Linux IIO Development

• Thread Index

• [PATCH v8 7/7] iio: accel: adxl345: complete the list of defines
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 6/7] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 5/7] iio: accel: adxl345: initialize FIFO delay value for SPI
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v7 6/7] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 4/7] iio: accel: adxl345: introduce interrupt handling
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 2/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 0/7] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v7 7/7] iio: accel: adxl345: complete the list of defines
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v1 0/3] dt-bindings: iio: imu: add missing property type
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: Merge of fixes-togreg inside testing?
  • From: Jonathan Cameron <jic23@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: opt3001: Add Support for opt3004 light sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 2/2] iio: light: opt3001: Add Support for opt3004 light sensor
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: iio: adc: add AD7191
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Merge of fixes-togreg inside testing?
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: iio: light: opt3001: add compatible for opt3004
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: opt3001: Add Support for opt3004 light sensor
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 2/3] iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 1/3] iio: adc: meson: fix voltage reference selection field name typo
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 0/3] iio: adc: meson: a few improvements
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• [PATCH v2 4/4] iio: veml3235: fix scale to conform to ABI
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 3/4] iio: light: veml3235: extend regmap to add cache
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 2/4] iio: light: veml3235: fix code style
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 1/4] iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH v2 0/4] iio: light: fix scale in veml3235 and add helpers to iio-gts
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: adc: Add rockchip,rk3562-saradc string
  • From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
• [PATCH 2/2] iio: adc: rockchip_saradc: add rk3562
  • From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
• [PATCH RFC v2 0/4] iio: adc: ad7380: add alert support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC v2 1/4] iio: adc: ad7380: do not use iio_device_claim_direct_scoped anymore
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC v2 4/4] docs: iio: ad7380: add alert support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC v2 3/4] iio: adc: ad7380: add alert support
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH RFC v2 2/4] iio: adc: ad7380: enable regmap cache
  • From: Julien Stephan <jstephan@xxxxxxxxxxxx>
• [PATCH 2/2] iio: light: opt3001: Add Support for opt3004 light sensor
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: iio: light: opt3001: add compatible for opt3004
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• [PATCH 0/2] iio: light: opt3001: Add Support for OPT3004 Light Sensor
  • From: Hardevsinh Palaniya <hardevsinh.palaniya@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
  • From: Alex Lanzano <lanzano.alex@xxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: ad4695: add offload-based oversampling support
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH 2/2] iio: veml3235: fix scale to conform to ABI
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 15/20] iio: buffer: Make timestamp s64 in iio_push_to_buffers_with_timestamp()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 00/20] IIO: Tidying up timestamp alignment markings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/6] docs: iio: ad4030: add documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 8/8] iio: adc: ad4851: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 7/8] dt-bindings: iio: adc: add ad4851
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 1/8] iio: backend: add API for interface get
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: veml3235: fix scale to conform to ABI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: adc: ad7191: add AD7191
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: iio: adc: add AD7191
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/3] iio: adc: ad_sigma_delta: Add CS assert function
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: veml3235: fix scale to conform to ABI
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v1 2/3] dt-bindings: iio: adc: add AD7191
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: veml3235: fix scale to conform to ABI
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2] iio: gts: Simplify available scale table build
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 0/3] Support ROHM BD79703 DAC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH 1/2] iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH v1 3/3] iio: adc: ad7191: add AD7191
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: iio: adc: add AD7191
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v1 1/3] iio: adc: ad_sigma_delta: Add CS assert function
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• [PATCH v0 0/3] Add support for AD7191
  • From: Alisa-Dariana Roman <alisadariana@xxxxxxxxx>
• Re: [PATCH 13/20] iio: adc: Use aligned_s64 instead of open coding alignment.
