On Fri, Dec 5, 2008 at 4:49 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > * Tony Lindgren <tony@xxxxxxxxxxx> [081205 16:34]: >> * Steve Sakoman <sakoman@xxxxxxxxx> [081205 16:31]: >> > I attempted an Overo build this afternoon with >> > fb3d15c023ff08c879155db630895f38526b95f6. >> > >> > I set bootargs for rootfs on mmc. The boot progresses normally and >> > then hangs waiting for the rootfs to mount. >> > >> > Where I previously got: >> > >> > Waiting for root device /dev/mmcblk0p2... >> > mmc0: host does not support reading read-only switch. assuming write-enable. >> > mmc0: new SD card at address ee21 >> > mmcblk0: mmc0:ee21 SU02G 1.89 GiB >> > mmcblk0: p1 p2 >> > >> > I now get: >> > >> > Waiting for root device /dev/mmcblk0p2... >> > >> > Has anyone else seen mmc issues with rc7? >> >> I think I did it again while cleaning up.. Can you try this patch? >> The name was conflicting with the other MMC omap driver. > > Actually now it breaks for earlier omaps, it needs to be like this > patch instead. Heh, isn't that how it always goes! Two steps forward, one step back :-) I tested your first patch and it did indeed solve the issue. Looks like your second patch will also work. I'll verify this later this evening. Steve -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
