Off mode is now using the omap2 retention fix code for scanning GPIOs during off-mode transitions. All the *non_wakeup_gpios variables are now used for off-mode transition tracking on OMAP3. This patch fixes cases where GPIO state changes are missed during off-mode. Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxx> --- arch/arm/mach-omap2/pm34xx.c | 10 ++++++---- arch/arm/plat-omap/gpio.c | 29 ++++++++++++++++++++--------- 2 files changed, 26 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c67d770..66f2b22 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -330,14 +330,15 @@ void omap_sram_idle(void) core_next_state = pwrdm_read_next_pwrst(core_pwrdm); if (per_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(2); - omap2_gpio_prepare_for_retention(); if (per_next_state == PWRDM_POWER_OFF) { if (core_next_state == PWRDM_POWER_ON) { per_next_state = PWRDM_POWER_RET; pwrdm_set_next_pwrst(per_pwrdm, per_next_state); per_state_modified = 1; - } else + } else { + omap2_gpio_prepare_for_retention(); omap3_per_save_context(); + } } } @@ -411,9 +412,10 @@ void omap_sram_idle(void) /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); - if (per_prev_state == PWRDM_POWER_OFF) + if (per_prev_state == PWRDM_POWER_OFF) { omap3_per_restore_context(); - omap2_gpio_resume_after_retention(); + omap2_gpio_resume_after_retention(); + } omap_uart_resume_idle(2); if (per_state_modified) pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 83a5953..db40037 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -540,7 +540,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, else __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); - } else { + } + /* This part needs to be executed always for OMAP34xx */ + if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; else @@ -1456,7 +1458,8 @@ static int __init _omap_gpio_init(void) /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); - if (i < ARRAY_SIZE(non_wakeup_gpios)) + if (cpu_is_omap24xx() && + i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } @@ -1626,10 +1629,13 @@ static int workaround_enabled; void omap2_gpio_prepare_for_retention(void) { int i, c = 0; + int min = 0; + if (cpu_is_omap34xx()) + min = 1; /* Remove triggering for all non-wakeup GPIOs. Otherwise spurious * IRQs will be generated. See OMAP2420 Errata item 1.101. */ - for (i = 0; i < gpio_bank_count; i++) { + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l1, l2; @@ -1644,10 +1650,12 @@ void omap2_gpio_prepare_for_retention(void) bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) - __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); -#endif + if (cpu_is_omap24xx()) { + __raw_writel(l1, bank->base + + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + + OMAP24XX_GPIO_RISINGDETECT); + } c++; } if (!c) { @@ -1660,10 +1668,13 @@ void omap2_gpio_prepare_for_retention(void) void omap2_gpio_resume_after_retention(void) { int i; + int min = 0; if (!workaround_enabled) return; - for (i = 0; i < gpio_bank_count; i++) { + if (cpu_is_omap34xx()) + min = 1; + for (i = min; i < gpio_bank_count; i++) { struct gpio_bank *bank = &gpio_bank[i]; u32 l; @@ -1683,7 +1694,7 @@ void omap2_gpio_resume_after_retention(void) l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); #endif l ^= bank->saved_datain; - l &= bank->non_wakeup_gpios; + l &= bank->enabled_non_wakeup_gpios; if (l) { u32 old0, old1; #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html