Linux IIO Development

• Thread Index

• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH v2 02/10] iio: document bindings for mounting matrices
  • From: "H. Nikolaus Schaller" <hns@xxxxxxxxxxxxx>
• [PATCH v2] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 02/10] iio: document bindings for mounting matrices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/3][V4] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/3][V4] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/3][V4] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 0/3] st_lsm6dsx: move {odr,fs}_table in
  • From: Martin Kepplinger <martink@xxxxxxxxx>
• Re: [PATCH] hwmon: Remove ads1015 driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] hwmon: Remove ads1015 driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2 11/11] iio: make st_sensors drivers use regmap
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• RE: [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
• [PATCH 3/3] iio: pressure: hp03: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] iio: light: veml6070: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] iio: convert subsystem to i2c_new_dummy_device()
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] iio: light: cm36651: convert to i2c_new_dummy_device
  • From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 3/4] ARM: dts: am33xx: Add nodes for eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 2/4] counter: new TI eQEP driver
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: am335x-boneblue: Enable eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: counter: new bindings for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• [PATCH 0/4] new driver for TI eQEP
  • From: David Lechner <david@xxxxxxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• general protection fault in make_kuid
  • From: syzbot <syzbot+7d6a57304857423318a5@xxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/4][V3] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4][V3] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/4][V3] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/4][V3] iio: imu: adis: Add support for SPI transfer cs_change_delay
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4][V3] spi: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 04/22] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 00/22] ReST conversion of text files without .txt extension
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: problem with driver with driver name and version
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Fix a typo
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: magnetometer: mmc35240: Fix a typo in the name of a constant
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• [PATCH] iio: potentiometer: add a driver for Maxim 5432-5435
  • From: Martin Kaiser <martin@xxxxxxxxx>
• Re: [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/11] iio: make st_sensors drivers use regmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/11] iio:pressure: introduce st_press_get_settings() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/11] iio:gyro: introduce st_gyro_get_settings() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/11] iio:magn: introduce st_magn_get_settings() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/11] iio:accel: device settings are set immediately during probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/11] iio:gyro: device settings are set immediately during probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/11] iio:magn: device settings are set immediately during probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/11] iio:accel: introduce st_accel_get_settings() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/11] iio:common:st_sensors: add st_sensors_get_settings_index() helper function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Remove replacing error code with -EIO
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec: Add calibscale for 3d MEMS
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.4 18/35] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.14 19/60] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: apds9960: Fix a typo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Fix a typo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/14] iio: SPDX headers for core + non device driver parts.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: sca3000: Fix a typo
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] iio: light: apds9960: Fix a typo
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v1 2/2] auxadc: mediatek: support efuse calibration in auxadc driver
  • From: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>
• Re: [PATCH 4/4][V2] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• problem with driver with driver name and version
  • From: Kartik Kulkarni <kartik.koolks@xxxxxxxxx>
• RE: [PATCH v6 1/2] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v6 1/2] i3c: move i3c_device_match_id to device.c and export it
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v6 1/2] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v6 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v6 0/2] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] i3c: move i3c_device_match_id to device.c and export it
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• [PATCH v5 0/2] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v5 1/2] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH AUTOSEL 5.2 003/171] iio: adc: stm32-dfsdm: manage the get_irq error case
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 065/171] iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 064/171] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 084/171] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 090/171] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 002/141] iio: adc: stm32-dfsdm: manage the get_irq error case
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 003/141] iio: adc: stm32-dfsdm: missing error case during probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 048/141] iio: adxl372: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 047/141] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 068/141] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 064/141] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 032/101] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 043/101] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 047/101] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 30/60] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 19/60] iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 18/35] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.4 17/35] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 23/45] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.9 20/45] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 27/60] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 003/101] iio: adc: stm32-dfsdm: missing error case during probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 002/101] iio: adc: stm32-dfsdm: manage the get_irq error case
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.2 004/171] iio: adc: stm32-dfsdm: missing error case during probe
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] iio: cros_ec: Add calibscale for 3d MEMS
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 11/11] iio: make st_sensors drivers use regmap
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 10/11] iio: move 3-wire spi initialization to st_sensors_spi
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 09/11] iio:pressure: device settings are set immediately during probe
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 08/11] iio:magn: device settings are set immediately during probe
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 07/11] iio:gyro: device settings are set immediately during probe
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 06/11] iio:accel: device settings are set immediately during probe
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 05/11] iio:pressure: introduce st_press_get_settings() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 04/11] iio:magn: introduce st_magn_get_settings() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 03/11] iio:gyro: introduce st_gyro_get_settings() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 02/11] iio:accel: introduce st_accel_get_settings() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 01/11] iio:common:st_sensors: add st_sensors_get_settings_index() helper function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH v2 00/11] iio:st_sensors: make use of regmap API
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH] iio: cros_ec: Remove replacing error code with -EIO
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] [v2] iio: adc: gyroadc: fix uninitialized return code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH] [v2] iio: adc: gyroadc: fix uninitialized return code
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/14] iio: SPDX headers for core + non device driver parts.
