Hi Jonathan, we could add a check on the DT for i2c-gate node. We also need to add a check on the ACPI configuration used by the ASUS T100TA device. In this case, do you think it is still valuable to have a Kconfig option? (this can still help to reduce driver footprint) Thanks. JB From: Jonathan Cameron <jic23@xxxxxxxxxx> Sent: Sunday, September 8, 2019 13:42 To: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx> Cc: linux-iio@xxxxxxxxxxxxxxx <linux-iio@xxxxxxxxxxxxxxx> Subject: Re: [PATCH 0/8] add magnetometer support for MPU925x CAUTION: This email originated from outside of the organization. Please make sure the sender is who they say they are and do not click links or open attachments unless you recognize the sender and know the content is safe. On Thu, 29 Aug 2019 15:18:33 +0000 Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx> wrote: > This serie of patches adds support of magnetometer inside MPU925x chips. > It is using the MPU i2c master to drive the integrated magnetometer and > read data into the MPU FIFO. > > Beware that this is disabling access to the i2c auxiliary bus. Since this > can break existing setup, it is an optional feature requiring to enable > the corresponding Kconfig option. That's not great... People will fail to set that correctly for their setup even if there is a 'correct' setting. So we need more information to risk that breakage + discussions of ways to avoid it. Can we for example check if the auxiliary bus is in use? (DT binding for example - check for the i2c-gate node?) Jonathan > > Jean-Baptiste Maneyrol (8): > iio: imu: inv_mpu6050: disable i2c mux for 925x under Kconfig > iio: imu: inv_mpu6050: add header include protection macro > iio: imu: inv_mpu6050: add defines for supporting 9-axis chips > iio: imu: inv_mpu6050: fix objects syntax in Makefile > iio: imu: inv_mpu6050: helpers for using i2c master on auxiliary bus > iio: imu: inv_mpu6050: add magnetometer implementation for MPU925x > iio: imu: inv_mpu6050: add magnetometer support inside mpu driver > iio: imu: inv_mpu6050: add fifo support for magnetometer data > > drivers/iio/imu/inv_mpu6050/Kconfig | 9 + > drivers/iio/imu/inv_mpu6050/Makefile | 8 +- > .../iio/imu/inv_mpu6050/inv_mpu9250_magn.c | 239 ++++++++++++++++++ > .../iio/imu/inv_mpu6050/inv_mpu9250_magn.h | 27 ++ > drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c | 191 ++++++++++++++ > drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h | 46 ++++ > drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 141 ++++++++++- > drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 5 + > drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 79 +++++- > drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c | 120 +++++++++ > drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h | 107 ++++++++ > drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 14 +- > drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 90 ++++++- > 13 files changed, 1055 insertions(+), 21 deletions(-) > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu9250_magn.c > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu9250_magn.h > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.c > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_aux.h > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.c > create mode 100644 drivers/iio/imu/inv_mpu6050/inv_mpu_magn.h >
