This patch disables the adxl372 interrupts at setup. The interrupts should be enabled together with the iio buffer. Not doing this, might cause an unwanted interrupt to trigger without being able to properly clear it. Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx> --- drivers/iio/accel/adxl372.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/iio/accel/adxl372.c b/drivers/iio/accel/adxl372.c index 72d3f45..77651f4 100644 --- a/drivers/iio/accel/adxl372.c +++ b/drivers/iio/accel/adxl372.c @@ -609,6 +609,10 @@ static int adxl372_setup(struct adxl372_state *st) if (ret < 0) return ret; + ret = adxl372_set_interrupts(st, 0, 0); + if (ret < 0) + return ret; + /* Set the mode of operation to full bandwidth measurement mode */ return adxl372_set_op_mode(st, ADXL372_FULL_BW_MEASUREMENT); } -- 2.7.4
