Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 07/17] OMAP3 SDRC: initialize SDRC_POWER at boot
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 14/17] OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 10/17] OMAP3 clock: use pr_debug() rather than pr_info() in some clock change code
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 02/17] OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memory
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 08/17] OMAP3 SRAM: renumber registers to make space for argument passing
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 01/17] ARM: MMU: add a Non-cacheable Normal executable memory type
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 06/17] OMAP3 SDRC: Add 166MHz, 83MHz SDRC settings for the BeagleBoard
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 05/17] OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 03/17] OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpll
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 04/17] OMAP3 clock: add interconnect barriers to CORE DPLL M2 change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] PM: OMAP3: Refreshed DVFS VDD1 control against latest clock fw
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: Powertop on Beagle
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] OMAP gptimer based event monitor driver for oprofile
  • From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
• Re: [PATCH 1/1] Patch for I2C transmit overflow error
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• RE: Powertop on Beagle
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH 0/3] Add support for OMAP35x processors
  • From: Sanjeev Premi <premi@xxxxxx>
• RE: Powertop on Beagle
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Powertop on Beagle
  • From: Philip Balister <philip@xxxxxxxxxxxx>
• RE: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/1] Patch for I2C transmit overflow error
  • From: "Jason Marini" <jason.marini@xxxxxxxxx>
• Re: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] SDTI fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3 EVM MMC1 support for TPS based PR785 power modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Questions about masking interrupts when disabling interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2: gptimer min_delta_ns corrected
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Enable writing to XCCR and RCCR McBSP registers for OMAP 2430/34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH 0/2] SDTI fixes
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 2/2] OMAP3: PM: Emu_pwrdm is switched off by hardware even when sdti is in use
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• [PATCH 1/2] SDTI: Fix sdti to use right clocks from clockfw
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• RE: [PATCH v2] usb: musb: fix bug in musbhsdma programming
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• RE: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH v2] usb: musb: fix bug in musbhsdma programming
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• RE: [PATCH 1/1] OMAP3 EVM MMC1 support for TPS based PR785 power modules
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH 1/1] Patch for I2C transmit overflow error
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• RE: [PATCH 0/1] OMAP gptimer based event monitor driver for oprofile
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: using git with linux-omap
  • From: green <greenfreedom10@xxxxxxxxx>
• [PATCH 1/1] OMAP gptimer based event monitor driver for oprofile
  • From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
• [PATCH 0/1] OMAP gptimer based event monitor driver for oprofile
  • From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP3: Enable writing to XCCR and RCCR McBSP registers for OMAP 2430/34xx
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• Re: Extended driver private controls?
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RE: Extended driver private controls?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Enable writing to XCCR and RCCR McBSP registers for OMAP 2430/34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] NAND support for OMAP3 EVM
  • From: Josh Karabin <gkarabin@xxxxxxxxxxxxx>
• Re: Extended driver private controls?
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH] OMAP2/3 McBSP: add temporary clockdomain fix for McBSP virtual clocks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] NAND support for OMAP3 EVM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] Adding support for NAND partitions in OMAP3 EVM.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] NAND support for OMAP3 EVM
  • From: Josh Karabin <gkarabin@xxxxxxxxxxxxx>
• [PATCH] OMAP2/3 McBSP: add temporary clockdomain fix for McBSP virtual clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3 EVM MMC1 support for TPS based PR785 power modules
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] Adding support for NAND partitions in OMAP3 EVM.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH OMAPZOOM] OMAP: DMA: Fix CCR programming for request line > 63
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resend][PATCH - Omapzoom][NAND] Add prefetch and DMA support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH OMAPZOOM] OMAP: DMA: Fix CCR programming for request line > 63
  • From: twebb <taliaferro62@xxxxxxxxx>
• Waiting while MMC busy
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH OMAPZOOM] OMAP: DMA: Fix CCR programming for request line > 63
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH OMAPZOOM] OMAP: DMA: Fix CCR programming for request line > 63
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: [PATCH] i2c: i2c-omap: Fix standard and fast mode prescalers
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-omap: Fix BUFSTAT_REG reading
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] OMAP: Fix McBSP spin_lock deadlock.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH OMAPZOOM] OMAP: DMA: Fix CCR programming for request line > 63