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v1 2/2] auxadc: mediatek: support efuse calibration in auxadc driver
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH v1 1/2] arm64: dts: mt8183: auxadc: add efuse information in device tree
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH v1 0/2] AUXADC: support efuse calibration on MT818
  • From: Zhiyong Tao <zhiyong.tao@xxxxxxxxxxxx>
• [PATCH 4/5] iio: adc: ad7606: Add support for software mode for ad7616
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 3/5] iio: adc: ad7606: Allow reconfigration after reset
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/5] iio: adc: ad7606: Move spi dependent features to spi file
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 1/5] iio: adc: ad7606: Move common channel definition to header
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• Re: [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2
  • From: Himanshu Jha <himanshujha199640@xxxxxxxxx>
• Re: [PATCH v4 13/15] docs: ABI: testing: make the files compatible with ReST output
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 00/14] iio: SPDX headers for core + non device driver parts.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH 3/4][V2] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 2/4][V2] iio: imu: adis: Add support for SPI transfer cs_change_delay_usecs
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/4][V2] drivers: spi: core: Add optional delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/4][V2] dt-bindings: iio: imu: add bindings for ADIS16460
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 0/4][V2] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: ad7124: Fix dtc warnings in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCHv2 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCHv2 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/3] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCHv2 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCHv2 1/3] iio: imu: st_lsm6sdx: move register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v5 1/1] iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v5 0/1] Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v6 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 4/6] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: inline acc/gyro output regs
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 5/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH v2 6/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6sdx: move some register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH 3/3] iio: imu: st_lsm6dsx: inline acc/gyro output regs
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• Re: [PATCH v2 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 4/4] iio: cros_ec_accel_legacy: Add support for veyron-minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 2/4] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v6 0/4] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 2/4] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 4/4] iio: cros_ec_accel_legacy: Add support for veyron-minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v5 0/4] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 3/3] iio: imu: st_lsm6dsx: inline acc/gyro output regs
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 2/3] iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/3] iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/3] st_lsm6dsx: move {odr,fs}_table in
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: imu: st_lsm6sdx: move some register definitions to sensor_settings struct
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Benson Leung <bleung@xxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• Re: [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] iio: cros_ec_accel_legacy: Always release lock when returning from _read()
  • From: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
• [PATCH 2/3] iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH 1/3] iio: imu: st_lsm6sdx: move some register definitions to sensor_settings struct
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH 3/3] dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  • From: Martin Kepplinger <martin.kepplinger@xxxxxxx>
• [PATCH v2 6/6] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 4/6] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 2/6] iio: imu: st_lsm6dsx: save drdy_pin in device struct
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 1/6] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 5/6] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH v2 3/6] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PULL] stream_open bits for Linux 5.3
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH] iio: imu: st_lsm6dsx: flip irq return logic
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: stm32: add syscfg to ADC on stm32mp157c
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PULL] stream_open bits for Linux 5.3
  • From: pr-tracker-bot@xxxxxxxxxx
• Re: [PATCH v4 1/1] iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: imu: mpu6050: add missing available scan masks
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 4/4] iio: cros_ec_accel_legacy: Add support for veyron-minnie
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/4] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] staging: iio: ad7192: create of_device_id array
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] Documentation: ABI: iio: Add missing newline at end of file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] hwmon: Remove ads1015 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: stm32: add syscfg to ADC on stm32mp157c
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add analog switches supply control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: ad7606: Add support for software mode for ad7616
