Linux for Texus Instruments OMAP Processors

• Thread Index

• [PATCH 17/23] OMAP3: PM: Fixed VDD2 control to work from both sysfs and SRF API
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 16/23] OMAP3 SRAM: convert SRAM code to use macros rather than magic numbers
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 08/23] OMAP3 SRAM: renumber registers to make space for argument passing
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 11/23] OMAP3 clock: remove wait for DPLL3 M2 clock to stabilize
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 14/23] OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock change
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 15/23] OMAP3 SRAM: add more comments on the SRAM code
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 13/23] OMAP3 clock: add a short delay when lowering CORE clk rate
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 09/23] OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHz
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 01/23] ARM: MMU: add a Non-cacheable Normal executable memory type
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 03/23] OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpll
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 02/23] OMAP3 SRAM: mark OCM RAM as Non-cacheable Normal memory
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] OMAP: wait for pwrdm transition after clk_enable/disable()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 2/5] OMAP242x omapdev: add OMAP242x omapdev records
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 2/5] OMAP242x omapdev: add OMAP242x omapdev records
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• RE: status of USB on omap35xx ?
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: status of USB on omap35xx ?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: 2.6.27-omap2 tag?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Jeff Steele <jsteele@xxxxxxxxxxxxxxxxxxx>
• Re: status of USB on omap35xx ?
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: 2.6.27-omap2 tag?
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• 2.6.27-omap2 tag?
  • From: "Sriram V" <vshrirama@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH - Omapzoom][NAND] 32-bit read in prefetch for NAND
  • From: "vimal singh" <vimalsingh@xxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [PATCH PM] OMAP: UART: Add sysfs interface for adjusting UART sleep timeout
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• status of USB on omap35xx ?
  • From: Jeff Steele <jsteele@xxxxxxxxxxxxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/9] OMAP: HSMMC: Make driver support dynamic idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: Lauri Leukkunen <lauri.leukkunen@xxxxxxxxx>
• [PATCH PM] OMAP: UART: Add sysfs interface for adjusting UART sleep timeout
  • From: Jouni Hogander <jouni.hogander@xxxxxxxxx>
• Re: MLC NAND support on OMAP35xx
  • From: Artem Bityutskiy <dedekind@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH 10/11] ARM: OMAP: Switch to gpio_request/free calls, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• MLC NAND support on OMAP35xx
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH] Removes unused platform device for osk5912
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Removes unused platform device for osk5912
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] Removes unused platform device for osk5912
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Add TI TSC2005 Touchscreen driver
  • From: Sam Ravnborg <sam@xxxxxxxxxxxx>
• [PATCH] Add TI TSC2005 Touchscreen driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCHv2 0/3] OMAP_LDP support in linux-git tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Branch for fbdriver (Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate())
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Branch for fbdriver (Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate())
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] OMAP: Fix dpll4_m4_ck clk_set_rate()
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• RE: [PATCH 1/1] Relocating struct regulator_dev to include/linux/regulator/driver.h.
  • From: Liam Girdwood <lrg@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/1] Default MUX configuration added for GPIO140-143, GPIO0 and GPIO9
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/1] Relocating struct regulator_dev to include/linux/regulator/driver.h.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• RE: [PATCH 1/1] Relocating struct regulator_dev to include/linux/regulator/driver.h.
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCHv2 0/3] OMAP_LDP support in linux-git tree
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• [PATCH 2/2] Fixing some comments for TPS6235x driver.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [PATCH 1/2] TPS6235x driver added into the power regulator framework
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [PATCH 1/1] Default MUX configuration added for GPIO140-143, GPIO0 and GPIO9
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: [PATCH 1/1] Relocating struct regulator_dev to include/linux/regulator/driver.h.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• [PATCH 1/1] Relocating struct regulator_dev to include/linux/regulator/driver.h.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console, v2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/5] omap mmc: Add new omap hsmmc controller for 2430 and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/5] omap mmc: force MMC module reset on boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/5] omap mmc: Add low-level initialization for hsmmc controller
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/5] omap mmc: Add better MMC low-level init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/5] omap mmc: Remove broken MMC init code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/5] Omap MMC init updates and new controller for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH] Add stlc45xx, wi-fi driver for stlc4550/4560
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• Re: [PATCH] Add stlc45xx, wi-fi driver for stlc4550/4560
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Omap1 updates for 2.6.29 merge window
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] Add stlc45xx, wi-fi driver for stlc4550/4560
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• [PATCH] stlc45xx: wi-fi driver for stlc4550/4560 chipset
  • From: Kalle Valo <kalle.valo@xxxxxxxxx>
• [PATCH] OMAP2: PM: fix fault in enter_full_retention()
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/5] OMAP3: PM: D2D clockdomain supports SW supervised transitions
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [PATCH v2 3/5] OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [PATCH v2 1/5] OMAP3: PM: HSMMC: force MMC module reset on boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 2/5] OMAP3: PM: Force IVA2 into idle during bootup
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Branch for fbdriver (Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate())
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: mmc broken?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: mmc broken?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: mmc broken?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [FYI PATCH] ASOC:TWL4030 Audio capture fix
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: mmc broken?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• mmc broken?
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH v2 1/5] OMAP3: PM: HSMMC: force MMC module reset on boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2/3 clock: fix DPLL rate calculation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP: Add clk_get_parent() for OMAP2/3
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Setting dss1_alwon_fck rate
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bug: enabling USB-TLL fclk
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: Setting dss1_alwon_fck rate
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 6/6] ARM: OMAP3: Pin multiplexing updates for 24xx and 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP3: Add basic support for Pandora handheld console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP3: DMA: Fix for sDMA Errata 1.113
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: OMAP3: LDP: Add Ethernet device support to make ldp boot succeess
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP3: Add OMAP34xx pin multiplexing into I2C bus registration helper
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP3: Warn about spurious interrupts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Omap3 updates for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] Add OMAP2 camera driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCHv2 0/3] OMAP_LDP support in linux-git tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Bug in linux omap clock framework?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OneNAND: OMAP2: Switch to generic gpio calls
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Remove drivers/input/touchscreen/omap directory?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [linux-omap] [PATCH 2/2] DSPBRIDGE: Freeing allocated resources on rmmod
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• Bug in linux omap clock framework?
  • From: <Tomi.Valkeinen@xxxxxxxxx>
• Re: Remove drivers/input/touchscreen/omap directory?
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Remove drivers/input/touchscreen/omap directory?
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RE: [PATCH 1/2] Addition of Set Routing ioctl support[V5]
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• [PATCH 2/2] TVP514x Driver with Review comments fixed [V5]
  • From: hvaibhav@xxxxxx
• [PATCH 1/2] Addition of Set Routing ioctl support[V5]
  • From: hvaibhav@xxxxxx
• [PATCH] OneNAND: OMAP2: Switch to generic gpio calls
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/1] Save sram context after changing MPU, DSP or core clocks
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• RE: [PATCH 1/1] Save sram context after changing MPU, DSP or core clocks
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [linux-omap] [PATCH 2/2] DSPBRIDGE: Freeing allocated resources on rmmod
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [irda-users] [PATCH] OMAP IrDA driver
  • From: <samuel@xxxxxxxxxx>
• Setting dss1_alwon_fck rate
  • From: <Tomi.Valkeinen@xxxxxxxxx>
• [linux-omap] [PATCH 2/2] DSPBRIDGE: Freeing allocated resources on rmmod
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [linux-omap][PATCH 1/2] DSPBRIDGE: Handle Hibernation requested from DSP
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [PATCH] Removes unused platform device for osk5912
  • From: arunks@xxxxxxxxxxxxxxxxxxxx
• [PATCH 6/6] ARM: OMAP2: skip unnecessary TLDR write during non-autoreload for gptimer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 5/6] ARM: OMAP2: drop redundant pending write check for gptimer
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] ARM: OMAP2: bard-h4: list those eeproms
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] ARM: OMAP2: Use omap_rev() instead of system_rev
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] ARM: OMAP2: Fix cpu detection
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] ARM: OMAP2: Prepare cpu detection for further improvements
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Omap2 updates for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] ARM: OMAP1: osk5912: LED trigger update for CF
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP1: osk5912: Mistral eeprom support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/2] Omap1 updates for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: "Kwangwoo Lee" <kwangwoo.lee@xxxxxxxxx>
• Re: git-pull request for i2c-omap updates (Re: [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5)
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH 2.6.28-rc6 1/1] Fix OMAP/README docummentation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2 STI: fix build breakage
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omapfb: Fix argument of blank operation.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/1] MMC1 support for OMAP3 EVM with PR785 power modules
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] Add OMAP2 camera driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Your Email Was Selected....Xmax Promo..