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [PATCH] usb: musb: fix bug in musbhsdma programming
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [PATCH] Don't mask rtc-twl4030 alarm interrupts on shutdown
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MMC: recover from transfer failures
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/1] Default MUX configuration added - GPIO140-143, GPIO0 and GPIO9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MMC: recover from transfer failures
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] usb: musb: adding support for registering nop xceiv
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH] usb: musb: adding nop usb transceiver
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
• Re: About to tag v2.6.28-omap1 on Friday
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MMC: recover from transfer failures
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• updated git pull request for omap compile fixes, mailbox and hsmmc
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Fwd: Questions about masking interrupts when disabling interrupts
  • From: "Kim Kyuwon" <chammoru@xxxxxxxxx>
• Re: Questions about masking interrupts when disabling interrupts
  • From: "Kim Kyuwon" <chammoru@xxxxxxxxx>
• [OMAPZOOM][PATCH v2 2/2] OMAP3: CAM: PM: Set VPP constraints
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH v2 1/2] OMAP3ISP: Preview fix
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH v2 0/2] Some more camera syncup patches
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH] OMAP3: GPIO fixes for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [OMAPZOOM][PATCH 0/2] Some more camera syncup patches
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: [OMAPZOOM][PATCH 0/2] Some more camera syncup patches
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [OMAPZOOM][PATCH] Set the dcsub value for the OV3640 sensor.
  • From: Dominic Curran <dcurran@xxxxxx>
• RE: Andriod on LDP Omap
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• About to tag v2.6.28-omap1 on Friday
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Spurious interrupt warning
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: Spurious interrupt warning
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• RE: differences between LDP and ZOOM2
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• differences between LDP and ZOOM2
  • From: "Simon Braunschmidt" <Simon.Braunschmidt@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: Spurious interrupt warning
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 0/2] legacy gpio phaseout (V) ...
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 00/23] OMAP clock: bug fixes, cleanup, optimization
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MMC: recover from transfer failures (was: Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] Backlight driver for omap3evm
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] Backlight driver for omap3evm
  • From: Richard Purdie <rpurdie@xxxxxxxxx>
• [PATCH] Backlight driver for omap3evm
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: omap mmc: remove duplicated #include's
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Revert "OMAP: HSMMC: Implement scatter-gather emulation"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: Questions about masking interrupts when disabling interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ADC timeout on Overo
  • From: frank agius <ftagius@xxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• git pull request for omap compile fixes, mailbox and hsmmc for current merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP: Fix gpio by switching to generic gpio calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP: Fix missing includes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] usb: musb: fix null pointer check in musb_platform_init()
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 2/3] usb: musb: fix compilation error in musb_platform_init
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• [PATCH 0/2] Fix omap builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/3] usb: musb: fix bug in musb_free() w.r.t free_irq()
  • From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
• Re: [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [REVIEW PATCH 1/2] OMAP3 ISP-Camera: Added BT656 support
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• [PATCH] OMAP: MMC: recover from transfer failures (was: Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx)
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• RE: [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [REVIEW PATCH 1/2] OMAP3 ISP-Camera: Added BT656 support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [REVIEW PATCH 1/2] OMAP3 ISP-Camera: Added BT656 support
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: Spurious interrupt warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] Don't mask rtc-twl4030 alarm interrupts on shutdown
  • From: "matti.halme@xxxxxxxxx" <matti.halme@xxxxxxxxx>
• [REVIEW PATCH 2/2] Added OMAP3EVM Multi-Media Daughter Card Support
  • From: hvaibhav@xxxxxx
• [REVIEW PATCH 1/2] OMAP3 ISP-Camera: Added BT656 support
  • From: hvaibhav@xxxxxx
• [RFC] OMAP3EVM Multi-Media Daughter Card Support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [OMAPZOOM][PATCH 2/2] OMAP3: CAM: PM: Set VPP constraints
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 1/2] OMAP3ISP: Preview fix
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 0/2] Some more camera syncup patches
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH] OMAP3: PM: SRAM: Fixes build without TI PM enabled
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: Query on backlight driver
  • From: Richard Purdie <rpurdie@xxxxxxxxx>
• [PATCH] NAND support for OMAP3 EVM
  • From: Josh Karabin <gkarabin@xxxxxxxxxxxxx>
• [OMAPZOOM][PATCH 7/7] OMAP3ISP: Changes for kernel pre-emption
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 6/7] OMAP3: CAM: Lens position fix
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 5/7] MT9P012: QVGA 30fps issue fix
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 4/7] MT9P012: Changes to support QVGA at 120 fps
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 3/7] OMAP3ISP: Preview: Dynamic update of Color effects
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 2/7] OMAP3ISP: Check asignment on vbq before unmapping
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 1/7] OMAP3ISP: Preview: Abstraction layer updates
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [OMAPZOOM][PATCH 0/7] Camera syncup with TI internal tree fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Query on backlight driver
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH 1/1] Patch for I2C transmit overflow error
  • From: "Jason Marini" <jason.marini@xxxxxxxxx>
• RE: Spurious interrupt warning
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Fwd: [PATCH v2 20/23] OMAP2/3 clock: omap2_clk_enable(): fix usecount decrement bug
  • From: "Anuj Aggarwal" <anuj.aggarwal@xxxxxxxxx>
• Re: Spurious interrupt warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Spurious interrupt warning
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: Spurious interrupt warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• RE: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• RE: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Spurious interrupt warning
  • From: "Shah, Hardik" <hardik.shah@xxxxxx>
• RE: git clone through http not working well
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• RE: [PATCH 1/1] OMAP3 EVM MMC1 support for TPS based PR785 power modules
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Questions about masking interrupts when disabling interrupts
  • From: "김규원" <chammoru@xxxxxxxxx>
• Re: [PATCH v2 08/23] OMAP clock: remove VIRTUAL_CLOCK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 08/23] OMAP clock: remove VIRTUAL_CLOCK
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: git clone through http not working well
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: git clone through http not working well
  • From: "Hunter, Jon" <jon-hunter@xxxxxx>
• git clone through http not working well
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 00/22] Series short description
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 17/23] OMAP2/3 clock: every clock must have a clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 23/23] OMAP3 SmartReflex: get rid of custom clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 22/23] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be disabled
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 21/23] OMAP2/3 clock: omap2_clk_enable(): fix logic
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 18/23] OMAP2/3 clock: omap2_clk_enable(): refactor usecount check
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 16/23] OMAP clock: add OMAP chip family-specific clk_register() option
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 19/23] OMAP2/3 clock: omap2_clk_enable(): fix bugs in clockdomain handling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 20/23] OMAP2/3 clock: omap2_clk_enable(): fix usecount decrement bug
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 15/23] OMAP clock: drop clk_get_usecount()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 13/23] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 11/23] OMAP clock: rearrange clock.h structure order
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 14/23] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 10/23] OMAP2/3 clock: remove clk->owner
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 12/23] OMAP2/3 clock: don't use a barrier after clk_disable()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 09/23] OMAP2 clock: drop CONFIG_PARTICIPANT clock flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 06/23] OMAP clock: drop the RATE_PROPAGATES flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 07/23] OMAP clock: drop RATE_FIXED
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 04/23] OMAP clock: support "dry run" rate and parent changes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 08/23] OMAP clock: remove VIRTUAL_CLOCK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 05/23] OMAP clock: track child clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 03/23] OMAP2/3 clock: drop recalc function pointers from fixed rate clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 02/23] OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 01/23] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH v2 00/23] OMAP clock: bug fixes, cleanup, optimization
  • From: Paul Walmsley <paul@xxxxxxxxx>
• omap mmc: remove duplicated #include's
  • From: Huang Weiyi <weiyi.huang@xxxxxxxxx>
• RE: Communication protocol through PCI between host and target
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• Communication protocol through PCI between host and target
  • From: "arun c" <arun.edarath@xxxxxxxxx>
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns corrected
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH] OMAP2: gptimer min_delta_ns corrected
  • From: Aaro Koskinen <Aaro.Koskinen@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• Re: LPDDR memory for TI OMAP 3503 processor
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: LPDDR memory for TI OMAP 3503 processor
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• LPDDR memory for TI OMAP 3503 processor
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Interfacing TI OMAP35xx processor with an FPGA
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• ADC timeout on Overo
  • From: Frank Agius <ftagius@xxxxxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
• Re: Revert "OMAP: HSMMC: Implement scatter-gather emulation"
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• Re: [PATCH] USB: OTG: twl4030 build fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Power Management question...
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• RE: [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH] OMAP2: gptimer min_delta_ns should be rounded up
  • From: Aaro Koskinen <Aaro.Koskinen@xxxxxxxxx>
• Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Don't mask rtc-twl4030 alarm interrupts on shutdown
  • From: "Felipe Balbi" <felipebalbi@xxxxxxxxxxxxxxxxxxxxx>
• Re: using git with linux-omap
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: using git with linux-omap
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: using git with linux-omap
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• using git with linux-omap
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Otto Solares <solca@xxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Otto Solares <solca@xxxxxxxx>
• RE: [PATCH 00/22] Series short description
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] OMAP2: fix recent build breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: "Kalle Vahlman" <kalle.vahlman@xxxxxxxxx>
• [PATCH 6/7] OMAP2/3 clock: add clock prepare-rate-change notifications
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 7/7] OMAP2/3 clock: add clock abort-rate-change notifications
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/7] OMAP2/3 clock: add clock pre-rate-change notification
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/7] OMAP2/3 clock: add clk post-rate-change notifiers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/7] OMAP2/3 clock: store planned clock rates into temporary rate storage
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/7] OMAP2/3 clock: implement clock notifier infrastructure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/7] OMAP clock: add notifier infrastructure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/7] OMAP2/3 clock: implement clock rate change notifiers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: "Hemanth V" <hemanthv@xxxxxx>
• Re: Nokia Internet Tablets
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH 00/22] OMAP clock: bug fixes, cleanup, optimization
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 17/22] OMAP2/3 clock: omap2_clk_enable(): refactor usecount check
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 19/22] OMAP2/3 clock: omap2_clk_enable(): fix usecount decrement bug
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 16/22] OMAP2/3 clock: every clock must have a clkdm
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 15/22] OMAP clock: drop clk_get_usecount()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 21/22] OMAP2/3 clock: don't tinker with hardirqs when they are supposed to be disabled
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 20/22] OMAP2/3 clock: omap2_clk_enable(): fix logic
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 22/22] OMAP3 SmartReflex: get rid of custom clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 18/22] OMAP2/3 clock: omap2_clk_enable(): fix bugs in clockdomain handling
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 12/22] OMAP2/3 clock: don't use a barrier after clk_disable()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/22] OMAP2 clock: drop CONFIG_PARTICIPANT clock flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 13/22] OMAP2xxx clock: consolidate DELAYED_APP clock commits; fix barrier
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 11/22] OMAP clock: rearrange clock.h structure order
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/22] OMAP2/3 clock: remove clk->owner
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 14/22] OMAP2/3 clock: convert remaining MPU barriers into OCP barriers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/22] OMAP clock: drop RATE_FIXED
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/22] OMAP clock: drop the RATE_PROPAGATES flag
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/22] OMAP clock: remove VIRTUAL_CLOCK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/22] OMAP clock: support "dry run" rate and parent changes
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/22] OMAP clock: track child clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 03/22] OMAP2/3 clock: drop recalc function pointers from fixed rate clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/22] OMAP clock: move rate recalc, propagation code up to plat-omap/clock.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/22] OMAP2/3 clock: use standard set_rate fn in omap2_clk_arch_init()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/22] Series short description
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP2: fix recent build breakage
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: FYI: Retu RTC script for setting and storing system time in N8x0
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: "Kainan Cha" <thezha@xxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [REVIEW] v4l2 debugging: match drivers by name instead of the deprecated ID
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• RE: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: Nokia Internet Tablets
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH] OMAP3: GPIO fixes for off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [REVIEW] v4l2 debugging: match drivers by name instead of the deprecated ID
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: Nokia Internet Tablets
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [REVIEW] v4l2 debugging: match drivers by name instead of the deprecated ID
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Nokia Internet Tablets
  • From: Otto Solares <solca@xxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: "pramod gurav" <pramodforum@xxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: "pramod gurav" <pramodforum@xxxxxxxxx>
• Re: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: status of USB on omap35xx ?
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Pierre Ossman <drzeus-mmc@xxxxxxxxx>
• Re: I2C1 controller timed out issue
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [REVIEW] v4l2 debugging: match drivers by name instead of the deprecated ID
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• I2C1 controller timed out issue
  • From: "pramod gurav" <pramodforum@xxxxxxxxx>
• Re: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [OMAPZOOM][PATCH] DSPBRIDGE Memory flush function fix
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: N810 suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Extended driver private controls?
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [alsa-devel] [PATCHv2 1/1] Fix a Oops bug in omap soc driver.
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [alsa-devel][PATCHv2 1/1] Fix a Oops bug in omap soc driver.
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [alsa-devel][PATCHv2 1/1] Fix a Oops bug in omap soc driver.
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [alsa-devel][PATCHv2 1/1] Fix a Oops bug in omap soc driver.
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: USB slightly broken
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: USB slightly broken
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: USB slightly broken
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• FYI: Retu RTC script for setting and storing system time in N8x0
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: N810 suspend
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• USB slightly broken
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH] OMAP: MMC: recover from transfer failures
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: Brian Swetland <swetland@xxxxxxxxxx>
• Re: GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [REVIEW PATCH] OMAP3 ISP-Camera: Added BT656 support
  • From: hvaibhav@xxxxxx
• Re: N810 suspend
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• RE: [PATCH] ARM: OMAP3: Enable writing to XCCR and RCCR McBSP registers for OMAP 2430/34xx
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• SoC: OMAP: Initialize XCCR and RCCR registers in McBSP DAI driver
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• [PATCH] ARM: OMAP3: Enable writing to XCCR and RCCR McBSP registers for OMAP 2430/34xx
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• Re: N810 suspend
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registersfor McBSP DAI driver
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• RE: [PATCH][OMAP3][sDMA] : Fixing the DMA chain transfer callback.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registers for McBSP DAI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH][OMAP3][sDMA] : Fixing the DMA chain transfer callback.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registers for McBSP DAI driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registers for McBSP DAI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• RE: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: N810 suspend
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registers for McBSP DAI driver
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: N810 suspend
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• GPIO switch framework (was: Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update)
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP3: Initialize XCCR and RCCR McBSP registers for McBSP DAI driver
  • From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
• RE: [PATCH] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [ANNOUNCE] updated PM branch
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [ANNOUNCE] updated PM branch
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: Krishna Kishore <krishna.kishore@xxxxxxxxxx>
• Re: OMAP3: DVFS core patch set
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: N810 suspend
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 1/1] LCD backlight support for OMAP3 EVM using TPS6235x based power module
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• RE: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [ANNOUNCE] updated PM branch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• RE: DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [ANNOUNCE] updated PM branch
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [ANNOUNCE] updated PM branch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] TPS6235x based Power regulator support added
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• TPS65950 ac/USB charger
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• RE: Issue: TWL4030-USB
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• DSP/IOMMU needs 128-byte alignment from user-space buffers?
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: N810 suspend
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 1/1] OMAP3 EVM MMC1 support for TPS based PR785 power modules
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: [PATCH] USB: OTG: twl4030 build fix
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] USB: OTG: twl4030 build fix
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] USB: OTG: twl4030 build fix
  • From: Greg KH <greg@xxxxxxxxx>
• Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: Issue: TWL4030-USB
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Issue: TWL4030-USB
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: Issue: TWL4030-USB
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Issue: TWL4030-USB
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [REVIEW PATCH 13/14] OMAP: CAM: Add Lens Driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Issue: TWL4030-USB
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH] OMAP3: PM: Scale VDD2 OPP for VDD1 OPP3 and higher
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [RFC/PATCH] OMAP: MMC: recover from transfer failures
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• [PATCH 3/3] OMAP3: PM: enable gptimer12 as a wakeup source
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] OMAP: dmtimer: enable all timers to be wakeup events
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP: move GP timer selection alongside other timer options
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] enable GP timer 12 as wakeup source
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: [REVIEW PATCH 13/14] OMAP: CAM: Add Lens Driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [REVIEW PATCH 12/14] OMAP: CAM: Add Sensor Driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: N810 suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810 suspend
  • From: green <greenfreedom10@xxxxxxxxx>
• Re: [REVIEW PATCH 07/14] OMAP: CAM: Add ISP CSI2 API
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810 suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] Default MUX configuration added - GPIO140-143, GPIO0 and GPIO9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 04/14] OMAP: CAM: Add ISP Front end
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH] OMAP3: PM: Scale VDD2 OPP for VDD1 OPP3 and higher
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH][OMAP3][sDMA] : Fixing the DMA chain transfer callback.
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 1/1] Default MUX configuration added - GPIO140-143, GPIO0 and GPIO9
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• [PATCH 2/2] Changes for adding TPS6235x based PR785 board support
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [PATCH 1/2] TPS6235x based Power regulator support added
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: N810 suspend
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: N810 suspend
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [PATCH 1/1] Default MUX configuration added - GPIO140-143, GPIO0 and GPIO9
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH 1/1] Default MUX configuration added - GPIO140-143, GPIO0 and GPIO9
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [ANNOUNCE] updated PM branch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [OMAPZOOM][PATCH] ISP: Set dcsub in omap board file.
  • From: Dominic Curran <dcurran@xxxxxx>
• Re: [PATCH] OMAP: Fix dpll4_m4_ck clk_set_rate()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3: SDRC: fix walking of SDRC params list
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2: PM: fix fault in enter_full_retention()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH][OMAPZOOM] OMAP3: Initialize XCCR and RCCR registers for McBSP DAI driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH][OMAPZOOM] padconfig for NEC WVGA lcd
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810 suspend
  • From: green <greenfreedom10@xxxxxxxxx>
• [PATCH] USB: OTG: twl4030 build fix
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP2 OneNAND GPIO fix
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3: SDRC: fix walking of SDRC params list
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• [PATCH] OMAP2/3: SDRC: fix walking of SDRC params list
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP: wait for pwrdm transition after clk_enable()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: wait for pwrdm transition after clk_enable()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• git pull request for omap mmc init changes (Re: [PATCH 0/5] Omap MMC init updates and new controller for 2.6.29 merge window)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PM OMAP3: Change omap3_save_secure_ram to be called only during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Omap1 updates for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: N810 suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: OMAP3: DVFS core patch set
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Omap1 updates for 2.6.29 merge window
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: N810 suspend
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• N810 suspend
  • From: green <greenfreedom10@xxxxxxxxx>
• [PATCH] ARM: MMU: add a Non-cacheable Normal executable memory type
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v3] MUSB: fix srp sysfs entry deletion
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH v3] MUSB: fix srp sysfs entry deletion
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [OMAPZOOM] [PATCH] DSPBRIDGE DSP getProcessor state fix
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH v2] MUSB: fix wrongly created sysfs entry
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/23] ARM: MMU: add a Non-cacheable Normal executable memory type
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v2] MUSB: fix wrongly created sysfs entry
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH v2] MUSB: fix wrongly created sysfs entry
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap-git] twl4030 usb regulator support tweaks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH v2] MUSB: fix wrongly created sysfs entry
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH] MUSB: fix wrongly created sysfs entry
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap-git 0/5] drivers/usb/otg seeding
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/23] OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memory
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 01/23] ARM: MMU: add a Non-cacheable Normal executable memory type
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Provide the set_power at TWL4030 MMC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap-git 1/2] twl4030-usb: cleanup debug code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 04/14] OMAP: CAM: Add ISP Front end
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 07/14] OMAP: CAM: Add ISP CSI2 API
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [REVIEW PATCH 04/14] OMAP: CAM: Add ISP Front end
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: McBSP register question
  • From: "Jason Marini" <jason.marini@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Juha Yrjölä <juha.yrjola@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Juha Yrjölä <juha.yrjola@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [REVIEW PATCH 1/1] OMAP3EVM support-Refreshed against latest Tomis code-base
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [PATCH] ARM: OMAP: Add support for dynamic GPIO switch update
  • From: Jani Nikula <ext-jani.1.nikula@xxxxxxxxx>
• Re: [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: Instructions and design notes for using TI TSC2007 touch screen controller chip
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Instructions and design notes for using TI TSC2007 touch screen controller chip
  • From: Elvis Dowson <elvis.dowson@xxxxxxx>
• [REVIEW PATCH 1/1] OMAP3EVM support-Refreshed against latest Tomis code-base
  • From: hvaibhav@xxxxxx
• RE: [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• RE: [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: McBSP register question
  • From: "shekhar, chandra" <x0044955@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• [RESEND REVIEW PATCH 00/14] OMAP3 camera + ISP + MT9P012 sensor driver (tarball)
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: status of USB on omap35xx ?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: status of USB on omap35xx ?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• McBSP register question
  • From: "Jason Marini" <jason.marini@xxxxxxxxx>
• Re: ANyone have success using a BDI-200 to debug an OMAP3xx board?