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: Benjamin GAIGNARD <benjamin.gaignard@xxxxxx>
• Re: [PATCH 3/3] iio: light: stk3310: Add device tree support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add vendor prefix for sensortek
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: light: add stk33xx
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: FXOS8700 Accelerometer/Magnetometer Support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] IIO: Ingenic JZ47xx: Set clock divider on probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/14] iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 02/14] iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/14] iio: adc: sc27xx: Introduce local variable 'struct device *dev'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Jacopo Mondi <jacopo@xxxxxxxxxx>
• [PULL] stream_open bits for Linux 5.3
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Peter Meerwald-Stadler <pmeerw@xxxxxxxxxx>
• Re: [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add entry for plantower pms7003 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: chemical: pms7003: convert bindings to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: iio: position: Add docs pat9125
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3][V3] lib: fix __sysfs_match_string() helper when n != -1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: Add pixart vendor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: position: Add docs pat9125
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add PAT9125 optical tracker driver
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i3c: move i3c_device_match_id to device.c and export it
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• RE: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• RE: [PATCH v4 2/3] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• RE: [PATCH v4 1/3] regmap: add i3c bus support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] i3c: move i3c_device_match_id to device.c and export it
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] regmap: add i3c bus support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add ST lsm6dso i3c support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
• Re: [PATCH v4 0/3] Add PAT9125 optical tracker driver
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
• [PATCH v4 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v4 1/3] regmap: add i3c bus support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v4 2/3] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v4 1/3] dt-bindings: Add pixart vendor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 0/3] Add PAT9125 optical tracker driver
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: iio: position: Add docs pat9125
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: David Miller <davem@xxxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Alexandre Mergnat <amergnat@xxxxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: add driver for PCT2075 temperature sensor
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
• Re: [PATCH] IIO: stm32: Remove quadrature related functions from trigger driver
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH 1/1] counter: cros_ec: Add synchronization sensor
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• RE: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• RE: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: chemical: pms7003: convert bindings to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: chemical: pms7003: convert bindings to yaml
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: add entry for plantower pms7003 driver
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 0/2] iio: chemical: pms7003: convert bindings to yaml
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v3 1/3] regmap: add i3c bus support
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v3 3/3] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v3 1/3] regmap: add i3c bus support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v3 2/3] i3c: move i3c_device_match_id to device.c and export it
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• [PATCH v3 0/3] Add ST lsm6dso i3c support
  • From: Vitor Soares <Vitor.Soares@xxxxxxxxxxxx>
• Re: [PATCH 2/4] dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
• [PATCH 04/12] iio: adc: max9611: Fix misuse of GENMASK macro
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH 00/12] treewide: Fix GENMASK misuses
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/1] counter: cros_ec: Add synchronization sensor
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH 0/1] counter: cros_ec: Add sync sensor driver
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v2] docs: driver-api: generic-counter: fix file path to ABI doc
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v2] docs: driver-api: generic-counter: fix file path to ABI doc
  • From: Jonathan Corbet <corbet@xxxxxxx>
• [PATCH v4 1/1] iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v4 0/1] Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v2] docs: driver-api: generic-counter: fix file path to ABI doc
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• Re: [PATCH v3 8/8] docs: iio: add precision about sampling_frequency_available
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v2] docs: driver-api: generic-counter: fix file path to ABI doc
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH] docs: driver-api: generic-counter: fix file path to ABI doc
  • From: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
• [PATCH 09/14] iio: imu: mpu6050: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 02/14] iio: adc: sc27xx: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• [PATCH 01/14] iio: adc: sc27xx: Introduce local variable 'struct device *dev'
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: Patch ping?
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Patch ping?