  • From: Nokia Global Communication <saccsecretary@xxxxxxxxxxxxxxxxx>
• Re: OMAP Zoom kernel ALSA build problem
  • From: David Brownell <david-b@xxxxxxxxxxx>
• OMAP Zoom kernel ALSA build problem
  • From: "Smith, Stephen" <smsmith@xxxxxx>
• Re: [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] MMC1 support for OMAP3 EVM with PR785 power modules
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 1/1] MMC1 support for OMAP3 EVM with PR785 power modules
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• RE: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/2] Put in supportframework for PR785 board.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/2] Putting TPS6235x into the power regulator framework
  • From: y@xxxxxxxxxxxx
• [PATCH 1/2] Put in supportframework for PR785 board.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
  • From: "Sam Duan" <sam_duan@xxxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] [OMAPZOOM] OMAP : DMA: Spurious interrupt fix
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: "Kwangwoo Lee" <kwangwoo.lee@xxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: "Kwangwoo Lee" <kwangwoo.lee@xxxxxxxxx>
• Problems unblanking backlight in 2.6.27
  • From: Peter Barada <peter@xxxxxxxxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [ANNOUNCE] new PM branch: pm-20081119
  • From: "Sriram V" <vshrirama@xxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] Add tsc2007 based touchscreen driver.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• [PATCH 2.6.28-rc6 1/1] Fix OMAP/README docummentation
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• [PATCH 2.6.28-rc6 0/1] Fix OMAP/README docummentation
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [PATCH] Add OMAP2 camera driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OneNAND: OMAP2: Switch to gpio_request/free calls (OMAP and mainline)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 1/2] ARM: OMAP: SX1: Switch to gpio_request calls (OMAP and mainline)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 0/2] legacy gpio phaseout (V) ...
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH 2/2] OneNAND: OMAP2: Switch to gpio_request/free calls (OMAP and mainline)
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RE: [PATCH] Add OMAP2 camera driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [PATCH] Add OMAP2 camera driver
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed [V4]
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed [V4]
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed [V4]
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] Make sure omap cpufreq driver initializes after cpufreq framework and governors
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed [V4]
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• [PATCH 2/2] TVP514x Driver with Review comments fixed [V4]
  • From: hvaibhav@xxxxxx
• [PATCH 1/2] Addition of set/get Routing ioctl support[V4]
  • From: hvaibhav@xxxxxx
• [PATCH 0/2] Bug fixes for DVFS
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/2] Fix omap_getspeed.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/2] Make sure omap cpufreq driver initializes after cpufreq framework and governors
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• RE: Oops in MMC
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: Oops in MMC
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• RE: Oops in MMC
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: Oops in MMC
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: Oops in MMC
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: Oops in MMC
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Oops in MMC
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• RE: [PATCH] OMAP3: GPIO fixes for off-mode
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap-git 5/5] move drivers/i2c/chips/twl4030-usb.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [patch 2.6.28-rc6-omap-git 5/5] move drivers/i2c/chips/twl4030-usb.c
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [ANNOUNCE] new PM branch: pm-20081119
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Andy Walls <awalls@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git] twl4030 usb regulator support tweaks
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 5/5] move drivers/i2c/chips/twl4030-usb.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 4/5] move OMAP's transceiver glue to drivers/usb/otg
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 3/5] add missing otg_put_transceiver() call
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 2/5] add new gpio_vbus "transceiver"
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 1/5] move drivers/i2c/chips/isp1301-omap.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 0/5] drivers/usb/otg seeding
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO fixes for off-mode
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RFC: [PATCH] Change VDD2 setopp to use bus throughput
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH] fix a pile of OMAP issues
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH v2 0/5] extra module resets to ensure full-chip idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 5/5] OMAP3: PM: Ensure modem is reset during PRCM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/5] OMAP3: PM: D2D clockdomain supports SW supervised transitions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/5] OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/5] OMAP3: PM: Force IVA2 into idle during bootup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 1/5] OMAP3: PM: HSMMC: force MMC module reset on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/5] extra module resets to ensure full-chip idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [ANNOUNCE] new PM branch: pm-20081119
  • From: "Sriram V" <vshrirama@xxxxxxxxx>
• [PATCH] fix a pile of OMAP issues
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: GPIO fixes for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: Prevent PER from going OFF when CORE is going INA
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH PM 1/1] OMAP3:PM: Update SSI omapdev record
  • From: Carlos Chinea <carlos.chinea@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH] Add Omnivision OV9640 sensor support.
