On Sat, 07 Jul 2012 19:23:08 -0700, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
wrote:
roothub.portstatus [4] 0x00000303 LSDA PPS PES CCS
roothub.portstatus [5] 0x00000303 LSDA PPS PES CCS
roothub.portstatus [6] 0x00000101 PPS CCS
That's normal, except for the status of port 6 (which actually is port
7, since we normally count ports starting from 1). The port shows
Current Connect Status, so something is connected to it -- but what?
It looks like it was my pendrive. Disconnecting the mouse and keyboard
cleared CCS on [4] and [5] (not necesariliy in that order).
Removing my pen drive cleared CCS on [6].
This is ohci/*/registers without my pendrive.
[Sat Jul 07 23:24:21 -0700 -- alvarezp@octavio:/sys/kernel/debug/usb]
$ cat ohci/0000\:00\:0b.0/registers
bus pci, device 0000:00:0b.0
OHCI Host Controller
ohci_hcd
OHCI 1.0, NO legacy support registers, rh state running
control 0x68f RWE RWC HCFS=operational IE PLE CBSR=3
cmdstatus 0x00000 SOC=0
intrstatus 0x00000024 FNO SF
intrenable 0x8000004a MIE RHSC RD WDH
ed_controlhead 2ed43000
hcca frame 0x438b
fmintvl 0x27782edf FSMPS=0x2778 FI=0x2edf
fmremaining 0x00000819 FR=0x0819
periodicstart 0x2a2f
lsthresh 0x0628
hub poll timer off
roothub.a 01000208 POTPGT=1 NPS NDP=8(8)
roothub.b 00000000 PPCM=0000 DR=0000
roothub.status 00008000 DRWE
roothub.portstatus [0] 0x00000100 PPS
roothub.portstatus [1] 0x00000100 PPS
roothub.portstatus [2] 0x00000100 PPS
roothub.portstatus [3] 0x00000100 PPS
roothub.portstatus [4] 0x00000303 LSDA PPS PES CCS
roothub.portstatus [5] 0x00000303 LSDA PPS PES CCS
roothub.portstatus [6] 0x00000100 PPS
roothub.portstatus [7] 0x00000100 PPS
FYI, bisecting and other testing was done pretty much without my
pendrive all the time.
I just tested suspend, just for the sake of it, and it still
wakes up right after sleep.
Can you post a complete dmesg log showing bootup with CONFIG_USB_DEBUG
enabled?
Sure. This is it, up to second 178 (last msg is in 81), before pushing the
suspend button.
(done without my pen drive)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.0+ (alvarezp@octavio) (gcc version 4.7.1
(Debian 4.7.1-2) ) #38 SMP Sat Jul 7 11:10:13 PDT 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfef0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bfef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfef3000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5NSLI, BIOS
ASUS P5NSLI ACPI BIOS Revision 1801 11/18/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0xbfef0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5d50] f5d50
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000002f1fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 002f000000 page 2M
[ 0.000000] 002f000000 - 002f1fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 2f1fe000 @
19fa000-1a00000
[ 0.000000] RAMDISK: 36c0a000 - 375fd000
[ 0.000000] Allocated new RAMDISK: 2e80b000 - 2f1fd777
[ 0.000000] Move RAMDISK from 0000000036c0a000 - 00000000375fc776 to
2e80b000 - 2f1fd776
[ 0.000000] ACPI: RSDP 000f7900 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT bfef30c0 0004C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: FACP bfefa600 000F4 (v03 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: DSDT bfef3240 07354 (v01 NVIDIA ASUSACPI 00001000
MSFT 03000000)
[ 0.000000] ACPI: FACS bfef0000 00040
[ 0.000000] ACPI: HPET bfefa840 00038 (v01 Nvidia ASUSACPI 42302E31
AWRD 00000098)
[ 0.000000] ACPI: MCFG bfefa8c0 0003C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: APIC bfefa740 0008E (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: SSDT bfefae20 0032C (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2316MB HIGHMEM available.
[ 0.000000] 753MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 2f1fe000
[ 0.000000] low ram: 0 - 2f1fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0002f1fe
[ 0.000000] HighMem 0x0002f1fe -> 0x000bfef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfef0
[ 0.000000] On node 0 totalpages: 786047
[ 0.000000] free_area_init_node: node 0, pgdat c1425380, node_mem_map
ed00a200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1476 pages used for memmap
[ 0.000000] Normal zone: 187450 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4634 pages used for memmap
[ 0.000000] HighMem zone: 588504 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap:
bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @ecc00000 s32384 r0 d20864
u524288
[ 0.000000] pcpu-alloc: s32384 r0 d20864 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 779905
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.3.0+
root=UUID=f8b60c34-b27c-4517-be16-efe785260da8 ro quiet splash vmalloc=256M
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 6289152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (0002f1fe:000bfef0)
[ 0.000000] Memory: 3096900k/3144640k available (2911k kernel code,
47288k reserved, 1364k data, 408k init, 2372552k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xef9fe000 - 0xff9fe000 ( 256 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef1fe000 ( 753 MB)
[ 0.000000] .init : 0xc142d000 - 0xc1493000 ( 408 kB)
[ 0.000000] .data : 0xc12d7e9a - 0xc142cf80 (1364 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12d7e9a (2911 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=ec006000 soft=ec008000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1799.875 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3599.75 BogoMIPS (lpj=7199500)
[ 0.004007] pid_max: default: 32768 minimum: 301
[ 0.004049] Security Framework initialized
[ 0.004053] AppArmor: AppArmor disabled by boot time parameter
[ 0.004072] Mount-cache hash table entries: 512
[ 0.004202] Initializing cgroup subsys cpuacct
[ 0.004205] Initializing cgroup subsys memory
[ 0.004215] Initializing cgroup subsys devices
[ 0.004217] Initializing cgroup subsys freezer
[ 0.004220] Initializing cgroup subsys net_cls
[ 0.004222] Initializing cgroup subsys blkio
[ 0.004229] Initializing cgroup subsys perf_event
[ 0.004260] CPU: Physical Processor ID: 0
[ 0.004262] CPU: Processor Core ID: 0
[ 0.004265] mce: CPU supports 6 MCE banks
[ 0.004274] CPU0: Thermal monitoring enabled (TM2)
[ 0.004277] using mwait in idle threads.
[ 0.004762] ACPI: Core revision 20120111
[ 0.012054] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012567] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.020001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.020001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.020001] ..... (found apic 0 pin 0) ...
[ 0.062361] ....... works.
[ 0.062363] CPU0: Intel(R) Core(TM)2 CPU 4300 @ 1.80GHz
stepping 02
[ 0.064003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU
driver.
[ 0.064003] PEBS disabled due to CPU errata.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] CPU 1 irqstacks, hard=ec0d4000 soft=ec0d6000
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.072050] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072093] Brought up 2 CPUs
[ 0.072096] Total of 2 processors activated (7199.50 BogoMIPS).
[ 0.076098] devtmpfs: initialized
[ 0.076208] PM: Registering ACPI NVS region at bfef0000 (12288 bytes)
[ 0.076230] print_constraints: dummy:
[ 0.076298] NET: Registered protocol family 16
[ 0.076419] ACPI: bus type pci registered
[ 0.076499] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.076503] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in
E820
[ 0.076505] PCI: Using MMCONFIG for extended config space
[ 0.076508] PCI: Using configuration type 1 for base access
[ 0.077096] bio: create slab <bio-0> at 0
[ 0.077096] ACPI: Added _OSI(Module Device)
[ 0.077096] ACPI: Added _OSI(Processor Device)
[ 0.077096] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.077096] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.080473] ACPI: EC: Look up EC in DSDT
[ 0.087264] ACPI: SSDT bfefa940 00175 (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.087654] ACPI: Dynamic OEM Table Load:
[ 0.087658] ACPI: SSDT (null) 00175 (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.087828] ACPI: SSDT bfefad50 000CE (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.088219] ACPI: Dynamic OEM Table Load:
[ 0.088223] ACPI: SSDT (null) 000CE (v01 Nvidia ASUSACPI 42302E31
AWRD 00000000)
[ 0.088604] ACPI: Interpreter enabled
[ 0.088621] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.088648] ACPI: Using IOAPIC for interrupt routing
[ 0.096193] ACPI: No dock devices found.
