Various bootloaders have been known to leave modules in a state
which prevents full-chip retention. This series forces
MMC, IVA2 and D2D/modem into known reset/idle states so that
the OMAP3 can hit full-chip idle.
Tested on OMAP3 Beagle, and custom OMAP3 hardware.
NOTE: this is similar to the set I posted for the PM branch
but this series is rebased onto linux-omap and includes
the MMC reset.
Kevin Hilman (5):
OMAP3: PM: HSMMC: force MMC module reset on boot
OMAP3: PM: Force IVA2 into idle during bootup
OMAP3: PM: Add D2D clocks and auto-idle setup to PRCM init
OMAP3: PM: D2D clockdomain supports SW supervised transitions
OMAP3: PM: Ensure modem is reset during PRCM init
arch/arm/mach-omap2/clock34xx.h | 37 ++++++++++++-
arch/arm/mach-omap2/clockdomains.h | 2 +-
arch/arm/mach-omap2/cm-regbits-34xx.h | 14 +++++
arch/arm/mach-omap2/devices.c | 85 +++++++++++++++++++++++++++++
arch/arm/mach-omap2/pm34xx.c | 65 ++++++++++++++++++++++-
arch/arm/plat-omap/include/mach/control.h | 5 ++
6 files changed, 204 insertions(+), 4 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
