Re: [PATCH 1/8] iio: adc: ad9467: fix reset gpio handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 5, 2023 at 11:06 AM Nuno Sa via B4 Relay
<devnull+nuno.sa.analog.com@xxxxxxxxxx> wrote:
>
> From: Nuno Sa <nuno.sa@xxxxxxxxxx>
>
> The reset gpio was being requested with GPIOD_OUT_LOW which means, not
> asserted. Then it was being asserted but never de-asserted which means
> the devices was left in reset. Fix it by de-asserting the gpio.
>
> While at it, moved the handling to it's own function and dropped
> 'reset_gpio' from the 'struct ad9467_state' as we only need it during
> probe. On top of that, refactored things so that we now request the gpio
> asserted (i.e in reset) and then de-assert it. Also note that we now use
> gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
> already request the pin as output.
>
> Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
> Signed-off-by: Nuno Sa <nuno.sa@xxxxxxxxxx>
> ---
>  drivers/iio/adc/ad9467.c | 33 ++++++++++++++++++++-------------
>  1 file changed, 20 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c
> index 39eccc28debe..5ecf486bf5d1 100644
> --- a/drivers/iio/adc/ad9467.c
> +++ b/drivers/iio/adc/ad9467.c
> @@ -121,7 +121,6 @@ struct ad9467_state {
>         unsigned int                    output_mode;
>
>         struct gpio_desc                *pwrdown_gpio;
> -       struct gpio_desc                *reset_gpio;
>  };
>
>  static int ad9467_spi_read(struct spi_device *spi, unsigned int reg)
> @@ -378,6 +377,23 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv)
>         return ad9467_outputmode_set(st->spi, st->output_mode);
>  }
>
> +static int ad9467_reset(struct device *dev)
> +{
> +       struct gpio_desc *gpio;
> +
> +       gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
> +       if (IS_ERR(gpio))
> +               return PTR_ERR(gpio);
> +       if (!gpio)
> +               return 0;

same comment as before about replacing two ifs with one:

        if (IS_ERR_OR_NULL(gpio))
                return PTR_ERR_OR_ZERO(gpio);


> +
> +       fsleep(1);
> +       gpiod_set_value_cansleep(gpio, 0);
> +       fsleep(10 * USEC_PER_MSEC);
> +
> +       return 0;
> +}
> +
>  static int ad9467_probe(struct spi_device *spi)
>  {
>         const struct ad9467_chip_info *info;
> @@ -408,18 +424,9 @@ static int ad9467_probe(struct spi_device *spi)
>         if (IS_ERR(st->pwrdown_gpio))
>                 return PTR_ERR(st->pwrdown_gpio);
>
> -       st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset",
> -                                                GPIOD_OUT_LOW);
> -       if (IS_ERR(st->reset_gpio))
> -               return PTR_ERR(st->reset_gpio);
> -
> -       if (st->reset_gpio) {
> -               udelay(1);
> -               ret = gpiod_direction_output(st->reset_gpio, 1);
> -               if (ret)
> -                       return ret;
> -               mdelay(10);
> -       }
> +       ret = ad9467_reset(&spi->dev);
> +       if (ret)
> +               return ret;
>
>         conv->chip_info = &info->axi_adc_info;
>
>
> --
> 2.43.0
>
>

With the suggested change above:

Reviewed-by: David Lechner <dlechner@xxxxxxxxxxxx>





[Index of Archives]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Input]     [Linux Kernel]     [Linux SCSI]     [X.org]

  Powered by Linux