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
• [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-ng
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH] OMAP3: GPIO fixes for off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Resending: OMAP3 GPIO fixes for off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] OMAP3: PM: Prevent PER from going OFF when CORE is going INA
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH 1/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• [PATCH 0/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH 1/1] OMAP3: DMA: Enable idlemodes for DMA OCP
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• [PATCH] OMAP2/3 clock: fix DPLL rate calculation
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP2 STI: fix build breakage
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Andy Walls <awalls@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Andy Walls <awalls@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [PATCH v2] v4l2_device/v4l2_subdev: final (?) version
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RE: [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• RE: [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• git-pull request for i2c-omap updates (Re: [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/11] ARM: OMAP: Switch ohci-omap to gpio_request/free calls
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 12/12] i2c-omap: Enable I2C wakeups for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] i2c-omap: reprogram OCP_SYSCONFIG register after reset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/12] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/12] i2c-omap: Clean-up i2c-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/12] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/12] i2c-omap: Mark init-only functions as __init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/12] i2c-omap: Add support for omap34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/12] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/12] i2c-omap: Add high-speed support to omap-i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/12] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/12] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/12] i2c-omap: Enable I2C wakeups for 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/12] i2c-omap: reprogram OCP_SYSCONFIG register after reset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/12] i2c-omap: convert 'rev1' flag to generic 'rev' u8
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/12] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un, }idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/12] i2c-omap: Clean-up i2c-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/12] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/12] i2c-omap: Mark init-only functions as __init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/12] i2c-omap: Add support for omap34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/12] i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/12] i2c-omap: Add high-speed support to omap-i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/12] i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/12] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/12] Updates for i2c-omap for 2.6.29 merge window, v4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/11] ARM: OMAP: Switch ohci-omap to gpio_request/free calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/11] ARM: OMAP: Switch to gpio_request/free calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/11] ARM: OMAP: minor gpio bugfixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/11] ARM: OMAP: make legacy gpio request/free calls superfluous
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/11] ARM: OMAP: use gpio_to_irq
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/11] ARM: OMAP: switch to gpio_direction_output
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/11] ARM: OMAP: switch to gpio_direction_input
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/11] ARM: OMAP: switch to standard gpio get/set calls
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/11] ARM: OMAP: gpios implement new to_irq()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/11] ARM: OMAP: Extend gpio label column width in omap_gpio debugfs file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/11] ARM: OMAP: Enable GPIO debounce clock only when debounce is enabled v3
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/11] Omap gpio updates for review for 2.6.29 merge window
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: v4l2_device/v4l2_subdev: please review (PATCH 1/3)
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: "Hiremath, Vaibhav" <hvaibhav@xxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/3] TPS6235x drivers added in drivers/i2c/chips.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: hvaibhav@xxxxxx
• [PATCH 1/2] Add Input/Output related ioctl support
  • From: hvaibhav@xxxxxx
• [PATCH] OMAP IrDA driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• RE: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Add Omnivision OV9640 sensor support.
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 2/3] TPS6235x drivers added in drivers/i2c/chips.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: "Gupta, Ajay Kumar" <ajay.gupta@xxxxxx>
• Re: [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 2/3] TPS6235x drivers added in drivers/i2c/chips.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 1/1] Adding support for NAND partitions in OMAP3 EVM.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• PATCH[0/3] - Framework for TPS device drivers on PR785 power
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• [PATCH 3/3] musb: Remvoing twl4030 dependency for OMAP3EVM MUSB
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [PATCH 2/3] TPS6235x drivers added in drivers/i2c/chips.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• [PATCH 1/3] Adding-support-framework for PR785 board.
  • From: Manikandan Pillai <mani.pillai@xxxxxx>
• PATCH[0/3] - Framework for TPS device drivers on PR785 power
  • From: "Pillai, Manikandan" <mani.pillai@xxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH] Provide the set_power at TWL4030 MMC
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCHv2 1/1] OMAP_TWL4030 SoC Audio driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [alsa-devel] [PATCHv2 1/1] OMAP_TWL4030 SoC Audio driver.
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCHv2 0/3] OMAP_LDP support in linux-git tree
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• [PATCH 2/2] OMAP: Support LCD display as a FB device on ZOOM MDK
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• [PATCH 1/2] OMAP: Add OMAP_LDP platform support.
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCH 02/10] omap mailbox: add initial omap3 support
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [alsa-devel][PATCHv2 1/1] OMAP_TWL4030 SoC Audio driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• [alsa-devel][PATCHv2 1/1] OMAP_TWL4030 SoC Audio driver.
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• [alsa-devel][PATCHv2 0/1] OMAP_TWL4030 SoC Audio driver.
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: "stanley.miao" <stanley.miao@xxxxxxxxxxxxx>
• [PATCH] OMAP3: GPIO fixes for off-mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH] OMAP: Add a Video RAM manager
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] OMAP3 SDP: example use of OMAP VRAM
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] OMAP: Change OMAPFB to use the VRAM manager
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• OMAP VRAM patch set intro
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH 2/2] Enable LEDs in pandora defconfig
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• [PATCH 1/2] Add support for GPIO LEDs on pandora
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: i2c-omap: Fix standard and fast mode prescalers
  • From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
• Re: [PATCH 1/9] OMAP: HSMMC: Make driver support dynamic idle
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH 3/9] OMAP: HSMMC: Make fclk disable request driven.
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• [PATCH] Provide the set_power at TWL4030 MMC
  • From: Kyungmin Park <kmpark@xxxxxxxxxxxxx>
• RE: ARM : OMAP: Pass logical DMA channel number always to callback handlers
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: "Trilok Soni" <soni.trilok@xxxxxxxxx>
• Re: [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 2/2] twl4030-usb: get rid of OMAP1 OTG hooks
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap-git 1/2] twl4030-usb: cleanup debug code
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 3/3] OMAP3: PM: UART save/restore support for OFF-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] OMAP3: PM: UART: disable clocks when idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP3: PM: Add wake-up bit defintiions for CONTROL_PADCONF_X
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] OMAP: PM: enable UART clock disabling when idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] OMAP3: PM: HSMMC: force MMC module reset on boot
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] 8250: when waking, PM hook should be called before accessing port
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] 8250: Allow platform to register PM hook
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/5] OMAP3: PM: Ensure modem is reset during PRCM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4/5] OMAP3: PM: D2D clockdomain supports SW supervised transitions
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/5] OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/5] OMAP3: PM: Force IVA2 into idle during bootup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/5] OMAP3: PM: HSMMC: force MMC module reset on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/5] extra module resets to ensure full-chip idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] ARM: OMAP: Fixes for suspend / resume GPIO wake-up handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Typo fix for clock_allow_idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Remove broken LCD driver for SX1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• git-pull request for omap-fixes for 2.6.28
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCHv2 0/3] OMAP_LDP support in linux-git tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP Framebuffer memory allocation and mapping
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap] twl4030-power: minor cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap] twl4030: linkage fix for generic power scripts
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MCSPI: Enable mcspi wake-up v2.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: Fixes for suspend / resume GPIO wake-up handling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• [patch 2.6.28-rc6-omap] twl4030-power: minor cleanup
