On Wednesday 26 November 2008 18:04:39 hvaibhav@xxxxxx wrote:
> From: Vaibhav Hiremath <hvaibhav@xxxxxx>
>
> Note - Resending again with TVP driver for completeness.
>
> Added ioctl support for query std, set std, enum input,
> get input, set input, enum output, get output and set output.
>
> For sensor kind of slave drivers v4l2-int-device.h provides
> necessary ioctl support, but the ioctls required to interface
> with decoders and encoders are missing. Most of the decoders
> and encoders supports multiple inputs and outputs, like
> S-Video or Composite.
>
> With these ioctl''s user can select the specific input/output.
>
> Signed-off-by: Brijesh Jadav <brijesh.j@xxxxxx>
> Signed-off-by: Hardik Shah <hardik.shah@xxxxxx>
> Signed-off-by: Manjunath Hadli <mrh@xxxxxx>
> Signed-off-by: R Sivaraj <sivaraj@xxxxxx>
> Signed-off-by: Vaibhav Hiremath <hvaibhav@xxxxxx>
> Signed-off-by: Karicheri Muralidharan <m-karicheri2@xxxxxx>
> ---
> include/media/v4l2-int-device.h | 17 +++++++++++++++++
> 1 files changed, 17 insertions(+), 0 deletions(-)
>
> diff --git a/include/media/v4l2-int-device.h
> b/include/media/v4l2-int-device.h index 9c2df41..2325b2a 100644
> --- a/include/media/v4l2-int-device.h
> +++ b/include/media/v4l2-int-device.h
> @@ -102,6 +102,7 @@ enum v4l2_power {
> V4L2_POWER_OFF = 0,
> V4L2_POWER_ON,
> V4L2_POWER_STANDBY,
> + V4L2_POWER_RESUME,
> };
Why is POWER_RESUME added? In an earlier discussion with Sakari Ailus it
was decided not to add this (see the video4linux thread with
subject "[PATCH 4/6] V4L: Int if: Define new power state changes").
It also wasn't in your original patch.
Regards,
Hans
>
> /* Slave interface type. */
> @@ -183,6 +184,14 @@ enum v4l2_int_ioctl_num {
> vidioc_int_s_crop_num,
> vidioc_int_g_parm_num,
> vidioc_int_s_parm_num,
> + vidioc_int_querystd_num,
> + vidioc_int_s_std_num,
> + vidioc_int_enum_input_num,
> + vidioc_int_g_input_num,
> + vidioc_int_s_input_num,
> + vidioc_int_enumoutput_num,
> + vidioc_int_g_output_num,
> + vidioc_int_s_output_num,
>
> /*
> *
> @@ -284,6 +293,14 @@ V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *);
> V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *);
> V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *);
> V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *);
> +V4L2_INT_WRAPPER_1(querystd, v4l2_std_id, *);
> +V4L2_INT_WRAPPER_1(s_std, v4l2_std_id, *);
> +V4L2_INT_WRAPPER_1(enum_input, struct v4l2_input, *);
> +V4L2_INT_WRAPPER_1(g_input, int, *);
> +V4L2_INT_WRAPPER_1(s_input, int, );
> +V4L2_INT_WRAPPER_1(enumoutput, struct v4l2_output, *);
> +V4L2_INT_WRAPPER_1(g_output, int, *);
> +V4L2_INT_WRAPPER_1(s_output, int, );
>
> V4L2_INT_WRAPPER_0(dev_init);
> V4L2_INT_WRAPPER_0(dev_exit);
> --
> 1.5.6
>
> --
> video4linux-list mailing list
> Unsubscribe
> mailto:video4linux-list-request@xxxxxxxxxx?subject=unsubscribe
> https://www.redhat.com/mailman/listinfo/video4linux-list
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
