Tero Kristo <tero.kristo@xxxxxxxxx> writes:
> Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control.
>
Tero,
What is this patch against? It doesn't apply to current PM branch,
current l-o HEAD or on top of you DVFS patchset.
Kevin
> Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxx>
> ---
> arch/arm/mach-omap2/clock34xx.c | 9 +++------
> arch/arm/mach-omap2/sram34xx.S | 8 +++++---
> arch/arm/plat-omap/include/mach/sram.h | 7 +++++--
> arch/arm/plat-omap/sram.c | 6 +++---
> 4 files changed, 16 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
> index d6d4b46..b38cb30 100644
> --- a/arch/arm/mach-omap2/clock34xx.c
> +++ b/arch/arm/mach-omap2/clock34xx.c
> @@ -516,9 +516,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
>
> sdrcrate = sdrc_ick.rate;
> if (rate > clk->rate)
> - sdrcrate <<= ((rate / clk->rate) - 1);
> + sdrcrate <<= ((rate / clk->rate) >> 1);
> else
> - sdrcrate >>= ((clk->rate / rate) - 1);
> + sdrcrate >>= ((clk->rate / rate) >> 1);
>
> sp = omap2_sdrc_get_params(sdrcrate);
> if (!sp)
> @@ -545,13 +545,10 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
> pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
> sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
>
> - /* REVISIT: SRAM code doesn't support other M2 divisors yet */
> - WARN_ON(new_div != 1 && new_div != 2);
> -
> local_irq_disable();
> omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
> sp->actim_ctrlb, new_div, unlock_dll, c,
> - sp->mr);
> + sp->mr, rate > clk->rate);
> local_irq_enable();
>
> omap2_clksel_recalc(clk);
> diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
> index 16eb4ef..487fa86 100644
> --- a/arch/arm/mach-omap2/sram34xx.S
> +++ b/arch/arm/mach-omap2/sram34xx.S
> @@ -70,6 +70,7 @@
> * r5 = number of MPU cycles to wait for SDRC to stabilize after
> * reprogramming the SDRC when switching to a slower MPU speed
> * r6 = new SDRC_MR_0 register value
> + * r7 = increasing SDRC rate? (1 = yes, 0 = no)
> *
> */
> ENTRY(omap3_sram_configure_core_dpll)
> @@ -77,9 +78,10 @@ ENTRY(omap3_sram_configure_core_dpll)
> ldr r4, [sp, #52] @ pull extra args off the stack
> ldr r5, [sp, #56] @ load extra args from the stack
> ldr r6, [sp, #60] @ load extra args from the stack
> + ldr r7, [sp, #64] @ load extra args from the stack
> dsb @ flush buffered writes to interconnect
> - cmp r3, #0x2 @ if increasing SDRC clk rate,
> - blne configure_sdrc @ program the SDRC regs early (for RFR)
> + cmp r7, #1 @ if increasing SDRC clk rate,
> + bleq configure_sdrc @ program the SDRC regs early (for RFR)
> cmp r4, #SDRC_UNLOCK_DLL @ set the intended DLL state
> bleq unlock_dll
> blne lock_dll
> @@ -89,7 +91,7 @@ ENTRY(omap3_sram_configure_core_dpll)
> cmp r4, #SDRC_UNLOCK_DLL @ wait for DLL status to change
> bleq wait_dll_unlock
> blne wait_dll_lock
> - cmp r3, #0x1 @ if increasing SDRC clk rate,
> + cmp r7, #1 @ if increasing SDRC clk rate,
> beq return_to_sdram @ return to SDRAM code, otherwise,
> bl configure_sdrc @ reprogram SDRC regs now
> mov r12, r5
> diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
> index d07da3b..ad0a600 100644
> --- a/arch/arm/plat-omap/include/mach/sram.h
> +++ b/arch/arm/plat-omap/include/mach/sram.h
> @@ -24,7 +24,8 @@ extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
> extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
> u32 sdrc_actim_ctrla,
> u32 sdrc_actim_ctrlb, u32 m2,
> - u32 unlock_dll, u32 f, u32 sdrc_mr);
> + u32 unlock_dll, u32 f, u32 sdrc_mr,
> + u32 inc);
> extern void omap3_sram_restore_context(void);
>
> /* Do not use these */
> @@ -62,7 +63,9 @@ extern unsigned long omap243x_sram_reprogram_sdrc_sz;
>
> extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
> u32 sdrc_actim_ctrla,
> - u32 sdrc_actim_ctrlb, u32 m2);
> + u32 sdrc_actim_ctrlb, u32 m2,
> + u32 unlock_dll, u32 f, u32 sdrc_mr,
> + u32 inc);
> extern unsigned long omap3_sram_configure_core_dpll_sz;
>
> #ifdef CONFIG_PM
> diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
> index 68a1f69..9f6232f 100644
> --- a/arch/arm/plat-omap/sram.c
> +++ b/arch/arm/plat-omap/sram.c
> @@ -372,10 +372,10 @@ static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
> u32 sdrc_actim_ctrla,
> u32 sdrc_actim_ctrlb,
> u32 m2, u32 unlock_dll,
> - u32 f, u32 sdrc_mr);
> + u32 f, u32 sdrc_mr, u32 inc);
> u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
> u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
> - u32 f, u32 sdrc_mr)
> + u32 f, u32 sdrc_mr, u32 inc)
> {
> if (!_omap3_sram_configure_core_dpll)
> omap_sram_error();
> @@ -383,7 +383,7 @@ u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
> return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
> sdrc_actim_ctrla,
> sdrc_actim_ctrlb, m2,
> - unlock_dll, f, sdrc_mr);
> + unlock_dll, f, sdrc_mr, inc);
> }
>
> #ifdef CONFIG_PM
> --
> 1.5.4.3
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
