On Tue, 25 Jun 2019 15:48:40 +0300
Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote:
> All current ADIS162XX drivers have incorrect values defined via comments.
> Also, when an error is reported the printed value is incorrect.
>
> The functionality itself isn't affected, so it's not a critical issue.
>
> And since the change is trivial, it was included in a single patch that
> fixes these in one go. All values were correlated with the ones specified
> in the data-sheets.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Applied to the togreg branch of iio.git and pushed out as testing
for usual reasons.
Thanks,
Jonathan
> ---
> drivers/iio/accel/adis16201.c | 4 ++--
> drivers/iio/accel/adis16209.c | 4 ++--
> drivers/staging/iio/accel/adis16203.c | 4 ++--
> drivers/staging/iio/accel/adis16240.c | 2 +-
> 4 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/iio/accel/adis16201.c b/drivers/iio/accel/adis16201.c
> index 4c1d482ea73a..3257d4d27015 100644
> --- a/drivers/iio/accel/adis16201.c
> +++ b/drivers/iio/accel/adis16201.c
> @@ -71,7 +71,7 @@
> #define ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT 2
> /* Power supply above 3.625 V */
> #define ADIS16201_DIAG_STAT_POWER_HIGH_BIT 1
> -/* Power supply below 3.15 V */
> +/* Power supply below 2.975 V */
> #define ADIS16201_DIAG_STAT_POWER_LOW_BIT 0
>
> /* System Command Register Definition */
> @@ -231,7 +231,7 @@ static const char * const adis16201_status_error_msgs[] = {
> [ADIS16201_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> [ADIS16201_DIAG_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
> [ADIS16201_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> - [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> + [ADIS16201_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
> };
>
> static const struct adis_data adis16201_data = {
> diff --git a/drivers/iio/accel/adis16209.c b/drivers/iio/accel/adis16209.c
> index f2dc3a5f0463..01dd02f7e1d6 100644
> --- a/drivers/iio/accel/adis16209.c
> +++ b/drivers/iio/accel/adis16209.c
> @@ -73,7 +73,7 @@
> #define ADIS16209_STAT_FLASH_UPT_FAIL_BIT 2
> /* Power supply above 3.625 V */
> #define ADIS16209_STAT_POWER_HIGH_BIT 1
> -/* Power supply below 3.15 V */
> +/* Power supply below 2.975 V */
> #define ADIS16209_STAT_POWER_LOW_BIT 0
>
> #define ADIS16209_CMD_REG 0x3E
> @@ -241,7 +241,7 @@ static const char * const adis16209_status_error_msgs[] = {
> [ADIS16209_STAT_SPI_FAIL_BIT] = "SPI failure",
> [ADIS16209_STAT_FLASH_UPT_FAIL_BIT] = "Flash update failed",
> [ADIS16209_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> - [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> + [ADIS16209_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
> };
>
> static const struct adis_data adis16209_data = {
> diff --git a/drivers/staging/iio/accel/adis16203.c b/drivers/staging/iio/accel/adis16203.c
> index a5d974ac2e3b..39687139a7d3 100644
> --- a/drivers/staging/iio/accel/adis16203.c
> +++ b/drivers/staging/iio/accel/adis16203.c
> @@ -122,7 +122,7 @@
> /* Power supply above 3.625 V */
> #define ADIS16203_DIAG_STAT_POWER_HIGH_BIT 1
>
> -/* Power supply below 3.15 V */
> +/* Power supply below 2.975 V */
> #define ADIS16203_DIAG_STAT_POWER_LOW_BIT 0
>
> /* GLOB_CMD */
> @@ -234,7 +234,7 @@ static const char * const adis16203_status_error_msgs[] = {
> [ADIS16203_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
> [ADIS16203_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
> [ADIS16203_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
> - [ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 3.15V",
> + [ADIS16203_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
> };
>
> static const struct adis_data adis16203_data = {
> diff --git a/drivers/staging/iio/accel/adis16240.c b/drivers/staging/iio/accel/adis16240.c
> index b80c8529784b..62f4b3b1b457 100644
> --- a/drivers/staging/iio/accel/adis16240.c
> +++ b/drivers/staging/iio/accel/adis16240.c
> @@ -175,7 +175,7 @@
> /* Power supply above 3.625 V */
> #define ADIS16240_DIAG_STAT_POWER_HIGH_BIT 1
>
> - /* Power supply below 3.15 V */
> + /* Power supply below 2.225 V */
> #define ADIS16240_DIAG_STAT_POWER_LOW_BIT 0
>
> /* GLOB_CMD */
