Hi,
>
> On Mon, Jul 9, 2012 at 7:18 PM, Damodar Santhapuri <x0132156@xxxxxx>
> wrote:
> > From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> >
> > AM335x uses NOP transceiver driver and need to enable builtin PHY
> > by writing into usb_ctrl register available in system control
> > module register space. This is being added at musb glue driver
> > layer untill a separate system control module driver is available.
> >
> > Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
> > Signed-off-by: Damodar Santhapuri <x0132156@xxxxxx>
> > ---
> > arch/arm/mach-omap2/board-ti8168evm.c | 1 -
> > arch/arm/mach-omap2/omap_phy_internal.c | 35 ------------
> > arch/arm/plat-omap/include/plat/usb.h | 5 +-
> > drivers/usb/musb/musb_dsps.c | 88
> +++++++++++++++++++++++++------
> > 4 files changed, 74 insertions(+), 55 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-
> omap2/board-ti8168evm.c
> > index d4c8392..0c7c098 100644
> > --- a/arch/arm/mach-omap2/board-ti8168evm.c
> > +++ b/arch/arm/mach-omap2/board-ti8168evm.c
> > @@ -26,7 +26,6 @@
> > #include <plat/usb.h>
> >
> > static struct omap_musb_board_data musb_board_data = {
> > - .set_phy_power = ti81xx_musb_phy_power,
> > .interface_type = MUSB_INTERFACE_ULPI,
> > .mode = MUSB_OTG,
> > .power = 500,
> > diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-
> omap2/omap_phy_internal.c
> > index d52651a..d80bb16 100644
> > --- a/arch/arm/mach-omap2/omap_phy_internal.c
> > +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> > @@ -254,38 +254,3 @@ void am35x_set_mode(u8 musb_mode)
> >
> > omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> > }
> > -
> > -void ti81xx_musb_phy_power(u8 on)
> > -{
> > - void __iomem *scm_base = NULL;
> > - u32 usbphycfg;
> > -
> > - scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
> > - if (!scm_base) {
> > - pr_err("system control module ioremap failed\n");
> > - return;
> > - }
> > -
> > - usbphycfg = __raw_readl(scm_base + USBCTRL0);
> > -
> > - if (on) {
> > - if (cpu_is_ti816x()) {
> > - usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> > - usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> > - } else if (cpu_is_ti814x()) {
> > - usbphycfg &= ~(USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN
> > - | USBPHY_DPINPUT | USBPHY_DMINPUT);
> > - usbphycfg |= (USBPHY_OTGVDET_EN |
> USBPHY_OTGSESSEND_EN
> > - | USBPHY_DPOPBUFCTL |
> USBPHY_DMOPBUFCTL);
> > - }
> > - } else {
> > - if (cpu_is_ti816x())
> > - usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> > - else if (cpu_is_ti814x())
> > - usbphycfg |= USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN;
> > -
> > - }
> > - __raw_writel(usbphycfg, scm_base + USBCTRL0);
> > -
> > - iounmap(scm_base);
> > -}
> > diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-
> omap/include/plat/usb.h
> > index 548a4c8..c2aa4ae 100644
> > --- a/arch/arm/plat-omap/include/plat/usb.h
> > +++ b/arch/arm/plat-omap/include/plat/usb.h
> > @@ -95,7 +95,6 @@ extern void am35x_musb_reset(void);
> > extern void am35x_musb_phy_power(u8 on);
> > extern void am35x_musb_clear_irq(void);
> > extern void am35x_set_mode(u8 musb_mode);
> > -extern void ti81xx_musb_phy_power(u8 on);
> >
> > /* AM35x */
> > /* USB 2.0 PHY Control */
> > @@ -120,8 +119,8 @@ extern void ti81xx_musb_phy_power(u8 on);
> > #define CONF2_DATPOL (1 << 1)
> >
> > /* TI81XX specific definitions */
> > -#define USBCTRL0 0x620
> > -#define USBSTAT0 0x624
> > +#define MUSB_USBSS_REV_816X 0x9
> > +#define MUSB_USBSS_REV_814X 0xb
> >
> > /* TI816X PHY controls bits */
> > #define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
> > diff --git a/drivers/usb/musb/musb_dsps.c
> b/drivers/usb/musb/musb_dsps.c
> > index 494772f..f7271c3 100644
> > --- a/drivers/usb/musb/musb_dsps.c
> > +++ b/drivers/usb/musb/musb_dsps.c
> > @@ -115,9 +115,46 @@ struct dsps_glue {
> > struct platform_device *musb; /* child musb pdev */
> > const struct dsps_musb_wrapper *wrp; /* wrapper register
> offsets */
> > struct timer_list timer; /* otg_workaround timer */
> > + u32 __iomem *usb_ctrl;
> > + u8 usbss_rev;
> > };
> >
> > /**
> > + * musb_dsps_phy_control - phy on/off
> > + * @glue: struct dsps_glue *
> > + * @on: flag for phy to be switched on or off
> > + *
> > + * This is to enable the PHY using usb_ctrl register in system
> control
> > + * module space.