[ 0.096202] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.096265] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.096349] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.096352] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.096356] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[ 0.096359] pci_root PNP0A08:00: host bridge window [mem
0x000c0000-0x000dffff]
[ 0.096363] pci_root PNP0A08:00: host bridge window [mem
0xbff00000-0xfebfffff]
[ 0.096408] PCI host bridge to bus 0000:00
[ 0.096411] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.096414] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.096417] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff]
[ 0.096420] pci_bus 0000:00: root bus resource [mem
0x000c0000-0x000dffff]
[ 0.096423] pci_bus 0000:00: root bus resource [mem
0xbff00000-0xfebfffff]
[ 0.096436] pci 0000:00:00.0: [10de:0071] type 0 class 0x000600
[ 0.096491] pci 0000:00:00.1: [10de:007f] type 0 class 0x000500
[ 0.096542] pci 0000:00:00.2: [10de:0075] type 0 class 0x000500
[ 0.096602] pci 0000:00:00.3: [10de:006f] type 0 class 0x000500
[ 0.096662] pci 0000:00:00.4: [10de:00b4] type 0 class 0x000500
[ 0.096727] pci 0000:00:01.0: [10de:0076] type 0 class 0x000500
[ 0.096777] pci 0000:00:01.1: [10de:0078] type 0 class 0x000500
[ 0.096828] pci 0000:00:01.2: [10de:0079] type 0 class 0x000500
[ 0.096878] pci 0000:00:01.3: [10de:007a] type 0 class 0x000500
[ 0.096929] pci 0000:00:01.4: [10de:007b] type 0 class 0x000500
[ 0.096979] pci 0000:00:01.5: [10de:007c] type 0 class 0x000500
[ 0.097030] pci 0000:00:01.6: [10de:007d] type 0 class 0x000500
[ 0.097087] pci 0000:00:02.0: [10de:007e] type 1 class 0x000604
[ 0.097136] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097159] pci 0000:00:04.0: [10de:007e] type 1 class 0x000604
[ 0.097207] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097227] pci 0000:00:05.0: [10de:007e] type 1 class 0x000604
[ 0.097275] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097296] pci 0000:00:06.0: [10de:007e] type 1 class 0x000604
[ 0.097344] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097365] pci 0000:00:07.0: [10de:007e] type 1 class 0x000604
[ 0.097413] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097449] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[ 0.097676] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[ 0.097753] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[ 0.097804] pci 0000:00:0a.1: reg 20: [io 0x5000-0x503f]
[ 0.097814] pci 0000:00:0a.1: reg 24: [io 0x5100-0x513f]
[ 0.097861] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.097883] pci 0000:00:0a.2: [10de:0272] type 0 class 0x000500
[ 0.097969] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[ 0.097986] pci 0000:00:0b.0: reg 10: [mem 0xd5006000-0xd5006fff]
[ 0.098053] pci 0000:00:0b.0: supports D1 D2
[ 0.098056] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098077] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[ 0.098094] pci 0000:00:0b.1: reg 10: [mem 0xd5007000-0xd50070ff]
[ 0.098168] pci 0000:00:0b.1: supports D1 D2
[ 0.098171] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.098203] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[ 0.098243] pci 0000:00:0d.0: reg 20: [io 0xf000-0xf00f]
[ 0.098297] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[ 0.098316] pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7]
[ 0.098325] pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.098334] pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977]
[ 0.098343] pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.098353] pci 0000:00:0e.0: reg 20: [io 0xd400-0xd40f]
[ 0.098362] pci 0000:00:0e.0: reg 24: [mem 0xd5004000-0xd5004fff]
[ 0.098428] pci 0000:00:0f.0: [10de:0267] type 0 class 0x000101
[ 0.098446] pci 0000:00:0f.0: reg 10: [io 0x09e0-0x09e7]
[ 0.098456] pci 0000:00:0f.0: reg 14: [io 0x0be0-0x0be3]
[ 0.098465] pci 0000:00:0f.0: reg 18: [io 0x0960-0x0967]
[ 0.098474] pci 0000:00:0f.0: reg 1c: [io 0x0b60-0x0b63]
[ 0.098483] pci 0000:00:0f.0: reg 20: [io 0xe800-0xe80f]
[ 0.098493] pci 0000:00:0f.0: reg 24: [mem 0xd5005000-0xd5005fff]
[ 0.098555] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[ 0.098633] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
[ 0.098653] pci 0000:00:10.1: reg 10: [mem 0xd5000000-0xd5003fff]
[ 0.098735] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.098820] pci 0000:01:00.0: [1002:68e1] type 0 class 0x000300
[ 0.098837] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit
pref]
[ 0.098850] pci 0000:01:00.0: reg 18: [mem 0xd1000000-0xd101ffff 64bit]
[ 0.098860] pci 0000:01:00.0: reg 20: [io 0xa000-0xa0ff]
[ 0.098876] pci 0000:01:00.0: reg 30: [mem 0xd0000000-0xd001ffff pref]
[ 0.098914] pci 0000:01:00.0: supports D1 D2
[ 0.098940] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
[ 0.098956] pci 0000:01:00.1: reg 10: [mem 0xd1020000-0xd1023fff 64bit]
[ 0.099027] pci 0000:01:00.1: supports D1 D2
[ 0.104024] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.104032] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.104038] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xd1ffffff]
[ 0.104047] pci 0000:00:02.0: bridge window [mem
0xc0000000-0xcfffffff 64bit pref]
[ 0.104115] pci 0000:02:00.0: [bdbd:a117] type 0 class 0x000400
[ 0.104141] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd20fffff]
[ 0.104169] pci 0000:02:00.0: reg 14: [mem 0xd2100000-0xd21fffff 64bit]
[ 0.104312] pci 0000:02:00.0: supports D1 D2
[ 0.104314] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.112025] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.112035] pci 0000:00:04.0: bridge window [mem
0xd2000000-0xd2ffffff]
[ 0.112082] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.112131] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.112180] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.112261] pci 0000:06:07.0: [1186:1300] type 0 class 0x000200
[ 0.112281] pci 0000:06:07.0: reg 10: [io 0xb000-0xb0ff]
[ 0.112293] pci 0000:06:07.0: reg 14: [mem 0xd4004000-0xd40040ff]
[ 0.112367] pci 0000:06:07.0: supports D1 D2
[ 0.112370] pci 0000:06:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.112400] pci 0000:06:0c.0: [11ab:4320] type 0 class 0x000200
[ 0.112422] pci 0000:06:0c.0: reg 10: [mem 0xd4000000-0xd4003fff]
[ 0.112434] pci 0000:06:0c.0: reg 14: [io 0xb400-0xb4ff]
[ 0.112480] pci 0000:06:0c.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.112521] pci 0000:06:0c.0: supports D1 D2
[ 0.112523] pci 0000:06:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.112561] pci 0000:00:10.0: PCI bridge to [bus 06-06] (subtractive
decode)
[ 0.112566] pci 0000:00:10.0: bridge window [io 0xb000-0xbfff]
[ 0.112571] pci 0000:00:10.0: bridge window [mem
0xd3000000-0xd4ffffff]
[ 0.112576] pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7]
(subtractive decode)
[ 0.112580] pci 0000:00:10.0: bridge window [io 0x0d00-0xffff]
(subtractive decode)
[ 0.112583] pci 0000:00:10.0: bridge window [mem
0x000a0000-0x000bffff] (subtractive decode)
[ 0.112587] pci 0000:00:10.0: bridge window [mem
0x000c0000-0x000dffff] (subtractive decode)
[ 0.112590] pci 0000:00:10.0: bridge window [mem
0xbff00000-0xfebfffff] (subtractive decode)
[ 0.112612] pci_bus 0000:00: on NUMA node 0
[ 0.112617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.112909] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.113094] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.113098] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
returned control mask: 0x1d
[ 0.113101] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.155253] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155318] ACPI: PCI Interrupt Link [LNK2] (IRQs *5 7 9 10 11 14 15)
[ 0.155378] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[ 0.155436] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155497] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
[ 0.155557] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 0.155614] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155673] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155734] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
[ 0.155792] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155851] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155910] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.155970] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.156049] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.156108] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.156169] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
[ 0.156229] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
[ 0.156289] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15)
*0, disabled.
