Pandora has some LEDs and backlights connected to OMAP
GPIOs and TWL4030/TPS65950 LED/PWM signals. This patch
registers them all with leds-gpio driver. TWL4030/TPS65950
controlled ones will be switched to PWM driver when it's ready.
Signed-off-by: Grazvydas Ignotas <notasas@xxxxxxxxx>
---
arch/arm/mach-omap2/board-omap3pandora.c | 60 ++++++++++++++++++++++++++++++
1 files changed, 60 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 69517a5..2dfa988 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -28,6 +28,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -166,6 +167,53 @@ static struct omap_uart_config omap3pandora_uart_config __initdata = {
.enabled_uarts = (1 << 2), /* UART3 */
};
+static struct gpio_led omap3pandora_gpio_leds[] = {
+ {
+ .name = "pandora::keypad_bl",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ }, {
+ .name = "pandora::power",
+ .default_trigger = "default-on",
+ .gpio = -EINVAL,
+ .active_low = true,
+ }, {
+ .name = "pandora::lcd_bl",
+ .default_trigger = "backlight",
+ .gpio = -EINVAL,
+ }, {
+ .name = "pandora::charger",
+ .gpio = -EINVAL,
+ }, {
+ .name = "pandora::sd1",
+ .default_trigger = "mmc0",
+ .gpio = 128,
+ }, {
+ .name = "pandora::sd2",
+ .default_trigger = "mmc1",
+ .gpio = 129,
+ }, {
+ .name = "pandora::bluetooth",
+ .gpio = 158,
+ }, {
+ .name = "pandora::wifi",
+ .gpio = 159,
+ },
+};
+
+static struct gpio_led_platform_data omap3pandora_gpio_led_data = {
+ .leds = omap3pandora_gpio_leds,
+ .num_leds = ARRAY_SIZE(omap3pandora_gpio_leds),
+};
+
+static struct platform_device omap3pandora_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &omap3pandora_gpio_led_data,
+ },
+};
+
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
@@ -174,6 +222,16 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
omap3pandora_mmc[1].gpio_cd = gpio + 1;
hsmmc_init(omap3pandora_mmc);
+ /* TWL4030_GPIO_MAX + 0 == ledA, KEYPAD_BACKLIGHT (out, active low) */
+ omap3pandora_gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 0;
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, POWER_LED (out, active low) */
+ omap3pandora_gpio_leds[1].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ /* gpio + {6,7} is PWM{0,1}, LCD_BACKLIGHT and CHARGER_LED */
+ omap3pandora_gpio_leds[2].gpio = gpio + 6;
+ omap3pandora_gpio_leds[3].gpio = gpio + 7;
+
return 0;
}
@@ -181,6 +239,7 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
.setup = omap3pandora_twl_gpio_setup,
};
@@ -285,6 +344,7 @@ static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
+ &omap3pandora_leds_gpio,
};
static void __init omap3pandora_init(void)
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