  • From: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
• Re: [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] iio: ABI: combine current input sections
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adf4371: add refin mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: Add Intel Dollar Cove TI PMIC ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 1/2] iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 2/2] iio: veml3235: fix scale to conform to ABI
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• [PATCH 0/2] iio: light: fix scale in veml3235 and add helpers to iio-gts
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v2 3/9] iio: trigger: stm32-timer: add support for stm32mp25
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: gts: Simplify available scale table build
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: proximity: hx9023s: Added firmware file parsing functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/3] Support ROHM BD79703 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: iio: adf4371: add refin mode
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 6/8] iio: dac: ad3552r-hs: exit for error on wrong chip id
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 00/38] rockchip: Add rk3562 support
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/8] iio: backend: add API for interface configuration
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH v9 4/8] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 8/8] iio: adc: ad4851: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 2/8] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 7/8] dt-bindings: iio: adc: add ad4851
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 6/8] iio: adc: adi-axi-adc: add oversampling
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 5/8] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 3/8] iio: backend: add API for oversampling
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v9 1/8] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 00/38] rockchip: Add rk3562 support
  • From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
• [PATCH v2 5/9] pwm: stm32: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 7/9] arm64: dts: st: add timer nodes on stm32mp251
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 8/9] arm64: dts: st: add timer pins for stm32mp257f-ev1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 6/9] arm64: defconfig: enable STM32 timers drivers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 2/9] mfd: stm32-timers: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 3/9] iio: trigger: stm32-timer: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 1/9] dt-bindings: mfd: stm32-timers: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 9/9] arm64: dts: st: add timer nodes on stm32mp257f-ev1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 0/9] Add STM32MP25 timers support: MFD, PWM, IIO and counter drivers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v2 4/9] counter: stm32-timer-cnt: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH v3 3/3] iio: frequency: adf4371: add ref doubler
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 2/3] iio: frequency: adf4371: add refin mode
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: iio: adf4371: add refin mode
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v3 0/3] ADF4371 refin mode and doubler support
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 6/8] iio: dac: ad3552r-hs: exit for error on wrong chip id
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v1 3/3] dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 2/3] dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 1/3] dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v1 0/3] dt-bindings: iio: imu: add missing property type
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH] iio: adc: Add Intel Dollar Cove TI PMIC ADC driver
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices
  • From: Kees Bakker <kees@xxxxxxxxxxxx>
• Re: [RFC PATCH 3/4] iio: adc: Add support for AD4170
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH] iio: ABI: combine current input sections
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v3 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• Re: [PATCH v9 4/9] mfd: add base driver for qnap-mcu devices
  • From: Kees Bakker <kees@xxxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add ROHM BD79703
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: media: clarify stm32 csi & simplify example
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: bno055: constify 'struct bin_attribute'
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/4] iio: core: mark scan_timestamp as __private
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 7/7] docs: iio: add documentation for adis16550 driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/4] iio: adc: max1363: make use of iio_is_soft_ts_enabled()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/4] iio: adc: dln2-adc: zero full struct instead of just the padding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 6/7] iio: imu: adis16550: add adis16550 support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: Add adis16550 bindings
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/7] iio: imu: adis: Remove documented not used elements
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hid-sensor-prox: Split difference from multiple channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 3/7] iio: imu: adis: Add reset to custom ops
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ABI: document in_illuminance_hardwaregain
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 7/8] iio: dac: ad3552r-hs: add ad3541/2r support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] iio: backend: add API for interface configuration
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 6/8] iio: dac: ad3552r-hs: exit for error on wrong chip id
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] iio: backend: add API for interface configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/8] iio: dac: ad3552r-hs: clear reset status flag
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/8] iio: dac: ad3552r-common: fix ad3541/2r ranges
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 4/8] iio: backend: add API for interface configuration
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: dac: ad7293: enable power before reset
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: adc: ad4695: add offload-based oversampling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v2 6/6] docs: iio: ad4030: add documentation
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 5/6] iio: adc: ad4030: add support for ad4632-16 and ad4632-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 2/6] iio: adc: ad4030: add driver for ad4030-24
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 4/6] iio: adc: ad4030: add support for ad4630-24 and ad4630-16
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 3/6] iio: adc: ad4030: add averaging support
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: iio: adc: add ADI ad4030, ad4630 and ad4632
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• [PATCH v2 0/6] iio: adc: ad4030: new driver for AD4030 and similar ADCs
  • From: Esteban Blanc <eblanc@xxxxxxxxxxxx>
• Re: [PATCH 2/2] doc: iio: ad4695: describe oversampling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 0/2] iio: adc: ad4695: add oversampling support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: media: clarify stm32 csi & simplify example
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: ABI: use Y consistently as channel number
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: dac: ad5624r: Drop docs of missing members
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v10 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/9] iio: trigger: stm32-timer: add support for stm32mp25
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad_sigma_delta: Use `unsigned int` instead of plain `unsigned`
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 3/4] iio: adc: Add support for AD4170
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 3/4] iio: adc: Add support for AD4170
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/4] dt-bindings: iio: adc: Add AD4170
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 2/4] dt-bindings: iio: adc: Add AD4170
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH 4/4] Documentation: iio: Add ADC documentation
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/3] iio: dac: Support ROHM BD79703 DAC
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: iio: dac: ad5624r_spi.c - use of scan_type
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 3/3] MAINTAINERS: Add maintainer for ROHM BD79703
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 2/3] iio: dac: Support ROHM BD79703 DAC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: Add ROHM BD79703
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH 0/3] Support ROHM BD79703 DAC
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/3] iio: frequency: adf4371: add ref doubler
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [RFC PATCH 3/4] iio: adc: Add support for AD4170
