Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an
ERRPTR which we use in error handling.
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Generated with coccinelle. Build tested by me and buildbot. Not tested on HW.
drivers/iio/pressure/hp03.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/pressure/hp03.c b/drivers/iio/pressure/hp03.c
index f00102577fd5..026ba15ef68f 100644
--- a/drivers/iio/pressure/hp03.c
+++ b/drivers/iio/pressure/hp03.c
@@ -243,10 +243,10 @@ static int hp03_probe(struct i2c_client *client,
* which has it's dedicated I2C address and contains
* the calibration constants for the sensor.
*/
- priv->eeprom_client = i2c_new_dummy(client->adapter, HP03_EEPROM_ADDR);
- if (!priv->eeprom_client) {
+ priv->eeprom_client = i2c_new_dummy_device(client->adapter, HP03_EEPROM_ADDR);
+ if (IS_ERR(priv->eeprom_client)) {
dev_err(dev, "New EEPROM I2C device failed\n");
- return -ENODEV;
+ return PTR_ERR(priv->eeprom_client);
}
priv->eeprom_regmap = regmap_init_i2c(priv->eeprom_client,
--
2.20.1
