Linux IIO Development

• Thread Index

• [PATCH] drivers: iio: proximity: This patch fix the following checkpatch warning.
  • From: Mohan Kumar <mohankumar718@xxxxxxxxx>
• Re: [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] iio: adc: qcom-spmi-adc5: Fix of-based module autoloading
  • From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
• Re: [PATCH v3 00/26] compat_ioctl: cleanups
  • From: Douglas Gilbert <dgilbert@xxxxxxxxxxxx>
• [PATCH v3 12/26] compat_ioctl: move more drivers to compat_ptr_ioctl
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v3 00/26] compat_ioctl: cleanups
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC v3] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC v3] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• Re: [PATCH 1/3] remap: Add I3C bus support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• RE: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• RE: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• RE: [PATCH 2/3] i3c: Add i3c_get_device_id helper
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• RE: [PATCH 1/3] remap: Add I3C bus support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• RE: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Alexandre <amergnat@xxxxxxxxxxxx>
• Re: IIO on KernelDevDay
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [RESEND PATCH] drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [EXT] Re: [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: tsl2583: convert bindings to YAML format
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: tsl2772: convert bindings to YAML format
  • From: Brian Masney <masneyb@xxxxxxxxxxxxx>
• [PATCH V2] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 0/3] Add ST lsm6dso i3c suppport
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] i3c: Add i3c_get_device_id helper
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] remap: Add I3C bus support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [EXT] Re: [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH] drivers: iio: Add more data field for iio driver hysteresis parsing
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• IIO on KernelDevDay
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [RFC v3] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 3/3] iio: imu: st_lsm6dsx: Add i3c basic support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 1/3] remap: Add I3C bus support
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 2/3] i3c: Add i3c_get_device_id helper
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• [PATCH 0/3] Add ST lsm6dso i3c suppport
  • From: Vitor Soares <vitor.soares@xxxxxxxxxxxx>
• Re: [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: luis@xxxxxxxxxxxxxx
• Re: linux-next: Tree for Apr 8 (iio/adc/)
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/2] iio: adc: stm32-dfsdm: fix triggered buffer build dependency
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/2] iio: adc: stm32-dfsdm: fix build dependencies
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/2] iio: adc: stm32-dfsdm: fix unmet direct dependencies detected
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• RE: [PATCH] iio: dac: ad5758: Modifications for new revision
  • From: "Caprioru, Mircea" <Mircea.Caprioru@xxxxxxxxxx>
• [PATCH] iio: trigger: stm32-timer: fix build issue when disabled
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2 2/6] iio: imx7d_adc: Replace pr_err with dev_err
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 3/6] iio: imx7d_adc: Use devm_platform_ioremap_resource()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 1/6] iio: imx7d_adc: Add local struct device pointer in imx7d_adc_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 4/6] iio: imx7d_adc: Simplify imx7d_adc_probe() with imx7d_adc_resume()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 5/6] iio: imx7d_adc: Simplify imx7d_adc_remove() with imx7d_adc_suspend()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 6/6] iio: imx7d_adc: Use devm_iio_device_register()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2 0/6] i.MX7D ADC improvements
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [RFC v2] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• [RESEND PATCH] drivers/iio/gyro/mpu3050-core.c: This patch fix the following checkpatch warning.
  • From: Mohan Kumar <mohankumar718@xxxxxxxxx>
• Re: [EXT] Re: [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: inline per-sensor data
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 4/6] iio: gyro: fxas21002c: add spi driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/6] iio: gyro: add core driver for fxas21002c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/6] iio: gyro: fxas21002c: add i2c driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 5/6] ARM: dts: imx7s-warp: add fxas21002c gyroscope
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 6/6] MAINTAINERS: add entry for fxas21002c gyro driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] Kconfig: change configuration of srf04 ultrasonic iio sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] srf04.c: add maxbotix ultrasonic sensors
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5758: Modifications for new revision
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][next] iio: temperature: max31856: fix uninitialized error return
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [bug report] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variables 'acc_sensor' and 'gyro_sensor'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] drivers: iio: Add more data field for iio driver hysteresis parsing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: linux-next: Tree for Apr 8 (iio/adc/)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: inkern: Convert iio_read_avail_channel_raw into a wrapper
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: inkern: API for reading available iio channel attribute values
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: accel: add support to LIS2DE12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: accel: add LIS2DE12 sensor device binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] iio: imx7d_adc: Use imx7d_adc_resume() in imx7d_adc_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• Re: [PATCH 3/6] iio: imx7d_adc: Use devm_iio_device_register()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v6 6/6] MAINTAINERS: add entry for fxas21002c gyro driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 5/6] ARM: dts: imx7s-warp: add fxas21002c gyroscope
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 4/6] iio: gyro: fxas21002c: add spi driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 2/6] iio: gyro: add core driver for fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 3/6] iio: gyro: fxas21002c: add i2c driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v6 0/6] iio: gyro: add core driver for fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v3 0/2] Add support for the TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] drivers/clocksource: timer-fsl-ftm: use common header for FlexTimer #defines
  • From: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: Fix build error without CONFIG_GPIOLIB