[ 0.156350] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.156416] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 0.156523] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.156620] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.156716] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 0.156812] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.156908] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.157004] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.157100] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.157196] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.157292] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.157389] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0,
disabled.
[ 0.157487] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0,
disabled.
[ 0.157586] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0,
disabled.
[ 0.157684] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0,
disabled.
[ 0.157782] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.157879] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0,
disabled.
[ 0.157977] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.158074] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.158173] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0,
disabled.
[ 0.158271] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0,
disabled.
[ 0.158369] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.158466] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.158552] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.158552] vgaarb: loaded
[ 0.158552] vgaarb: bridge control possible 0000:01:00.0
[ 0.158552] PCI: Using ACPI for IRQ routing
[ 0.167981] PCI: pci_cache_line_size set to 64 bytes
[ 0.168110] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.168114] reserve RAM buffer: 00000000bfef0000 - 00000000bfffffff
[ 0.168246] HPET: 3 timers in total, 0 timers will be used for per-cpu
timer
[ 0.168255] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.168260] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.172049] Switching to clocksource hpet
[ 0.174383] pnp: PnP ACPI init
[ 0.174400] ACPI: bus type pnp registered
[ 0.174486] pnp 00:00: [bus 00-ff]
[ 0.174490] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.174493] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.174496] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.174499] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.174502] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.174505] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[ 0.174580] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[ 0.174609] pnp 00:01: [io 0x4000-0x407f]
[ 0.174612] pnp 00:01: [io 0x4080-0x40ff]
[ 0.174614] pnp 00:01: [io 0x4400-0x447f]
[ 0.174617] pnp 00:01: [io 0x4480-0x44ff]
[ 0.174619] pnp 00:01: [io 0x4800-0x487f]
[ 0.174622] pnp 00:01: [io 0x4880-0x48ff]
[ 0.174695] system 00:01: [io 0x4000-0x407f] has been reserved
[ 0.174699] system 00:01: [io 0x4080-0x40ff] has been reserved
[ 0.174702] system 00:01: [io 0x4400-0x447f] has been reserved
[ 0.174706] system 00:01: [io 0x4480-0x44ff] has been reserved
[ 0.174709] system 00:01: [io 0x4800-0x487f] has been reserved
[ 0.174713] system 00:01: [io 0x4880-0x48ff] has been reserved
[ 0.174717] system 00:01: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.174787] pnp 00:02: [io 0x0010-0x001f]
[ 0.174790] pnp 00:02: [io 0x0022-0x003f]
[ 0.174792] pnp 00:02: [io 0x0044-0x005f]
[ 0.174794] pnp 00:02: [io 0x0062-0x0063]
[ 0.174797] pnp 00:02: [io 0x0065-0x006f]
[ 0.174799] pnp 00:02: [io 0x0074-0x007f]
[ 0.174802] pnp 00:02: [io 0x0091-0x0093]
[ 0.174804] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.174807] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.174809] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.174812] pnp 00:02: [io 0x0800-0x087f]
[ 0.174814] pnp 00:02: [io 0x0290-0x0297]
[ 0.174817] pnp 00:02: [io 0x0880-0x088f]
[ 0.174899] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.174903] system 00:02: [io 0x0800-0x087f] has been reserved
[ 0.174907] system 00:02: [io 0x0290-0x0297] has been reserved
[ 0.174911] system 00:02: [io 0x0880-0x088f] has been reserved
[ 0.174915] system 00:02: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.174930] pnp 00:03: [dma 4]
[ 0.174932] pnp 00:03: [io 0x0000-0x000f]
[ 0.174935] pnp 00:03: [io 0x0080-0x0090]
[ 0.174938] pnp 00:03: [io 0x0094-0x009f]
[ 0.174940] pnp 00:03: [io 0x00c0-0x00df]
[ 0.174980] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.175040] pnp 00:04: [irq 0 disabled]
[ 0.175050] pnp 00:04: [irq 8]
[ 0.175053] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[ 0.175097] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.175132] pnp 00:05: [io 0x0070-0x0073]
[ 0.175174] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.175185] pnp 00:06: [io 0x0061]
[ 0.175228] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.175239] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.175246] pnp 00:07: [irq 13]
[ 0.175289] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.175619] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.175625] pnp 00:08: [irq 4]
[ 0.175708] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.176234] pnp 00:09: [io 0x0378-0x037f]
[ 0.176237] pnp 00:09: [io 0x0778-0x077b]
[ 0.176243] pnp 00:09: [irq 7]
[ 0.176246] pnp 00:09: [dma 3]
[ 0.176334] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.177132] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 0.177223] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.177228] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
(active)
[ 0.177337] pnp 00:0b: [mem 0x000f0000-0x000f3fff]
[ 0.177340] pnp 00:0b: [mem 0x000f4000-0x000f7fff]
[ 0.177343] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.177346] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.177348] pnp 00:0b: [mem 0xfeff0000-0xfeff00ff]
[ 0.177351] pnp 00:0b: [mem 0xbfef0000-0xbfefffff]
[ 0.177354] pnp 00:0b: [mem 0xffff0000-0xffffffff]
[ 0.177356] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.177359] pnp 00:0b: [mem 0x00100000-0xbfeeffff]
[ 0.177362] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.177365] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.177367] pnp 00:0b: [mem 0xfeff0000-0xfeff03ff]
[ 0.177471] system 00:0b: [mem 0x000f0000-0x000f3fff] could not be
reserved
[ 0.177475] system 00:0b: [mem 0x000f4000-0x000f7fff] could not be
reserved
[ 0.177479] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be
reserved
[ 0.177483] system 00:0b: [mem 0x000fc000-0x000fffff] could not be
reserved
[ 0.177487] system 00:0b: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.177490] system 00:0b: [mem 0xbfef0000-0xbfefffff] could not be
reserved
[ 0.177494] system 00:0b: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.177498] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.177502] system 00:0b: [mem 0x00100000-0xbfeeffff] could not be
reserved
[ 0.177506] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be
reserved
[ 0.177509] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.177513] system 00:0b: [mem 0xfeff0000-0xfeff03ff] could not be
reserved
[ 0.177517] system 00:0b: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.177530] pnp: PnP ACPI: found 12 devices
[ 0.177533] ACPI: ACPI bus type pnp unregistered
[ 0.177537] PnPBIOS: Disabled by ACPI PNP
[ 0.215344] PCI: max bus depth: 1 pci_try_num: 2
[ 0.215380] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.215384] pci 0000:00:02.0: bridge window [io 0xa000-0xafff]
[ 0.215389] pci 0000:00:02.0: bridge window [mem
0xd0000000-0xd1ffffff]
[ 0.215394] pci 0000:00:02.0: bridge window [mem
0xc0000000-0xcfffffff 64bit pref]
[ 0.215400] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 0.215405] pci 0000:00:04.0: bridge window [mem
0xd2000000-0xd2ffffff]
[ 0.215412] pci 0000:00:05.0: PCI bridge to [bus 03-03]
[ 0.215421] pci 0000:00:06.0: PCI bridge to [bus 04-04]
[ 0.215430] pci 0000:00:07.0: PCI bridge to [bus 05-05]
[ 0.215440] pci 0000:00:10.0: PCI bridge to [bus 06-06]
[ 0.215443] pci 0000:00:10.0: bridge window [io 0xb000-0xbfff]
[ 0.215449] pci 0000:00:10.0: bridge window [mem
0xd3000000-0xd4ffffff]
[ 0.215477] pci 0000:00:10.0: setting latency timer to 64
[ 0.215481] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.215484] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.215487] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.215491] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.215494] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.215497] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.215500] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.215503] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff
64bit pref]
[ 0.215507] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 0.215510] pci_bus 0000:06: resource 0 [io 0xb000-0xbfff]
[ 0.215513] pci_bus 0000:06: resource 1 [mem 0xd3000000-0xd4ffffff]
[ 0.215517] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.215520] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.215523] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.215526] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.215529] pci_bus 0000:06: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.215602] NET: Registered protocol family 2
[ 0.215687] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.215985] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.216475] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.216711] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.216714] TCP reno registered
[ 0.216718] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.216728] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.216833] NET: Registered protocol family 1
[ 0.217185] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.288303] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.288398] pci 0000:01:00.0: Boot video device
[ 0.288413] PCI: CLS 32 bytes, default 64
[ 0.288467] Unpacking initramfs...
[ 0.608491] Freeing initrd memory: 10188k freed
[ 0.614580] audit: initializing netlink socket (disabled)
[ 0.614605] type=2000 audit(1341728492.612:1): initialized
[ 0.630767] highmem bounce pool size: 64 pages
[ 0.630774] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.631495] VFS: Disk quotas dquot_6.5.2
[ 0.631541] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.631638] msgmni has been set to 1434
[ 0.631895] alg: No test for stdrng (krng)
[ 0.631931] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.631936] io scheduler noop registered
[ 0.631938] io scheduler deadline registered
[ 0.631963] io scheduler cfq registered (default)
[ 0.632146] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.632233] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[ 0.632315] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
[ 0.632399] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
[ 0.632480] pcieport 0000:00:07.0: irq 44 for MSI/MSI-X
[ 0.632572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.632600] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.632603] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.633084] nvidiafb_setup START
[ 0.633190] intel_idle: MWAIT substates: 0x20
[ 0.633192] intel_idle: does not run on family 6 model 15
[ 0.633236] GHES: HEST is not enabled!
[ 0.633254] isapnp: Scanning for PnP cards...
[ 0.986305] isapnp: No Plug & Play device found
[ 0.986387] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.006842] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.027725] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.028068] Linux agpgart interface v0.103
[ 1.028351] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 1.031691] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.031699] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.031852] mousedev: PS/2 mouse device common for all mice
[ 1.031919] rtc_cmos 00:05: RTC can wake from S4
[ 1.032070] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.032104] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.032116] cpuidle: using governor ladder
[ 1.032119] cpuidle: using governor menu
[ 1.032373] TCP cubic registered
[ 1.032425] NET: Registered protocol family 10
[ 1.033029] Mobile IPv6
[ 1.033033] NET: Registered protocol family 17
[ 1.033038] Registering the dns_resolver key type
[ 1.033058] Using IPI No-Shortcut mode
[ 1.033205] PM: Hibernation image not present or could not be loaded.
[ 1.033216] registered taskstats version 1
[ 1.033876] rtc_cmos 00:05: setting system clock to 2012-07-08 06:21:33
UTC (1341728493)
[ 1.033919] Initializing network drop monitor service
[ 1.034023] Freeing unused kernel memory: 408k freed
[ 1.034254] Write protecting the kernel text: 2912k
[ 1.034296] Write protecting the kernel read-only data: 1100k
[ 1.034298] NX-protecting the kernel data: 3232k
[ 1.091810] udevd[52]: starting version 175
[ 1.147454] usbcore: registered new interface driver usbfs
[ 1.147484] usbcore: registered new interface driver hub
[ 1.155304] SCSI subsystem initialized
[ 1.157254] usbcore: registered new device driver usb
[ 1.157955] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.157960] ehci_hcd: block sizes: qh 68 qtd 96 itd 160 sitd 96
[ 1.158057] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 1.158061] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 1.158089] drivers/usb/core/inode.c: creating file 'devices'
[ 1.158094] drivers/usb/core/inode.c: creating file '001'
[ 1.158099] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus
number 1
[ 1.158111] ehci_hcd 0000:00:0b.1: reset hcs_params 0x101888 dbg=1 cc=1
pcc=8 !ppc ports=8
[ 1.158122] ehci_hcd 0000:00:0b.1: reset portroute 0 0 0 0 0 0 0 0
[ 1.158126] ehci_hcd 0000:00:0b.1: reset hcc_params a086 caching frame
256/512/1024 park
[ 1.158142] ehci_hcd 0000:00:0b.1: park 0
[ 1.158150] ehci_hcd 0000:00:0b.1: debug port 1
[ 1.158156] ehci_hcd 0000:00:0b.1: reset command 0080b02 park=3
ithresh=8 period=1024 Reset HALT
[ 1.158166] ehci_hcd 0000:00:0b.1: cache line size of 32 is not
supported
[ 1.158169] ehci_hcd 0000:00:0b.1: supports USB remote wakeup
[ 1.158196] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xd5007000
[ 1.158202] ehci_hcd 0000:00:0b.1: init command 0010005 (park)=0
ithresh=1 period=512 RUN
[ 1.167291] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.167301] ACPI: Power Button [PWRB]
[ 1.167414] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.167419] ACPI: Power Button [PWRF]
[ 1.168098] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 1.168152] usb usb1: default language 0x0409
[ 1.168161] usb usb1: udev 1, busnum 1, minor = 0
[ 1.168164] usb usb1: New USB device found, idVendor=1d6b,
idProduct=0002
[ 1.168168] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.168171] usb usb1: Product: EHCI Host Controller
[ 1.168173] usb usb1: Manufacturer: Linux 3.3.0+ ehci_hcd
[ 1.168176] usb usb1: SerialNumber: 0000:00:0b.1
[ 1.170962] usb usb1: usb_probe_device
[ 1.170969] usb usb1: configuration #1 chosen from 1 choice
[ 1.170989] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 1.171027] hub 1-0:1.0: usb_probe_interface
[ 1.171031] hub 1-0:1.0: usb_probe_interface - got id
[ 1.171035] hub 1-0:1.0: USB hub found
[ 1.171042] hub 1-0:1.0: 8 ports detected
[ 1.171044] hub 1-0:1.0: standalone hub
[ 1.171047] hub 1-0:1.0: no power switching (usb 1.0)
[ 1.171049] hub 1-0:1.0: individual port over-current protection
[ 1.171053] hub 1-0:1.0: power on to power good time: 20ms
[ 1.171058] hub 1-0:1.0: local power source is good
[ 1.171061] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 1.171107] drivers/usb/core/inode.c: creating file '001'
[ 1.173776] libata version 3.00 loaded.
[ 1.174296] sata_nv 0000:00:0e.0: version 3.5
[ 1.174532] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 1.174549] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.174604] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.175782] ACPI: Fan [FAN] (on)
[ 1.176845] scsi0 : sata_nv
[ 1.178890] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.179184] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 1.180086] scsi1 : sata_nv
[ 1.180256] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400
irq 21
[ 1.180260] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408
irq 21
[ 1.180487] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 1.180506] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 1.180578] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 1.184032] scsi2 : sata_nv
[ 1.187692] scsi3 : sata_nv
[ 1.187911] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xe800
irq 20
[ 1.187916] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xe808
irq 20
[ 1.188568] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.188572] ohci_hcd: block sizes: ed 64 td 64
[ 1.188639] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 1.188643] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 1.188655] drivers/usb/core/inode.c: creating file '002'
[ 1.188661] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus
number 2
[ 1.188681] ohci_hcd 0000:00:0b.0: created debug files
[ 1.188684] ohci_hcd 0000:00:0b.0: supports USB remote wakeup
[ 1.188712] ohci_hcd 0000:00:0b.0: irq 23, io mem 0xd5006000
[ 1.194304] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.194308] ACPI: Thermal Zone [THRM] (40 C)
[ 1.204417] 8139too 0000:06:07.0: eth0: RealTek RTL8139 at 0xb000,
00:40:05:00:39:88, IRQ 17
[ 1.204777] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 1.204868] skge: 1.14 addr 0xd4000000 irq 18 chip Yukon-Lite rev 9
[ 1.205514] skge 0000:06:0c.0: eth1: addr 00:24:8c:02:b7:12
[ 1.246021] ohci_hcd 0000:00:0b.0: OHCI controller state
[ 1.246027] ohci_hcd 0000:00:0b.0: OHCI 1.0, NO legacy support
registers, rh state running
[ 1.246033] ohci_hcd 0000:00:0b.0: control 0x683 RWE RWC
HCFS=operational CBSR=3
[ 1.246037] ohci_hcd 0000:00:0b.0: cmdstatus 0x00000 SOC=0
[ 1.246041] ohci_hcd 0000:00:0b.0: intrstatus 0x00000004 SF
[ 1.246045] ohci_hcd 0000:00:0b.0: intrenable 0x8000004a MIE RHSC RD WDH
[ 1.246052] ohci_hcd 0000:00:0b.0: hcca frame #0003
[ 1.246057] ohci_hcd 0000:00:0b.0: roothub.a 01000208 POTPGT=1 NPS
NDP=8(8)
[ 1.246062] ohci_hcd 0000:00:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 1.246066] ohci_hcd 0000:00:0b.0: roothub.status 00008000 DRWE
[ 1.246071] ohci_hcd 0000:00:0b.0: roothub.portstatus [0] 0x00000100 PPS
[ 1.246075] ohci_hcd 0000:00:0b.0: roothub.portstatus [1] 0x00000100 PPS
[ 1.246080] ohci_hcd 0000:00:0b.0: roothub.portstatus [2] 0x00000100 PPS
[ 1.246085] ohci_hcd 0000:00:0b.0: roothub.portstatus [3] 0x00000100 PPS
[ 1.246089] ohci_hcd 0000:00:0b.0: roothub.portstatus [4] 0x00000100 PPS
[ 1.246094] ohci_hcd 0000:00:0b.0: roothub.portstatus [5] 0x00000100 PPS
[ 1.246099] ohci_hcd 0000:00:0b.0: roothub.portstatus [6] 0x00000100 PPS
[ 1.246103] ohci_hcd 0000:00:0b.0: roothub.portstatus [7] 0x00000100 PPS
[ 1.246125] usb usb2: default language 0x0409
[ 1.246134] usb usb2: udev 1, busnum 2, minor = 128
[ 1.246137] usb usb2: New USB device found, idVendor=1d6b,
idProduct=0001
[ 1.246140] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 1.246143] usb usb2: Product: OHCI Host Controller
[ 1.246145] usb usb2: Manufacturer: Linux 3.3.0+ ohci_hcd
[ 1.246148] usb usb2: SerialNumber: 0000:00:0b.0
[ 1.246839] usb usb2: usb_probe_device
[ 1.246844] usb usb2: configuration #1 chosen from 1 choice
[ 1.246855] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 1.246904] hub 2-0:1.0: usb_probe_interface
[ 1.246907] hub 2-0:1.0: usb_probe_interface - got id
[ 1.246911] hub 2-0:1.0: USB hub found
[ 1.246918] hub 2-0:1.0: 8 ports detected
[ 1.246921] hub 2-0:1.0: standalone hub
[ 1.246923] hub 2-0:1.0: no power switching (usb 1.0)
[ 1.246926] hub 2-0:1.0: global over-current protection
[ 1.246928] hub 2-0:1.0: power on to power good time: 2ms
[ 1.246935] hub 2-0:1.0: local power source is good
[ 1.246937] hub 2-0:1.0: no over-current condition exists
[ 1.246940] hub 2-0:1.0: trying to enable port power on non-switchable
hub
[ 1.247081] drivers/usb/core/inode.c: creating file '001'
[ 1.247145] ehci_hcd 0000:00:0b.1: HS companion for 0000:00:0b.0
[ 1.247215] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.247265] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.248067] scsi4 : pata_amd
[ 1.248216] scsi5 : pata_amd
[ 1.248870] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 1.248875] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 1.268071] ehci_hcd 0000:00:0b.1: GetStatus port:5 status 001403 0
ACK POWER sig=k CSC CONNECT
[ 1.268079] hub 1-0:1.0: port 5: status 0501 change 0001
[ 1.268092] ehci_hcd 0000:00:0b.1: GetStatus port:6 status 001403 0
ACK POWER sig=k CSC CONNECT
[ 1.268098] hub 1-0:1.0: port 6: status 0501 change 0001
[ 1.344126] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 1.368061] hub 1-0:1.0: state 7 ports 8 chg 0060 evt 0000
[ 1.368074] hub 1-0:1.0: port 5, status 0501, change 0000, 480 Mb/s
[ 1.368086] ehci_hcd 0000:00:0b.1: port 5 low speed --> companion
[ 1.420528] ata5.00: HPA detected: current 321670847, native 321672960
[ 1.420536] ata5.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133
[ 1.420541] ata5.00: 321670847 sectors, multi 1: LBA48
[ 1.420671] ata5.01: HPA detected: current 156299375, native 156301488
[ 1.420678] ata5.01: ATA-6: WDC WD800BB-00JHC0, 05.01C05, max UDMA/100
[ 1.420683] ata5.01: 156299375 sectors, multi 1: LBA
[ 1.420695] ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f,
BIOS=0x7f000 (0xc7c60000) ACPI=0x7f01f (15:20:0x1f)
[ 1.420704] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f,
BIOS=0x3f000 (0xc7c60000) ACPI=0x3f01f (15:20:0x1f)
[ 1.424067] ehci_hcd 0000:00:0b.1: GetStatus port:5 status 003402 0
ACK POWER OWNER sig=k CSC
[ 1.424092] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s
[ 1.424102] ehci_hcd 0000:00:0b.1: port 6 low speed --> companion
[ 1.436457] ata5.00: configured for UDMA/133
[ 1.444419] ata5.01: configured for UDMA/100
[ 1.480057] ehci_hcd 0000:00:0b.1: GetStatus port:6 status 003402 0
ACK POWER OWNER sig=k CSC
[ 1.480078] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0040
[ 1.480090] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0020
[ 1.480100] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00010301 CSC LSDA PPS CCS
[ 1.480108] hub 2-0:1.0: port 5, status 0301, change 0001, 1.5 Mb/s
[ 1.492051] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.504052] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.608044] hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms
status 0x301
[ 1.612094] Refined TSC clocksource calibration: 1800.058 MHz.