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• [PATCH - Omapzoom] [NAND] [OMAP2]: Change __raw_readsl() to __raw_readsw()
  • From: "vimal singh" <vimalsingh@xxxxxx>
• [PATCH] PM OMAP3: Change omap3_save_secure_ram to be called only during init
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] OMAP: wait for pwrdm transition after clk_enable()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [REVIEW PATCH 13/14] OMAP: CAM: Add Lens Driver
  • From: "Alexey Klimov" <klimov.linux@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix dpll4_m4_ck clk_set_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Revert "OMAP: HSMMC: Implement scatter-gather emulation"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3: DVFS core patch set
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Calling an I2C camera sensor with SMBUS API?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: Calling an I2C camera sensor with SMBUS API?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Calling an I2C camera sensor with SMBUS API?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• RE: [PATCH 2/3] OMAP3 EHCI: use clock framework to program DPLL5, DPLL5_M2_CLK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 2/3] OMAP3 EHCI: use clock framework to program DPLL5, DPLL5_M2_CLK
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 3/3] OMAP3 clock: Add debugging in omap3_noncore_dpll_enable()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/3] OMAP3 EHCI: use clock framework to program DPLL5, DPLL5_M2_CLK
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/3] OMAP3 EHCI: drop unnecessary debug writes, per Vikram Pandita
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/3 NOT FOR MERGING] ehci-omap clock rewrite test patches
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• [REVIEW PATCH 12/14] OMAP: CAM: Add Sensor Driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 11/14] OMAP34XXCAM: Add driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 14/14] OMAP34XX: CAM: Add Sensors Support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 09/14] OMAP: CAM: Add ISP gain tables
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 13/14] OMAP: CAM: Add Lens Driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 07/14] OMAP: CAM: Add ISP CSI2 API
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 04/14] OMAP: CAM: Add ISP Front end
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 02/14] v4l2-int-device: add support for VIDIOC_QUERYMENU
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 01/14] V4L: Int if: Dummy slave
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [REVIEW PATCH 00/14] OMAP3 camera + ISP + MT9P012 sensor driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: status of USB on omap35xx ?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• ANyone have success using a BDI-200 to debug an OMAP3xx board?
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• [PATCH] OMAP2 OneNAND GPIO fix
  • From: Jean Pihet <jpihet@xxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• [PATCH] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH 20/23] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 20/23] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 12/23] OMAP3 clock: initialize SDRC timings at kernel start
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 07/23] OMAP3 SDRC: initialize SDRC_POWER at boot
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 10/23] OMAP3 clock: use pr_debug() rather than pr_info() in some clock change code
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 22/23] OMAP3: PM: Enable VDD2 OPP1
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 23/23] OMAP3: PM: Fix linker error without CONFIG_PM option
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 05/23] OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 06/23] OMAP3 SDRC: Add 166MHz, 83MHz SDRC settings for the BeagleBoard
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 21/23] OMAP3: PM: Prevented DVFS state switches when enabling off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 04/23] OMAP3 clock: add interconnect barriers to CORE DPLL M2 change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 19/23] OMAP3: Fix rate calculation bug in omap3_select_table_rate
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 20/23] OMAP3: Add support for DPLL3 divisor values higher than 2
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• OMAP3: DVFS core patch set
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 18/23] OMAP3: PM: Added DVFS OPP locking interface for VDD1 and VDD2
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>