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [RFC PATCH 1/4] include: dt-bindings: iio: adc: Add defines for AD4170
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: iio: dac: ad5624r_spi.c - use of scan_type
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 4/9] counter: stm32-timer-cnt: add support for stm32mp25
  • From: William Breathitt Gray <wbg@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: (subset) [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: iio: dac: ad5624r_spi.c - use of scan_type
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [RFC PATCH 4/4] Documentation: iio: Add ADC documentation
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [RFC PATCH 2/4] dt-bindings: iio: adc: Add AD4170
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/9] dt-bindings: mfd: stm32-timers: add support for stm32mp25
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RFC PATCH 2/4] dt-bindings: iio: adc: Add AD4170
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [RFC PATCH 4/4] Documentation: iio: Add ADC documentation
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [RFC PATCH 2/4] dt-bindings: iio: adc: Add AD4170
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [RFC PATCH 3/4] iio: adc: Add support for AD4170
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [RFC PATCH 0/4] Add support for AD4170
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [RFC PATCH 1/4] include: dt-bindings: iio: adc: Add defines for AD4170
  • From: Marcelo Schmitt <marcelo.schmitt@xxxxxxxxxx>
• [PATCH] iio: adc: ad_sigma_delta: Use `unsigned int` instead of plain `unsigned`
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v10 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v10 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v10 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH 5/9] pwm: stm32: add support for stm32mp25
  • From: Uwe Kleine-König <ukleinek@xxxxxxxxxx>
• [PATCH 8/9] arm64: dts: st: add timer pins for stm32mp257f-ev1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 9/9] arm64: dts: st: add timer nodes on stm32mp257f-ev1
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 7/9] arm64: dts: st: add timer nodes on stm32mp251
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 2/9] mfd: stm32-timers: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 4/9] counter: stm32-timer-cnt: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 6/9] arm64: defconfig: enable STM32 timers drivers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 0/9] Add STM32MP25 timers support: MFD, PWM, IIO and counter drivers
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 1/9] dt-bindings: mfd: stm32-timers: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 5/9] pwm: stm32: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• [PATCH 3/9] iio: trigger: stm32-timer: add support for stm32mp25
  • From: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx>
• iio: dac: ad5624r_spi.c - use of scan_type
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: dac: ad5624r: Drop docs of missing members
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH 1/2] iio: adc: ad4695: add offload-based oversampling support
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH 2/2] doc: iio: ad4695: describe oversampling support
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• [PATCH 0/2] iio: adc: ad4695: add oversampling support
  • From: Trevor Gamblin <tgamblin@xxxxxxxxxxxx>
• Re: [PATCH 2/9] dt-bindings: media: clarify stm32 csi & simplify example
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 02/17] spi: offload: add support for hardware triggers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v6 13/17] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 06/17] spi: dt-bindings: axi-spi-engine: add SPI offload properties
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v6 03/17] dt-bindings: trigger-source: add generic PWM trigger source
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [GIT PULL] Immutable branch between MFD, HID, HWMON, Input and LEDs due for the v6.14 merge window
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 17/17] iio: dac: ad5791: Add offload support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 16/17] iio: dac: ad5791: sort include directives
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 14/17] iio: adc: ad4695: Add support for SPI offload
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 11/17] iio: adc: ad7944: add support for SPI offload
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 10/17] iio: adc: ad7944: don't use storagebits for sizing
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 09/17] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_with_handle()
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 08/17] iio: buffer-dmaengine: split requesting DMA channel from allocating buffer
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 07/17] spi: axi-spi-engine: implement offload support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 05/17] spi: add offload TX/RX streaming APIs
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 04/17] spi: offload-trigger: add PWM trigger driver
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 02/17] spi: offload: add support for hardware triggers
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 01/17] spi: add basic support for SPI offloading
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v3 6/7] iio: imu: adis16550: add adis16550 support
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v6 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH 4/8] iio: backend: add API for interface configuration
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v2] iio: dac: ad7293: enable power before reset
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: iio: adxl367: add support for adxl366
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] iio: ABI: use Y consistently as channel number
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• [PATCH v3 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• [PATCH v3 0/2] Add support for Avago/Broadcom APDS9160
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• Re: [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2] iio: dac: ad7293: enable power before reset
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 8/8] iio: dac: ad3552r-hs: update function name (non functional)
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 7/8] iio: dac: ad3552r-hs: add ad3541/2r support
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 6/8] iio: dac: ad3552r-hs: exit for error on wrong chip id
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 5/8] iio: dac: adi-axi-dac: add bus mode setup
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 4/8] iio: backend: add API for interface configuration
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 3/8] iio: dac: adi-axi-dac: modify stream enable
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 2/8] iio: dac: ad3552r-hs: clear reset status flag
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 0/8] iio: ad3552r-hs: add support for ad3541/42r
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• [PATCH 1/8] iio: dac: ad3552r-common: fix ad3541/2r ranges
  • From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Fix Regression with AXP20X for 6.13-rc1
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 0/2] Fix Regression with AXP20X for 6.13-rc1
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v3 5/7] dt-bindings: iio: Add adis16550 bindings
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PULL] IIO: 1st set of fixes for 6.13
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 7/7] docs: iio: add documentation for adis16550 driver
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 6/7] iio: imu: adis16550: add adis16550 support
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 5/7] dt-bindings: iio: Add adis16550 bindings
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 4/7] iio: imu: adis: Add DIAG_STAT register size
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 3/7] iio: imu: adis: Add reset to custom ops
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 2/7] iio: imu: adis: Add custom ops struct
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 0/7] Add support for ADIS16550 and ADIS16550W
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v3 1/7] iio: imu: adis: Remove documented not used elements
  • From: Robert Budai <robert.budai@xxxxxxxxxx>
• [PATCH v2] iio: hid-sensor-prox: Split difference from multiple channels
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• [PATCH v2] iio: gts: Simplify available scale table build
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH 18/20] iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
  • From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@xxxxxxx>
• Re: [PATCH] iio: proximity: hx9023s: Added firmware file parsing functionality
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v2] iio: proximity: hx9023s: Added firmware file parsing functionality
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• Re: [PATCH 06/20] iio: pressure: Use aligned_s64 instead of open coding alignment.
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v7 2/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 08/20] iio: light: Use aligned_s64 instead of open coding alignment.
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [RFC PATCH] iio: gts: Simplify available scale table build
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [PATCH] iio: ABI: document in_illuminance_hardwaregain
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH 00/20] IIO: Tidying up timestamp alignment markings.
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 15/20] iio: buffer: Make timestamp s64 in iio_push_to_buffers_with_timestamp()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 01/20] iio: adc: ad7944: Fix sign and use aligned_s64 for timestamp.
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 20/20] iio: adc: rockchip: correct alignment of timestamp
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 18/20] iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 19/20] iio: adc: mt6360: Correct marking of timestamp alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 17/20] iio: chemical: scd4x: switch timestamp type from int64_t __aligned(8) to aligned_s64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 16/20] iio: adc: ti-lmp92064: Switch timestamp type from int64_t __aligned(8) to aligned_s64
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 15/20] iio: buffer: Make timestamp s64 in iio_push_to_buffers_with_timestamp()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 14/20] iio: accel: bma220: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 13/20] iio: adc: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 11/20] iio: gyro: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 12/20] iio: chemical: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 10/20] iio: humidity: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 09/20] iio: imu: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 08/20] iio: light: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 07/20] iio: magnetometer: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 06/20] iio: pressure: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 05/20] iio: proximity: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 04/20] iio: resolver: ad2s1210: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 03/20] iio: temperature: tmp006: Use aligned_s64 instead of open coding alignment.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 02/20] io: adc: ina2xx-adc: Fix sign and use aligned_s64 for timestamp.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 01/20] iio: adc: ad7944: Fix sign and use aligned_s64 for timestamp.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH 00/20] IIO: Tidying up timestamp alignment markings.
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] iio: imu: bno055: constify 'struct bin_attribute'
  • From: Thomas Weißschuh <linux@xxxxxxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v4] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: add support for veml3235
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC] iio: adc: ad7173: add openwire detection support for single conversions
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: ad5791: ldac gpio is active low
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: hid-sensor-prox: Fix invalid read_raw for attention
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [RFC PATCH] iio: gts: Simplify available scale table build
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: iio: adf4371: add differential ref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ti-ads124s08: Switch to fsleep()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v2] iio: adc: ti-ads124s08: Switch to fsleep()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3 1/1] dt-bindings: iio: pressure: bmp085: Add SPI interface
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: hx9023s: Added firmware file parsing functionality
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 9/9] iio: adc: ad7606: Add support for writing registers when using backend
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 6/9] iio: adc: adi-axi-adc: Add support for AD7606 register writing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 5/9] iio: adc: adi-axi-adc: Add platform children support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 4/9] iio: adc: ad7606: Move software functions into common file
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v4] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH] dt-bindings: iio: dac: ad5791: ldac gpio is active low
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v2 4/4] iio: core: mark scan_timestamp as __private
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 3/4] iio: common: ssp_sensors: drop conditional optimization for simplicity
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 2/4] iio: adc: max1363: make use of iio_is_soft_ts_enabled()
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 1/4] iio: adc: dln2-adc: zero full struct instead of just the padding
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v2 0/4] iio: mark scan_timestamp as __private
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v2 1/9] iio: adc: ad7606: Fix hardcoded offset in the ADC channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 17/17] iio: dac: ad5791: Add offload support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 13/17] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 10/17] iio: adc: ad7944: don't use storagebits for sizing
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: add support for veml3235
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v6 09/17] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_with_handle()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 08/17] iio: buffer-dmaengine: split requesting DMA channel from allocating buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 06/17] spi: dt-bindings: axi-spi-engine: add SPI offload properties
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 05/17] spi: add offload TX/RX streaming APIs
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 03/17] dt-bindings: trigger-source: add generic PWM trigger source
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v3] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH RFC v2 3/5] thermal: qcom: Add support for MBG thermal monitoring
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] iio: accel: adxl367: add support for adxl366
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/2] dt-bindings: iio: adxl367: add support for adxl366
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 8/8] iio: adc: ad4851: add ad485x driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 3/8] iio: backend: add API for oversampling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v8 5/8] iio: adc: adi-axi-adc: set data format
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 7/7] iio: accel: adxl345: complete the list of defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 6/7] iio: accel: adxl345: add FIFO with watermark events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 4/7] iio: accel: adxl345: introduce interrupt handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 2/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 2/7] iio: accel: adxl345: complete the list of defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: Add support for D3-323-AA Pyroelectric IR sensor
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v8 8/8] iio: adc: ad4851: add ad485x driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 3/8] iio: backend: add API for oversampling
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 2/8] iio: backend: add support for data size set
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 7/8] dt-bindings: iio: adc: add ad4851
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v8 1/8] iio: backend: add API for interface get
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v7 7/7] iio: accel: adxl345: complete the list of defines
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 6/7] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 5/7] iio: accel: adxl345: initialize FIFO delay value for SPI
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 4/7] iio: accel: adxl345: introduce interrupt handling