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.28-rc6-omap] twl4030: linkage fix for generic power scripts
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Add OMAP2 camera driver
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH] Fix crash on non-3430SDP platforms with DVFS/CPUFreq
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] OMAP3: PM: readability fix for IVA2 DPLL autoidle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/9] OMAP: HSMMC: Make driver support dynamic idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/9] OMAP: HSMMC: Make fclk disable request driven.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: Fixes for suspend / resume GPIO wake-up handling
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] PM: Added suspend target state control to debugfs for OMAP3
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/1] Save sram context after changing MPU, DSP or core clocks
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] OMAP2/3 GPTIMER: skip unnecessary TLDR write during non-autoreload
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MCSPI: Enable mcspi wake-up v2.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH][OMAPZOOM][2/2] Disable OV3640 sensor support in omap_zoom2_defconfig file
  • From: "Aguilar Pena, Leed" <leed.aguilar@xxxxxx>
• [PATCH][OMAPZOOM][1/2] Cleanup for zoom2 board file: OV3640 sensor is not supported
  • From: "Aguilar Pena, Leed" <leed.aguilar@xxxxxx>
• Re: [PATCH 2/2] OMAP2/3 GPTIMER: skip unnecessary TLDR write during non-autoreload
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] omap mailbox: add initial omap3 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix omap-gpio warnings when compiling for ARCH_OMAP15XX
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] OMAP: MCSPI: Enable mcspi wake-up v2.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix omap-gpio warnings when compiling for ARCH_OMAP15XX
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Fix argument of blank operation.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fix for dispc's error "omapfb omapfb: irq error status 4020"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omap3evm LCD red-tint workaround
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: Patch to enable omapfb scaling
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] SDTI: Add netlink support for debug message output.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Add Input/Output related ioctl support
  • From: Hans Verkuil <hverkuil@xxxxxxxxx>
• [PATCH 2/2] TVP514x Driver with Review comments fixed
  • From: hvaibhav@xxxxxx
• [PATCH 1/2] Add Input/Output related ioctl support
  • From: hvaibhav@xxxxxx
• Re: [PATCH] OMAP general SOC driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] i2c: i2c-omap: Fix standard and fast mode prescalers
  • From: ext-eero.nurkkala@xxxxxxxxx
• [PATCH] Fix crash on non-3430SDP platforms with DVFS/CPUFreq
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• Re: ARM : OMAP: Pass logical DMA channel number always to callback handlers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• [PATCH] OMAP3: Fixes for suspend / resume GPIO wake-up handling
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH] OMAP general SOC driver.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• RE: ARM : OMAP: Pass logical DMA channel number always to callback handlers
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [PATCH] OMAP general SOC driver.
  • From: "Stanley.Miao" <stanley.miao@xxxxxxxxxxxxx>
• [PATCH] PM: Added suspend target state control to debugfs for OMAP3
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: ARM : OMAP: Pass logical DMA channel number always to callback handlers
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: Please fix or remove OMAP2 onenand driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• ARM : OMAP: Pass logical DMA channel number always to callback handlers
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [patch 1/4] twl: update overo and pandora i2c data
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 02/10] omap mailbox: add initial omap3 support
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap] sync isp1301_omap with mainlne
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap 2/2] remove gpio_expander_omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc6-omap 1/2] H3 stops using <mach/gpioexpander.h>
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc5 5/5] twl4030 cleanup symbols and OMAP dependency
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.28-rc5 0/5] twl4030 irq assignments
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 1/4] twl: update overo and pandora i2c data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] Typo fix for clock_allow_idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Extend gpio label column width in omap_gpio debugfs file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] legacy gpio phaseout (IV) ...
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Parse ATAG_VIDEOLFB to screen_info
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/10] omap mailbox: add initial omap3 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: Fix TW4030 Kconfig dependency
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: Fix TW4030 Kconfig dependency
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• [PATCH] OMAP3: PM: Force IVA2 into idle during botoup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• [PATCH] omapfb: Fix argument of blank operation.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [alsa-devel] [PATCH] ASoC: Fix TW4030 Kconfig dependency
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: PWM drivers for TWL4030
  • From: David Brownell <david-b@xxxxxxxxxxx>