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 0/2] iio: accel: add support for LIS2DE12
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v2 2/2] iio: accel: add support to LIS2DE12
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: accel: add LIS2DE12 sensor device binding
  • From: Robert Jones <rjones@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads7950: Fix build error without CONFIG_GPIOLIB
  • From: Justin Chen <justinpopo6@xxxxxxxxx>
• [PATCH][next] iio: temperature: max31856: fix uninitialized error return
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsr device bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC] iio: Handle enumerated properties with gaps
  • From: "andriy.shevchenko@xxxxxxxxxxxxxxx" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [RFC] iio: Handle enumerated properties with gaps
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ti-ads7950: Fix build error without CONFIG_GPIOLIB
  • From: Yue Haibing <yuehaibing@xxxxxxxxxx>
• Re: linux-next: manual merge of the staging tree with the staging.current tree
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: inline per-sensor data
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/3] Kconfig: change configuration of srf04 ultrasonic iio sensor
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/3] devantech-srf04.yaml: add Maxbotix ultrasonic iio proximity sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/3] srf04.c: add maxbotix ultrasonic sensors
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/3] add Maxbotix ultrasonic iio sensors with gpio bitbanging
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: linux-next: manual merge of the staging tree with the staging.current tree
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Daniel Baluta <daniel.baluta@xxxxxxxxx>
• [PATCH] iio: dac: ad5758: Modifications for new revision
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [PATCH v10 02/18] counter: Documentation: Add Generic Counter sysfs documentation
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [bug report] iio:temperature: Add MAX31856 thermocouple support
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variables 'acc_sensor' and 'gyro_sensor'
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v10 02/18] counter: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v10 01/18] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH -next] iio: imu: st_lsm6dsx: remove set but not used variables 'acc_sensor' and 'gyro_sensor'
  • From: YueHaibing <yuehaibing@xxxxxxxxxx>
• [PATCH] drivers: iio: Add more data field for iio driver hysteresis parsing
  • From: hongyan.song@xxxxxxxxx
• Re: [PATCH v10 02/18] counter: Documentation: Add Generic Counter sysfs documentation
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v10 01/18] counter: Introduce the Generic Counter interface
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] staging: iio: cdc: ad7746: Replace bitshift by BIT
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: linux-next: manual merge of the staging tree with the staging.current tree
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: linux-next: manual merge of the staging tree with the staging.current tree
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: linux-next: manual merge of the staging tree with the staging.current tree
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Crt Mori <cmo@xxxxxxxxxxx>
• Re: RFC on IIO AD7292 driver GSoC proposal
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• RE: [EXT] Re: [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• IIO moving to yaml dt-bindings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 00/18] Introduce the Counter subsystem
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ads124: avoid buffer overflow
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ads124: avoid buffer overflow
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: accel: kxcjk1013: Add KIOX0008 ACPI Hardware-ID
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/10] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] staging: iio: ad9832: use clock framework for clock reference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] staging: iio: ad9832: organize includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] staging: iio: ad9832: add SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] bmp085.yaml: transform DT documentation of iio sensor into YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] avia-hx711.yaml: transform DT binding to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/6] iio: imx7d_adc: Drop imx7d_adc_remove()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/6] iio: imx7d_adc: Use imx7d_adc_resume() in imx7d_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/6] iio: imx7d_adc: Use devm_platform_ioremap_resource()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/6] iio: imx7d_adc: Use devm_iio_device_register()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/6] iio: imx7d_adc: Replace pr_err with dev_err
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/6] iio: imx7d_adc: Add local struct device pointer in imx7d_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: adc: Add AD7616 ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ad7616: Add support for AD7616 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7606: Move oversampling options in chip info and rework *_avail attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: frequency: ad9834: Remove unnecessary parentheses
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsr device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: modify NPCM ADC read reference voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v1] iio: adc: modify NPCM ADC read reference voltage
  • From: Tomer Maimon <tmaimon77@xxxxxxxxx>
• RFC on IIO AD7292 driver GSoC proposal
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: iio: adc: Add AD7616 ADC documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: Luís Ferreira <luis@xxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: ot: Add docs pat9125
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: Add pixart vendor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH 0/3] Add PAT6125 optical tracker driver
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• Re: [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7766: Change alignment to match paranthesis
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL V2] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsr device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support for LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] staging: iio: cdc: ad7746: Replace bitshift by BIT
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH] iio: accell: mma8452: free iio trigger pointer when cleanup
  • From: Anson Huang <anson.huang@xxxxxxx>
• Re: [PATCH] staging: iio: cdc: ad7746: Replace bitshift by BIT
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v2 00/10] iio mount matrix - revitalize missing bindings documentation and provide code for bmc150, bmg160, bma180, itg3200, hmc584x
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH] staging: iio: cdc: ad7746: Replace bitshift by BIT
  • From: Lucas Oshiro <lucasseikioshiro@xxxxxxxxx>
• [PATCH] iio: adc: Fix MAX9611 spacing
  • From: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging:iio:accel:adis16203: add SPDX license identifier tag
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging:iio:accel:adis16203: add SPDX license identifier tag
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• [PATCH 2/2] staging:iio:accel:adis16240: add SPDX license identifier tag
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• [PATCH 1/2] staging:iio:accel:adis16203: add SPDX license identifier tag
  • From: Nicholas Mc Guire <hofrat@xxxxxxxxx>
• Re: [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 3/6] iio: imx7d_adc: Use devm_iio_device_register()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 2/6] iio: imx7d_adc: Replace pr_err with dev_err
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 4/6] iio: imx7d_adc: Use devm_platform_ioremap_resource()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 5/6] iio: imx7d_adc: Use imx7d_adc_resume() in imx7d_adc_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 6/6] iio: imx7d_adc: Drop imx7d_adc_remove()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 1/6] iio: imx7d_adc: Add local struct device pointer in imx7d_adc_probe()
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH 0/6] i.MX7D ADC improvements
  • From: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
• [PATCH v2] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: stevemo@xxxxxxxxxx
• Re: [PATCH] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Stepan Moskovchenko <stevemo@xxxxxxxxxx>
• [PATCH] staging: iio: frequency: ad9834: Remove unnecessary parentheses
  • From: Melissa Wen <melissa.srw@xxxxxxxxx>
• Re: [PATCH 4/4] staging: iio: ad9832: add devicetree documentation
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: Work on iio: stating: frequency: ad9832
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH] iio: accel: add missing sensor for some 2-in-1 based ultrabooks
  • From: Luís Ferreira <luis@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] staging: iio: ad9832: add SPDX identifier
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: adc: Add AD7616 ADC documentation
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/3] iio: adc: ad7616: Add support for AD7616 ADC
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/3] iio: adc: ad7606: Move oversampling options in chip info and rework *_avail attributes
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Work on iio: stating: frequency: ad9832
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PULL] First set of IIO fixes for the 5.1 cycle
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] staging: iio: ad9832: add devicetree documentation
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH v10 18/18] LS1021A: dtsi: add ftm quad decoder entries
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 17/18] counter: ftm-quaddec: Documentation: Add specific counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 16/18] counter: add FlexTimer Module Quadrature decoder counter driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 15/18] dt-bindings: counter: ftm-quaddec
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 14/18] drivers/clocksource: timer-fsl-ftm: use common header for FlexTimer #defines
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 13/18] drivers/pwm: pwm-fsl-ftm: use common header for FlexTimer #defines
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 12/18] include/fsl: add common FlexTimer #defines in a separate header.
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 11/18] iio: counter: Add deprecation markings for IIO Counter attributes
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 10/18] dt-bindings: counter: Adjust dt-bindings for STM32 lptimer move
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 09/18] counter: stm32-lptimer: add counter device
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 08/18] dt-bindings: counter: Document stm32 quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 07/18] counter: Add STM32 Timer quadrature encoder
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 06/18] counter: 104-quad-8: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 05/18] counter: 104-quad-8: Add Generic Counter interface support
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 04/18] iio: 104-quad-8: Update license boilerplate
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 03/18] docs: Add Generic Counter interface documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 02/18] counter: Documentation: Add Generic Counter sysfs documentation
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 01/18] counter: Introduce the Generic Counter interface
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v10 00/18] Introduce the Counter subsystem
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: counter: Add Milbeaut Updown Counter
  • From: Kanematsu, Shinji/兼松 伸次 <kanematsu.shinji@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
  • From: Kanematsu, Shinji/兼松 伸次 <kanematsu.shinji@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: counter: Add support for Milbeaut Updown Counter
  • From: Kanematsu, Shinji/兼松 伸次 <kanematsu.shinji@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
  • From: Kanematsu, Shinji/兼松 伸次 <kanematsu.shinji@xxxxxxxxxxxxx>
• Re: [PATCH v2] avia-hx711.yaml: transform DT binding to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2] bmp085.yaml: transform DT documentation of iio sensor into YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PULL] First round of new device support, cleanups and fixes for IIO in the 5.2 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] staging: iio: ad9832: add SPDX identifier
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• [PULL] First set of IIO fixes for the 5.1 cycle
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] bmp085.yaml: transform DT documentation of iio sensor into YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v2] avia-hx711.yaml: transform DT binding to YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH 2/4] staging: iio: ad9832: add SPDX identifier
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: Work on iio: stating: frequency: ad9832
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• [PATCH 4/4] staging: iio: ad9832: add devicetree documentation
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 3/4] staging: iio: ad9832: use clock framework for clock reference
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 2/4] staging: iio: ad9832: add SPDX identifier
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 1/4] staging: iio: ad9832: organize includes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH 0/4] staging: iio: ad9832: use clock framework
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Work on iio: stating: frequency: ad9832
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ads124: avoid buffer overflow
  • From: Dan Murphy <dmurphy@xxxxxx>
• Re: IIO channel type for status/error flag indicators
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ads124: avoid buffer overflow
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] ASoC: cros_ec_codec: Rename ec_response_codec_gain into ec_codec_i2s_gain