[ 1.612102] Switching to clocksource tsc
[ 1.728095] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00100303 PRSC LSDA PPS PES CCS
[ 1.784135] usb 2-5: new low-speed USB device number 2 using ohci_hcd
[ 1.804036] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.904036] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00100303 PRSC LSDA PPS PES CCS
[ 1.987050] usb 2-5: skipped 1 descriptor after interface
[ 1.990048] usb 2-5: default language 0x0409
[ 1.996050] usb 2-5: udev 2, busnum 2, minor = 129
[ 1.996054] usb 2-5: New USB device found, idVendor=046d, idProduct=c05a
[ 1.996059] usb 2-5: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.996063] usb 2-5: Product: USB Optical Mouse
[ 1.996067] usb 2-5: Manufacturer: Logitech
[ 1.996211] usb 2-5: usb_probe_device
[ 1.996217] usb 2-5: configuration #1 chosen from 1 choice
[ 1.999066] usb 2-5: adding 2-5:1.0 (config #1, interface 0)
[ 1.999152] drivers/usb/core/inode.c: creating file '002'
[ 1.999196] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00010301 CSC LSDA PPS CCS
[ 1.999206] hub 2-0:1.0: port 6, status 0301, change 0001, 1.5 Mb/s
[ 2.116018] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.116255] scsi 4:0:0:0: Direct-Access ATA HDT722516DLAT80
V43O PQ: 0 ANSI: 5
[ 2.116520] scsi 4:0:1:0: Direct-Access ATA WDC WD800BB-00JH
05.0 PQ: 0 ANSI: 5
[ 2.124033] hub 2-0:1.0: debounce: port 6: total 100ms stable 100ms
status 0x301
[ 2.244033] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00100303 PRSC LSDA PPS PES CCS
[ 2.291595] sd 4:0:0:0: [sda] 321670847 512-byte logical blocks: (164
GB/153 GiB)
[ 2.291622] sd 4:0:1:0: [sdb] 156299375 512-byte logical blocks: (80.0
GB/74.5 GiB)
[ 2.291707] sd 4:0:0:0: [sda] Write Protect is off
[ 2.291711] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.291756] sd 4:0:1:0: [sdb] Write Protect is off
[ 2.291761] sd 4:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.291770] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.291802] sd 4:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.300057] usb 2-6: new low-speed USB device number 3 using ohci_hcd
[ 2.326840] sdb: sdb1 sdb2
[ 2.350967] sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
[ 2.351214] sda: p7 size 37047500 extends beyond EOD, enabling native
capacity
[ 2.351748] ata5: soft resetting link
[ 2.420038] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00100303 PRSC LSDA PPS PES CCS
[ 2.505052] usb 2-6: skipped 1 descriptor after interface
[ 2.505058] usb 2-6: skipped 1 descriptor after interface
[ 2.508047] usb 2-6: default language 0x0409
[ 2.514051] usb 2-6: udev 3, busnum 2, minor = 130
[ 2.514056] usb 2-6: New USB device found, idVendor=046d, idProduct=c31d
[ 2.514061] usb 2-6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 2.514065] usb 2-6: Product: USB Keyboard
[ 2.514069] usb 2-6: Manufacturer: Logitech
[ 2.514216] usb 2-6: usb_probe_device
[ 2.514222] usb 2-6: configuration #1 chosen from 1 choice
[ 2.520050] usb 2-6: adding 2-6:1.0 (config #1, interface 0)
[ 2.523104] usb 2-6: adding 2-6:1.1 (config #1, interface 1)
[ 2.526105] drivers/usb/core/inode.c: creating file '003'
[ 2.526151] hub 2-0:1.0: state 7 ports 8 chg 0000 evt 0040
[ 2.529498] ata5.00: n_sectors mismatch 321670847 != 321672960
[ 2.529502] ata5.00: new n_sectors matches native, probably late HPA
unlock, n_sectors updated
[ 2.529514] ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f,
BIOS=0x7f000 (0xc7c60000) ACPI=0x7f01f (15:20:0x1f)
[ 2.529520] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f,
BIOS=0x3f000 (0xc7c60000) ACPI=0x3f01f (15:20:0x1f)
[ 2.533120] usbhid 2-5:1.0: usb_probe_interface
[ 2.533125] usbhid 2-5:1.0: usb_probe_interface - got id
[ 2.539385] input: Logitech USB Optical Mouse as
/devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input2
[ 2.539505] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID
v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:0b.0-5/input0
[ 2.539517] usbhid 2-6:1.0: usb_probe_interface
[ 2.539521] usbhid 2-6:1.0: usb_probe_interface - got id
[ 2.544436] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.0/input/input3
[ 2.544477] ata5.00: configured for UDMA/133
[ 2.544518] generic-usb 0003:046D:C31D.0002: input,hidraw1: USB HID
v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:0b.0-6/input0
[ 2.544532] usbhid 2-6:1.1: usb_probe_interface
[ 2.544535] usbhid 2-6:1.1: usb_probe_interface - got id
[ 2.552403] ata5.01: configured for UDMA/100
[ 2.552411] ata5: EH complete
[ 2.552535] sd 4:0:0:0: [sda] 321672960 512-byte logical blocks: (164
GB/153 GiB)
[ 2.552570] sd 4:0:1:0: [sdb] Attached SCSI disk
[ 2.553114] sda: detected capacity change from 164695473664 to
164696555520
[ 2.558181] input: Logitech USB Keyboard as
/devices/pci0000:00/0000:00:0b.0/usb2/2-6/2-6:1.1/input/input4
[ 2.558276] generic-usb 0003:046D:C31D.0003: input,hidraw2: USB HID
v1.10 Device [Logitech USB Keyboard] on usb-0000:00:0b.0-6/input1
[ 2.558310] usbcore: registered new interface driver usbhid
[ 2.558312] usbhid: USB HID core driver
[ 2.682848] sda: sda1 sda2 sda4 < sda5 sda6 sda7 >
[ 2.688433] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.688504] sda: detected capacity change from 0 to 164696555520
[ 3.318799] [drm] Initialized drm 1.1.0 20060810
[ 3.325599] [drm:i915_init] *ERROR* drm/i915 can't work without
intel_agp module!
[ 3.341091] device-mapper: uevent: version 1.0.3
[ 3.341169] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19)
initialised: dm-devel@xxxxxxxxxx
[ 3.348252] PM: Starting manual resume from disk
[ 3.348256] PM: Hibernation image partition 8:5 present
[ 3.348258] PM: Looking for hibernation image.
[ 3.348448] PM: Image not found (code -22)
[ 3.348452] PM: Hibernation image not present or could not be loaded.
[ 3.352794] PM: Marking nosave pages: 000000000009f000 -
0000000000100000
[ 3.352801] PM: Basic memory bitmaps created
[ 3.382723] PM: Basic memory bitmaps freed
[ 3.465823] kjournald starting. Commit interval 5 seconds
[ 3.465867] EXT3-fs (sda5): mounted filesystem with ordered data mode
[ 3.808772] hub 1-0:1.0: hub_suspend
[ 3.808786] usb usb1: bus auto-suspend, wakeup 1
[ 3.808791] ehci_hcd 0000:00:0b.1: suspend root hub
[ 6.258259] udevd[395]: starting version 175
[ 7.252867] [drm] radeon kernel modesetting enabled.
[ 7.253233] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 7.253467] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E1
0x174B:0x6000).
[ 7.253499] [drm] register mmio base: 0xD1000000
[ 7.253501] [drm] register mmio size: 131072
[ 7.253880] ATOM BIOS: PARK
[ 7.253961] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 7.253965] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 -
0x000000005FFFFFFF
[ 7.255014] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 7.255019] [drm] RAM width 64bits DDR
[ 7.255112] [TTM] Zone kernel: Available graphics memory: 367472 kiB.
[ 7.255115] [TTM] Zone highmem: Available graphics memory: 1553748 kiB.
[ 7.255118] [TTM] Initializing pool allocator.
[ 7.255124] [TTM] Initializing DMA pool allocator.
[ 7.255157] [drm] radeon: 1024M of VRAM memory ready
[ 7.255159] [drm] radeon: 512M of GTT memory ready.
[ 7.255180] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.255182] [drm] Driver supports precise vblank timestamp query.
[ 7.255233] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 7.255247] radeon 0000:01:00.0: radeon: using MSI.
[ 7.255283] [drm] radeon: irq initialized.
[ 7.255289] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 7.256101] [drm] radeon: ib pool ready.
[ 7.256225] [drm] Loading CEDAR Microcode
[ 7.394623] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.394696] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.471634] ACPI Warning: 0x00005000-0x0000503f SystemIO conflicts with
Region \_SB_.PCI0.SM00 1 (20120111/utaddress-251)
[ 7.471643] ACPI: If an ACPI driver is available for this device, you
should use it instead of the native driver
[ 7.471698] i2c i2c-0: nForce2 SMBus adapter at 0x5100
[ 7.498454] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 7.498565] NV_TCO: Watchdog reboot not detected.
[ 7.498944] NV_TCO: initialized (0x4440). heartbeat=30 sec (nowayout=0)
[ 7.583354] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.316783] [drm] PCIE GART of 512M enabled (table at
0x0000000000040000).