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: add driver for PCT2075 temperature sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: add driver for PCT2075 temperature sensor
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [Patch v2 05/10] iio: using dev_get_drvdata directly
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: iio: light: add stk33xx
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 3/3][V3] iio: Handle enumerated properties with gaps
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH] iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH v2] IIO: Ingenic JZ47xx: Set clock divider on probe
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Marek Vasut <marek.vasut@xxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: gyroadc: fix uninitialized return code
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [Patch v2 05/10] iio: using dev_get_drvdata directly
  • From: Fuqian Huang <huangfq.daxian@xxxxxxxxx>
• Re: LSM9DS1 Accel/Gyro Support?
  • From: Martin Kelly <martin@xxxxxxxxxxxxxxxx>
• LSM9DS1 Accel/Gyro Support?
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• FXOS8700 Accelerometer/Magnetometer Support
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• FXOS8700 Accelerometer/Magnetometer Support
  • From: Bobby Jones <rjones@xxxxxxxxxxxxx>
• [PATCH 3/3] iio: light: stk3310: Add device tree support
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: iio: light: add stk33xx
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: Add vendor prefix for sensortek
  • From: Luca Weiss <luca@xxxxxxxxx>
• [PATCH 1/5] iio: adc: ad7606: Move common channel definition to header
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 3/5] iio: adc: ad7606: Allow reconfigration after reset
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 4/5] iio: adc: ad7606: Add support for software mode for ad7616
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 2/5] iio: adc: ad7606: Move spi dependent features to spi file
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH 5/5] iio: adc: ad7606: Add debug mode for ad7616
  • From: Beniamin Bia <beniamin.bia@xxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: stm32: add syscfg to ADC on stm32mp157c
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 0/3] STM32 ADC analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: adc: stm32: add analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v2 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v4 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v4 0/1] iio: common: cros_ec_sensors: Add protocol v3 support
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH v3 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH] iio: common: cros_ec_sensors: fix semicolon.cocci warnings
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: kbuild test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: Add binding document for NOA1305
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] hwmon: Remove ads1015 driver
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 2/2] iio: add driver for PCT2075 temperature sensor
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• [PATCH 1/2] device-tree: iio: add bindings documentation for NXP PCT2075
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v4 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2] Documentation: ABI: iio: Add missing newline at end of file
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH v3 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support, features and cleanups for the 5.3 cycle.
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PULL] Second set of IIO new device support, features and cleanups for the 5.3 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 0/1] iio: common: cros_ec_sensors: Add protocol v3 support
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Wolfram Sang <wsa@xxxxxxxxxxxxx>
• [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add lsm6ds3tr-c device bindings
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 1/2] iio: imu: st_lsm6dsx: add support to LSM6DS3TR-C
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 0/2] add support to STM LSM6DS3TR-C 6-axis Mems sensor
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH 3/5] docs: i2c: convert to ReST and add to driver-api bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 5/5] docs: spi: convert to ReST and add it to the kABI bookset
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 0/5] Convert misc-devices, i2c, w1, spi and some markdown files to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH v2] staging: iio: ad7192: create of_device_id array
  • From: Bárbara Fernandes <barbara.fernandes@xxxxxx>
• [PATCH v4 3/4] iio: cros_ec_accel_legacy: Use cros_ec_sensors_core
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 2/4] iio: cros_ec_accel_legacy: Fix incorrect channel setting
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 1/4] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 4/4] iio: cros_ec_accel_legacy: Add support for veyron-minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v4 0/4] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: cros_ec : Extend legacy support to ARM device
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: Add binding document for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH 2/2] iio: light: noa1305: Add support for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: Add binding document for NOA1305
  • From: Martyn Welch <martyn.welch@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH v2 1/1] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v2 0/1] iio: common: cros_ec_sensors: Add protocol v3 support
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 02/43] docs: iio: convert to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• [PATCH 03/43] docs: hid: convert to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: common: cros_ec_sensors: set default frequencies
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PULL] Second set of IIO new device support, features and cleanups for the 5.3 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/34] treewide: simplify getting the adapter of an I2C client
  • From: Sebastian Reichel <sre@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: common: cros_ec_sensors: set default frequencies
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: cros_ec: Extend legacy support to ARM device
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• [PATCH 2/2] iio: common: cros_ec_sensors: set default frequencies
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH 1/2] iio: common: cros_ec_sensors: determine protocol version
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH 0/2] Add protocol v3 support
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: common: cros_ec_sensors: support protocol v3 message
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: "Ardelean, Alexandru" <alexandru.Ardelean@xxxxxxxxxx>
• [PATCH v2] iio: imu: mpu6050: add missing available scan masks
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH] iio: imu: mpu6050: add available scan masks