> > + *
> > + * XXX: This function will be removed once we have a seperate driver
> for
> %s/seperate/separate
> > + * control module
> > + */
> > +static void musb_dsps_phy_control(struct dsps_glue *glue, u8 on)
> > +{
> > + u32 usbphycfg;
> > +
> > + usbphycfg = __raw_readl(glue->usb_ctrl);
>
> How about using readl instead of __raw_readl here and below?
> > +
> > + if (on) {
> > + if (glue->usbss_rev == MUSB_USBSS_REV_816X) {
> > + usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> > + usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> > + } else if (glue->usbss_rev == MUSB_USBSS_REV_814X) {
> > + usbphycfg &= ~(USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN
> > + | USBPHY_DPINPUT | USBPHY_DMINPUT);
> > + usbphycfg |= (USBPHY_OTGVDET_EN |
> USBPHY_OTGSESSEND_EN
> > + | USBPHY_DPOPBUFCTL |
> USBPHY_DMOPBUFCTL);
> > + }
> > + } else {
> > + if (glue->usbss_rev == MUSB_USBSS_REV_816X)
> > + usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
> > + else if (glue->usbss_rev == MUSB_USBSS_REV_814X)
> > + usbphycfg |= USBPHY_CM_PWRDN |
> USBPHY_OTG_PWRDN;
> > + }
> > + __raw_writel(usbphycfg, glue->usb_ctrl);
> only writel()?
> > +}
> > +/**
> > * dsps_musb_enable - enable interrupts
> > */
> > static void dsps_musb_enable(struct musb *musb)
> > @@ -363,11 +400,9 @@ static irqreturn_t dsps_interrupt(int irq, void
> *hci)
> > static int dsps_musb_init(struct musb *musb)
> > {
> > struct device *dev = musb->controller;
> > - struct musb_hdrc_platform_data *plat = dev->platform_data;
> > struct platform_device *pdev = to_platform_device(dev-
> >parent);
> > struct dsps_glue *glue = platform_get_drvdata(pdev);
> > const struct dsps_musb_wrapper *wrp = glue->wrp;
> > - struct omap_musb_board_data *data = plat->board_data;
> > void __iomem *reg_base = musb->ctrl_base;
> > u32 rev, val;
> > int status;
> > @@ -395,8 +430,7 @@ static int dsps_musb_init(struct musb *musb)
> > dsps_writel(reg_base, wrp->control, (1 << wrp->reset));
> >
> > /* Start the on-chip PHY and its PLL. */
> > - if (data->set_phy_power)
> > - data->set_phy_power(1);
> > + musb_dsps_phy_control(glue, 1);
> >
> > musb->isr = dsps_interrupt;
> >
> > @@ -418,8 +452,6 @@ err0:
> > static int dsps_musb_exit(struct musb *musb)
> > {
> > struct device *dev = musb->controller;
> > - struct musb_hdrc_platform_data *plat = dev->platform_data;
> > - struct omap_musb_board_data *data = plat->board_data;
> > struct platform_device *pdev = to_platform_device(dev-
> >parent);
> > struct dsps_glue *glue = platform_get_drvdata(pdev);
> >
> > @@ -427,8 +459,7 @@ static int dsps_musb_exit(struct musb *musb)
> > del_timer_sync(&glue->timer);
> >
> > /* Shutdown the on-chip PHY and its PLL. */
> > - if (data->set_phy_power)
> > - data->set_phy_power(0);
> > + musb_dsps_phy_control(glue, 0);
> >
> > /* NOP driver needs change if supporting dual instance */
> > usb_put_phy(musb->xceiv);
> > @@ -460,6 +491,22 @@ static int __devinit
> dsps_create_musb_pdev(struct dsps_glue *glue, u8 id)
> > char res_name[10];
> > int ret;
> >
> > + /* get memory resource for usb control register */
> > + sprintf(res_name, "usb_ctrl%d", id);
> > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> res_name);
> Avoid getting resource by name.. With dt, you wont be able to do
> those..
When we are completely on DT then this would anyways go and we can
get these resource data for each usb port from DT APIs.
Thanks,
Ajay
>
> Thanks
> Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