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] bmp085.yaml: transform DT documentation of iio sensor into YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] avia-hx711.yaml: transform DT binding to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH V2] iio: frequency: ad9523: Fix typo in ad9523_platform_data
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: adc: ads124: avoid buffer overflow
  • From: Vincent Stehlé <vincent.stehle@xxxxxxxxxxx>
• [PATCH] bmp085.yaml: transform DT documentation of iio sensor into YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH] avia-hx711.yaml: transform DT binding to YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH] iio: accel: kxcjk1013: Add KIOX0008 ACPI Hardware-ID
  • From: Valentin Manea <linux-iio@xxxxxx>
• Re: IIO channel type for status/error flag indicators
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [RFC 0/4] iio-input-bridge so that accelerometers which only have an iio driver can still present evdev input events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] iio: cros_ec: Add lid angle driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: core: fix a possible circular locking dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [RFC v2] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input interface
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [RFC 0/4] iio-input-bridge so that accelerometers which only have an iio driver can still present evdev input events
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: add PM support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/6] iio: gyro: add fxas21002c driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/6] iio: gyro: add core driver for fxas21002c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-dfsdm: improve sampling frequency accuracy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] staging: iio: adc: ad7280a: Remove CamelCase notation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] staging: iio: adc: ad7280a: Adding temp var to improve readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] staging: iio: adc: ad7280a: Adding temp var to improve readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/5] staging: iio: adc: ad7280a: Avoid precedence issues in macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/5] staging: iio: adc: ad7192: Converted bool to bitfield format
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] staging: iio: adc: ad7280a: Tab alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: counter: Add Milbeaut Updown Counter
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [RFC PATCH] iio: core: fix a possible circular locking dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: counter: Add support for Milbeaut Updown Counter
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] MAINTAINERS: Fix the link to ad7606 dt-bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/3] iio:temperature: Add MAX31856 thermocouple support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/3] iio:temperature:max31856:Add device tree bind info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/3] dt-bindings: iio/temperature: Add thermocouple types (and doc)
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix sleep inside atomic section when using DMA
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] devantech-srf04.yaml: transform DT binding to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2] iio: frequency: ad9523: Fix typo in ad9523_platform_data
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/2] iio: Add driver for TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add bindings for TI TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: Make possible to include driver.h first
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] mfd: cros: Update EC to use BIT() and merge
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5] iio: cros_ec: Add lid angle driver
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v5] iio: cros_ec: Add lid angle driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v5] iio: cros_ec: Add lid angle driver
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• [PATCH v5] iio: cros_ec: Add lid angle driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 3/3] mfd: cros: Update EC to use BIT() and merge
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 1/3] ASoC: cros_ec_codec: Rename ec_response_codec_gain into ec_codec_i2s_gain
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: cros_ec: Add lid angle driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: cros_ec: Add lid angle driver
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• [PATCH v4 2/2] iio: cros_ec: Add lid angle driver
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v3 2/2] dt-bindings: iio: Add bindings for TI TLA202x ADCs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: IIO channel type for status/error flag indicators
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: iio: light: add vcnl4040 devicetree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: iio: light: add vcnl4000 devicetree bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 0/4] iio-input-bridge so that accelerometers which only have an iio driver can still present evdev input events
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: bmg160: add device tree compatibility table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH AUTOSEL 5.0 027/262] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.0 253/262] staging: iio: adt7316: fix dac_bits assignment
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 018/192] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 013/123] iio: adc: fix warning in Qualcomm PM8xxx HK/XOADC driver
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix sleep inside atomic section when using DMA
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH v2] devantech-srf04.yaml: transform DT binding to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 1/1] hid: hid-sensor-custom: simplify getting .driver_data
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32: fix sleep inside atomic section when using DMA
  • From: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] hid: hid-sensor-custom: simplify getting .driver_data
  • From: Simon Horman <horms@xxxxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: counter: ftm-quaddec
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: counter: ftm-quaddec
  • From: Arnout Vandecappelle <arnout@xxxxxxx>
• [PATCH v2] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v3 2/2] dt-bindings: iio: Add bindings for TI TLA202x ADCs
  • From: Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx>
• [PATCH v3 1/2] iio: Add driver for TLA202x ADCs
  • From: Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx>
• [PATCH v1] iio: Make possible to include driver.h first
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V2] iio: frequency: ad9523: Fix typo in ad9523_platform_data
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v2] devantech-srf04.yaml: transform DT binding to YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: frequency: ad9523: Improve reported VCO frequency accuracy
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: ad9523: Fix typo in struct ad9523_platform_data
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/2] devantech-srf04.yaml: transform DT binding to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] iio: adc: stm32: fix sleep inside atomic section when using DMA
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH V2] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] devantech-srf04.txt: remove old DT documentation
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 1/2] devantech-srf04.yaml: transform DT binding to YAML
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 0/2] transform devantech-srf04.txt into yaml format
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v7 1/3] dt-bindings: iio/temperature: Add thermocouple types (and doc)
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH v7 3/3] iio:temperature: Add MAX31856 thermocouple support
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH v7 2/3] iio:temperature:max31856:Add device tree bind info
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• [PATCH v2] MAINTAINERS: Fix the link to ad7606 dt-bindings
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH v5 6/6] MAINTAINERS: add entry for fxas21002c gyro driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 5/6] ARM: dts: imx7s-warp: add fxas21002c gyroscope
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 4/6] iio: gyro: fxas21002c: add spi driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 3/6] iio: gyro: fxas21002c: add i2c driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 2/6] iio: gyro: add core driver for fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v5 0/6] iio: gyro: add fxas21002c driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Fix the link to ad7606 dt-bindings
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH] iio: imu: mpu6050: Fix FIFO layout for ICM20602
  • From: stevemo@xxxxxxxxxx
• Re: [PATCH] iio: ad_sigma_delta: Introduce prepare_channel callback
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 0/2] Add Updown Counter support for Milbeaut M10V SoC
  • From: Shinji Kanematsu <kanematsu.shinji@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: counter: Add support for Milbeaut Updown Counter
  • From: Shinji Kanematsu <kanematsu.shinji@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: counter: Add Milbeaut Updown Counter
  • From: Shinji Kanematsu <kanematsu.shinji@xxxxxxxxxxxxx>
• Bad file pattern in MAINTAINERS section 'ANALOG DEVICES INC AD7606 DRIVER'
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 1/1] hid: hid-sensor-custom: simplify getting .driver_data
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: add PM support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] iio: adc: stm32-dfsdm: improve sampling frequency accuracy
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2] iio: core: fix a possible circular locking dependency
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [RFC PATCH] iio: core: fix a possible circular locking dependency
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [RFC 0/4] iio-input-bridge so that accelerometers which only have an iio driver can still present evdev input events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gyro: bmg160: add device tree compatibility table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad5933: move out of staging
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: IIO channel type for status/error flag indicators
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: select channel when reading register
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: ad_sigma_delta: Introduce prepare_channel callback
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V2] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/6] iio: gyro: add core driver for fxas21002c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7192: Use read_avail for available attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/5] dt-bindings: iio: light: add vcnl4040 devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/5] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 4/5] staging: iio: adc: ad7280a: Adding temp var to improve readability
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v3 5/5] staging: iio: adc: ad7280a: Remove CamelCase notation
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v3 3/5] staging: iio: adc: ad7280a: Avoid precedence issues in macro
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v3 2/5] staging: iio: adc: ad7192: Converted bool to bitfield format
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v3 1/5] staging: iio: adc: ad7280a: Tab alignment
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 0/5] staging: iio: adc: Code refactoring and bool to bitfield change
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• Re: [PATCH v3 2/5] iio: light: vcnl4000 add devicetree hooks
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 3/5] dt-bindings: iio: light: add vcnl4000 devicetree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/5] iio: light: vcnl4000 add devicetree hooks
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 8/8] iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 7/8] iio: adc: stm32-dfsdm: add support for buffer modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/8] iio: adc: stm32-dfsdm: add support for scan mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/8] iio: adc: stm32-dfsdm: enable hw consumer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/8] iio: adc: stm32-dfsdm: move dma slave config to start routine
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/8] iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/8] iio: adc: stm32-dfsdm: continuous mode depends on current mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/8] iio: adc: stm32-dfsdm: make spi_master_freq more accurate
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] staging: iio: ad5933: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 1/2] staging: iio: ad5933: change attributes to match ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] staging: iio: adc: Tab alignment
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• Re: [PATCH v2 2/5] staging: iio: adc: Converted bool to bitfield format
  • From: Sicilia Cristian <sicilia.cristian@xxxxxxxxx>
• Re: Help on testing ad5933 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] staging: iio: ad7780: Add parentheses to macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] staging: iio: ad7280a: Add parentheses to macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: core: fix a possible circular locking dependency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ssp_sensors: avoid uninitialized variable usage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] dt-bindings: power: supply: Add docs for Ingenic JZ47xx SoCs battery.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: inkern: Convert iio_read_avail_channel_raw into a wrapper
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: inkern: API for reading available iio channel attribute values
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: imu: adis16400: move adis16400.h into adis16400.c
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: adis16400: move burst logic to ADIS lib
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: adis: generalize burst mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: adis16400: move trigger handler into adis16400_core
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/5] staging: iio: adc: Remove CamelCase notation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/5] staging: iio: adc: Adding temp var to improve readability
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/5] staging: iio: adc: Avoid precedence issues in macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/5] staging: iio: adc: Tab alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/5] staging: iio: adc: Converted bool to bitfield format
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: st_accel: remove unnecessary comparison of unsigned integer with < 0
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 4/4] MAINTAINERS: add maintainer for maxbotix ultrasonic driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/4] mb1232.c: add distance iio sensor with i2c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/4] dt-bindings: Add vendor prefix for MaxBotix
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hmc5843: fix potential NULL pointer dereferences
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 01/11] staging: iio: ad7780: add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: hmc5843: fix potential NULL pointer dereferences
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: Add driver for TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/5] *** SUBJECT HERE ***
  • From: Matt Ranostay <matt.ranostay@xxxxxxxxxxxx>
• [PATCH v2 4/5] staging: iio: adc: Adding temp var to improve readability
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 3/5] staging: iio: adc: Avoid precedence issues in macro
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 1/5] staging: iio: adc: Tab alignment
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 5/5] staging: iio: adc: Remove CamelCase notation
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 2/5] staging: iio: adc: Converted bool to bitfield format
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 0/5] staging: iio: adc: Code refactoring and bool to bitfield change
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH v2 4/4] power: supply: add Ingenic JZ47xx battery driver.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 2/4] iio: inkern: Convert iio_read_avail_channel_raw into a wrapper
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 3/4] dt-bindings: power: supply: Add docs for Ingenic JZ47xx SoCs battery.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH v2 1/4] iio: inkern: API for reading available iio channel attribute values
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 1/5] staging: iio: adc: Tab alignment
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 3/5] staging: iio: adc: Avoid precedence issues in macro
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 5/5] staging: iio: adc: Remove CamelCase notation
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 2/5] staging: iio: adc: Converted bool to bitfield format
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 4/5] staging: iio: adc: Adding temp var to improve readability
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 0/5] *** SUBJECT HERE ***
  • From: Cristian Sicilia <sicilia.cristian@xxxxxxxxx>
• [PATCH 5/5] iio: imu: adis16400: move adis16400.h into adis16400.c
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 4/5] iio: imu: adis16400: rename adis16400_core.c -> adi16400.c
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 3/5] iio: imu: adis16400: move burst logic to ADIS lib
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 2/5] iio: imu: adis: generalize burst mode support
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 1/5] iio: imu: adis16400: move trigger handler into adis16400_core
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: Help on testing ad5933 driver
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH] iio: stmpe-adc: avoid harmless clang warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] iio: ssp_sensors: avoid uninitialized variable usage
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] iio: stmpe-adc: avoid harmless clang warning
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH] iio: ssp_sensors: avoid uninitialized variable usage
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] iio: stmpe-adc: avoid harmless clang warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC PATCH] iio: core: fix a possible circular locking dependency
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• [PATCH v2 0/2] Add support for the TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: Help on testing ad5933 driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Gregory CLEMENT <gregory.clement@xxxxxxxxxxx>
• Re: [PATCH v2] iio: Add driver for TLA202x ADCs
  • From: Ibtsam Ul-Haq <ibtsam.haq.0x01@xxxxxxxxx>
• [PATCH v2 2/2] staging: iio: ad7780: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH v2 1/2] staging: iio: ad7280a: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH v2 0/2] staging: iio: adc: Fix code formatting issues
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: ad7280a: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: ad7780: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• Help on testing ad5933 driver
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v5 2/2] staging: iio: ad5933: move out of staging
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v5 1/2] staging: iio: ad5933: change attributes to match ABI
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v5 0/2] staging: iio: ad5933: move out of staging
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 3/8] iio: adc: stm32-dfsdm: move dma enable from start_conv() to start_dma()
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 5/8] iio: adc: stm32-dfsdm: enable hw consumer
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/8] iio: adc: stm32-dfsdm: make spi_master_freq more accurate
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/8] iio: adc: stm32-dfsdm: continuous mode depends on current mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 7/8] iio: adc: stm32-dfsdm: add support for buffer modes
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 6/8] iio: adc: stm32-dfsdm: add support for scan mode
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 8/8] iio: adc: stm32-dfsdm: claim direct mode for raw read and settings
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/8] iio: adc: stm32-dfsdm: add buffer modes
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 4/8] iio: adc: stm32-dfsdm: move dma slave config to start routine
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v3 0/5] Add a VCNL4040 light and proximity driver
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v3 2/5] iio: light: vcnl4000 add devicetree hooks
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v3 3/5] dt-bindings: iio: light: add vcnl4000 devicetree bindings
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v3 4/5] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v3 5/5] dt-bindings: iio: light: add vcnl4040 devicetree bindings
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v3 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• Re: [PATCH v2 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: adc: stm32-dfsdm: add support for buffer modes
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/8] iio: adc: stm32-dfsdm: make spi_master_freq more accurate