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• [PATCH v2] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 18/95] iio: temperature: mlx90632 Relax the compatibility check
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 17/95] iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.1 16/95] staging:iio:ad7150: fix threshold mode config bit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 04/35] staging:iio:ad7150: fix threshold mode config bit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• RE: [PATCH v3] hid: remove NO_D3 flag when remove driver
  • From: "Song, Hongyan" <hongyan.song@xxxxxxxxx>
• [PATCH AUTOSEL 4.9 03/21] staging:iio:ad7150: fix threshold mode config bit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 10/60] iio: temperature: mlx90632 Relax the compatibility check
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 09/60] staging:iio:ad7150: fix threshold mode config bit
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH v3] hid: remove NO_D3 flag when remove driver
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: cros_ec: Extend legacy support to ARM device
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Support accelerometers for veyron_minnie
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• RE: [PATCH 6/7] iio: make st_sensors driver use regmap
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PATCH v3 0/2] Support accelerometers for veyron_minnie
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH] Documentation: ABI: Add missing newline at end of file
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: frequency: adf4371: Add support for output stage mute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: frequency: adf4371: Add support for output stage mute
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 3/4] IIO: Ingenic JZ47xx: Set clock divider on probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: frequency: adf4371: Add support for output stage mute
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH 4/4] IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH] iio: srf04: fix wrong limitation in distance measuring
  • From: Zbyněk Kocur <zbynek.kocur@xxxxxxxxxxx>
• Re: [PATCH] iio: srf04: fix wrong limitation in distance measuring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: frequency: adf4371: Add support for output stage mute
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/4] iio: frequency: adf4371: Add support for ADF4372 PLL
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: frequency: Use dt-schema for clock-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: mpu6050: add available scan masks
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 5/5] dt-bindings: iio: adc: Add buffered input property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 3/5] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Support accelerometers for veyron_minnie
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: adis162xx: fix low-power docs & reports
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] iio: srf04: fix wrong limitation in distance measuring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] hid: remove NO_D3 flag when remove driver
  • From: Srinivas Pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/4] dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH V4 5/5] dt-bindings: iio: adc: Add buffered input property
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v3] hid: remove NO_D3 flag when remove driver
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Support accelerometers for veyron_minnie
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: common: cros_ec_sensors: support protocol v3 message
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH] iio: adis162xx: fix low-power docs & reports
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: cros_ec: Add lid angle driver
  • From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
• [PATCH 2/5] drivers: spi: core: Add optional stall delay between cs_change transfers
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: Add support for the ADIS16460 IMU
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 3/5] iio: imu: adis: Add support for SPI transfer cs_change_stall_delay_us
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• [PATCH 1/5] MAINTAINERS: add ADIS IMU driver library entry
  • From: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: frequency: Use dt-schema for clock-names
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxx>
• [PATCH V4 5/5] dt-bindings: iio: adc: Add buffered input property
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 3/5] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V4 1/5] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCHi V4 2/5] iio: adc: ad7124: Add buffered input support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH v3 2/2] iio: cros_ec: Extend legacy support to ARM device
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v3 0/2] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: frequency: Use dt-schema for clock-names
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 2/4] iio: frequency: adf4371: Add support for ADF4372 PLL
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH 4/4] iio: frequency: adf4371: Add support for output stage mute
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH 3/4] dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  • From: Stefan Popa <stefan.popa@xxxxxxxxxx>
• [PATCH] iio: imu: mpu6050: add available scan masks
  • From: Jean-Baptiste Maneyrol <JManeyrol@xxxxxxxxxxxxxx>
• Re: [PATCH V3 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: "Caprioru, Mircea" <Mircea.Caprioru@xxxxxxxxxx>
• Re: [PATCH V3 5/5] dt-bindings: iio: adc: Add buffered input property
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH V3 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH] iio: iio-utils: Fix possible incorrect mask calculation
  • From: Bastien Nocera <hadess@xxxxxxxxxx>
• [PATCH V3 5/5] dt-bindings: iio: adc: Add buffered input property
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 4/5] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 3/5] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 2/5] iio: adc: ad7124: Add buffered input support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V3 1/5] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio/adc: Add a compatible string for JZ4770 SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 4/4] IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 3/4] IIO: Ingenic JZ47xx: Set clock divider on probe
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH 2/4] dt-bindings: iio/adc: Add AUX2 channel idx for JZ4770 SoC ADC
  • From: Artur Rojek <contact@xxxxxxxxxxxxxx>
• [PATCH] iio: srf04: fix wrong limitation in distance measuring
  • From: Andreas Klinger <ak@xxxxxxxxxxxxx>
• [PATCH 2/2] *: convert stream-like files -> stream_open, even if they use noop_llseek
  • From: Kirill Smelkov <kirr@xxxxxxxxxx>
• [PATCH 14/14] iio: trig-sysfs: SPDX headers GPLv2.
  • From: jic23@xxxxxxxxxx
• [PATCH 13/14] iio: trig-loop: SPDX headers GPL-v2
  • From: jic23@xxxxxxxxxx
• [PATCH 12/14] iio: trig-interrupt: SPDX headers. GPLv2
  • From: jic23@xxxxxxxxxx
• [PATCH 11/14] iio: trig-hrtimer: SPDX header GPLv2
  • From: jic23@xxxxxxxxxx
• [PATCH 10/14] iio: triggered-buffer: SPDX + fix MODULE_LICENSE to GPLv2
  • From: jic23@xxxxxxxxxx
• [PATCH 09/14] iio: buffer-dmaengine: SPDX GPL-2.0+
  • From: jic23@xxxxxxxxxx
• [PATCH 08/14] iio: kfifo-buf: Add SPDX header
  • From: jic23@xxxxxxxxxx
• [PATCH 07/14] iio: buffer-cb: SPDX headers
  • From: jic23@xxxxxxxxxx
• [PATCH 06/14] iio:buffer-dma: SPDX headers.
  • From: jic23@xxxxxxxxxx
• [PATCH 05/14] iio: triggered-event: Add SPDX and fix header license to match the code.
  • From: jic23@xxxxxxxxxx
• [PATCH 04/14] iio: sw-trigger: SPDX headers.
  • From: jic23@xxxxxxxxxx
• [PATCH 03/14] iio: sw-device: SPDX headers
  • From: jic23@xxxxxxxxxx
• [PATCH 02/14] iio:configfs: SPDX headers.
  • From: jic23@xxxxxxxxxx
• [PATCH 01/14] iio: core: SPDX headers for core files. Note fix to MODULE_LICENSE
  • From: jic23@xxxxxxxxxx
• [PATCH 00/14] iio: SPDX headers for core + non device driver parts.
  • From: jic23@xxxxxxxxxx
• Re: [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo.bianconi83@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] staging: iio: ad7150: use ternary operating to ensure 0/1 value
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] Documentation: ABI: Add missing newline at end of file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: SRF04.c - wrong range for filter (line 145)
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 7/7] iio:common: make st_sensors_write_data_with_mask() inline
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 6/7] iio: make st_sensors driver use regmap
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/7] iio:accel: introduce st_accel_multiread_bit() function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/7] iio:common:st_sensors: add st_sensors_get_settings_index() helper function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/7] iio:st_sensors: make use of regmap API
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/8] iio: common: cros_ec_sensors: move channels to core structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/8] iio: common: cros_ec_sensors: use core structure
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/8] iio: common: cros_ec_sensors: move registration to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] docs: iio: add precision about sampling_frequency_available
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/8] iio: common: cros_ec_sensors: add sysfs attribute for frequencies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/8] iio: common: cros_ec_sensors: support protocol v3 message
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/8] iio: common: cros_ec_sensors: move registration to core
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: core: no need to check return value of debugfs_create functions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 22/29] docs: iio: convert to ReST
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: stm32-adc: add missing vdda-supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] dt-bindings: iio: adc: stm32: add missing vdda supply
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/5] iio: adc: stm32-dfsdm: add comment for 16 bits record
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: adc: stm32-dfsdm: add fast mode support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: adc: stm32-dfsdm: manage data resolution in trigger mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: adc: stm32-dfsdm: fix data type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: adc: stm32-dfsdm: fix output resolution
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: cros_ec : Extend legacy support to ARM device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] MAINTAINERS: add entry for sensirion sps30 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: chemical: sps30: convert bindings to yaml
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: sca3000: Potential endian bug in sca3000_read_event_value()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 2/4] iio: adc: ad7124: Add buffered input support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH][V3] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: cros_ec: Add lid angle driver
  • From: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>
• Re: [PATCH V2 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH V2 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 1/4] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 3/4] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH V2 2/4] iio: adc: ad7124: Add buffered input support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH] iio: sca3000: Potential endian bug in sca3000_read_event_value()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [PATCH v2 2/2] iio: cros_ec : Extend legacy support to ARM device
