[PATCH v4 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The LSM9DS1's accelerometer / gyroscope unit and it's magnetometer (separately
supported in iio/magnetometer/st_magn*) are located on a separate i2c addresses
on the bus.

For the datasheet, see https://www.st.com/resource/en/datasheet/lsm9ds1.pdf

Treat it just like the LSM6* devices and, despite it's name, hook it up
to the st_lsm6dsx driver, using it's basic functionality.

accelerometer and gyroscope are not independently clocked. It runs at the gyro
frequencies if both are enabled, see chapter 7.12 of the datasheet.
We could have handled this as a single IIO device but we have split
it up to be more consistent with the other more flexible devices.

Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 drivers/iio/imu/st_lsm6dsx/Kconfig           |  2 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h      |  2 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 87 ++++++++++++++++++++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c  |  5 ++
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c  |  5 ++
 5 files changed, 100 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 939058b27746..77aa0e77212d 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -12,7 +12,7 @@ config IIO_ST_LSM6DSX
 	  Say yes here to build support for STMicroelectronics LSM6DSx imu
 	  sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
 	  ism330dlc, lsm6dso, lsm6dsox, asm330lhh, lsm6dsr, lsm6ds3tr-c,
-	  ism330dhcx
+	  ism330dhcx and the accelerometer/gyroscope of lsm9ds1.
 
 	  To compile this driver as a module, choose M here: the module
 	  will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index c8f333902eb7..d03b5a2d8549 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -24,6 +24,7 @@
 #define ST_LSM6DSR_DEV_NAME	"lsm6dsr"
 #define ST_LSM6DS3TRC_DEV_NAME	"lsm6ds3tr-c"
 #define ST_ISM330DHCX_DEV_NAME	"ism330dhcx"
+#define ST_LSM9DS1_DEV_NAME	"lsm9ds1"
 
 enum st_lsm6dsx_hw_id {
 	ST_LSM6DS3_ID,
@@ -37,6 +38,7 @@ enum st_lsm6dsx_hw_id {
 	ST_LSM6DSR_ID,
 	ST_LSM6DS3TRC_ID,
 	ST_ISM330DHCX_ID,
+	ST_LSM9DS1_ID,
 	ST_LSM6DSX_MAX_ID,
 };
 
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 56e1c5262a2c..f038bb06f635 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -10,6 +10,8 @@
  * +-125/+-245/+-500/+-1000/+-2000 dps
  * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer
  * allowing dynamic batching of sensor data.
+ * LSM9DSx series is similar but includes an additional magnetometer, handled
+ * by a different driver.
  *
  * Supported sensors:
  * - LSM6DS3:
@@ -30,6 +32,13 @@
  *   - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
  *   - FIFO size: 3KB
  *
+ * - LSM9DS1:
+ *   - Accelerometer supported ODR [Hz]: 10, 50, 119, 238, 476, 952
+ *   - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
+ *   - Gyroscope supported ODR [Hz]: 15, 60, 119, 238, 476, 952
+ *   - Gyroscope supported full-scale [dps]: +-245/+-500/+-2000
+ *   - FIFO size: 32
+ *
  * Copyright 2016 STMicroelectronics Inc.
  *
  * Lorenzo Bianconi <lorenzo.bianconi@xxxxxx>
@@ -70,7 +79,85 @@ static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3),
 };
 
+static const struct iio_chan_spec st_lsm9dsx_gyro_channels[] = {
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x18, IIO_MOD_X, 0),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1a, IIO_MOD_Y, 1),
+	ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, 0x1c, IIO_MOD_Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
 static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
+	{
+		.wai = 0x68,
+		.int1_addr = 0x0c,
+		.int2_addr = 0x0d,
+		.reset_addr = 0x22,
+		.max_fifo_size = 32,
+		.id = {
+			{
+				.hw_id = ST_LSM9DS1_ID,
+				.name = ST_LSM9DS1_DEV_NAME,
+			},
+		},
+		.channels = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.chan = st_lsm6dsx_acc_channels,
+				.len = ARRAY_SIZE(st_lsm6dsx_acc_channels),
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.chan = st_lsm9dsx_gyro_channels,
+				.len = ARRAY_SIZE(st_lsm9dsx_gyro_channels),
+			},
+		},
+		.odr_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  10, 0x01 },
+				.odr_avl[1] = {  50, 0x02 },
+				.odr_avl[2] = { 119, 0x03 },
+				.odr_avl[3] = { 238, 0x04 },
+				.odr_avl[4] = { 476, 0x05 },
+				.odr_avl[5] = { 952, 0x06 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(7, 5),
+				},
+				.odr_avl[0] = {  15, 0x01 },
+				.odr_avl[1] = {  60, 0x02 },
+				.odr_avl[2] = { 119, 0x03 },
+				.odr_avl[3] = { 238, 0x04 },
+				.odr_avl[4] = { 476, 0x05 },
+				.odr_avl[5] = { 952, 0x06 },
+			},
+		},
+		.fs_table = {
+			[ST_LSM6DSX_ID_ACC] = {
+				.reg = {
+					.addr = 0x20,
+					.mask = GENMASK(4, 3),
+				},
+				.fs_avl[0] = {  599, 0x0 },
+				.fs_avl[1] = { 1197, 0x2 },
+				.fs_avl[2] = { 2394, 0x3 },
+				.fs_avl[3] = { 4788, 0x1 },
+			},
+			[ST_LSM6DSX_ID_GYRO] = {
+				.reg = {
+					.addr = 0x10,
+					.mask = GENMASK(4, 3),
+				},
+				.fs_avl[0] = { IIO_DEGREE_TO_RAD(245), 0x0 },
+				.fs_avl[1] = { IIO_DEGREE_TO_RAD(500), 0x1 },
+				.fs_avl[2] = { IIO_DEGREE_TO_RAD(0), 0x2 },
+				.fs_avl[3] = { IIO_DEGREE_TO_RAD(2000), 0x3 },
+			},
+		},
+	},
 	{
 		.wai = 0x69,
 		.int1_addr = 0x0d,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 15c6aa5b6caa..2f1b30ff083b 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
 		.compatible = "st,ism330dhcx",
 		.data = (void *)ST_ISM330DHCX_ID,
 	},
+	{
+		.compatible = "st,lsm9ds1",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -99,6 +103,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index a8430ee11310..421ce704f346 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -83,6 +83,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
 		.compatible = "st,ism330dhcx",
 		.data = (void *)ST_ISM330DHCX_ID,
 	},
+	{
+		.compatible = "st,lsm9ds1",
+		.data = (void *)ST_LSM9DS1_ID,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -99,6 +103,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
 	{ ST_LSM6DSR_DEV_NAME, ST_LSM6DSR_ID },
 	{ ST_LSM6DS3TRC_DEV_NAME, ST_LSM6DS3TRC_ID },
 	{ ST_ISM330DHCX_DEV_NAME, ST_ISM330DHCX_ID },
+	{ ST_LSM9DS1_DEV_NAME, ST_LSM9DS1_ID },
 	{},
 };
 MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
-- 
2.20.1




[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux