >         /* Shutdown the on-chip PHY and its PLL. */
> >> > -       if (data->set_phy_power)
> >> > -               data->set_phy_power(0);
> >> > +       musb_dsps_phy_control(glue, 0);
> >> >
> >> >         /* NOP driver needs change if supporting dual instance */
> >> >         usb_put_phy(musb->xceiv);
> >> > @@ -460,6 +491,22 @@ static int __devinit
> >> dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
> >> >         char res_name[10];
> >> >         int ret;
> >> >
> >> > +       /* get memory resource for usb control register */
> >> > +       sprintf(res_name, "usb_ctrl%d", id);
> >> > +       res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> >> res_name);
> >> Avoid getting resource by name.. With dt, you wont be able to do
> >> those..
> >
> > When we are completely on DT then this would anyways go and we can
> > get these resource data for each usb port from DT APIs.
> 
> Even with dt, you will still get the resources using
> platform_get_resource() API's.. So why not have it that way from the
> beginning itself..

Ok got it. We will post an updated patch.

Ajay 
> 
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux