Re: [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Nov 28, 2008 at 05:34:57PM -0800, Tony Lindgren wrote:
> From: Paul Walmsley <paul@xxxxxxxxx>
> 
> i2c-omap discriminates only between "revision 1" or "greater than
> revision 1."  A following patch introduces code that must also
> discriminate between rev2.x, rev3.6, and rev3.12 controllers.  Support
> this by storing the full revision data from the I2C_REV register, rather
> than just a single bit.
> 
> The revision definitions may need to be extended for other ES levels
> that aren't currently available here.  rev3.6 is what's present on the
> 2430SDP here (unknown ES revision); rev3.12 is used on the 3430ES2
> here.
> 
> Signed-off-by: Paul Walmsley <paul@xxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
> ---
>  drivers/i2c/busses/i2c-omap.c |   25 ++++++++++++++++---------
>  1 files changed, 16 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 40a1e4b..3ac510d 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -38,6 +38,13 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  
> +/* I2C controller revisions */
> +#define OMAP_I2C_REV_2			0x20
> +
> +/* I2C controller revisions present on specific hardware */
> +#define OMAP_I2C_REV_ON_2430		0x36
> +#define OMAP_I2C_REV_ON_3430		0x3C
> +
>  /* timeout waiting for the controller to respond */
>  #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
>  
> @@ -139,7 +146,7 @@ struct omap_i2c_dev {
>  						 * fifo_size==0 implies no fifo
>  						 * if set, should be trsh+1
>  						 */
> -	unsigned		rev1:1;
> +	u8			rev;
>  	unsigned		b_hw:1;		/* bad h/w fixes */
>  	unsigned		idle:1;
>  	u16			iestate;	/* Saved interrupt register */
> @@ -209,7 +216,7 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  
>  	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
>  	omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
> -	if (dev->rev1) {
> +	if (dev->rev < OMAP_I2C_REV_2) {
>  		iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
>  	} else {
>  		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
> @@ -231,7 +238,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>  	unsigned long timeout;
>  	unsigned long internal_clk = 0;
>  
> -	if (!dev->rev1) {
> +	if (dev->rev >= OMAP_I2C_REV_2) {
>  		omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST);
>  		/* For some reason we need to set the EN bit before the
>  		 * reset done bit gets set. */
> @@ -710,6 +717,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  	struct omap_i2c_dev	*dev;
>  	struct i2c_adapter	*adap;
>  	struct resource		*mem, *irq, *ioarea;
> +	void *isr;

There is a proper definition for the function type in
<linux/interrupt.h>

>  	int r;
>  	u32 speed = 0;
>  
> @@ -760,8 +768,7 @@ omap_i2c_probe(struct platform_device *pdev)
>  
>  	omap_i2c_unidle(dev);
>  
> -	if (cpu_is_omap15xx())
> -		dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
> +	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
>  
>  	if (cpu_is_omap2430() || cpu_is_omap34xx()) {
>  		u16 s;
> @@ -782,16 +789,16 @@ omap_i2c_probe(struct platform_device *pdev)
>  	/* reset ASAP, clearing any IRQs */
>  	omap_i2c_init(dev);
>  
> -	r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr,
> -			0, pdev->name, dev);
> +	isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
> +	r = request_irq(dev->irq, isr, 0, pdev->name, dev);
>  
>  	if (r) {
>  		dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
>  		goto err_unuse_clocks;
>  	}
> -	r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
> +
>  	dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
> -		 pdev->id, r >> 4, r & 0xf, dev->speed);
> +		 pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
>  
>  	omap_i2c_idle(dev);
>  
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben (ben@xxxxxxxxx, http://www.fluff.org/)

  'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux