Linux IIO Development

• Thread Index

• [PATCH v3 14/27] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 16/27] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 15/27] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 10/27] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 07/27] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 06/27] staging: iio: resolver: ad2s1210: sort imports
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 05/27] staging: iio: resolver: ad2s1210: remove spi_set_drvdata()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 04/27] staging: iio: resolver: ad2s1210: check return of ad2s1210_initial()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 03/27] staging: iio: resolver: ad2s1210: remove call to spi_setup()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 01/27] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 02/27] staging: iio: resolver: ad2s1210: fix use before initialization
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v3 00/27] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 02/11] dt-bindings: treewide: add access-controller description
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v5 10/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP15x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 08/11] arm64: dts: st: add RIFSC as an access controller for STM32MP25x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 11/11] ARM: dts: stm32: add ETZPC as a system bus for STM32MP13x boards
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 09/11] bus: etzpc: introduce ETZPC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 04/11] dt-bindings: bus: document ETZPC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 07/11] bus: rifsc: introduce RIFSC firewall controller driver
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 06/11] of: property: fw_devlink: Add support for "access-controller"
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 03/11] dt-bindings: bus: document RIFSC
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 02/11] dt-bindings: treewide: add access-controller description
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 00/11] Introduce STM32 Firewall framework
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• [PATCH v5 01/11] dt-bindings: document generic access controller
  • From: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [IGNORE][PATCH v4 01/11] dt-bindings: Document common device controller bindings
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 05/11] firewall: introduce stm32_firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Ceclan Dumitru-Ioan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 2/2] iio: adc: ad7173: add AD7173 driver
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: adc: add AD7173
  • From: Dumitru Ceclan <mitrutzceclan@xxxxxxxxx>
• [PATCH v2 2/2] iio: kx022a: Support ROHM KX132ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: "Andrew Jeffery" <andrew@xxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Denis Benato <benato.denis96@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH 2/2] iio: kx022a: Support ROHM KX132ACR-LBZ
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: Add KX132ACR-LBZ accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/2] Support ROHM KX132ACR-LBZ Accelerometer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v4 4/5] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 5/5] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 2/5] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 3/5] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 1/5] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v4 0/5] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• [PATCH v2 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v2 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] iio: imu: adis16475.c: Add buffer padding after temp channel
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] MAINTAINERS: fix Analog Devices website link
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/1] iio: imu: adis16475.c: Add buffer padding after temp channel
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• [PATCH 0/1] iio: imu: adis16475.c: Add buffer padding after temp
  • From: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v3 00/11] Introduce STM32 Firewall framework
  • From: Gatien CHEVALLIER <gatien.chevallier@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• [PATCH v2] iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1] iio: adc: aspeed: Support deglitch feature.
  • From: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/3] iio: imu: mpu6050: add level shifter flag
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 0/3] ARM: omap: omap4-embt2ws: Add IMU on control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: omap: omap4-embt2ws: Add IMU at control unit
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: imu: mpu6050: Add level shifter
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH v3 0/3] iio: adc: ad7192: Add improvements and feature
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 2/3] iio: adc: ad7192: Improve f_order computation
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: alisadariana@xxxxxxxxx
• [PATCH v3 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad7192: Correct reference voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx XADC fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad7192: Correct reference voltage
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH] iio: adc: ad7192: Correct reference voltage
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/3] iio: adc: ad7192: Add fast settling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1] iio: adc: MCP3564: fix the static checker warning
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: Add channel type for chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] iio: adc: ad7192: Correct reference voltage
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: sx9324: replace deprecated strncpy
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: for kernel comment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 6/6] counter: stm32-timer-cnt: add support for events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 5/6] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 4/6] counter: stm32-timer-cnt: introduce clock signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 0/6] counter: fix, improvements and stm32 timer events support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 1/6] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 2/6] counter: stm32-timer-cnt: rename quadrature signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 3/6] counter: stm32-timer-cnt: rename counter
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v3 6/6] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 5/6] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 4/6] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 3/6] iio: try searching for exact scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 2/6] iio: improve doc for available_scan_mask
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 1/6] tools: iio: iio_generic_buffer ensure alignment
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v3 0/6] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: (subset) [PATCH 4/8] mfd: stm32-timers: add support for interrupts
  • From: Lee Jones <lee@xxxxxxxxxx>
• [v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 14/19] staging: iio: resolver: ad2s1210: refactor setting excitation frequency
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 12/19] staging: iio: resolver: ad2s1210: rework gpios
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 16/19] staging: iio: resolver: ad2s1210: rename fexcit attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 10/19] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 17/19] staging: iio: resolver: ad2s1210: convert resolution to devicetree property
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 16/19] staging: iio: resolver: ad2s1210: rename fexcit attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 09/19] staging: iio: resolver: ad2s1210: use regmap for config registers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 2/2] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [v2 12/19] staging: iio: resolver: ad2s1210: rework gpios
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 06/19] staging: iio: resolver: ad2s1210: always use 16-bit value for raw read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 13/19] staging: iio: resolver: ad2s1210: implement hysteresis as channel attr
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: sx9324: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH v2 11/19] staging: iio: resolver: ad2s1210: remove config attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 00/19] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] dt-bindings: iio: adc: ti,ads1015: Document optional interrupt line
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 15/19] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/2] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 04/19] staging: iio: resolver: ad2s1210: fix not restoring sample gpio in channel read
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: adc: stm32-adc: replace deprecated strncpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [v2 18/19] staging: iio: resolver: ad2s1210: add phase_lock_range attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 8/8] counter: stm32-timer-cnt: add support for events
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 01/19] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 08/19] staging: iio: resolver: ad2s1210: use devicetree to get fclkin
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 10/19] staging: iio: resolver: ad2s1210: add debugfs reg access
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 11/19] staging: iio: resolver: ad2s1210: remove config attribute
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 07/19] staging: iio: resolver: ad2s1210: implement IIO_CHAN_INFO_SCALE
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 02/19] staging: iio: Documentation: document IIO resolver AD2S1210 sysfs attributes
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 15/19] staging: iio: resolver: ad2s1210: read excitation frequency from control register
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 03/19] staging: iio: resolver: ad2s1210: fix ad2s1210_show_fault
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [v2 19/19] staging: iio: resolver: ad2s1210: add triggered buffer support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• [v2 05/19] staging: iio: resolver: ad2s1210: fix probe
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH] iio: adc: for kernel comment
  • From: Andy Shen Shen <shengaoya@xxxxxxxxxx>
• Re: [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 7/9] iio: hid-sensor-als: Add light chromaticity support
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH 2/4] iio: sysfs: add IIO_DEVICE_ATTR_NAMED_RW macro
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 4/4] iio: resolver: add new driver for AD2S1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/4] staging: iio: resolver: remove ad2s1210 driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 1/4] dt-bindings: iio: resolver: add devicetree bindings for ad2s1210
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 0/4] iio: resolver: move ad2s1210 out of staging
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 3/9] iio: hid-sensor-als: Add light color temperature support
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/9] iio: hid-sensor-als: Use channel index to support more hub attributes
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 9/9] HID: amd_sfh: Add light chromaticity for SFH1.1
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 8/9] HID: amd_sfh: Add light chromaticity support
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 5/9] HID: amd_sfh: Add support for SFH1.1 light color temperature
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 4/9] HID: amd_sfh: Add support for light color temperature
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 45/49] iio: proximity: cros_ec_mkbp: Convert to platform remove callback returning void
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 2/3] iio: adc: ad7192: Improve f_order computation
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: alisadariana@xxxxxxxxx
• [PATCH v2 0/3] iio: adc: ad7192: Add improvements and feature
  • From: alisadariana@xxxxxxxxx
• [PATCH v1] iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  • From: Alexander Zangerl <az@xxxxxxxxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 18/49] iio: adc: qcom-pm8xxx-xoadc: Convert to platform remove callback returning void
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH 06/49] iio: adc: bcm_iproc: Convert to platform remove callback returning void
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH 24/49] iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 08/49] iio: adc: ep93xx: Convert to platform remove callback returning void
  • From: Alexander Sverdlin <alexander.sverdlin@xxxxxxxxx>
• [PATCH 00/49] iio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 43/49] iio: position: hid-sensor-custom-intel-hinge: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 44/49] iio: pressure: hid-sensor: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 41/49] iio: orientation: hid-sensor-incl-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 47/49] iio: temperature: hid-sensor: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 42/49] iio: orientation: hid-sensor-rotation: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 04/49] iio: adc: at91: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 38/49] iio: light: hid-sensor-prox: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 20/49] iio: adc: stm32-adc-core: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 40/49] iio: magnetometer: hid-sensor-magn-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 24/49] iio: adc: sun4i-gpadc-iio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 37/49] iio: light: hid-sensor-als: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 35/49] iio: humidity: hid-sensor-humidity: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 34/49] iio: gyro: hid-sensor-gyro-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 36/49] iio: light: cm3605: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 14/49] iio: adc: meson_saradc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 49/49] iio: trigger: stm32-timer: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 45/49] iio: proximity: cros_ec_mkbp: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 46/49] iio: proximity: srf04: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 32/49] iio: dac: stm32-dac: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 48/49] iio: trigger: iio-trig-interrupt: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 21/49] iio: adc: stm32-adc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 23/49] iio: adc: stm32-dfsdm-core: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 33/49] iio: dac: vf610: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 16/49] iio: adc: mxs-lradc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 39/49] iio: light: lm3533-als: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 31/49] iio: dac: stm32-dac-core: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 30/49] iio: dac: lpc18xx_dac: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 22/49] iio: adc: stm32-dfsdm-adc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 18/49] iio: adc: qcom-pm8xxx-xoadc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 28/49] iio: adc: vf610_adc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 26/49] iio: adc: twl4030-madc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 29/49] iio: dac: dpot-dac: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 27/49] iio: adc: twl6030-gpadc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 17/49] iio: adc: npcm: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 01/49] iio: accel: hid-sensor-accel-3d: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 25/49] iio: adc: ti_am335x_adc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 03/49] iio: adc: at91-sama5d2: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 13/49] iio: adc: imx93: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 12/49] iio: adc: imx8qxp: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 10/49] iio: adc: fsl-imx25-gcq: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 09/49] iio: adc: exynos: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 08/49] iio: adc: ep93xx: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 05/49] iio: adc: axp20x: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 19/49] iio: adc: rcar-gyroadc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 15/49] iio: adc: mp2629: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 11/49] iio: adc: hx711: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 06/49] iio: adc: bcm_iproc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 02/49] iio: adc: ab8500-gpadc: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 07/49] iio: adc: dln2: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• Re: [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: (subset) [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti_am335x_adc: Make DMAs optional
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti_am335x_adc: Make DMAs optional
  • From: Wadim Egorov <W.Egorov@xxxxxxxxx>
• [PATCH v2 5/9] HID: amd_sfh: Add support for SFH1.1 light color temperature
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 6/9] iio: Add channel type for chromaticity
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 4/9] HID: amd_sfh: Add support for light color temperature
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 7/9] iio: hid-sensor-als: Add light chromaticity support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 8/9] HID: amd_sfh: Add light chromaticity support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 9/9] HID: amd_sfh: Add light chromaticity for SFH1.1
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 3/9] iio: hid-sensor-als: Add light color temperature support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 0/9] Support light color temperature and chromaticity
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 2/9] iio: Add channel type light color temperature
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 1/9] iio: hid-sensor-als: Use channel index to support more hub attributes
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 3/3] iio: adc: ad7192: Add fast settling support
  • From: alisadariana@xxxxxxxxx
• [PATCH 2/3] iio: adc: ad7192: Improve f_order computation
  • From: alisadariana@xxxxxxxxx
• [PATCH 1/3] iio: adc: ad7192: Use bitfield access macros
  • From: alisadariana@xxxxxxxxx
• [PATCH 0/3] iio: adc: ad7192: Add improvements and new feature
  • From: alisadariana@xxxxxxxxx
• Re: [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add ltc2309 support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: iio: pressure: ms5611: ms5611_prom_is_valid false negative bug [PATCH]
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: hid-sensor-als: Add light color temperature support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH for-next v2 03/10] iio: accel: fxls8962af: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Richard Fitzgerald <rf@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH for-next v2 02/10] PM: Update EXPORT_*_DEV_PM_OPS() to EXPORT_*_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti_am335x_adc: Make DMAs optional
  • From: Bhavya Kapoor <b-kapoor@xxxxxx>
• Re: [PATCH for-next v2 02/10] PM: Update EXPORT_*_DEV_PM_OPS() to EXPORT_*_RUNTIME_PM_OPS()
  • From: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
• [PATCH for-next v2 10/10] ASoC: cs35l41: convert to EXPORT_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 09/10] mfd: cs42l43: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 08/10] mfd: arizona: convert to EXPORT_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 07/10] drm/imx/dcss: convert to EXPORT_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 06/10] iio: imu: inv_mpu: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 05/10] iio: imu: inv_icm42600: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 04/10] iio: gyro: fxas21002c: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 00/10] Fix symbol export for _SIMPLE_ variants of _PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 01/10] PM: Introduce export macros for _SIMPLE_ variants of _PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 03/10] iio: accel: fxls8962af: convert to EXPORT_NS_GPL_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• [PATCH for-next v2 02/10] PM: Update EXPORT_*_DEV_PM_OPS() to EXPORT_*_RUNTIME_PM_OPS()
  • From: Raag Jadav <raag.jadav@xxxxxxxxx>
• RE: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [RFC 0/2] iio: imu: Add driver and dt-bindings for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [RFC 1/2] dt-bindings: iio: imu: Add DT binding doc for BMI323
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [RFC 2/2] iio: imu: Add driver for BMI323 IMU
  • From: Jagath Jog J <jagathjog1996@xxxxxxxxx>
• [PATCH v1] iio: adc: MCP3564: fix the static checker warning
  • From: <marius.cristea@xxxxxxxxxxxxx>
• iio: pressure: ms5611: ms5611_prom_is_valid false negative bug [PATCH]
  • From: Alexander Zangerl <az@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: adc: provide max34408/9 device tree binding document
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH 2/2] iio: adc: Add driver support for MAX34408/9
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• [PATCH 0/2] Add maxim max34408/34409 ADC driver and dts
  • From: Ivan Mikhaylov <fr0st61te@xxxxxxxxx>
• Re: [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: hid-sensor-als: Add light color temperature support
  • From: Basavaraj Natikar <bnatikar@xxxxxxx>
• Re: [PATCH 0/8] Multiple light sensor support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 5/8] iio: Add channel for chromaticity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: hid-sensor-als: Add light color temperature support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] iio: hid-sensor-als: Use channel index to support more hub attributes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti_am335x_adc: Make DMAs optional
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RESEND PATCH] iio: addac: stx104: Add 8254 Counter/Timer support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v9 7/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 5/7] iio: accel: kionix-kx022a: Refactor driver and add chip_info structure
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 3/7] iio: accel: kionix-kx022a: Warn on failed matches and assume compatibility
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 4/7] iio: accel: kionix-kx022a: Add an i2c_device_id table
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 1/7] dt-bindings: iio: Add KX132-1211 accelerometer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 2/7] iio: accel: kionix-kx022a: Remove blank lines
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [PATCH v9 0/7] iio: accel: Add support for Kionix/ROHM KX132-1211 accelerometer
  • From: Mehdi Djait <mehdi.djait.k@xxxxxxxxx>
• [RESEND PATCH] iio: addac: stx104: Add 8254 Counter/Timer support
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [bug report] iio: adc: adding support for MCP3564 ADC
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH v2 3/3] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v2 0/3] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 0/2] Xilinx XADC fixes
  • From: Michal Simek <michal.simek@xxxxxxx>
• [PATCH 8/8] HID: amd_sfh: Add light chromaticity for SFH1.1
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 7/8] HID: amd_sfh: Add light chromaticity support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 6/8] iio: hid-sensor-als: Add light chromaticity support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 5/8] iio: Add channel for chromaticity
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 4/8] HID: amd_sfh: Add support for SFH1.1 light color temperature
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 3/8] HID: amd_sfh: Add support for light color temperature
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 2/8] iio: hid-sensor-als: Add light color temperature support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 1/8] iio: hid-sensor-als: Use channel index to support more hub attributes
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH 0/8] Multiple light sensor support
  • From: Basavaraj Natikar <Basavaraj.Natikar@xxxxxxx>
• [PATCH v2 1/2] iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• [PATCH v2 2/2] iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• [PATCH v2 0/2] Xilinx XADC fixes
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• [PATCH 1/2] iio: adc: xilinx-xadc: Don't clobber preset voltage/temperature thresholds
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• [PATCH 2/2] iio: adc: xilinx-xadc: Correct temperature offset/scale for UltraScale
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• [PATCH 0/2] Xilinx XADC fixes
  • From: Robert Hancock <robert.hancock@xxxxxxxxxx>
• Re: [bug report] iio: adc: adding support for MCP3564 ADC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [bug report] iio: adc: adding support for MCP3564 ADC
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• [PATCH] iio: adc: ti_am335x_adc: Make DMAs optional
  • From: Wadim Egorov <w.egorov@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [bug report] iio: adc: adding support for MCP3564 ADC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• [bug report] iio: adc: adding support for MCP3564 ADC
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH -next 2/2] iio: adc: mt6577_auxadc: Simplify with device managed function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: update channel function set
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: Kconfig: update ad74413r selections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH -next 1/2] iio: adc: mt6577_auxadc: Simplify with dev_err_probe()
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH -next 2/2] iio: adc: mt6577_auxadc: Simplify with device managed function
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• RE: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for HMC540S
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• RE: linux-next: Signed-off-by missing for commit in the iio tree
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• Re: linux-next: Signed-off-by missing for commit in the iio tree
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for HMC540S
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: addac: Kconfig: update ad74413r selections
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for HMC540S
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 2/2] dt-bindings: iio: hmc425a: add entry for HMC540S
  • From: "Hennerich, Michael" <Michael.Hennerich@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH v2] iio: light: vcnl4000: Don't power on/off chip in config
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• [PATCH] iio: addac: ad74413r: update channel function set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v8 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Don't power on/off chip in config
  • From: Mårten Lindahl <martenli@xxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3] iio: cros_ec: Fix the allocation size for cros_ec_command
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• Re: [PATCH v3] iio: cros_ec: Fix the allocation size for cros_ec_command
  • From: patchwork-bot+chrome-platform@xxxxxxxxxx
• [PATCH] iio: ad4310: Replace devm_clk_register() with devm_clk_hw_register()
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add ltc2309 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: pressure: dps310: Adjust Timeout Settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bno055: Fix missing Kconfig dependencies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V2 RESEND] iio: pressure: ms5637: Use i2c_get_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: vcnl4000: Don't power on/off chip in config
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH AUTOSEL 4.14 06/12] iio: core: Use min() instead of min_t() to make code more robust
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH AUTOSEL 4.19 06/14] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 4.14 06/12] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 06/14] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 07/16] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 12/19] tools: iio: iio_generic_buffer: Fix some integer type and calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 07/19] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 14/24] tools: iio: iio_generic_buffer: Fix some integer type and calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 08/24] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 14/25] tools: iio: iio_generic_buffer: Fix some integer type and calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 08/25] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 15/28] tools: iio: iio_generic_buffer: Fix some integer type and calculation
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.5 08/28] iio: core: Use min() instead of min_t() to make code more robust
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Benjamin Bara <bbara93@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [GIT PULL] First set of Counter fixes for 6.6
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH v2 2/3] iio: pressure: bmp280: Use i2c_get_match_data
  • From: Angel Iglesias <ang.iglesiasg@xxxxxxxxx>
• [PATCH] iio: light: vcnl4000: Don't power on/off chip in config
  • From: Mårten Lindahl <marten.lindahl@xxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v8 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH v2 2/3] iio: pressure: bmp280: Use i2c_get_match_data
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v8 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v1 1/1] iio: pressure: dps310: Adjust Timeout Settings
  • From: Lakshmi Yadlapati <lakshmiy@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add ROHM BM1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 2/3] iio: pressure: Support ROHM BU1390
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: Add ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/3] Support ROHM BM1390 pressure sensor
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH 2/3] iio: adc: ltc2309: switch to new .probe()
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [linux][PATCH] counter: microchip-tcb-capture: Fix the use of internal GCLK logic
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: 杨明金 <magicyangmingjin@xxxxxxxxx>
• RE: [PATCH] iio: adc: imx8qxp: Fix address for command buffer registers
  • From: Bough Chen <haibo.chen@xxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [linux][PATCH] counter: microchip-tcb-capture: Fix the use of internal GCLK logic
  • From: Dharma Balasubiramani <dharma.b@xxxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: adc: Add TI TWL603X GPADC
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] RFC: iio: lsm6dsx: Support temperature channel on some devices
  • From: Andy Spencer <aspencer@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH v2] RFC: iio: lsm6dsx: Support temperature channel on some devices
  • From: Andy Spencer <aspencer@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Lars-Peter Clausen <lars@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• [PATCH] iio: adc: imx8qxp: Fix address for command buffer registers
  • From: Philipp Rossak <embed3d@xxxxxxxxx>
• Re: [PATCH 2/8] counter: chrdev: remove a typo in header file comment
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 1/8] counter: chrdev: fix getting array extensions
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 5/8] counter: stm32-timer-cnt: rename quadrature signal
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [PATCH 0/8] counter: fix, improvements and stm32 timer events support
  • From: William Breathitt Gray <william.gray@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-ads1015: support deferred probe
  • From: Tomas Melin <tomas.melin@xxxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Mighty <bavishimithil@xxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Mighty <bavishimithil@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: Add edge trigger support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH] iio: imu: bno055: Fix missing Kconfig dependencies
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH V2 RESEND] iio: pressure: ms5637: Use i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/4] Match data improvements for mcp4725 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Match data improvements for adxl345 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ltc2497: Simplify probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: Simplify probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-adc081c: Simplify probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1015: Add edge trigger support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 4/4] iio: dac: mcp4725: Add dac_reg_offset to struct mcp4725_chip_info
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 3/4] iio: dac: mcp4725: Add use_ext_ref_voltage to struct mcp4725_chip_info
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 2/4] iio: dac: mcp4725: Use i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/4] iio: dac: mcp4725: Replace variable 'id' from struct mcp4725_data
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 0/4] Match data improvements for mcp4725 driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: pressure: dps310: Adjust Timeout Settings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/2] iio: adc: adding support for MCP3564 ADC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add ltc2309 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: fix function prefix typo
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH] iio: imu: bno055: Fix missing Kconfig dependencies
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] io: adc: stm32-adc: fix potential NULL pointer dereference in stm32_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v3 0/2] Match data improvements for adxl345 driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 2/2] iio: accel: adxl345: Simplify adxl345_read_raw()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] iio: accel: adxl345: Convert enum->pointer for data in match data table
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2] iio: afe: rescale: Accept only offset channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH] iio: adc: ltc2497: Simplify probe()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-ads1015: Simplify probe()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-adc081c: Simplify probe()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v9 0/4] Add support for Allwinner GPADC on D1/T113s/R329/T507 SoCs
  • From: patchwork-bot+linux-riscv@xxxxxxxxxx
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• [PATCH] iio: adc: ti-ads1015: Add edge trigger support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [RFC v2 01/11] iio: introduce iio backend device
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v3 0/5] Add RZ/G2UL MTU3a support
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC v2 03/11] dt-bindings: iio: stm32-dfsdm-adc: add scaling support
  • From: Olivier MOYSAN <olivier.moysan@xxxxxxxxxxx>
• Re: [PATCH v4 0/6] iio: Add buffer write() support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 0/3] Add converter framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [RFC PATCH 0/3] Add converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] RFC: iio: lsm6dsx: Support temperature channel on some devices
  • From: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] Add converter framework
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] iio: addac: ad74413r: fix function prefix typo
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 0/6] iio: Add buffer write() support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 0/6] iio: Add buffer write() support
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH] iio: addac: ad74413r: fix function prefix typo
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH] iio: afe: rescale: Accept only offset channels
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] iio: light: opt4001: Use i2c_get_match_data()
  • From: Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@xxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Accept only offset channels
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: 杨明金 <magicyangmingjin@xxxxxxxxx>
• Re: [RFC PATCH 3/3] iio: adc: adi-axi-adc: add based on new converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 0/3] Add converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 1/3] iio: addac: add new converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 8/8] counter: stm32-timer-cnt: add support for events
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RFC PATCH 0/3] Add converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [RFC PATCH 2/3] iio: adc: ad9647: add based on converter framework
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: Guenter Roeck <groeck@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: sx9310: Convert enum->pointer for match data table
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: Stephen Boyd <swboyd@xxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• [PATCH v1 0/1] iio: pressure: dps310: Adjust Timeout Settings
  • From: Lakshmi Yadlapati <lakshmiy@xxxxxxxxxx>
• [PATCH v1 1/1] iio: pressure: dps310: Adjust Timeout Settings
  • From: Lakshmi Yadlapati <lakshmiy@xxxxxxxxxx>
• Re: [PATCH 8/8] counter: stm32-timer-cnt: add support for events
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v5 2/2] iio: adc: adding support for MCP3564 ADC
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v5 0/2] Adding support for Microchip MCP3564 ADC family
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: iio: adc: adding MCP3564 ADC
  • From: <marius.cristea@xxxxxxxxxxxxx>
• [PATCH 1/8] counter: chrdev: fix getting array extensions
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• RE: [PATCH v2 1/2] iio: dac: ti-dac5571: Use i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 3/8] tools/counter: add a flexible watch events tool
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• RE: [PATCH v2 2/2] iio: dac: mcp4725: Use i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2] iio: accel: adxl345: Convert enum->pointer for data in match data table
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v2] iio: accel: adxl345: Convert enum->pointer for data in match data table
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 6/8] counter: stm32-timer-cnt: introduce clock signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 8/8] counter: stm32-timer-cnt: add support for events
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 0/8] counter: fix, improvements and stm32 timer events support
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 7/8] counter: stm32-timer-cnt: populate capture channels and check encoder
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 2/8] counter: chrdev: remove a typo in header file comment
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 5/8] counter: stm32-timer-cnt: rename quadrature signal
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 4/8] mfd: stm32-timers: add support for interrupts
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/3] types: Complement the aligned types with signed 64-bit one
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: hid-sensor: Use aligned data type for timestamp
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: imu: st_lsm6dsx: Use aligned data type for timestamp
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: adding support for MCP3564 ADC
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: adding support for MCP3564 ADC
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• [PATCH v2] RFC: iio: lsm6dsx: Support temperature channel on some devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: lsm6dsx: Support temperature channel
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 2/2] iio: adc: adding support for MCP3564 ADC
  • From: <Marius.Cristea@xxxxxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v8 6/7] iio: accel: kionix-kx022a: Add a function to retrieve number of bytes in buffer
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v3 2/2] iio: adc: add ltc2309 support
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v2] iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  • From: Tzung-Bi Shih <tzungbi@xxxxxxxxxx>
• [PATCH v3 2/2] iio: adc: add ltc2309 support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: adc: add lltc,ltc2309 bindings
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• [PATCH v3 0/2] iio: adc: add LTC2309 support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add ltc2309 support
  • From: Liam Beguin <liambeguin@xxxxxxxxx>
• Re: [PATCH] iio: chemical: sgp30: Convert enum->pointer for data in the match tables
  • From: Andreas Brauchli <a.brauchli@xxxxxxxxxxxxxxx>
• Re: IIO this cycle.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: afe: rescale: Fix logic bug
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: admv1013: add mixer_vgate corner cases
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 0/3] Add new channels for adis16475
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/6] device property: Add fwnode_property_match_property_string()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: adc: add AD717X
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: dac: stm32-dac: Use correct header(s) instead of string_helpers.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: msa311: Use correct header(s) instead of string_helpers.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/1] iio: accel: kionix-kx022a: Use correct header(s) instead of string_helpers.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: tmp117: Convert enum->pointer for data in the match tables
  • From: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: adc: ad717x: add AD717X driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: lsm6dsx: Support temperature channel
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] io: adc: stm32-adc: fix potential NULL pointer dereference in stm32_adc_probe()
  • From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
• Re: [PATCH -next] iio: Remove unused declarations
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: temperature: tmp117: Convert enum->pointer for data in the match tables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: light: opt4001: Use i2c_get_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: ad5110: Use i2c_get_match_data()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: potentiometer: ds1803: Convert enum->pointer for data in the ID table
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] io: adc: stm32-adc: fix potential NULL pointer dereference in stm32_adc_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: chemical: sgp30: Convert enum->pointer for data in the match tables
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] types: Complement the aligned types with signed 64-bit one
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: hid-sensor: Use aligned data type for timestamp
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: imu: st_lsm6dsx: Use aligned data type for timestamp
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] io: adc: stm32-adc: fix potential NULL pointer dereference in stm32_adc_probe()
  • From: Zhang Shurong <zhang_shurong@xxxxxxxxxxx>
• RE: [PATCH] iio: mlx90614: Use i2c_get_match_data()
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH V0 1/2] dt-bindings: iio: adc: Add support for ump518 pmic adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH V0 2/2] iio: adc: sprd_pmic_adc: Add support for UMP serise pmic adc
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>