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH v2 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 0/2] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: chemical: sps30: convert bindings to yaml
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 2/2] MAINTAINERS: add entry for sensirion sps30 driver
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: chemical: sps30: convert bindings to yaml
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 0/2] iio: chemical: sps30: convert bindings to yaml
  • From: Tomasz Duszynski <tduszyns@xxxxxxxxx>
• [PATCH 2/2] iio: cros_ec : Extend legacy support to ARM device
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 1/2] iio: cros_ec: Add sign vector in core for backward compatibility
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• [PATCH 0/2] Support accelerometers for veyron_minnie
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [RESEND PATCH 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• Re: [PATCH v2 02/10] mfd / platform: cros_ec: Move cros-ec core driver out from MFD
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• Re: [PATCH 1/4] iio: adc: ad7124: Remove input number limitation
  • From: "Caprioru, Mircea" <Mircea.Caprioru@xxxxxxxxxx>
• Re: [PATCH v2 06/10] mfd / platform: cros_ec: Reorganize platform and mfd includes
  • From: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
• [RESEND PATCH 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [RESEND PATCH 3/4] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [RESEND PATCH 2/4] iio: adc: ad7124: Add buffered input support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [RESEND PATCH 1/4] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [RESEND PATCH 1/4] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 4/4] dt-bindings: iio: adc: Convert ad7124 documentation to YAML
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 3/4] iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 2/4] iio: adc: ad7124: Add buffered input support
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• [PATCH 1/4] iio: adc: ad7124: Remove input number limitation
  • From: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
• Re: [RFC] iio: adc: at91: fix acking DRDY irq (again)
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v7 2/2] iio: cros_ec: Add lid angle driver
  • From: Enric Balletbo Serra <eballetbo@xxxxxxxxx>
• Re: [PATCH 0/5] iio: adc: stm32-dfsdm: fix and improve output data managementiio: adc: stm32-dfsdm: fix and improve output data management
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH v1] iio: hid-sensor-attributes: Convert to use int_pow()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH 4/5] iio: adc: stm32-dfsdm: add fast mode support
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 3/5] iio: adc: stm32-dfsdm: manage data resolution in trigger mode
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 5/5] iio: adc: stm32-dfsdm: add comment for 16 bits record
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 1/5] iio: adc: stm32-dfsdm: fix output resolution
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 2/5] iio: adc: stm32-dfsdm: fix data type
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• [PATCH 0/5] iio: adc: stm32-dfsdm: fix and improve output data managementiio: adc: stm32-dfsdm: fix and improve output data management
  • From: Olivier Moysan <olivier.moysan@xxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 4/5] ARM: dts: stm32: add missing vdda-supply to adc on stm32429i-eval
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 2/5] iio: adc: stm32-adc: add missing vdda-supply
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 5/5] ARM: dts: stm32: add missing vdda-supply to adc on stm32h743i-eval
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 3/5] ARM: dts: stm32: remove fixed regulator unit address on stm32429i-eval
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 1/5] dt-bindings: iio: adc: stm32: add missing vdda supply
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH 0/5] Add missing vdda-supply to STM32 ADC
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• Re: [PATCH v3 0/8] Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH v2 22/29] docs: iio: convert to ReST
  • From: Mauro Carvalho Chehab <mchehab+samsung@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjær <sean@xxxxxxxxxx>
• Re: [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH] iio: core: no need to check return value of debugfs_create functions
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• [PATCH 5/5] iio: imu: st_lsm6dsx: add motion report function and call from interrupt
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 2/5] iio: imu: st_lsm6dsx: add motion events