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 2/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v7 0/7] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v8 8/8] iio: adc: ad4851: add ad485x driver
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 7/8] dt-bindings: iio: adc: add ad4851
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 6/8] iio: adc: adi-axi-adc: add oversampling
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 3/8] iio: backend: add API for oversampling
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 4/8] iio: adc: adi-axi-adc: add interface type
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 5/8] iio: adc: adi-axi-adc: set data format
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 2/8] iio: backend: add support for data size set
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v8 1/8] iio: backend: add API for interface get
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/5] Add support for MBG Thermal monitoring device
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/5] dt-bindings: thermal: Add MBG thermal monitor support
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• Re: [PATCH RFC v2 3/5] thermal: qcom: Add support for MBG thermal monitoring
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
• [PATCH v1 2/2] dt-bindings: iio: adxl367: add support for adxl366
  • From: Darius Berghe <darius.berghe@xxxxxxxxxx>
• [PATCH v1 1/2] iio: accel: adxl367: add support for adxl366
  • From: Darius Berghe <darius.berghe@xxxxxxxxxx>
• [PATCH v1 0/2] iio: accel: adxl367: add support for adxl366
  • From: Darius Berghe <darius.berghe@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/5] Add support for MBG Thermal monitoring device
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC v2 2/5] dt-bindings: mfd: qcom,spmi-pmic: Add MBG thermal monitor ref
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC v2 0/5] Add support for MBG Thermal monitoring device
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/5] dt-bindings: thermal: Add MBG thermal monitor support
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: Add support for D3-323-AA Pyroelectric IR sensor
  • From: Hermes Zhang <chenhuiz@xxxxxxxx>
• Re: [PATCH v3] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: "Javier Carrasco" <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH v3] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH v3] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
• Re: [PATCH RFC v2 2/5] dt-bindings: mfd: qcom,spmi-pmic: Add MBG thermal monitor ref
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH RFC v2 1/5] dt-bindings: thermal: Add MBG thermal monitor support
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v9 0/9] Drivers to support the MCU on QNAP NAS devices
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: Add support for D3-323-AA Pyroelectric IR sensor
  • From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
• [PATCH RFC v2 5/5] arm64: dts: qcom: sa8775p-pmics: Add support for MBG TM
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH RFC v2 0/5] Add support for MBG Thermal monitoring device
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH RFC v2 4/5] arm64: dts: qcom: sa8775p-pmics: Add vadc support on SA8775P
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH RFC v2 3/5] thermal: qcom: Add support for MBG thermal monitoring
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH RFC v2 2/5] dt-bindings: mfd: qcom,spmi-pmic: Add MBG thermal monitor ref
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• [PATCH RFC v2 1/5] dt-bindings: thermal: Add MBG thermal monitor support
  • From: Satya Priya Kakitapalli <quic_skakitap@xxxxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] driver core: Split devres APIs to device/devres.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v1 0/2] driver core: move devres APIs to a separate header
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v5 2/5] iio: consumers: copy/release available info from producer to fix race
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v6 2/7] iio: accel: adxl345: complete the list of defines
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v6 4/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v6 2/7] iio: accel: adxl345: complete the list of defines
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: Add support for D3-323-AA Pyroelectric IR sensor
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [Bug 219418] BOSC0200 Accelerometer Invalid chip 12 initialization error
  • From: bugzilla-daemon@xxxxxxxxxx
• [PATCH v6 7/7] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 6/7] iio: accel: adxl345: initialize FIFO delay value for SPI
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 5/7] iio: accel: adxl345: introduce interrupt handling
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 4/7] dt-bindings: iio: accel: adxl345: make interrupts not a required property
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 3/7] dt-bindings: iio: accel: adxl345: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 2/7] iio: accel: adxl345: complete the list of defines
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 1/7] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 0/7] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH 0/2] Fix Regression with AXP20X for 6.13-rc1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Fix Regression with AXP20X for 6.13-rc1
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-prox: Merge information from different channels
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PULL] IIO: 1st set of fixes for 6.13
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• [PATCH v6 15/17] doc: iio: ad4695: add SPI offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 16/17] iio: dac: ad5791: sort include directives
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 17/17] iio: dac: ad5791: Add offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 14/17] iio: adc: ad4695: Add support for SPI offload
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 13/17] dt-bindings: iio: adc: adi,ad4695: add SPI offload properties
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 11/17] iio: adc: ad7944: add support for SPI offload
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 12/17] doc: iio: ad7944: describe offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 10/17] iio: adc: ad7944: don't use storagebits for sizing
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 09/17] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_with_handle()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 07/17] spi: axi-spi-engine: implement offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 08/17] iio: buffer-dmaengine: split requesting DMA channel from allocating buffer
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 06/17] spi: dt-bindings: axi-spi-engine: add SPI offload properties
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 05/17] spi: add offload TX/RX streaming APIs
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 04/17] spi: offload-trigger: add PWM trigger driver
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 03/17] dt-bindings: trigger-source: add generic PWM trigger source
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 02/17] spi: offload: add support for hardware triggers
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 01/17] spi: add basic support for SPI offloading
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH v6 00/17] spi: axi-spi-engine: add offload support
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 10/10] iio: adc: ad7124: Implement temperature measurement
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 11/15] iio: adc: rzg2l_adc: Add suspend/resume support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 03/10] iio: accel: adxl345: measure right-justified
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 00/10] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: accel: adxl345: rename variable data to st
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-prox: Merge information from different channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] driver core: Split devres APIs to device/devres.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: srinivas pandruvada <srinivas.pandruvada@xxxxxxxxxxxxxxx>
• [PATCH v9 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v9 0/2] Support for Texas Instruments OPT4060 RGBW Color sensor.
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• [PATCH v9 1/2] dt-bindings: iio: light: Document TI OPT4060 RGBW sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v8 2/2] iio: light: Add support for TI OPT4060 color sensor
  • From: Per-Daniel Olsson <perdaniel.olsson@xxxxxxxx>
• Re: [PATCH v2 14/15] arm64: dts: renesas: r9a08g045: Add ADC node
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2 15/15] arm64: dts: renesas: rzg3s-smarc-som: Enable ADC
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 14/15] arm64: dts: renesas: r9a08g045: Add ADC node
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Jiri Kosina <jikos@xxxxxxxxxx>
• Re: [PATCH v9 1/9] HID: hid-sensor-hub: don't use stale platform-data on remove
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 1/2] iio: core: Add devm_ API for iio_channel_get_sys
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 0/2] Fix Regression with AXP20X for 6.13-rc1
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• [PATCH 2/2] power: supply: axp20x: Use devm_iio_channel_get_sys() for iio chans
  • From: Chris Morgan <macroalpha82@xxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 04/10] iio: accel: adxl345: add function to switch measuring mode
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v5 02/10] iio: accel: adxl345: rename variable data to st
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v2 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: "Rob Herring (Arm)" <robh@xxxxxxxxxx>
• [PATCH v2 9/9] iio: adc: ad7606: Add support for writing registers when using backend
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 7/9] iio: adc: ad7606: change r/w_register signature
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 8/9] iio: adc: ad7606: Change channel macros parameters
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 6/9] iio: adc: adi-axi-adc: Add support for AD7606 register writing
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 4/9] iio: adc: ad7606: Move software functions into common file
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 5/9] iio: adc: adi-axi-adc: Add platform children support
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 2/9] dt-bindings: iio: dac: adi-axi-adc: Add ad7606 variant
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 3/9] iio:adc: ad7606: Move the software mode configuration
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 1/9] iio: adc: ad7606: Fix hardcoded offset in the ADC channels
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• [PATCH v2 0/9] Add support for Software mode on AD7606's iio backend driver
  • From: Guillaume Stols <gstols@xxxxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH V4 2/4] dt-bindings: iio: adc: Add support for QCOM PMIC5 Gen3 ADC
  • From: Jishnu Prakash <quic_jprakash@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Yu-Hsian Yang <j2anfernee@xxxxxxxxx>
• [PATCH] iio: proximity: hx9023s: Added firmware file parsing functionality
  • From: Yasin Lee <yasin.lee.x@xxxxxxxxx>
• [PATCH v3 1/1] dt-bindings: iio: pressure: bmp085: Add SPI interface
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [PATCH v3 0/1] iio: pressure: bmp280: Minor cleanup
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• Re: [PATCH v5 3/3] iio: chemical: bme680: add power management
  • From: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
• [no subject]
  • From: Unknown
• Re: [PATCH v5 03/10] iio: accel: adxl345: measure right-justified
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• [PATCH v2] iio: adc: ti-ads124s08: Switch to fsleep()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads124s08: Switch to fsleep()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH] iio: adc: ti-ads124s08: Switch to fsleep()
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: [PATCH v7 7/8] dt-bindings: iio: adc: add ad4851
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: adc: ad7192: Add sync gpio
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH RFC] iio: adc: ad7173: add openwire detection support for single conversions
  • From: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
• RE: [PATCH v7 5/8] iio: adc: adi-axi-adc: set data format
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• RE: [PATCH v7 7/8] dt-bindings: iio: adc: add ad4851
  • From: "Miclaus, Antoniu" <Antoniu.Miclaus@xxxxxxxxxx>
• Re: [PATCH v4 3/3] arm64: dts: imx93-9x9-qsb: add temp-sensor nxp,p3t1085
  • From: Shawn Guo <shawnguo2@xxxxxxxx>
• [PATCH v2 2/3] iio: frequency: adf4371: add differential ref
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 3/3] iio: frequency: adf4371: add ref doubler
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH v2 1/3] dt-bindings: iio: adf4371: add differential ref
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  • From: Matteo Martelli <matteomartelli3@xxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v6 10/10] iio: adc: ad7124: Implement temperature measurement
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: rzg2l_adc: Add support for Renesas RZ/G3S
  • From: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
• Re: [PATCH v2] iio: kx022a: document new chip_info structure members
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• [RFC PATCH] iio: gts: Simplify available scale table build
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 1/2] driver core: Split devres APIs to device/devres.h
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 11/15] iio: adc: rzg2l_adc: Add suspend/resume support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 10/15] iio: adc: rzg2l_adc: Add support for channel 8
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 09/15] iio: adc: rzg2l_adc: Prepare for the addition of RZ/G3S support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 08/15] iio: adc: rzg2l_adc: Enable runtime PM autosuspend support
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 07/15] iio: adc: rzg2l_adc: Simplify the locking scheme in rzg2l_adc_read_raw()