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v2 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: Angus Ainslie <angus@xxxxxxxx>
• Re: [PATCH v2 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: Tomas Novotny <tomas@xxxxxxxxxx>
• IIO channel type for status/error flag indicators
  • From: "Popa, Stefan Serban" <StefanSerban.Popa@xxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [PATCH 3/3] staging: iio: ad7780: Add parentheses to macros
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 2/3] staging: iio: ad7280a: Add parentheses to macros
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 1/1] hid: hid-sensor-custom: simplify getting .driver_data
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] staging: iio: adc: ad7192: Use read_avail for available attributes
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• Re: [PATCH v3 00/30] IIO-based thermal sensor driver for Allwinner H3 and A83T SoC
  • From: Måns Rullgård <mans@xxxxxxxxx>
• [PATCH V2] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH v4 6/6] MAINTAINERS: add entry for fxas21002c gyro driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 5/6] ARM: dts: imx7s-warp: add fxas21002c gyroscope
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 4/6] iio: gyro: fxas21002c: add spi driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 3/6] iio: gyro: fxas21002c: add i2c driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 2/6] iio: gyro: add core driver for fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH v4 0/6] iio: gyro: add fxas21002c driver
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: Properly handle SPI bus locking vs CS assertion
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: select channel when reading register
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH] iio: ad_sigma_delta: Introduce prepare_channel callback
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: ad7192: Fix style issue
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [RFC 1/4] iio: input-bridge: optionally bridge iio acceleometers to create a /dev/input
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 4/4] iio: input-bridge: make the iio-input-bridge driver called by iio-core
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 3/4] iio: input-bridge: add IIO_INPUT_BRIDGE kernel config option
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 2/4] iio: input-bridge: add iio-input-bridge to Makefile
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [RFC 0/4] iio-input-bridge so that accelerometers which only have an iio driver can still present evdev input events
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: dts: exynos: Use ADC for Exynos4x12 on Exyno4412
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio: st_accel: remove unnecessary comparison of unsigned integer with < 0
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• [PATCH 1/2] iio: gyro: bmg160: add device tree compatibility table
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: add Bosch BMG160 gyroscope sensor
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH 0/2] iio: gyro: bmg160 add device tree support
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v1] iio: adc: intel_mrfld_adc: Add Basin Cove ADC driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: [GSoC] AD7292 driver project
  • From: Karuna Grewal <karunagrewal98@xxxxxxxxx>
• Re: [GSoC] AD7292 driver project
  • From: Karuna Grewal <karunagrewal98@xxxxxxxxx>
• Re: [GSoC] AD7292 driver project
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• Re: [PATCH v3 2/6] iio: gyro: add core driver for fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• Re: [PATCH v3 1/6] iio: gyro: add DT bindings to fxas21002c
  • From: Rui Miguel Silva <rui.silva@xxxxxxxxxx>
• Re: [PATCH 1/3] staging: iio: ad7192: Fix style issue
  • From: Phil Reid <preid@xxxxxxxxxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• [PATCH 3/3] staging: iio: ad7780: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH 2/3] staging: iio: ad7280a: Add parentheses to macros
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH 1/3] staging: iio: ad7192: Fix style issue
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH 0/3] Code formatting clean up
  • From: Vladimir Petrigo <vladimir.petrigo@xxxxxxxxx>
• [PATCH v3 4/4] MAINTAINERS: add maintainer for maxbotix ultrasonic driver
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 3/4] mb1232.c: add distance iio sensor with i2c
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: maxbotix,mb1232: Add MaxBotix i2c ultrasonic rangers
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 1/4] dt-bindings: Add vendor prefix for MaxBotix
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH v3 0/4] add MaxBotix I2CXL ultrasonic iio driver
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• Re: [GSoC] AD7292 driver project
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: "Pandruvada, Srinivas" <srinivas.pandruvada@xxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: xilinx: prevent touching unclocked h/w on remove
  • From: Sven Van Asbroeck <thesven73@xxxxxxxxx>
• [PATCH v2 0/5] Add a VCNL4040 light and proximity driver
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v2 1/5] iio: light: vcnl4000 use word writes instead of byte writes
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v2 2/5] iio: light: vcnl4000 add devicetree hooks
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v2 3/5] dt-bindings: iio: light: add vcnl4000 devicetree bindings
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v2 4/5] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH v2 5/5] dt-bindings: iio: light: add vcnl4040 devicetree bindings
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• Re: [PATCH v3 2/2] iio/chemical/bme680: Fix SPI read interface
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• [PATCH v2] iio: hmc5843: fix potential NULL pointer dereferences
  • From: Kangjie Lu <kjlu@xxxxxxx>
• Re: [GSoC] AD7292 driver project
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 7/7] staging: iio: ad5933: move out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 6/7] staging: iio: ad5933: change attributes to match ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/11] staging: iio: ad7780: moving ad7780 out of staging
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• Re: [PATCH v4 6/7] staging: iio: ad5933: change attributes to match ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 5/7] staging: iio: ad5933: add ABI documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/7] staging: iio: ad5933: change help rule message
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/7] staging: iio: ad5933: add SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/7] staging: iio: ad5933: organize includes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/7] staging: iio: ad5933: change multi-line comment style
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 11/11] staging: iio: ad7780: add device tree binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/11] staging: iio: ad7780: moving ad7780 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/11] staging: iio: ad7780: add new copyright holder
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 08/11] staging: iio: ad7780: add SPDX identifier
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 07/11] staging: iio: ad7780: move regulator to after GPIO init
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 06/11] staging:iio:ad7780: add chip ID values and mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 05/11] staging: iio: ad7780: set pattern values and masks directly
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/11] staging: iio: ad7780: add filter reading to ad778x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 03/11] staging: iio: ad7780: add gain reading to ad778x
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/11] staging: iio: ad7780: add missing switch default case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 01/11] staging: iio: ad7780: add gain & filter gpio support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] dt-bindings: iio: adc: lpc32xx-adc: Document vref-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: lpc32xx: Add scale feature
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: lpc32xx: Cleanup headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: lpc32xx: Sort headers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/4] Adding scale support to the lpc32xx ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: light: Document the VCNL4xx0 device tree bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: adc: Add bindings for TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver for the TI ADS8344 A/DC chips
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7192: Convert platform data to DT properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsox device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7192: Report error directly in ad7192_setup
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Use DT clock binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DSOX
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] staging: iio: adc: ad7192: Report error directly in ad7192_setup
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] staging: iio: adc: ad7192: Fix identation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: fix indentation issue, remove extra tab
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pms7003: sleect IIO_TRIGGERED_BUFFER
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: Testing ad9833 with Diolan DLN2 adapter
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: gyro: add core driver for fxas21002c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio:potentiostat:lmp91000: invert if statement
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Switch to SPDX identifier.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Add kernel-doc for cros_ec_sensors_read_lpc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Drop unnecessary include files
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: cros_ec: Fix the maths for gyro scale calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: pressure: bmp280: BMP280 calibration to entropy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: iio: imu: adis16480: Document external clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: imu: adis16480: Add support for external clock
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: mcp4725: add missing powerdown bits in store eeprom
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adc: ad7192: Add spaces around minus operator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: adc: xilinx: prevent touching unclocked h/w on remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: xilinx: fix potential use-after-free on probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: xilinx: fix potential use-after-free on remove
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hmc: fix a potential NULL pointer dereference
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: mcp4725: add missing powerdown bits in store eeprom
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: add support to LIS2DE12
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 7/7] staging: iio: ad5933: move out of staging
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 6/7] staging: iio: ad5933: change attributes to match ABI
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 5/7] staging: iio: ad5933: add ABI documentation
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 4/7] staging: iio: ad5933: change help rule message
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 3/7] staging: iio: ad5933: add SPDX identifier
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v4 2/7] staging: iio: ad5933: organize includes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 2/2] iio: accel: add support to LIS2DE12
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 1/7] staging: iio: ad5933: change multi-line comment style
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: accel: add LIS2DE12 sensor device binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/7] staging: iio: ad5933: move out of staging
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH] iio:dac:ad5064 mlock cleanup - move to a local lock.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: Add driver for TLA202x ADCs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/7] dt-bindings: counter: ftm-quaddec
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: adc: stm32-dfsdm: add support for buffer modes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio/chemical/bme680: Fix SPI read interface
  • From: Mike Looijmans <mike.looijmans@xxxxxxxx>
• [GSoC] AD7292 driver project
  • From: Karuna Grewal <karunagrewal98@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio/chemical/bme680: Fix SPI read interface
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Debugging 3D sensor on Lenovo YOGA 700-11ISK
  • From: Alexey Kardashevskiy <aik@xxxxxxxxx>
• [PATCH v5 11/11] staging: iio: ad7780: add device tree binding
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 10/11] staging: iio: ad7780: moving ad7780 out of staging
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 09/11] staging: iio: ad7780: add new copyright holder
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 08/11] staging: iio: ad7780: add SPDX identifier
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 07/11] staging: iio: ad7780: move regulator to after GPIO init
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 06/11] staging:iio:ad7780: add chip ID values and mask
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 05/11] staging: iio: ad7780: set pattern values and masks directly
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 04/11] staging: iio: ad7780: add filter reading to ad778x
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 03/11] staging: iio: ad7780: add gain reading to ad778x
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 02/11] staging: iio: ad7780: add missing switch default case
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 01/11] staging: iio: ad7780: add gain & filter gpio support
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH v5 00/11] staging: iio: ad7780: move out of staging
  • From: Renato Lui Geh <renatogeh@xxxxxxxxx>
• [PATCH 0/2] Add a VCNL4040 light and proximity driver
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>
• [PATCH 1/2] iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor
  • From: "Angus Ainslie (Purism)" <angus@xxxxxxxx>