From: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
More switchover to the cross-platform GPIO interface:
use gpio_direction_input(), not an OMAP-specific call.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap1/board-palmte.c | 4 ++--
arch/arm/mach-omap1/board-palmz71.c | 4 ++--
arch/arm/mach-omap1/board-voiceblue.c | 2 +-
arch/arm/mach-omap1/fpga.c | 2 +-
arch/arm/mach-omap1/serial.c | 2 +-
arch/arm/mach-omap2/board-2430sdp.c | 2 +-
arch/arm/mach-omap2/board-apollon.c | 8 ++++----
arch/arm/mach-omap2/usb-tusb6010.c | 2 +-
arch/arm/plat-omap/debug-devices.c | 2 +-
drivers/mtd/onenand/omap2.c | 2 +-
drivers/usb/host/ohci-omap.c | 2 +-
11 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index df663ba..0995a0f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -351,14 +351,14 @@ static void __init palmte_misc_gpio_setup(void)
printk(KERN_ERR "Could not reserve PINTDAV GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMTE_PINTDAV_GPIO, 1);
+ gpio_direction_input(PALMTE_PINTDAV_GPIO);
/* Set USB-or-DC-IN pin as input (unused) */
if (omap_request_gpio(PALMTE_USB_OR_DC_GPIO)) {
printk(KERN_ERR "Could not reserve cable signal GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMTE_USB_OR_DC_GPIO, 1);
+ gpio_direction_input(PALMTE_USB_OR_DC_GPIO);
}
static void __init omap_palmte_init(void)
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index c33766c..5a232ad 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -331,7 +331,7 @@ palmz71_gpio_setup(int early)
printk(KERN_ERR "Could not reserve WP GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMZ71_MMC_WP_GPIO, 1);
+ gpio_direction_input(PALMZ71_MMC_WP_GPIO);
/* Monitor the Power-cable-connected signal */
if (omap_request_gpio(PALMZ71_USBDETECT_GPIO)) {
@@ -339,7 +339,7 @@ palmz71_gpio_setup(int early)
"Could not reserve cable signal GPIO!\n");
return;
}
- omap_set_gpio_direction(PALMZ71_USBDETECT_GPIO, 1);
+ gpio_direction_input(PALMZ71_USBDETECT_GPIO);
if (request_irq(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
palmz71_powercable, IRQF_SAMPLE_RANDOM,
"palmz71-cable", 0))
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index d7ab11a..86e73b7 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -256,7 +256,7 @@ void voiceblue_wdt_disable(void)
gpio_set_value(0, 0);
gpio_set_value(0, 1);
gpio_set_value(0, 0);
- omap_set_gpio_direction(0, 1);
+ gpio_direction_input(0);
}
void voiceblue_wdt_ping(void)
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0499538..40cf504 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -178,7 +178,7 @@ void omap1510_fpga_init_irq(void)
* gpio.[ch]
*/
omap_request_gpio(13);
- omap_set_gpio_direction(13, 1);
+ gpio_direction_input(13);
set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
}
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 528691d..1a0bc47 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -250,7 +250,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
gpio_nr);
return;
}
- omap_set_gpio_direction(gpio_nr, 1);
+ gpio_direction_input(gpio_nr);
ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
IRQF_TRIGGER_RISING, "serial wakeup", NULL);
if (ret) {
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 24688ef..f844a67 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -174,7 +174,7 @@ static inline void __init sdp2430_init_smc91x(void)
gpmc_cs_free(eth_cs);
goto out;
}
- omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
+ gpio_direction_input(OMAP24XX_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a4ba52c..abc9167 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -242,7 +242,7 @@ static inline void __init apollon_init_smc91x(void)
gpmc_cs_free(APOLLON_ETH_CS);
goto out;
}
- omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1);
+ gpio_direction_input(APOLLON_ETHR_GPIO_IRQ);
out:
clk_disable(gpmc_fck);
@@ -327,15 +327,15 @@ static void __init apollon_sw_init(void)
/* Enter SW - Y11 */
omap_cfg_reg(Y11_242X_GPIO16);
omap_request_gpio(SW_ENTER_GPIO16);
- omap_set_gpio_direction(SW_ENTER_GPIO16, 1);
+ gpio_direction_input(SW_ENTER_GPIO16);
/* Up SW - AA12 */
omap_cfg_reg(AA12_242X_GPIO17);
omap_request_gpio(SW_UP_GPIO17);
- omap_set_gpio_direction(SW_UP_GPIO17, 1);
+ gpio_direction_input(SW_UP_GPIO17);
/* Down SW - AA8 */
omap_cfg_reg(AA8_242X_GPIO58);
omap_request_gpio(SW_DOWN_GPIO58);
- omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
+ gpio_direction_input(SW_DOWN_GPIO58);
set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 10ef464..eb2399d 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -297,7 +297,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 3, status);
return status;
}
- omap_set_gpio_direction(irq, 1);
+ gpio_direction_input(irq);
tusb_resources[2].start = irq + IH_GPIO_BASE;
/* set up memory timings ... can speed them up later */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index e31154b..60076a8 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -77,7 +77,7 @@ int __init debug_card_init(u32 addr, unsigned gpio)
printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
return status;
}
- omap_set_gpio_direction(gpio, 1);
+ gpio_direction_input(gpio);
led_resources[0].start = addr;
led_resources[0].end = addr + SZ_4K - 1;
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index 8dda06c..c7145af 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -635,7 +635,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
"OneNAND\n", c->gpio_irq);
goto err_iounmap;
}
- omap_set_gpio_direction(c->gpio_irq, 1);
+ gpio_direction_input(c->gpio_irq);
if ((r = request_irq(OMAP_GPIO_IRQ(c->gpio_irq),
omap2_onenand_interrupt, IRQF_TRIGGER_RISING,
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 91697bd..22f6d19 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -255,7 +255,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
/* gpio9 for overcurrent detction */
omap_cfg_reg(W8_1610_GPIO9);
omap_request_gpio(9);
- omap_set_gpio_direction(9, 1 /* IN */);
+ gpio_direction_input(9);
/* for paranoia's sake: disable USB.PUEN */
omap_cfg_reg(W4_USB_HIGHZ);
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