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 06/15] iio: adc: rzg2l_adc: Use read_poll_timeout()
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 05/15] iio: adc: rzg2l_adc: Switch to RUNTIME_PM_OPS() and pm_ptr()
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 04/15] iio: adc: rzg2l_adc: Simplify the runtime PM code
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-prox: Merge information from different channels
  • From: Ricardo Ribalda <ribalda@xxxxxxxxxxxx>
• Re: [PATCH v2 03/15] iio: adc: rzg2l_adc: Use devres helpers to request pre-deasserted reset controls
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 02/15] iio: adc: rzg2l_adc: Convert dev_err() to dev_err_probe()
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v2 01/15] clk: renesas: r9a08g045: Add clocks, resets and power domain support for the ADC IP
  • From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx>
• Re: [PATCH v3 0/2] iio: adc: ad7173: add calibration support to chip family
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 0/4] Timestamp and PulSAR support for ad4000
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: adc: ad7192: Add sync gpio
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 01/11] iio: temperature: tmp006: fix information leak in triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/16] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: kx022a: document new chip_info structure members
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/2] iio: consumers: ensure read buffers for labels and ext_info are page aligned
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 3/3] iio: pressure: bmp280: Make time vars intuitive and move to fsleep
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 2/3] iio: pressure: bmp280: Use sizeof() for denominator
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/1] Documentation: ABI: IIO: Re-add filter_type/filter_mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2] iio: kx022a: document new chip_info structure members
  • From: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>
• Re: [PATCH v2] iio: kx022a: document new chip_info structure members
  • From: Mehdi Djait <mehdi.djait@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 3/3] iio: chemical: bme680: add power management
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: imu: st_lsm6dsx: don't always auto-enable I2C, I3C and SPI interface drivers
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] dt-bindings: iio: accel: fxls8962af: add wakeup-source property
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: adc: add Nuvoton NCT720x ADC driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v1 1/2] driver core: Split devres APIs to device/devres.h
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads1119: fix sample size in scan struct for triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: as73211: fix channel handling in only-color triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] iio: temperature: tmp006: fix information leak in triggered buffer
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: inkern: call iio_device_put() only on mapped devices
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 3/3] iio: frequency: adf4371: add ref doubler
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: iio: adf4371: add differential ref
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: hid-sensor-prox: Merge information from different channels
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 10/10] iio: accel: adxl345: add FIFO with watermark events
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 09/10] iio: accel: adxl345: prepare channel for scan_index
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 08/10] iio: accel: adxl345: initialize FIFO delay value for SPI
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 07/10] iio: accel: adxl345: introduce interrupt handling
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 05/10] iio: accel: adxl345: complete list of defines
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 04/10] iio: accel: adxl345: add function to switch measuring mode
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 03/10] iio: accel: adxl345: measure right-justified
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 02/10] iio: accel: adxl345: rename variable data to st
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 01/10] iio: accel: adxl345: refrase comment on probe
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 06/10] dt-bindings: iio: accel: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v5 06/10] dt-bindings: iio: accel: add interrupt-names
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: Initialize i2c_device_id structures by name
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91: call input_free_device() on allocated iio_dev
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: at91: call input_free_device() on allocated iio_dev
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH] iio: adc: ti-ads124s08: Use gpiod_set_value_cansleep()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 13/15] iio: adc: rzg2l_adc: Add support for Renesas RZ/G3S
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 03/15] iio: adc: rzg2l_adc: Use devres helpers to request pre-deasserted reset controls
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2 02/15] iio: adc: rzg2l_adc: Convert dev_err() to dev_err_probe()
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: kx022a: document new chip_info structure members
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v2] iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: proximity: aw96103: Constify struct iio_info
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 09/14] iio: adc: rzg2l_adc: Add support for channel 8
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH 08/14] iio: adc: rzg2l_adc: Prepare for the addition of RZ/G3S support
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: at91: call input_free_device() on allocated iio_dev