[ 8.316899] radeon 0000:01:00.0: WB enabled
[ 8.316903] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and
cpu addr 0xffba7c00
[ 8.333103] [drm] ring test on 0 succeeded in 1 usecs
[ 8.333280] [drm] ib test on ring 0 succeeded in 0 usecs
[ 8.333690] [drm] Radeon Display Connectors
[ 8.333692] [drm] Connector 0:
[ 8.333694] [drm] HDMI-A
[ 8.333696] [drm] HPD2
[ 8.333698] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448
0x644c 0x644c
[ 8.333701] [drm] Encoders:
[ 8.333703] [drm] DFP1: INTERNAL_UNIPHY1
[ 8.333705] [drm] Connector 1:
[ 8.333706] [drm] DVI-I
[ 8.333708] [drm] HPD4
[ 8.333710] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468
0x646c 0x646c
[ 8.333712] [drm] Encoders:
[ 8.333714] [drm] DFP2: INTERNAL_UNIPHY
[ 8.333716] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.333718] [drm] Connector 2:
[ 8.333720] [drm] VGA
[ 8.333722] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438
0x643c 0x643c
[ 8.333725] [drm] Encoders:
[ 8.333726] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 8.333766] [drm] Internal thermal controller with fan control
[ 8.333819] [drm] radeon: power management initialized
[ 8.486888] [drm] fb mappable at 0xC0142000
[ 8.486891] [drm] vram apper at 0xC0000000
[ 8.486893] [drm] size 8294400
[ 8.486895] [drm] fb depth is 24
[ 8.486897] [drm] pitch is 7680
[ 8.487001] fbcon: radeondrmfb (fb0) is primary device
[ 8.696036] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 8.696041] hda_intel: Disabling MSI
[ 8.696069] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[ 8.745425] Console: switching to colour frame buffer device 160x64
[ 8.754312] fb0: radeondrmfb frame buffer device
[ 8.754314] drm: registered panic notifier
[ 8.754383] [drm] Initialized radeon 2.13.0 20080528 for 0000:01:00.0
on minor 0
[ 9.410229] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:10.1/input/input6
[ 9.560458] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 9.560532] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 9.820569] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 9.820688] input: HD-Audio Generic HDMI/DP,pcm=3 as
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input7
[ 11.365474] Adding 1956180k swap on /dev/sda6. Priority:-1 extents:1
across:1956180k
[ 12.045301] EXT3-fs (sda5): using internal journal
[ 18.987361] kjournald starting. Commit interval 5 seconds
[ 18.987627] EXT3-fs (sda2): using internal journal
[ 18.987632] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 19.062655] FAT-fs (sdb2): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 19.131619] kjournald starting. Commit interval 5 seconds
[ 19.131821] EXT3-fs (sda1): using internal journal
[ 19.131827] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 19.311846] EXT4-fs (sda7): mounted filesystem with ordered data mode.
Opts: (null)
[ 21.292570] fuse init (API version 7.18)
[ 23.372312] ttyS1: LSR safety check engaged!
[ 23.373174] ttyS1: LSR safety check engaged!
[ 24.813744] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input8
[ 34.024643] lp0: using parport0 (interrupt-driven).
[ 34.407696] ppdev: user-space parallel port driver
[ 37.138306] 8139too 0000:06:07.0: eth0: link down
[ 37.138588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 37.152262] skge 0000:06:0c.0: eth1: enabling interface
[ 37.155659] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 38.839136] skge 0000:06:0c.0: eth1: Link is up at 100 Mbps, full
duplex, flow control both
[ 38.839372] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 45.535376] Ebtables v2.0 registered
[ 45.988565] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 46.028436] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 46.893649] usb usb1: usb auto-resume
[ 46.893655] ehci_hcd 0000:00:0b.1: resume root hub
[ 46.944153] hub 1-0:1.0: hub_resume
[ 46.944199] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[ 65.804040] hub 1-0:1.0: hub_suspend
[ 65.804053] usb usb1: bus auto-suspend, wakeup 1
[ 65.804058] ehci_hcd 0000:00:0b.1: suspend root hub
[ 81.642706] postgres (4166): /proc/4166/oom_adj is deprecated, please
use /proc/4166/oom_score_adj instead.
> Also, what does the "lspci -vv" output show for the controller if you
> run it with superuser permissions?
[Sat Jul 07 12:50:10 -0700 -- alvarezp@octavio:/sys/kernel/debug/usb]
$ sudo lspci -vv -s 0000:00:0b.1
0b.1 is the EHCI controller. We want to see the OHCI controller, 0b.0.
(Already replied in another message but I repeat it here. Taken without
my pen drive.)
[Sat Jul 07 23:36:02 -0700 -- alvarezp@octavio:~]
$ sudo lspci -vv -s 0000:00:0b.0
00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a2)
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. A8N-VM CSM Mainboard
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d5006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
Can you also post a dmesg log showing a full suspend/immediate-resume
cycle with CONFIG_USB_DEBUG enabled?
This is the continuation of the previous dmesg, starting on second 178,
when I pressed the power button.
(done without my pen drive)
[ 178.165344] skge 0000:06:0c.0: eth1: disabling interface
[ 180.463060] PM: Syncing filesystems ... done.
[ 180.679249] PM: Preparing system for mem sleep
[ 180.700935] Freezing user space processes ... (elapsed 0.01 seconds)
done.
[ 180.716091] Freezing remaining freezable tasks ... (elapsed 0.01
seconds) done.
[ 180.732082] PM: Entering mem sleep
[ 180.732104] Suspending console(s) (use no_console_suspend to debug)
[ 180.732526] sd 4:0:1:0: [sdb] Synchronizing SCSI cache
[ 180.732529] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[ 180.732613] usb 2-5: usb suspend, wakeup 0
[ 180.732715] sd 4:0:1:0: [sdb] Stopping disk
[ 180.732923] usb usb1: usb auto-resume
[ 180.732928] ehci_hcd 0000:00:0b.1: resume root hub
[ 180.767535] sd 4:0:0:0: [sda] Stopping disk
[ 180.767863] parport_pc 00:09: disabled
[ 180.767991] serial 00:08: disabled
[ 180.767998] serial 00:08: wake-up capability disabled by ACPI
[ 180.770361] usb 2-6: usb suspend, wakeup 1
[ 180.784036] hub 2-0:1.0: hub_suspend
[ 180.784042] usb usb2: bus suspend, wakeup 0
[ 180.784045] ohci_hcd 0000:00:0b.0: suspend root hub
[ 180.804023] hub 1-0:1.0: hub_resume
[ 180.804051] hub 1-0:1.0: hub_suspend
[ 180.804058] usb usb1: bus suspend, wakeup 0
[ 180.804062] ehci_hcd 0000:00:0b.1: suspend root hub
[ 180.872152] ACPI handle has no context!
[ 181.140060] PM: suspend of devices complete after 407.683 msecs
[ 181.140302] pci 0000:00:10.0: wake-up capability enabled by ACPI
[ 181.156141] ehci_hcd 0000:00:0b.1: wakeup: 1
[ 181.156202] ehci_hcd 0000:00:0b.1: wake-up capability enabled by ACPI
[ 181.172036] ehci_hcd 0000:00:0b.1: --> PCI D3hot
[ 181.172066] ohci_hcd 0000:00:0b.0: wakeup: 1
[ 181.172079] ohci_hcd 0000:00:0b.0: wake-up capability enabled by ACPI
[ 181.188035] ohci_hcd 0000:00:0b.0: --> PCI D3hot
[ 181.188405] PM: late suspend of devices complete after 48.340 msecs
[ 181.188732] ACPI: Preparing to enter system sleep state S3
[ 181.189094] PM: Saving platform NVS memory
[ 181.189125] Disabling non-boot CPUs ...
[ 181.292034] CPU 1 is now offline
[ 181.292601] Extended CMOS year: 2000
[ 181.292601] ACPI: Low-level resume complete
[ 181.292601] PM: Restoring platform NVS memory
[ 181.292601] Extended CMOS year: 2000
[ 181.292601] Enabling non-boot CPUs ...
[ 181.292601] Booting Node 0 Processor 1 APIC 0x1
[ 181.292601] smpboot cpu 1: start_ip = 9b000
[ 181.190475] Initializing CPU#1
[ 181.190475] Calibrating delay loop (skipped) already calibrated this CPU
[ 181.325670] NMI watchdog enabled, takes one hw-pmu counter.
[ 181.328041] CPU1 is up
[ 181.329481] ACPI: Waking up from system sleep state S3
[ 181.330295] ohci_hcd 0000:00:0b.0: wake-up capability disabled by ACPI
[ 181.330357] ehci_hcd 0000:00:0b.1: wake-up capability disabled by ACPI
[ 181.356929] PM: early resume of devices complete after 27.285 msecs
[ 181.357054] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 181.357060] ohci_hcd 0000:00:0b.0: powerup ports
[ 181.357101] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 181.357134] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 181.357147] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 181.357153] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 181.357162] pci 0000:00:10.0: setting latency timer to 64
[ 181.357171] snd_hda_intel 0000:00:10.1: setting latency timer to 64
[ 181.357270] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 181.357331] pci 0000:00:10.0: wake-up capability disabled by ACPI
[ 181.359111] serial 00:08: activated
[ 181.359770] parport_pc 00:09: activated
[ 181.366867] [drm] PCIE GART of 512M enabled (table at
0x0000000000040000).
[ 181.366976] radeon 0000:01:00.0: WB enabled
[ 181.366979] [drm] fence driver on ring 0 use gpu addr 0x40000c00 and
cpu addr 0xffba7c00
[ 181.383028] [drm] ring test on 0 succeeded in 1 usecs
[ 181.383063] [drm] ib test on ring 0 succeeded in 0 usecs
[ 181.394398] usb usb2: usb resume
[ 181.394403] ohci_hcd 0000:00:0b.0: wakeup root hub
[ 181.394426] usb usb1: usb resume
[ 181.394430] ehci_hcd 0000:00:0b.1: resume root hub
[ 181.428035] ehci_hcd 0000:00:0b.1: port 6 low speed --> companion
[ 181.472053] hub 2-0:1.0: hub_resume
[ 181.472076] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00030301 PESC CSC LSDA PPS CCS
[ 181.472082] hub 2-0:1.0: port 5: status 0301 change 0003
[ 181.472100] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00030301 PESC CSC LSDA PPS CCS
[ 181.472105] hub 2-0:1.0: port 6: status 0301 change 0003
[ 181.524028] ehci_hcd 0000:00:0b.1: GetStatus port:6 status 003402 0
ACK POWER OWNER sig=k CSC
[ 181.540030] hub 1-0:1.0: hub_resume
[ 181.540040] ehci_hcd 0000:00:0b.1: GetStatus port:1 status 001020 0
ACK POWER sig=se0 OCC
[ 181.540051] ehci_hcd 0000:00:0b.1: GetStatus port:2 status 001020 0
ACK POWER sig=se0 OCC
[ 181.540061] ehci_hcd 0000:00:0b.1: GetStatus port:3 status 001020 0
ACK POWER sig=se0 OCC
[ 181.540071] ehci_hcd 0000:00:0b.1: GetStatus port:4 status 001020 0
ACK POWER sig=se0 OCC
[ 181.540086] ehci_hcd 0000:00:0b.1: GetStatus port:7 status 001020 0
ACK POWER sig=se0 OCC
[ 181.540095] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001020 0
ACK POWER sig=se0 OCC
[ 181.556340] ata5.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES)
filtered out
[ 181.556344] ata5.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES)
filtered out
[ 181.556349] ata5.01: ACPI cmd f5/00:00:00:00:00:b0 (SECURITY FREEZE
LOCK) filtered out
[ 181.576061] usb 2-6: finish reset-resume
[ 181.576071] usb 2-5: finish reset-resume
[ 181.580353] ata5.00: ACPI cmd ef/03:46:00:00:00:a0 (SET FEATURES)
filtered out
[ 181.580357] ata5.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES)
filtered out
[ 181.580361] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE
LOCK) filtered out
[ 181.588351] ata5: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f,
BIOS=0x7f000 (0xc7c60000) ACPI=0x7f01f (15:20:0x1f)
[ 181.588356] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f,
BIOS=0x3f000 (0xc7c60000) ACPI=0x3f01f (15:20:0x1f)
[ 181.604457] ata5.00: configured for UDMA/133
[ 181.612406] ata5.01: configured for UDMA/100
[ 181.612453] sd 4:0:0:0: [sda] Starting disk
[ 181.612502] sd 4:0:1:0: [sdb] Starting disk
[ 181.844037] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00100303 PRSC LSDA PPS PES CCS
[ 181.900039] usb 2-6: reset low-speed USB device number 3 using ohci_hcd
[ 182.108063] ata2: SATA link down (SStatus 0 SControl 300)
[ 182.108070] ata4: SATA link down (SStatus 0 SControl 300)
[ 182.108151] ata1: SATA link down (SStatus 0 SControl 300)
[ 182.108158] ata3: SATA link down (SStatus 0 SControl 300)
[ 182.168058] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [5] =
0x00100303 PRSC LSDA PPS PES CCS
[ 182.512310] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00100303 PRSC LSDA PPS PES CCS
[ 182.568124] usb 2-5: reset low-speed USB device number 2 using ohci_hcd
[ 182.836196] ohci_hcd 0000:00:0b.0: GetStatus roothub.portstatus [4] =
0x00100303 PRSC LSDA PPS PES CCS
[ 182.926228] PM: resume of devices complete after 1569.257 msecs
[ 182.926436] PM: Finishing wakeup.
[ 182.926439] Restarting tasks ... done.
[ 182.928407] hub 1-0:1.0: state 7 ports 8 chg 0000 evt ff9e
[ 182.928421] ehci_hcd 0000:00:0b.1: GetStatus port:1 status 001020 0
ACK POWER sig=se0 OCC
[ 182.928426] hub 1-0:1.0: over-current change on port 1
[ 183.032022] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 183.136050] ehci_hcd 0000:00:0b.1: GetStatus port:2 status 001020 0
ACK POWER sig=se0 OCC
[ 183.136058] hub 1-0:1.0: over-current change on port 2
[ 183.240055] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 183.344043] ehci_hcd 0000:00:0b.1: GetStatus port:3 status 001020 0
ACK POWER sig=se0 OCC
[ 183.344049] hub 1-0:1.0: over-current change on port 3
[ 183.448024] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 183.552052] ehci_hcd 0000:00:0b.1: GetStatus port:4 status 001020 0
ACK POWER sig=se0 OCC
[ 183.552058] hub 1-0:1.0: over-current change on port 4
[ 183.588681] 8139too 0000:06:07.0: eth0: link down
[ 183.588988] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 183.591199] skge 0000:06:0c.0: eth1: enabling interface
[ 183.594860] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 183.656017] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 183.760038] ehci_hcd 0000:00:0b.1: GetStatus port:7 status 001020 0
ACK POWER sig=se0 OCC
[ 183.760045] hub 1-0:1.0: over-current change on port 7
[ 183.864030] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 183.968057] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001020 0
ACK POWER sig=se0 OCC
[ 183.968066] hub 1-0:1.0: over-current change on port 8
[ 184.072043] hub 1-0:1.0: trying to enable port power on non-switchable
hub
[ 184.176040] hub 2-0:1.0: state 7 ports 8 chg 0060 evt 0001
[ 184.176053] hub 2-0:1.0: port 5, status 0303, change 0000, 1.5 Mb/s
[ 184.176061] hub 2-0:1.0: port 6, status 0303, change 0000, 1.5 Mb/s
[ 184.176068] hub 2-0:1.0: over-current change
[ 184.680022] hub 2-0:1.0: trying to enable port power on non-switchable
hub
[ 185.296539] skge 0000:06:0c.0: eth1: Link is up at 100 Mbps, full
duplex, flow control both
[ 185.296789] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 186.808038] hub 1-0:1.0: hub_suspend
[ 186.808050] usb usb1: bus auto-suspend, wakeup 1
[ 186.808055] ehci_hcd 0000:00:0b.1: suspend root hub
Thanks.
--
Octavio.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
