[PATCH 1/3] OMAP: move GP timer selection alongside other timer options

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/Kconfig |   16 ----------------
 arch/arm/plat-omap/Kconfig  |   15 +++++++++++++++
 2 files changed, 15 insertions(+), 16 deletions(-)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index ca24a7a..0a86a88 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -132,19 +132,3 @@ config MACH_OVERO
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
-
-config OMAP_TICK_GPTIMER
-	int "GPTIMER used for system tick timer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	range 1 12
-	default 1
-	help
-	  Linux uses one of the twelve on-board OMAP GPTIMER blocks to generate
-	  system tick interrupts.  The twelve GPTIMERs have slightly
-	  different powerdomain, source clock, and security properties
-	  (mostly documented in the OMAP3 TRMs) that can affect the selection
-	  of which GPTIMER to use.  The historical default is GPTIMER1.
-	  If CONFIG_OMAP_32K_TIMER is selected, Beagle may require GPTIMER12
-	  due to hardware sensitivity to glitches on the OMAP 32kHz clock
-	  input.
-
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 960c13f..c9e1396 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -214,6 +214,21 @@ config OMAP_32K_TIMER_HZ
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
+config OMAP_TICK_GPTIMER
+	int "GPTIMER used for system tick timer"
+	depends on ARCH_OMAP2 || ARCH_OMAP3
+	range 1 12
+	default 1
+	help
+	  Linux uses one of the twelve on-board OMAP GPTIMER blocks to generate
+	  system tick interrupts.  The twelve GPTIMERs have slightly
+	  different powerdomain, source clock, and security properties
+	  (mostly documented in the OMAP3 TRMs) that can affect the selection
+	  of which GPTIMER to use.  The historical default is GPTIMER1.
+	  If CONFIG_OMAP_32K_TIMER is selected, Beagle may require GPTIMER12
+	  due to hardware sensitivity to glitches on the OMAP 32kHz clock
+	  input.
+
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
 	depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
-- 
1.6.0.3

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux