The PM branch has been consolidated and rebased against today's
linux-omap HEAD. I've also included a few patches that were posted to
the list that had fallen through the cracks.
Reminder: The branch name is 'pm'. It will continue to be called pm
and just be periodially rebased against linux-omap HEAD.
Some patchsets that have been submitted, but are still not included:
- [PATCH 0/2] Bug fixes for DVFS (Peter)
- waiting for updated patch descriptions
- OMAP3: DVFS core patch set (Tero, Paul, Peter)
- waiting for a split
- OMAP3: GPIO fixes for off-mode
- waiting for review comments to be addresed
Kevin
git-shortlog:
Carlos Chinea (1):
OMAP3:PM: Update SSI omapdev record
Jouni Hogander (6):
OMAP: UART: Add sysfs interface for adjusting UART sleep timeout
OMAP3: PM: Use pwrdm_set_next_pwrst instead of set_pwrdm_state in idle loop
OMAP3: PM: Fix wrong sequence in suspend.
OMAP3: PM: Do not build suspend code if SUSPEND is not enabled
OMAP: PM: Build fails if PM is not enabled
OMAP2: PM: Fix omap2 build
Kalle Jokiniemi (3):
OMAP: PM: sysfs interface for enabling voltage off in idle
OMAP3: PM: Fix cpu idle init sequencing
OMAP: SRF: Fixes to shared resource framework (Ver.3)
Kevin Hilman (11):
OMAP3: PM: Add wake-up bit defintiions for CONTROL_PADCONF_X
OMAP3: PM: UART: disable clocks when idle
OMAP3: PM: UART save/restore support for OFF-mode
OMAP3: PM: Force IVA2 into idle during bootup
OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
OMAP3: PM: D2D clockdomain supports SW supervised transitions
OMAP3: PM: Ensure modem is reset during PRCM init
OMAP3: PM: CPUidle: obey enable_off_mode flag
OMAP3: PM: CPUidle: restrict C-states on UART activity
OMAP3: PM: decouple PER and CORE context save and restore
OMAP2/3: PM: system_rev -> omap_rev()
Paul Walmsley (6):
OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer.
OMAP2/3 omapdev: add basic omapdev structure
OMAP242x omapdev: add OMAP242x omapdev records
OMAP243x omapdev: add OMAP243x omapdev records
OMAP3xxx omapdev: add OMAP3xxx omapdev records
OMAP2/3 omapdev: add code to walk the omapdev records
Peter 'p2' De Schrijver (10):
OMAP: PM counter infrastructure.
OMAP: PM: Hook into PM counters
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each.
OMAP: PM: Add pm-debug counters
OMAP: PM debug: make powerdomains use PM-debug counters
OMAP: PM: Add definitions for ETK pads and observability registers
OMAP: Debug observability and ETK padconf implementation
OMAP: Add debug observablity (debobs) Kconfig item
OMAP: PM: Implement get_last_off_on_transaction_id()
Save sram context after changing MPU, DSP or core clocks
Rajendra Nayak (34):
OMAP3: PM: GPMC context save/restore
OMAP3: PM: GPIO context save/restore
OMAP3: PM: I2C context save/restore
OMAP3: PM: INTC context save/restore
OMAP3: PM: PRCM context save/restore
OMAP3: PM: Populate scratchpad contents
OMAP3: PM: SCM context save/restore
OMAP3: PM: SRAM restore function
OMAP3: PM: handle PER/NEON/CORE in idle
OMAP3: PM: Restore MMU table entry
OMAP3: PM: MPU off-mode support
OMAP3: PM: CORE domain off-mode support
OMAP3: PM: allow runtime enable/disable of OFF mode
OMAP3: 3430SDP minimal kernel defconfig
OMAP3: PM: CPUidle: Basic support for C1-C2
OMAP3: PM: CPUidle: Enables state C4
OMAP3: PM: CPUidle: Enables C3 and C5
OMAP3: PM: CPUidle: Safe-state on bm-activity
OMAP3 SRF: Generic shared resource f/w
OMAP3 SRF: MPU/CORE/PD latency modeling
OMAP3 SRF: omap3 srf driver
OMAP3 SRF: OMAP PM srf implementation
OMAP3 SRF: Add CORE rate table param in OMAP-PM
OMAP3 SRF: Add VDD1/VDD2 rate tables for 3430SDP
OMAP3 SRF: Add virt clk nodes for VDD1/VDD2
OMAP3 SRF: Adds OPP/Freq res's in SRF
OMAP3 SRF: Update OMAP-PM layer
OMAP3 SRF: Voltage scaling support
OMAP3 SRF: VDD2 scaling support
OMAP3 SRF: Adds sysfs control for VDD1/VDD2 OPP's
OMAP3 PM: Replace spinlocks with mutex in SRF
OMAP3 PM: CPUFreq driver for OMAP3
OMAP3 PM: Update the min defconfig for 3430sdp
OMAP3 SRF: Fix crash on non-3430SDP platforms with DVFS/CPUFreq
Tero Kristo (16):
PM: OMAP3: Make sure clk_disable_unused() order is correct
OMAP: PM debug: do not print out status for meta powerdomains (dpll*)
OMAP: PM debug: Add PRCM register dump support
OMAP: PM: DMA context save / restore
OMAP: PM: off-mode support for DMA on EMU/HS devices
OMAP3: SRAM size fix for HS/EMU devices
OMAP3 PM: off-mode support for HS/EMU devices
OMAP3: PM: Enable SDRAM auto-refresh during sleep
OMAP: SDRC: Add new register definitions for SDRAM controller
OMAP3: PM: SDRC auto-refresh workaround for off-mode
PM: Added three PLL registers to the PRCM context save
PM: Changed secure RAM storage size from 0x8000 to 0x803F
PM: Added suspend target state control to debugfs for OMAP3
OMAP3: PM: Prevent PER from going OFF when CORE is going INA
PM OMAP3: Change omap3_save_secure_ram to be called only during init
OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