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Disable all channels at probe time
  • From: Jonathan Cameron <jic23@xxxxxxxxxx>
• Re: [PATCH v7 8/8] iio: adc: ad4851: add ad485x driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v5 06/10] dt-bindings: iio: accel: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH] iio: adc: at91: call input_free_device() on allocated iio_dev
  • From: Joe Hattori <joe@xxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v6 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4
  • From: Frank Li <Frank.li@xxxxxxx>
• Re: [PATCH v6 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code
  • From: Frank Li <Frank.li@xxxxxxx>
• [PATCH v6 2/2] iio: adc: vf610_adc: limit i.MX6SX's channel number to 4
  • From: Frank Li <Frank.Li@xxxxxxx>
• [PATCH v6 1/2] iio: adc: vf610_adc: use devm_* and dev_err_probe() to simple code
  • From: Frank Li <Frank.Li@xxxxxxx>
• Re: [PATCH v1 1/4] iio: afe: rescale: Don't use ^ for booleans
  • From: Peter Rosin <peda@xxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH] iio: proximity: aw96103: Constify struct iio_info​
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 10/16] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v5 10/16] iio: buffer-dmaengine: add devm_iio_dmaengine_buffer_setup_ext2()
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• Re: [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• RE: [PATCH v1 1/4] iio: afe: rescale: Don't use ^ for booleans
  • From: David Laight <David.Laight@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• Re: [PATCH v5 06/10] dt-bindings: iio: accel: add interrupt-names
  • From: Lothar Rubusch <l.rubusch@xxxxxxxxx>
• [PATCH v6 10/10] iio: adc: ad7124: Implement temperature measurement
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 05/10] iio: adc: ad_sigma_delta: Handle CS assertion as intended in ad_sd_read_reg_raw()
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 04/10] iio: adc: ad_sigma_delta: Add support for reading irq status using a GPIO
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 01/10] iio: adc: ad7124: Don't create more channels than the driver can handle
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 09/10] iio: adc: ad7124: Add error reporting during probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 07/10] iio: adc: ad_sigma_delta: Store information about reset sequence length
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 08/10] iio: adc: ad_sigma_delta: Check for previous ready signals
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 06/10] iio: adc: ad_sigma_delta: Fix a race condition
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 02/10] iio: adc: ad7124: Refuse invalid input specifiers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 03/10] dt-bindings: iio: adc: adi,ad7{124,173,192,780}: Allow specifications of a gpio for irq line
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v6 00/10] iio: adc: ad7124: Various fixes
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• Re: [PATCH v5 06/10] dt-bindings: iio: accel: add interrupt-names
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2] iio: adc: ad9467: Fix the "don't allow reading vref if not available" case
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc <mgonellabolduc@xxxxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Disable all channels at probe time
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: iio: light: Add APDS9160 binding
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• [PATCH v2 0/2] Add support for Avago/Broadcom APDS9160
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• [PATCH v2 2/2] iio: light: Add APDS9160 ALS & Proximity sensor driver
  • From: Mikael Gonella-Bolduc via B4 Relay <devnull+mgonellabolduc.dimonoff.com@xxxxxxxxxx>
• Re: [PATCH] iio: adc: ad7124: Disable all channels at probe time
  • From: David Lechner <dlechner@xxxxxxxxxxxx>
• [PATCH 3/3] iio: frequency: adf4371: add ref doubler
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 2/3] iio: frequency: adf4371: add differential ref
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• [PATCH 1/3] dt-bindings: iio: adf4371: add differential ref
  • From: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>
• Re: [PATCH v1 1/4] iio: afe: rescale: Don't use ^ for booleans
  • From: "'Andy Shevchenko'" <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 01/15] clk: renesas: r9a08g045: Add clocks, resets and power domain support for the ADC IP
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• RE: [PATCH v1 1/4] iio: afe: rescale: Don't use ^ for booleans
  • From: David Laight <David.Laight@xxxxxxxxxx>
• [PATCH v2 15/15] arm64: dts: renesas: rzg3s-smarc-som: Enable ADC
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 14/15] arm64: dts: renesas: r9a08g045: Add ADC node
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 13/15] iio: adc: rzg2l_adc: Add support for Renesas RZ/G3S
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 12/15] dt-bindings: iio: adc: renesas,rzg2l-adc: Document RZ/G3S SoC
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 10/15] iio: adc: rzg2l_adc: Add support for channel 8
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 11/15] iio: adc: rzg2l_adc: Add suspend/resume support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 09/15] iio: adc: rzg2l_adc: Prepare for the addition of RZ/G3S support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 08/15] iio: adc: rzg2l_adc: Enable runtime PM autosuspend support
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 07/15] iio: adc: rzg2l_adc: Simplify the locking scheme in rzg2l_adc_read_raw()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 06/15] iio: adc: rzg2l_adc: Use read_poll_timeout()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 05/15] iio: adc: rzg2l_adc: Switch to RUNTIME_PM_OPS() and pm_ptr()
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>
• [PATCH v2 04/15] iio: adc: rzg2l_adc: Simplify the runtime PM code
  • From: Claudiu <claudiu.beznea@xxxxxxxxx>