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 4/5] iio: imu: st_lsm6dsx: always enter interrupt thread
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 3/5] iio: imu: st_lsm6dsx: add wakeup-source option
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 1/5] iio: imu: st_lsm6dsx: move interrupt thread to core
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH 0/5] iio: imu: st_lsm6dsx: add event reporting and wakeup
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• Re:
  • From: "Enrico Weigelt, metux IT consult" <lkml@xxxxxxxxx>
• Re: [PATCH 1/1] counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH v3 8/8] docs: iio: add precision about sampling_frequency_available
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 7/8] iio: common: cros_ec_sensors: add sysfs attribute for frequencies
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 6/8] iio: common: cros_ec_sensors: support protocol v3 message
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 5/8] iio: common: cros_ec_sensors: use core structure
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 4/8] iio: common: cros_ec_sensors: clean code
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 3/8] iio: common: cros_ec_sensors: move registration to core
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 2/8] iio: common: cros_ec_sensors: move channels to core structure
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 1/8] iio: common: cros_ec_sensors: move iio_info management to core
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH v3 0/8] Expose cros_ec_sensors frequency range via iio sysfs
  • From: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxx>
• [PATCH 1/1] counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  • From: Patrick Havelange <patrick.havelange@xxxxxxxxxxxxx>
• Re: [PATCH] counter: fix ftm-quaddec build error on UML
  • From: William Breathitt Gray <vilhelm.gray@xxxxxxxxx>
• [PATCH 6/7] iio: make st_sensors driver use regmap
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 7/7] iio:common: make st_sensors_write_data_with_mask() inline
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 5/7] iio:pressure: introduce st_pressure_multiread_bit() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 4/7] iio:gyro: introduce st_gyro_multiread_bit() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 3/7] iio:magn: introduce st_magn_multiread_bit() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 2/7] iio:accel: introduce st_accel_multiread_bit() function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 1/7] iio:common:st_sensors: add st_sensors_get_settings_index() helper function
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• [PATCH 0/7] iio:st_sensors: make use of regmap API
  • From: Denis Ciocca <denis.ciocca@xxxxxx>
• RE: [PATCH][V3] iio: st_accel: fix iio_triggered_buffer_{pre,post}enable positions
  • From: Denis CIOCCA <denis.ciocca@xxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.2 cycle.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: adc: ad7606: Add support for software mode for ad7616
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] counter: fix ftm-quaddec build error on UML
  • From: Richard Weinberger <richard@xxxxxx>
• SRF04.c - wrong range for filter (line 145)
  • From: Zbyněk Kocur <zbynek.kocur@xxxxxxxxxxx>
• Re: [PATCH] Staging: iio: adt7316: use correct headers for gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PULL] Second set of IIO fixes for the 5.2 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PULL] Second set of IIO fixes for the 5.1 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• [PULL] Second set of IIO fixes for the 5.1 cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: imu: st_lsm6dsx: add wake on accelerometer enable hook in sysfs
  • From: Sean Nyekjaer <sean@xxxxxxxxxx>
• [PATCH] counter: fix ftm-quaddec build error on UML
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [no subject]
  • From: "Grim, Dennis" <Dennis.Grim@xxxxxxxxxx>
• [PATCH] Documentation: ABI: Add missing newline at end of file
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: stm32-adc: add analog switches supply control
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
• [PATCH] Staging: iio: adt7316: use correct headers for gpio
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] staging: iio: ad7150: use ternary operating to ensure 0/1 value
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH] staging: iio: adt7316: Add missing include files
  • From: Yuehaibing <yuehaibing@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: adc: add adi,ad7780.yaml binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/3] iio: Add PAT9125 optical tracker sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: xilinx: support all platforms
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: humidity: Replace older GPIO APIs with GPIO Consumer APIs for the dht11 sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>